Checklist for apache server and form server

Hi,
When some thing wrong happen to Apache server
please tell me the checklist for apache simillarly for form server
Thanks

I would recommend the following notes:
Note: 244274.1 - Oracle Application Object Library Generic Service Management (GSM) Setup Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=244274.1
Note: 200360.1 - Oracle Application Object Library Concurrent Manager Setup Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200360.1
Note: 398624.1 - Oracle Application Object Library Concurrent Manager Test Set
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=398624.1
Note: 370317.1 - Oracle Application Object Library Concurrent Processing Data Collection Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=370317.1
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
One more Note which helps to make sure that all necessary components of Oracle applications are up and running before releasing the instance to end-users:
Note: 283976.1 - Applications 11i Health Check After Maintenance
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=283976.1

Similar Messages

Apache and form server check

HI,
i have three nodes in middle tier and each node contains apache and form server , so now how to check these servers is up or not?

The Enterprise Manager Console lets you administer your servers.
See the Administrator's Guide for details. I think it really helps if you read that guide.
http://download-uk.oracle.com/docs/cd/B14099_17/idmanage.htm

Infrastructure and forms server into same machine

Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]

Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

ARCHITECTURE OF SAP R/3 AND APPLICATION SERVER AND DATABASE SERVER IN ABAP

ARCHITECTURE OF SAP R/3 AND APPLICATION SERVER AND DATABASE SERVER IN ABAP?
PLEASE EXPLAIN

hi
Presentation Server
It is actually a program named sapgui.exe.
It usually installed in users workstation.
The interface accepts the input from the user in the form of keystrokes, mouse-clicks, and function keys, and sends these requests to the application server.
It receives and displays the result from the application server.
Application Server
An application server is a set of executables that collectively interpret the the ABAP/4 programs.
Each application server has a profile called application server profile, that specifies its characteristics when it starts up and while it is running. It specifies:
1. Number of processes and its types.
2.Amount of memory each process may use.
3. Length of time a user is inactive before being automatically logged off.
If your ABAP/4 program requests information from the database, the application server will format the request and send it to the database server
Database Server
The database server is a set of executables that accepts database requests from the application server.
These requests are passed on to the RDBMS (Relation Database Management System).
The RDBMS sends the data back to the application server.
The RDBMS may run on database servers computer or may be installed on its own computer.
The components of application server are dispatcher, dispatcher queue, work process.
All requests that come in from presentation servers are directed first to the dispatcher.
The dispatcher writes them to the dispatcher queue.
The dispatcher pulls the requests from the queue on a first-in, first-out basis.
Each request is then allocated to the first available work process.
A work process handles one request at a time.
The work process needs two memory areas, the user context and the roll area.
The user context is a memory area that contains the information about the user.
The roll area is a memory area that contains about the program execution.
User Context
User context is a memory area that contains the characteristics of a user that is logged on the R/3 system.
1)It holds, users current settings.
2. The users authorizations.
3. The names of the programs the user is currently running.
When a user logs on, the user context is allocated for that logon. When logs off, it is freed.
Roll Area 
A roll area is a memory that is allocated by a work process for an instance of a program.
It holds the information needed by R/3 about the program execution, such as: 1. The values of the variables
2. The dynamic memory allocations
3. The current program pointer.
Each time a user starts a program, a roll area is created for that instance of the program.
If two users are using the same program at the same time, two roll areas will exist-one for each user.
The roll area is freed when the program ends.
Both roll area and the user context play an important roll in dialog processing
pls reward points dor useful ans
regards
vivek
Message was edited by:
 Vivek Saxena

Profile server and ldap server login

To enable my portal to have anonymous login and skip the login menu, from the admin console, i've added "Membership" and "Ldap" under the interactive mode section. This is to allow Ldap or Membership authentication methods enabled at the anonymous page. I tried to use the default login channel to log into the portal using LDAP authentication, but it doesn't work. I can log into the portal via the login channel using "Membership" authentication method. But somehow i have no idea how to "integrate" my membership (profile) authentication with Ldap authentication. (Syncs between profile server and LDAP Server for user name and password). Anyone out there have any idea what went wrong here? Thanks a lot.

