Checks after phase PREP_IMPORT/TOOLIMPD
Hi All
We are installing EHP4 SP6 in our ECC 6.0 system. Weu2019ve created a .xml file in our solution manager and calculated a download queue with the MOPZ. The installation is on a Windows 2003 32 Bit platform with a SQL server 2005 SP2 DB.
In roadmap step 2 (Extraction) the installation stops with the message: u201CChecks after phase PREP_IMPORT/TOOLIMPD were negative! Last error code set: Unresolved requests in buffer <SID> Check logfiles 'TOOLIMPD.ELG' and 'H:\EHPI\abap\log\SAPehpi.ECO'
During executing this job RDDMASGL a shortdump is generated:
What happened?
Error in the ABAP Application Program
The current ABAP program "RADMASG0_C3" had to be terminated because it
Has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSDMP " in include
"RADMASUTC " in line 4146: "The data object "DELTAB" does not have a component called "MAINOBJEX"."Note 1449201 - Index becomes extension index: Index is deleted
discripes the error/solution.
I think the error arise after implementing note: 1449201, but Iu2019m not sure.
In the note:
"Make sure that you note the manual prerequisites. If these are required in your system, you may not under any circumstances implement this note without adjusting the structure DDGENTAB. Otherwise, syntax errors would occur in the report RADMASUTC and then Dictionary activation would no longer be possible.
If errors occur when you implement the correction instructions or when you perform the manual pre-implementation steps, open a message under the component BC-DWB-DIC and refer to this note. Allow SAP Support to have access to your system."
For about the solution we have to contact SAP. Iu2019ve created a SAP message and Iu2019m still waiting for a solution. Did anyone had this problem before and what was the solution?
Thanks in advance for your reply.
Kind Regards,
Rik Hut
Hi Rik,
I've just had a near-identical problem whilst trying to install support packs onto our BI 7.00 Test system. I found that my problem was because someone had performed a TP IMPORT ALL into the BI Test system, which imported all the modification adjustment transports from the SP import in the BI Development system too early.
I fixed the problem by logging onto the BI Development system and looking at the version management for the object that was generating the syntax errors. I found a reference to the original transport for the object and re-imported it into the BI Test system to overwrite the latest version, which shouldn't have been in the Test system in the first place!
I don't know whether SAP would recommend this approach because I don't know what side-effects 'downgrading' the objects in that request could have. However, I do know that it has fixed the Support Package problem, and I can now run SPAM quite happily once again.
I hope this helps,
Arwel Owen
Enterprise Systems Manager,
Princes Ltd.
Similar Messages
-
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Dear Guys,
We are facing issue during the upgrade from 4.6c to ECC 6.0 EHP4 in pre-processing phase,
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Detected 257 errors summarizes in 'ACTUPG.ELG' Check logfiles 'ACTUPG.ELG' and 'I:\usr\sap\DV1\upg\abap\log\SAPup.ECO'
ACTUPG.ELG:
******* LIST OF ERRORS AND RETURN CODES ******* ************************************************** ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INECCDIMP.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INFICA.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INFICAX.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INFINBASIS.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016ININSURANC.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INISM.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INISOIL.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INISPSCA.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INISUT.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60017INECCDIMP.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 ETP111 exit code : "8" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60017INERECRUIT.DV1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......... Please help us to resolve the problem.
Regards,
BharathiHi Bharathi,
Can you please provide the contents of the activation log SAPA-60016INECCDIMP.DV1 which provides the information about the error.
Please check the activation log SAPAAA*.DV1 to know which tables are not activated.
Thank You.
