Checklist for BI on new ECC box

Hello Experts, Can you please provide me the BI checklist for the new ECC box. We just built a new box and we want to confirm that all the BI componets and contents are installed.
Thx.

jackalcarlos76 wrote:
That's all well and good, though I've never agreed or been asked to agree to be part of a trial, nor am I paying trial prices for my subscription.
You are not part of any trial. You have the latest working software on your box. That is now standard issue to new customers.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

Checklist for setting up BI QA box

Hi Gurus,
Can you please provide me the checklist for the BI QA/Prod box.
We are in the process of building our QA and Prod. box.
Thanks,
SAPIAN

Hi,
As for the case
There is a Preupgrade phase wherein u need to follow the points listed below.
1.Activate all requests in the ODS and Data targets.
2. All Transfer and Update Rules should be activated
3.     All Info Cubes should be activated
4.     Master data consistency [Execute report RSDMD_CHECKPRG_ALL]
5.     Transport requests [Release transport requests and repairs. No request should be in Modifiable version.]
6.     Deactivate all Process chains
7.     Remove unnecessary BW temporary database objects
8.     Delta Queue should be Empty
9.     Validate the missing indices in DB02
10.     Check Info-Objects Status.[RSRV: extensive check]
11.     Check the status of all support packages (via transaction SPAM)
12. Determine strategy for downtime minimized or resource minimized
13.Using the SAP BW Analysis Tool (transaction RSRV), perform extensive tests on all important SAP BW Objects; ensure their correctness prior to the upgrade.
14. Report ANALYZE_RSZ_TABLE to find double entries in SE38
We have the PREPARE PHASE next.
Followed by post upgrade activities.
Hope it helps.
Regards
Govind.

BI switching to new ECC 6.0 box from R/3 4.7 box, question on delta init?

Hi all,
Our BI has been already upgraded to 7.0. Currently connected to R/3 4.7.
Now a new box is made with ECC 6.0 and Oracle 8 which is a mirror copy of the r/3 4.7.Once the new box is ready the BI 7.0 connection will be switched from R/3 4.7 to the new box ECC 6.0.
My question is ...
In the R/3 4.7 the datasources were already initialized for delta..so the pointer for delta was already setup.
Now when we connect the new ECC box do I have to initialize delta again ? or would the new system recognize the pointer since it is a mirror copy from the old system?
pls advice

It´s a bit confusing what you write - I try to get your point:
- your 4.7 is running on Oracle 8 (VERY old, unsupported)
- you install a NEW system on ERP 6.0? Or do you upgrade your 4.7 copy?
Markus

BI switching to new ECC 6.0 box from R/3 4.7, question on delta init?

Hi all,
Our BI has been already upgraded to 7.0. Currently connected to R/3 4.7.
Now a new box is made with ECC 6.0 and Oracle 8 which is a mirror copy of the r/3 4.7.Once the new box is ready the BI 7.0 connection will be switched from R/3 4.7 to the new box ECC 6.0.
My question is ...
In the R/3 4.7 the datasources were already initialized for delta..so the pointer for delta was already setup.
Now when we connect the new ECC box do I have to initialize delta again ? or would the new system recognize the pointer since it is a mirror copy from the old system?
pls advice

Hi,
you would have added the new ECC source system to the BI.
I that case I think you need to initialize the Data again.
As all other requirements for delta like the pointer in delta queue might not be set for the new datasources.
I havent tried such thing till. but as per the concepts I understand You need to initialize the data
Regards
Praeon

ECC6.0 upgrade and BW steps for mapping the new ECC6.0 source system

Hello gurus
We are upgrading from R3 4.6C to ECC6.0. We use BW 7.0 SP 18. We will create the new ECC6.0 source system in BW, replicate metadata and everything. The question is how do we copy or reassign the existing objects pointing to our current 4.6c dev system (transfer rules, transformations, infopackages, process chains) to point to the new ECC6.0 dev system ? As a note, we also need to keep the current 4.6c source system objects until go-live o ECC6.0.
What is the common practice in such a case ? I am sure we are not unique...
A prompt response would be appreciated.
Thank you all.

So the plan is to copy dev R3 and upgrade that - then Q r3 copied and upgrade that - then upgrade directly prod R3?
If so - then if it were me - I would firstly prove all this in a sandbox environment where BW dev points at an upgraded sandbox R3 ecc
ie same logical system
Then once that is proved I would organise downtime of BW development for a few months whilst the d-q-p ecc happens
Then when they copy dev r43 to ecc r3 i would then just point BW dev at the new ecc box and go from there (ie clear the deltas - change the logical system name to the new ecc box - replicate meta data - transtru all the datasources - run the process chains nothign to worry about)
However if you cant afford the down time - you may have to have an alternative transport route - ie copy dev BW to a another dev bw box and have an alternative path to production for issues
Then once everything is upgraded redo the changes through d-q-p to get the transports back in line (thats what we did)

Steps/RisksConnecting BW with New ECC 6 while keeping old ECC5 box active

Hi Friends-
Right now we have current dataflow from ECC 5 to BW 7.0 for differnet countries .Now i have a situation where i have new ecc 6.0 box. and I need to move only one country functionality to new Ecc6 box and load data from new box to current BW box. So what are the pain ponts/Risks in doing this. My concern is all about master data, Can anyone suggest the best methodology to do this without effecting current dataflow or overwriting objects.
Regards,
Mark

Hello Mark,
Does your master data overlap and you can't easily make it unique from the individual source systems? If not you could compound with 0SOURCSYSTEM as described in the SAP note 184948.
Best Regards,
Des

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Having been without my Mac for a month I've been using iCloud mail. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail?