The sp3a release notes shows how you can modify the login channel to work with other authentication modules.
The sample given is for unix authentication to make that sample work for ldap authentication take a copy of that sample
cp display_iwtAuthUnix.html display_iwtAuthLdap.html
now look for form action and replace the form action from /login/Unix to /login/Ldap, now follow the instructions given in the sp3a release notes, replace unix with ldap everywhere and it should work ..

Mail, iCal Server and iChat server will not work over VPN

I have an Airport Extreme Base Station at the office running the network. Behind it sits a Mac Mini Snow Leopard server running 10.6.3. The ports necessary for Mail, iCal Server and iChat work fine through that external connection. I can also connect with VPN from my 10.6.3 clients.
HOWEVER, when I connect with the VPN clients, I am suddenly unable to access the Mail, iCal Server, Wiki server and iChat server. All connections time out. I can ping the server and I can do other things that do NOT work on the public Airport like ssh or VNC. ssh and VNC are closed at the airport extreme.
So it's pretty odd. When I'm connected via the VPN, all ports that are forwarded to the Snow Leopard server time out over the VPN.
I've tried various and sundry configurations with the VPN client. This includes trying to send all traffic over the VPN, moving it up in the service order, etc. etc. Nothing fixes it. DNS resolution is working fine, however when I do a wireshark capture of ppp0 traffic, I notice that SSL and TLSv1 handshakes appear to occur on the public IP address instead of the private network IP address... and they're all resets.
Has anyone gotten this to work successfully? Like I said, all ports that are NOT forwarded through the Airport work fine over the VPN, but will not work when connected to the VPN. It's really bizarre.

New data: any ports that are normally forwarded on the Airport Extreme to the Mac Mini server will not work when connected to the VPN.
For instance, if I have imaps/993 forwarded from the Airport Extreme to the Mac Mini, it works fine over the Internet. If I connect to the VPN, I can connect to all OTHER services on the Mac Mini, but Mail, for instance, will not work.

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

P13N Server and App Server on separate systems - strange ports opened

Hi -
          We have a configuration using WebLogic Personalization Server 3.1.1 on one
          server and WebLogic Application Server 5.1 w/Service Pack 6 on another
          server. What we've seen with our firewall configuration is that it appears
          there are high-number random ports opened occasionally from the App Server
          to the P13N Server, which d not appear to be related to connection attempts
          (ex: port 42100). The only communication that we know should be happening
          between the two systems are T3-based JNDI lookups, LDAP lookup/update
          requests, and SQL queries. My questions, then, are as follows:
          1) In handling JNDI requests, are there any callbacks that can occur between
          the two servers in this configuration on a different port?
          2) When separating the P13N Server and App Server, are there any "private"
          ports opened between the two systems for management? As far as I know, the
          App Server should simply view the P13N Server as another client, but the
          firewall log would indicate that something is going on related to this.
          If anyone has a similar config and can provide some info related to
          potentially unseen port connections, please let me know. Thanks in advance!
          Andy
          [email protected]


Haakon,
I think the BPEL forum is the better source to ask
BPEL
Frank

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Differences between CTI OS Server and CTI Server ?

Hello community,
I've been working with CTI Desktop for a while but I'm not clear about the differences between CTI OS Server and CTI Server?
If you go to http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x) and read note 10, they make diffrences between both products.
Thanks in advance,
Alejandro

CTI Server was the original CTI interface into ICM. It uses a network communication protocol, GED-188 I believe, for communication between the client and server. This is relatively difficult to program against. CTIOS and it's related SDKs were developed to provide an easier method of developing desktops and integrating desktop applications. CTI Server communicates with ICM, CTIOS Server communicates with CTI Server, and desktop applications using the various SDKs communicate with CTIOS Server. Cisco may be looking to get away from CTIOS Server in the future because of their decision to integrate Finesse with CTI Server rather than CTIOS Server. Hope that helps.