Regards,
Deepika -
hi
I'm installing the EHP4 on an ERP 6.0 System and get the following error:
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer EH4 Check logfiles 'ACTUPG.ELG' and 'C:\usr\sap\EH4\upg\abap\log\SAPehpi.ECO'
Here is a part of SAPEhpi.EH4:
SAPehpi> Starting subprocess tp.exe with id 5208 at 20090727150713
EXECUTING C:\usr\sap\EH4\upg\abap\exe\tp.exe pf=C:\usr\sap\EH4\upg\abap\bin\ACTUPG.TPP put EH4
Environment: JAVA_HOME=C:\j2sdk1.4.2_16-x64
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Environment: Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\j2sdk1.4.2_16-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\usr\sap\EH4\DVEBMGS00\exe
Environment: dbs_mss_schema=eh4
This is C:\usr\sap\EH4\upg\abap\exe\tp.exe version 372.04.65 (release 701, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
stopping on error 12 during DD ACTIVATION
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
ERROR: stopping on error 12 during DD ACTIVATION
Process with ID 17820 terminated with status 12
Part of ACTUPG.EH4:
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-40401INEAIPPE.EH4
1 ETP111 exit code : "12"
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DDINEAAPPL.EH4
1 ETP111 exit code : "12"
I applied the note 1306559 but it didn't help.
someone has an idea?
thank younow i got some data from the shadow instance
JOB:
RDDMASGL DDIC Canceled
JOB LOG:
Job started
Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)
Start of mass activation 10:37:39
ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Job cancelled
Runtime Error Short Text
No roll storage space of length 638992 available for internal storage.
Error Analysis
Error analysis
The internal table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB" could not be enlarged
further.
Memory location: "Session memory"
You attempted to extend the data structure for the management of the
memory blocks for table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB". However, the
638992 bytes required for
this were no longer available in the specified memory area.
The amount of memory requested is no longer available.
should i also apply the note 1306559 in the shadow instance?
thx
Edited by: Joachim Knittl on Jul 29, 2009 3:30 PM -
Checks after phase MAIN_SHDRUN/RUN_RADTBUCACT were negative!
Hi Experts,
I have installed ECC 6.0 system ( OS400/V7R1)and curently i am upgrading to EhP4 SP06. Right now Preprocessing- Shadow System Installation stage and got the error.
Checks after phase MAIN_SHDRUN/RUN_RADTBUCACT were negative!
Last error code set: BATCH JOB RADTBUCACT FAILED: Error(s) found in the
log(s), accumulated in "PADTBUC.ELG".
PADTBUC.ELG log
Pool adaptions for UNICODE ERRORS and RETURN CODE in RADTBUCACT.NID
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EDDA479 Fehler bei Alter - Table Generierung für Tabelle "GLSP"
Long text:
Cause
This error message indicates that internal inconsistencies exist.
System Response
What to do
Please consult SAP.
1EDDT066 Tabelle "GLSP" (Statements konnten nicht generiert werden)
Long text:
Cause
A requested database action could not be carried out.
System Response
What to do
First try to repeat the action which caused this message. If the
database action again cannot be carried out, find out the cause of the
error using the analysis tool in the database utility. There might be
an inconsistency between the table definition in the ABAP Dictionary
and the existing nametab (runtime object for the table).
1EDD0319 Returncode...............: "8"
A2EEDDU 309XActivation ends with return code: "8""123341"
A trouble ticket and an archive with all relevant log files have been
generated. Trouble ticket: "/usr/sap/NID/EHPI/abap/log/SAPehpi_troubleticket.log"
I found OSS note 1449201 - Index becomes extension index: Index is deleted...And followed the manual steps. Once update the trans file and ran the report i was able to see the changes, Still i am not able to continue with the process.
Thanks.
Vel.Hi All,
SAP development proposed below details...
While checking your system we saw that table GLSP did not have any column defined at the database level.
Since it is a freshly installed system, I recreated the table in the database via transaction SE14.
I check the other tables process in the current phase and the other tables are consistent.
Please continue with this phase.
I am able to continue with the next phase.
Thanks.