Having been without my Mac for a month I've been using iCloud mail.on a PC. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail? Thanks.

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system but I can't get it to activate. I'm trying to us

I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system (Win XP) but I can't get it to activate. I'm trying to use phone activation because the machine I will be using is not net-connected. How can I activate this s/w?

You won't be able to. You will need to acquire a special copy. See the following:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working

New Otter Box for iPhone G4S, talking on phone with speaker on, I have to yell for anyone to hear me, like the internal mike is not working or some setting is changed? How do I fix this?

edith28 wrote:
New Otter Box for iPhone G4S,
No such model exists.

QM02 - notifications - update document flow for new action box item

I have added a new action box item on qm02 (notifications). I am created a PO and a delivery. I wish to update the document flow to include these new records.
I am trying to work with function qmlr_create_document_flow without success.
Does anyone know how to do this?
Thanks,
rv

Hi Rags,
Thanks for your reply.
About your reply:
1) Yes, I was also thinking that 2 preceding docs may not be possible in a doc flow, and had also indicated the same to my customer. However, wanted to be 100% sure that it cannot be done.
2) I cannot go ahead with a Service/Release Order. The requirement is to create a Return Order or a Credit Memo Request (CR) directly from the Service Notification and any other order is not in scope.
I was thinking of something as below:
The Service Notification header is linked to Return Order header only, there are no links at the item level. Is it a feasible solution to have a doc flow between invoice items & return order items, since return order items are not yet linked?....I am just thinking of different things to find a solution!
Thanks again.
Cheers
Vicky

How can I buy a new shipping box for my iMac?

I need a new shipping box for my iMac. Can they be purchased?

You mean the shipping box Apple shipped the iMac with when new?
If so, no.

New action box for Q note

Hi ,
I am trying to create a new action box in Q note.
QI to Blocked, 350 movement type, MB1B.
IMG path QM>Quality notification>Notification processing>Additional Notification Functions>Define Action box.
while creating the new action box it needs many different thing.
So can some one help me what I need to define as function key, sort number , Function Module Name, Business Transaction
Code Group for Task or Activity, Function Module when Saving.
So please help me out and if some one know the place where I can get configuration documents which can throw some light of this topic.
Thanks in advance.
Best Regards

Hi Gajesh,
Thanks for reply, QM is not active for the materials for which we are planning to use this action.
I am new to QM and thats why facing problem while configuring the new action Box.
i created new action , using new function keys and sort number.
but i am unable to find a suitable function module for the new action, i want to use movement type 350 in the same way how we use it in MB1B.
one more information i need is shoiuld i go ahead with activity or i need to use task for these movement?
reply , if need some more information.
Regards

Building a new Win64 box for LR4.1

I am in the process of bullding a new Win64 box for Lr4.1 and working with Nikon D800/E 14bit NEFS.
I am thinking about running an Intel Ivy Bridge Core i7-3770K with 32GB ram, Windows 7 64, A couple of sata III 128 GB drives for OS Programs and the second SSD for LR4 cagesatalog and a 4TB Hitachi drive for images.
I was wondering if it would be worthwhile to spetnd the extra $$ and get the Intel Core i7-3930K Sandy Bridge 6 core processor, yes it is older then the Ivy Brige but it has 6 cores vs 4 and 12mb L3 cache as opposed to 8mb. plus LGA2011 motherboards support 64GB of ram...
Will LR4.1 take advantage of 6 cores over the Quad Core or will it not be much faster?
Thanks
Steven

Thanks for the link.
I have been reading it carefully though of course they recommend the 3930k chip though this only pertains to premiere still not sure if the 2 extra cores and being able to run 64gb of ram will improve LR4 performance.
The ivy bridge setup with 3770k CPU , mb and 32GB ram is about 600-700$ whereas the 3930k setup with 64 gb ram is over 1300.00$
Almost twice as much, and no idea wether its much faster in regards to develope module and importing and creating 1:1 previews from d800 net files
Hmmm.

ADR3 table updation in new ECC system for customer address

When ever customer is created using VAP1 transaction and maintain telephone and fax number it used to get update in ADR3 table.
in new ECC system unless and until the telephone and fax is maintained in Business area of Contact person it is not getting updated in ADR3 table.
Can u please let me know in which table it is getting saved if we are not maintaining these in business area in ECC?

Sreedevi only fax number along with extension is getting updated in ADR3 but telephone number & extrnsion is getting updated in ADR2.
Reward Points if it helps,
Regards,
N

Checklist for BI on new ECC box

Similar Messages

Maybe you are looking for