Integrating Messaging Server and Identity Server

I've got JES 2004Q2, and I'm trying to install the various components on different workstations to prove that a) the software works, and b) it's a viable alternative to Exchange (so please please help me get it working!)
The problem I have is getting Messenger Server and Directory Server talking properly so that I can create users and then log in as those users. After days of frustrating searching for solutions to this problem (and also find people who have successfully done this), I decided to install the components onto one server.
And it worked. Installing Messaging Server, Identity Server, Web Server (contained for Identity Server), Directory Server, and Admin Server all on the same box, configuring them all to use the same directory server for UG and preferences, running the various configuration tools that come with the software, and it all works together fine. Using "./commadmin domain modify .... -S mail", I get "OK". I can add users with the "-S mail" option, log in as those users, and send emails between those users. So this tells me that the software does work, albeit on one box.
When I try to separate the services out to separate boxes, they don't seem to integrate properly. I thought that maybe the order in which you configured applications made a difference (ie. configuring Identity Server after Messenger Server means IS will pick up on the changes made to the directory by MS, and enable it). I also tried to see if using the same options directory server from different boxes helped, but nothing. I've even tried patching them using 116568-52 and 116585-10 but no luck.
Therefore, I've found that installing all servers on one box works, but installing them on separate boxes doesn't (despite using the same directory servers). My conclusion in this is that one of two things must be the case:
a) there's something in the install that has to be changed to reflect the fact that the services are running on different boxes
b) the install of the services adds files to the system somewhere which other packages in JES pick up on (hence the reason why installing everything on one box works), and this isn't documented anywhere
Unfortunately, the output of commadmin when it fails isn't that helpful (nothing against the developers, however it doesn't really help in the fault finding process). I do believe however that the problem is with Identity Server and its configuration, rather than Messaging Server.
Here's some (possibly) useful info:
kipling# ./imsimta version
Sun Java(tm) System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004)
libimta.so 6.1 HotFix 0.01 (built 12:52:04, Jun 24 2004)
SunOS kipling 5.8 Generic_117350-02 sun4u sparc SUNW,Sun-Blade-1500
kipling#
(on UG server)
# ./commadmin domain modify -D admin -w <password> -d uwe.ac.uk -n uwe.ac.uk -S mail -H kipling.uwe.ac.uk
FAIL
Unable to set attribute(s)
(some verbose mode output)
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/TaskManager
[Debug]: To servlet: task=ModifyDomain&objecttype=Domain&domain=uwe.ac.uk&add_services=mail&add_preferredmailhost=kipling.uwe.ac.uk
[Debug]: RECV: FAIL
[Debug]: RECV: Unable to set attribute(s)
[Debug]: CLITask: status returned =FAIL
FAIL
Unable to set attribute(s)
[Debug]: DBG: doOne returned code=6
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/logout
[Debug]: Logout ...
[Debug]: RECV: SSOToken id AQIC5wM2LY4SfcyW5hbVBGXqCdsYYDjVarSFRMd6HIxsGho=@AAJTSQACMDE=#
[Debug]: RECV: destroyed
Root suffix: dc=uwe,dc=ac,dc=uk (all "o=" references have been dropped)
All services have their own local options directory server.
Can anyone give me any suggestions? If I log a support call with Sun, what is the likely resolution time? My ultimate goal is to get the whole suite running together, then install Portal server. Once that's working, download the connectors for Outlook and get it all working with Outlook. As I said at the start, we're hoping to show this is a viable alternative to Exchange (certainly for the backend) so any help will be greatly appreciated!
Iain

slo_chewie wrote:
Does the email recipient address change when the email is sent to gmail i.e. does an email sent to [email protected] become [email protected]?
We've got google for domains setup, so users would retain a @domain.com address regardless if there mailbox was hosted on the internal server or hosted at google.You can make use of the mailRoutingAddress: user attribute and source routing to get the desired behaviour e.g.
=> Set the following value to the LDAP entry of the user who is hosted on the gmail server. The "[email protected]" address should match the users mail: address:
mailRoutingAddress: @gmail.com:[email protected]=> Ensure the following option has been tcp_local channel in your imta.cnf file. This option strips off the "@gmail.com" value of the recipient address before sending the email to the gmail.com servers.
dequeue_removerouteMake sure you run "./imsimta cnbuild;./imsimta restart" after modifying the imta.cnf file.
Regards,
Shane.

