Checklist for installation of Financial reporting and web analysis

Hello All,
Can anyone give me a checklist for installation of Financial reporting and web analysis. The checlist should contain the points/information that the installed FR and WA is proper or not. Please let me know if this this is the correct forum for reporting doubts, if not then plz guide me to the correct oracle forum.
Thanks a lot
Ashu

For which version?
Here is the link for 11.1.1.3 EPM Deployment:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_1.htm
And specifically for Reporting and WA:
http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/ra_1111300_readme.html
Hope this helps.
A

Similar Messages

Financial reportin,Interactive reporting and web analysis

Hi,
Could anyone help me in what kind of reports exactly generates by the above 3 tools.How we will generate reports using financial reporting.i mean to say what process we will follow .
In a financial domain project , what we will do exactly with the above three tools.
I am quite interested to know as much info as i can on these 3 tools.
replies will be highly appreciated.

This is quite a big subject and you need to do more investigation, but as a starter for ten (these are high level views only)
Financial Reporting - is used to create high quality, high format reports - ideal for finance based use
Web Analysis - is used as a more interactive visual tool, with emphasis on exceptions/graphs and drilling etc
Interactive reporting - is one of the old Brio tools and is more of a BI reporting tool
There is a Query and Reporting forum at Hyperion Query and Reporting that might be useful to post on.
Hope this helps.
Andy King
http://www.analitica.co.uk

Unable to open reports and web analysis document in workspace

After installing reports and analysis 9.3.1, when I am trying to preview a test report on web or as a pdf preview I am getting these kind of errors.
<BR><BR>
Required application module analyzer.reportview is not configured. Please contact your administrator.
<BR><BR>
When I click OK on this it says communication error which says <BR><BR>
"http://hyprepdev.acml.com:19000/WebAnalysis/conf/AnalyzerConfig.xml?LOCALE_LANGUAGE=en <H1>SRVE0255E: A WebGroup/Virtual Host to handle /WebAnalysis/conf/AnalyzerConfig.xml has not been defined.</H1><BR><H3>SRVE0255E: A WebGroup/Virtual Host to handle hyprepdev.acml.com:19000 has not been defined.</H3><BR><I>IBM WebSphere Application Server</I>"
<BR><BR><BR><BR>
Similarly when I try to open as pdf preview I am getting the same error.<BR>
Kindly advice.

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

Document integration for Bex reports and web reports

Hi,
I would like to attach few documentaion (like business usage of the report) for all existing reports in BW system. We are delivering all reports through Bex reports and Web reports.
Report user should be able to see attached documentation through "Document" property in Web report.
I have followed this way but not able to get on-line documentation for queries.
1. RSA1--> Documents >Meta Data> selected Object type ELEM> Import document> attached word document.
2. I enabled Documents property in Query designer.
3. When I executed this query in Bex, I could see document symbol for all characteristics & Key figures in all cell (in default view)
4. The same result with Web report (all cells are having document symbol).
But I dont want to display documents in defaul view, if any user wanted to have doucment info, then should click on "document" tab and should be able to down load / read on line.
Let me know why I am getting document symbol for all key / char, even though i selected "ELEM". I know we could direclty import documents in query designer, what is the difference..
Rgds..

Hi,
Anybody could provide step to step procedure for doucument integration for Bex reports.
Best regards,

Weblogic preventing financial reporting and RAF from being accessed

Hi all,
11.1.2.1 (linux)
Web logic has financial reporting and RAF in ADMIN mode which is preventing them beign accessed. All other components are fine. The web server config step succeeded and both products were listed as being configured. I logged into the weblogic admin console and saw all products had a status if RUNNING except for FR and RAF. I tried shutting them down by force and starting them but it restarts, after a minute or so, in ADMIN mode. I have checked the startup mode and it is set to RUNNING.
I have checked the weblogic logs and I can't see any indication of the cause.
Has anyone experienced this?
Thanks,
Nathan

Refer :
http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch15s05s02.html
for more details about command line scheduling

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

Where to find tutorials for generating standard financial reports in SAP

Hi,
I am an accounting major student who do not have any background in IT programming and SAP as well. I am taking a class about SAP and I have to do a project with the topic "Managerial reporting in SAP". Basically, I will have to do a step-by-step tutorials for the whole class about how to generate standard reports and customized reports from SAP, mainly financial statement reports and the analysis of those statements.
I have been searching a lot from sdn.sap.com but not found anything. Please help me to find the tutorials.
Thanks a lot
Edited by: Linh Trinh on Oct 29, 2008 5:53 PM

Sorry for bumping an old thread, but I'm looking for the above requested library too.
Anyone know where the jar is located? Thanks.