Vel. -
Checks after phase MAIN_NEWBAS/XPRAS_UPG were negative
Hi Gurus,
am upgrading from ecc 6.0 to ehp5 on dual stack system OS:Windows 2003 DB:oracle 10.2.0.2
i got below error in the MAIN_NEWBAS/XPRAS_UPG phase
XPRASUPG.ELG log:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-500AGINCPRXRPM.IJE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "14152200")
Long text:
Cause
Program "&V#&", which was started in the background, was terminated
abnormally.
System Response
The system created a job log for the terminated program.
What to do
Proceed as follows:
Log onto the system in which the program was executed. The system is
specified at the beginning of the transport log.
Then call transaction SM37 to display the job log.
Enter "&V#&" as job name and "DDIC" as user name.
Restrict the starting date to the starting date specified in the
transport log.
For the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>.
A list of the jobs satisfying the selection criteria is displayed.
You can display the log by pressing <LS>Job log</>.
If the list contains several jobs, you can select the job with the ID "
&V#&" with <LS>Display</> -> <LS>Job details</> or define further
details for the selection criteria in the initial screen of transaction
SM37.
If the ABAP processor reports cancellation, double-clicking on the
corresponding message in the job log branches to the display of the
corresponding short dump.
1AEPU320 See job log"RDDEXECL""14152200""IJE"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
RDDEXECL job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server admin0001 were synchronized
Internal session terminated with a runtime error (see ST22)
Job cancelled
Dump at ST22:
Error analysis
The following syntax error was found in the program
CL_DPR_TASK_O=================CP :
"Formal parameter "IV_PLANSTART" does not exist."
please help me solve
Thanks,
VenkatHi Sunny,
here is dump details..
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_DPR_TASK_O=================CP
Application Component PPM-PRO-STR
Date and Time 06.12.2011 16:34:41
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transaction ID...... "04FA1FE12F6DF16DB7E400145E69764F"
EPP Whole Context ID.... 34454438393637453445443839363745
EPP Connection ID....... 34454442374143323445444237414332
EPP Caller Counter...... 1
Program............. "CL_DPR_STATUS_CHANGE_OBSERVER=CP"
Screen.............. "SAPMSSY0 1000"
Screen Line......... 6
Debugger Active..... "none"
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DPR_STATUS_CHANGE_OBSERVER=CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_DPR_TASK_O=================CP " in include
"CL_DPR_TASK_O=================CM021 " in
line 74:
"Formal parameter "IV_PLANSTART" does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_DPR_STATUS_CHANGE_OBSERVER=CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program
CL_DPR_TASK_O=================CP :
"Formal parameter "IV_PLANSTART" does not exist."
Information on where terminated
Termination occurred in the ABAP program "CL_DPR_STATUS_CHANGE_OBSERVER=CP" -
in "SET_HANDLER".
The main program was "R_DPR_PROJECT_ROLES_XPRA ".
In the source code you have the termination point in line 12
of the (Include) program "CL_DPR_STATUS_CHANGE_OBSERVER=CM00A".
The program "CL_DPR_STATUS_CHANGE_OBSERVER=CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Thanks in advance
Venkat -
Upgrade issue in phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative
Hello Team,
Got hanged at the phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative,.
Error:
Checks after phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative!
Last error code set: Detected 1 aborted activities in 'PHASES.ELG'<br/> Calling 'D:\usr\sap\XXX\DVEBMGS00\exe/tp' failed with return code 13, check D:\Software\SUM\abap\log\SAPup.ECO for details
Log file says:
EXECUTING D:\usr\sap\XXX\DVEBMGS00\exe\tp.EXE "pf=D:\Software\SUM\abap\var\DEFAULT.TPP" import all XXX
This is D:\usr\sap\XXX\DVEBMGS00\exe\tp.EXE version 380.03.95 (release 738, unicode enabled)
Could not open the ICU common library.