Different service packs in admin server and managed server

Hi,
Has anybody successfully used a WebLogic 6.1 SP1 managed server that
connects to a WebLogic 6.1 SP 2 admin server?
BEA's docs claim:
"The Administration Server must be running the same version of
WebLogic Server as the Managed Servers in its domain. The
Administration Server must also have the same or later service pack
installed as the Managed Servers in its domain. For example, the
Administration Server could be running version 6.1, Service Pack 2
while the Managed Servers are running version 6.1, Service Pack 1."
This is precisely what we want to do, but it's not working. In this
case, we need to run the admin server and managed server on the same
machine, but we need the managed server to run SP 1 to work around a
bug in SP 2. So to our initial installation of WebLogic 6.1 SP 2,
where I run the admin server, I added a second installation, this time
WebLogic 6.1 SP 1, with a different BEA_HOME. When I start the
managed server from this second installation, I can see from the logs
that it is starting up correctly as 6.1 SP 1. But then it fails with
a ClassCastException when connecting to the admin server (I have
included the stack trace below). This seems typical of version
compatibility problems I've had when I've tried connecting to a server
with a client of a different version.
But in this case, you are supposed to be able to have the managed
server with a lower service pack. Does this work for anybody? Has
anybody encountered the problem I'm having? Note that the servers are
not clustered, if that makes any difference, and we have a custom
security realm in addition to the default file realm (though "system"
of course is in the default file realm).
Thanks in advance for any help,
Jim Doyle
[email protected]
####<Aug 8, 2002 10:25:38 AM EDT> <Emergency> <Server></server>
<chile.iso-ne.com> <webui
server> <main> <system> <> <000000> <Unable to initialize the server:
'Fatal ini
tialization exception
Throwable: java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace

Hi,
Has anybody successfully used a WebLogic 6.1 SP1 managed server that
connects to a WebLogic 6.1 SP 2 admin server?
BEA's docs claim:
"The Administration Server must be running the same version of
WebLogic Server as the Managed Servers in its domain. The
Administration Server must also have the same or later service pack
installed as the Managed Servers in its domain. For example, the
Administration Server could be running version 6.1, Service Pack 2
while the Managed Servers are running version 6.1, Service Pack 1."
This is precisely what we want to do, but it's not working. In this
case, we need to run the admin server and managed server on the same
machine, but we need the managed server to run SP 1 to work around a
bug in SP 2. So to our initial installation of WebLogic 6.1 SP 2,
where I run the admin server, I added a second installation, this time
WebLogic 6.1 SP 1, with a different BEA_HOME. When I start the
managed server from this second installation, I can see from the logs
that it is starting up correctly as 6.1 SP 1. But then it fails with
a ClassCastException when connecting to the admin server (I have
included the stack trace below). This seems typical of version
compatibility problems I've had when I've tried connecting to a server
with a client of a different version.
But in this case, you are supposed to be able to have the managed
server with a lower service pack. Does this work for anybody? Has
anybody encountered the problem I'm having? Note that the servers are
not clustered, if that makes any difference, and we have a custom
security realm in addition to the default file realm (though "system"
of course is in the default file realm).
Thanks in advance for any help,
Jim Doyle
[email protected]
####<Aug 8, 2002 10:25:38 AM EDT> <Emergency> <Server></server>
<chile.iso-ne.com> <webui
server> <main> <system> <> <000000> <Unable to initialize the server:
'Fatal ini
tialization exception
Throwable: java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace

Enqueue server and Message server in ABAP/Java dual stack

Hi you guys,
I have some questions when studying SAP, could you please explain for me:
- In ABAP and Java system, do each stack have it own enqueue server and message server?
- What is the difference between Enqueue server and enqueue work process in ABAP stack?
- If there is one message server for each stack, which messager server (ABAP or Java) will the Web dispatcher connect directly to?
- How do ABAP message server and Java message server communicate with each other?
Thank you very much.

1. in Dual Stack, normally you have ABAP Stack and SCS Central service Instance. ABAP Instance has Message server, SCS has it own Message server and enqueue server. ABAP instance doesn't have enqueue server, because the SCS already has enqueue service
2. Communication between ABAP and J2EE Engine uses RFC (JCo) or HTTP Interface.
Web Dispatcher will connect to the ICM of that instance, and the ICM is talking to Abap dispatcher and J2EE Dispatcher.
3. The term: enqueue server and enqueue work process , already shows its different quite obviously.
What so confuse about it ? do some search on SAP Online Documentation.
Regards,
Vincent

Checklist for apache server and form server

Similar Messages

Maybe you are looking for