FR and Web Analysis reports will not run in workspace

I have configured both FR and Web Analysis and then re-configured workspace to pick them up. 'Reporting and Analysis shows up in my foundation metadata under workspace. All my related ports are enabled.
Database connection manager, import financial reporting reports, preferences financial reporting, tools/link to web analysis, do not appear in workspace.
get 'required application context analyzer is missing. please contact your adminstrator.' error when try to run a web analysis or financial reporting report from workspace.
Web analysis as a client with reports is working fine.
Financial reporting allows me to create a database connection, create a report, pdf preview from the client but web preview breaks with generic page not found error.
Any suggestions would be most appreciated.

Hi,
You can use panel while creating reports and put all the graphs on it .
Panels color can be changed.
Thanks
Yashwant

Books not updating for changes to financial reports

I have made some changes to financial reports which are contained in existing books. I have run the reports individually and the changes are correctly reflected. However, if I open the book containing the report it still shows the report as it existed before the changes. I have even deleted and re-added the relevant report into the book and it still makes no difference.
Regards
Katie

Until and otherwise if anyone else has a suggestion,I would say apply the latest FR patch
Patch 13024655: Patch Set Update: 11.1.1.3.519 for Oracle Hyperion Reporting and Analysis Financial Reporting
And if still the issue persist,then open a Ticket with Oracle support for further troubleshooting.

Install Financial Reporting and Analysis

Hi All,
I have a Classic Planning Application on EPM 11.1.1.1.0
I have hyperion installed in a distributed env..(on three boxes..one running windows xp(machine 1), two running windows server 2003(machine 2 and machine 3.)
Machine 2 has ...Essbase Server and Oracle.
Machine 3 has ...Hyperion Planning,Workspace.
Machine 1 has ...EPMA and Calc Mgr.
Now i need to install Financial Reporting and analysis..
Can somebody please guide me as to which box should i go about installing it..?
Regards.
Alicia
Edited by: Alicia on Aug 27, 2009 11:34 PM

Hello John...
let em describe my config
I have a UNIX box and a windows server 2003 box. Now EPMA and calc manager must be installed on Windows
so that part is fixed ...
And on the Unix machine i am going to install sharedservice, essbase,eas,planning
now if i want to install reporting ,then on which machine i should do it?
Unix Box
Shared Services
Essbase Server
EAS
HP
PS
Workspace
Windows Server Box
EPMA
Calc Man
Int Rep
Finan Rep
SQR Rep
Web Analysis
FDM
Windows Box
EPMA and CALC
mgr
I am using EPM sytem 11.
Thanks

Financial Reports and Attribute Dims

Hi,
Is it possible to include Attributes in a Financial Report and subtotal by the particular Attribute by employee? For Example:
Column Definition has Account = Insurance Cost with a scenario version etc.....
Jan Feb Mar Qtr1
Smith, John Cigna PPO 10 10 10 30
Jones, Justin Cigna PPO 12 12 12 36
SubTotal - Cigna PPO 22 22 22 66
Long, Brad Kaiser 30 30 30 90
Harvey, Bill Kaiser 24 24 24 24
SubTotal - Kaiser 54 54 54 54
Grand Total 76 76 76 120
Where Column 2 'Type' is an attribute assigned to the Employee in Column 1. Also what if column 2 was a 'SmartList' in Accounts dimension instead? Right now outline is a Smart List however getting it to Subtotal is impossible I think as the SmartList is an Account named 'Plan Type' thus it has t be in columns as the report has Account = Insurance Cost in the column definition too.....

Hi
In answer to your first question yes it is possibe to report a dimension by its associated attribute. You will need to drag the attribute dimension and the employee dimension onto the rows for the grid. You may want to play around with whether the attribute dimension comes before or after the employee dimension to see whether there is a noticeable performance difference.
If I am reading your post correctly you currently want to have:
Column1 - Employee
Column2 - Attribute / SmartList
Column3 - Account (Insurance) > Jan
Column4 - Account (Insurance) > Feb
Column5 - Account (Insurance) > Mar
Column6 - Account (Insurance) > Q1
This will work fine for an attribute but if you want Column 2 to be a smartlist then you would have to put your account dimension into columns and that would mean that your smartlist would have to appear in only 1 period, i.e. if it changes from Jan to Feb then you would need more than one column to report it. It will also be harder to get a subtotal using a smartlist, with an attribute the subtotal will naturally be available by selecting the top member of the Employee dimension with your attribute (it will dynamically sum all members with the attribute you are calling).
Hope this helps
Stuart

Migrating HFR and Web Analysis Reports and Documents

Dear All,
Is there any way I can migrate HFR and Web Analysis Reports and Documents from test environments to production instead of re-creating reports?
Thanks,
ioGGo.