The following files must be in the path described by
the environment variable "PATH":
icuuc50.dll, icudt50.dll, icuin50.dll [D:/depot/bas/741_REL/src/flat/nlsui0.c 1535] pid = 12148
PATH is currently set to D:\usr\sap\XXX\DVEBMGS00\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\j2sdk1.4.2_24-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\XXX\SYS\exe\uc\NTAMD64 [D:/depot/bas/741_REL/src/flat/nlsui0.c 1538] pid = 12148
stopping on error 13 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 13
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 13
meaning:A tool used by tp got a signal from operating system
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: stopping on error 13 during MAIN IMPORT
SAPup> Process with PID 12212 terminated with status 13 at 20140515155156!
### Phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE:
Please help me out,..
Thank you,
Mohan Karamala.I have cancelled the upgrade and tried again,..but got hanged with the same problem,..
Please help me,. or can i raise a ticket with SAP.???
Log details:
### Phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE:
SAPup> Starting subprocess in phase 'TOOLIMP_TOOLDEL_PRE' at 20140519045354
ENV: DBMS_TYPE=mss
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\usr\sap\PS1\DVEBMGS00\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\j2sdk1.4.2_24-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\PS1\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=PS1
ENV: dbs_mss_schema=ps1
ENV: rsdb_ssfs_connect=0
EXECUTING D:\usr\sap\PS1\DVEBMGS00\exe\tp.EXE "pf=D:\Software\SUM\abap\var\DEFAULT.TPP" import all PS1
This is D:\usr\sap\PS1\DVEBMGS00\exe\tp.EXE version 380.03.95 (release 738, unicode enabled)
Could not open the ICU common library.
The following files must be in the path described by
the environment variable "PATH":
icuuc50.dll, icudt50.dll, icuin50.dll [D:/depot/bas/741_REL/src/flat/nlsui0.c 1535] pid = 2560
PATH is currently set to D:\usr\sap\PS1\DVEBMGS00\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\j2sdk1.4.2_24-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\PS1\SYS\exe\uc\NTAMD64 [D:/depot/bas/741_REL/src/flat/nlsui0.c 1538] pid = 2560
stopping on error 13 during MAIN IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 13
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 13
meaning:
A tool used by tp got a signal from operating system
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: stopping on error 13 during MAIN IMPORT
SAPup> Process with PID 7332 terminated with status 13 at 20140519045404!
Thank you,
Mohan Karamala. -
What are the things to check after full imp in 10g?
Dear all,
Source
=======
OS server ==> HP-UX
Oracle version ==> Oracle 9.2.0.8
DB Name ==> MSST
DB total users ==> 320
Full export in ==> /u02/export/Jan09.dmp
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server ==> HP-UX
DB Name ==> CHDB
Existg DB users ==> 20
Oracle version ==> Oracle 10.2.0.4
copied 9i dump file in ==> /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
Imported successfully with few errors like
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
What are the things to check after full imp in 10g?
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
DATABASE LINK 2
FUNCTION 23
INDEX 1795
LOB 6
PACKAGE 8
PACKAGE BODY 8
PROCEDURE 30
SEQUENCE 67
SYNONYM 60
TABLE 644
TRIGGER 3
VIEW 20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
INDEX 1794
PROCEDURE 30
TABLE 644
TRIGGER 3
VIEW 20
FUNCTION 23
SYNONYM 60
PACKAGE BODY 8
SEQUENCE 67
PACKAGE 8
LOB 6What are the things to check after full imp in 10g?Only public database links which are in use by your these users which you export/import (Only if you did user level export/import and not DB level).
If you log files does not show error during creation of any object, you don't need to double check any thing. Otherwise do on with the method which you mentioned by counting the objects.
Or you can create a database link from source to destination and use a query with MINUS to find out if there is any object missing
select object_name,object_type from user_objects
MINUS
select object_name,object_type from user_objects@destination_database;Salman -
Checklist to check after SP upgrade
Hi Experts,
We are planning a system upgrade from SP15 to SP27 very soon.
Is there any kind of check-list which can provide us the options to check after post-upgrade of the system?