For HFR reports,
- If you want to do a bulk export, then choose File->Export & select multiple reports & save to a .zip file when prompted. In this case, reports' folder hierarchy is maintained the same as in source.
- If you want to do a selective export, select the folder(where your report is present) from the (left)navigation pane. Then choose File->Export, select the report & save to a .des file when prompted.
For WAS reports,
you may export each report definition from File -> Export. I believe- it'd let you save as .apt file.
However, for both type of reports, you need to ensure the respective database connection file(s) are already present before you import the reports/documents in your prod. environment.
- Natesh

Checklist for the flow of FI and MM

Hi All,
Can anyone please guide me in preparing checklist for the flow of MM and FI from creation of purchase order to clearing the advance payment.

hope tis is of some help
MM     Purchase Order (ME21N)                        No FI Entry
MM     RM Purchase GRN / Challan        (MIGO)     RM Stock
          GR / IR Clearing
          RM Stock
          GR / IR Clearing
     If any service PO, instead of MIGO
     we want to use ML81n
CIN     Ex invoice-Incomming (J1IEX)     CENVAT BED Input
          CENVAT E-Cess Input
          CENVAT Clearing
          CENVAT Clearing
MM     Purchase Invoice (MIRO)
GR / IR Clearing
          CENVAT Clearing
          CENVAT Clearing
          RM AP VAT Deductible
          VENDOR
MM     Capital Goods (MIRO)     Cenvat Input 50%
          Cenvat on Hold 50%
          Cenvat Clearing 100%
MM     Capital Credit Transferred to Next year (J2I8)
               Cenvat Input 50%
          Cenvat on Hold 50%
MM     Capital Goods with AED
                  Cenvat AED 100%
          Cenvat Clearing 100%
MM     Import Procurement (MIRO)
Customs Clearing 7.5%
          CVD Clearing 1421
          Customs Payable
MM     GRN / Challan (MIGO)
Raw Mater Stock
          GRIR
          Customs Clearing
CIN     Excise Invoice (J1IEX)
Cenvat Input
          CVD Clearing
MM     Invoice Verification (MIRO)
                GRIR
          VAT
          Vendor
MM     Sub Contractor PO (ME21N)     NO FI Entry
MM     Material Issue to Sub Contractor (MB1B)     NO FI Entry
     Mov type 541
MM     Sub Challan Creation (J1IF01)     NO FI Entry
MM     Sub Challan Print   (J1IF11)     NO FI Entry
MM     Sub Cont Goods Receipt (MIGO)
                  SFG
     Movt type 542     Cons Raw Material
          GRIR
          Cons Raw Material
          Raw Material Stock
MM     Sub Cont Reconciliation (J1IFQ)     NO FI Entry
MM     Sub Cont - Complete/Reversal/Recredit (J1IF13)     NO FI Entry
MM     List of Sub Contr Challan (J1IFR)     NO FI Entry

Setting up default value for POV in Financial Reporting Studio

hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
Neha

Hi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks!

Workspace and Web Analysis - null folder automatically created

Hi.
We have recently installed BI+ service pack 9.3.1.3. Since that, we have been experiencing problems on Workspace and Web Analysis: in particular, a null folder is automatically created as users login to Web Analysis Studio.
Moreover, it is not possible to assign Web Analysis' shared preferences, because of that null folder. In fact, users' preferences always shows path to null folder: for example, Document Folder path points to /Users/null/Reports for every user logged in to Web Analysis Studio. By this way, it is not possible to save changes.
Looking at BIPLUS repository, I noticed that in HYA_DB_PREFS table, there is a record containing NULL value for field USERNAME. I was wondering whether this record normally exist in the table or it could be related to the problem that we are experiencing. Does anyone have similar record in his installed BI+ environment?
Thanks a lot in advance for help

Hi Andrea
Since the installation from service pack 9.3.1.3 we've new problems on Workspace and Web Analysis too.
Null folder ist automaticall created as users login to Web Analysis Studio
And it is not possible to save changes in Workspace Preferences, except I'm login as Administrator
Have you found a solution?
Thanks a lot.
Edited by: DIDM on Oct 7, 2009 3:15 PM

Checklist for installation of Financial reporting and web analysis

Similar Messages

Maybe you are looking for