Any kind of help/ documents/links related with checklist would be helpfull.
Note that the current version being used is BI 7.0
Regards,
Arpit
Edited by: apkmnp on Mar 8, 2012 11:58 AM
Edited by: apkmnp on Mar 8, 2012 11:59 AMHi,
The basic checklist for a SP upgrade would contain tasks like below
Before Upgrade:
-check if the objects are active.
-initialize the deltas
After Upgrade:
-create a infopackage/dso/cube etc
-run the delta DTPs
-run the full DTPs
-run the delta InfoPackage
-run the full InfoPackage
-run the APDs
-execute the queries in RSRT
-execute the process chain
-edit the psa
-delete data from PSA, DSO, changelog, cube
-load data to the dso cube etc
-comress your cube
-Extract data from R3/ XI (PI) if connected or any other source system.
-load your masters
-run the attribute change run for the masters
-run your important programs
-post data in R3 and pull it to BW
-Create workbook
-create query variants
And if any critical or specific tasks you perform you would have to check those.
Hope this helps
Regards,
Joe -
Doesn't print the checks after i input them on a document (adobe reader xi)
Doesn't print the checks after i input them on a document
It's possible the fields were set not to print... Impossible to say for sure without seeing the file.
Also, which version of Reader and which OS are you using? -
SUM - How to check which phase is running in logs
Hello!
I'm asking if it's possible to check which phase is running in SUM without GUI? I have access only to logs. It is a ERP 6.0 to ERP 6.0 EHP5 in linux and db2.
I hope you can help me.
Thank you!
Darío.Thank you Reagan Benjamin, I figured out that ULOG14_1 file in <upgrade_directory>/abap/log directory provides the information I was looking for.
Regards, Darío -
Quality Check after launch pick release and before shipment
Dear All,
This is our client requirement to have Quality Check after launch pick release and before shipment in order management.Can any one please help in this regard?We are also using process Manufacturing Module?
Regards
NaveedSee if this helps
A Guide to Oracle Quality: An Oracle White Paper [ID 248331.1]
Mahendra -
Dear colleagues,
Is any posilble check or test (benchmark) of DB performance before and after CPU patching?
Any testing SAP or SQL report, which makes a load on DB?
Thank you for advice.
Best Regards
Jakub Vaněk> Is any posilble check or test (benchmark) of DB performance before and after CPU patching?
> Any testing SAP or SQL report, which makes a load on DB?
Those test would be synthetic and may or may not reflect your current environment.
I'd check some long running reports in your environment if you see any difference.
Markus -
Perform check after release step of purchasing requisition
Hi,
does anybody have a suggestion where to place best some logic which needs to be performed after a release step is performed successfully.
background: we use different types of Purchase requisitions, while each one is assigned to a static release strategy. I like to change it in more dynamic way by adding certain logic after a release step is performed.
example: if preceeding release step was 10 and purchase requisition is of type x then check purchase value and account assignment in order to process the current stepo automatically.
Currently the logic runs during a nightly job, but I would like to add it immediately after a release has been performed. I would imagin something like user exit, BusinessAddIn, or an event which I can use assign the job.
Can anybody suggest something?
Thanks in advance
Best regards
Torsten
Edited by: Torsten Hübsch on Apr 29, 2011 10:36 PMHi,
Enhancement M06B0005 is relevant for PR in case of overall release
Check on trx SMOD :
Enhancement M06B0005
Short text Changes to comm. structure for overall release of requisistion
--> Function module Short Text
EXIT_SAPLEBND_004 Changes to Communication Structure for Over.
Enhancement M06B0002 is for item-release
Short text Changes to comm. structure for purchase requisition release
-->
Function module
EXIT_SAPLEBND_001
BR
Nadia Orlandi -
Replacement check after processing escheatment
Hi-
On my ISU project, we are using an outside tool to perform the escheatment process and steps on unclaimed customer credit refund checks. The checks have to be voided after 180 days then moved to a specified GL account. One way to achieve the reclassification of the credit is to specify a GL account in the Escheatment configuration. After the checks are voided and escheated, we need the ability to issue a replacement check if the customer comes forward before the dormancy period is reached. The system allws the creation of a replacemen check but no GL entry occurs when the replacement check is created. I would have expected the configured escheatment GL account to be debited at a minimim.
I
s there anything I am missing?.
Any help will be appreciated.
Regards,
Myes the processing mode is delete for sender communication chennal.
I have created the other test scenario to test the processing mode is delete its working for other communication chennal. and my scenario also worked upto last 2 days. i have done delta cache and also created the new communication chennal even no luck.
00:06:47 Success The message status set to DLNG.
22.04.2009 00:22:42 Success The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
22.04.2009 00:22:42 Success The message was successfully transmitted to endpoint http://SAPRtest.test.com:8047/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
22.04.2009 00:22:42 Success The message status set to DLVD.
22.04.2009 00:23:12 Error Attempt to delete file "abc.dat" after processing failed. Retry
Please help me to reslove this.
Thanks,
Venkat. -
Services to be checked after system restart for getting system status
Hi,
We are trying to identify all the services that are to be checked before we confirm that a system is available.
While performing a system status check on J2EE instances after restart of the system , after getting a respone on TELNET to the HTTP Port sometimes the system was found to be not completely up.
We have observed that though the server processes are down HTTP service responds to user requests.
Could you please help identify the other services which must also be checked to be completely sure that the system is UP ?
We have gone through the document "TCP/IP Ports Used by SAP Applications" in SDN.
But It doesn't talk about the ports to check for Java server processes.
For ABAP we do a telnet on Message server and so far we got it right.
Should we check on other services as well in ABAP stack systems to confirm on their availability?
Thanks
Prateek
Edited by: Prateek Gupta on Dec 5, 2011 8:32 AM
Edited by: Prateek Gupta on Dec 5, 2011 8:48 AMHi Prateek,
Please use below command to check if JAVA Stack/Instance is UP and Running or not.
jcmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
Then goto option 20 and you can find there Dispatcher, Server0 and SDM are UP and Running or not.
If everything is Up and Running, then you can goto your browser and paste there:
http://Hostname:5<XX>00
where <XX> is the System Number where your Java enginee/Stack is present.
In order to check ABAP Enginee is Up or not, you can check like this:
dpmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
it will show your work process are running or not.
Maybe you are looking for
-
My workaround for "An unknown error occured (-36)"
I have a fairly new iPod Shuffle, running Win 2000 SP4, iTunes 4.7.1.30, and apart from the first time after (re)installing the iPod Setup software, every time (without fail) I plug my Shuffle into my computer and try to transfer songs onto/off it, I
-
INVOICE or CREDIT MEMO in BAPI 'BAPI_ACC_INVOICE_RECEIPT_POST'
Hi, I use BAPI 'BAPI_ACC_INVOICE_RECEIPT_POST' I search the parameters field in the BAPI ' BAPI_ACC_INVOICE_RECEIPT_POST' to fill the type of document " INVOICE or CREDIT MEMO. " best regard
-
It just shows the USB cable, at the bottom and Itunes logo at the top. It won't let me go into the hompage and I can't connect it with Itunes, cause of the passcode I have on it.
-
Updating a derived column of a table
Hi everyone, Can you please help me and give me a solution for this I have 3 columns paydate, expdate, NewRenew in a table. If the paydate is greater than 90 days than exp date I need to update NewRenew column to N and If the paydate is less than 90
-
Creating Allwayon SQL cluster for MS SQL Resource proidver.
Hi All, i have set up SQL Alwayson 2014 Enterprise and also a File server cluster in order on connect both to the WAP. i was able to create the SQK WAP on the admin portal group with the file server cluster. but when i am trying to connect the MS SQL