Checks in RSRV for BIA
Can anybody explain the difference between the checks in RSRV concerning BIA :
'Check definition of logical index' and 'Compare index defintion with database table'. They seem to be simular.
Hi HS,
<b>Check Definition of Logical Index</b>
The system compares the definitions of each of the indexes for a BIA index with the current versions of the database tables. It checks whether the number, name, and type of the table fields in the database match the definition for the index on the BI accelerator server.
An index may have changed if, for example, the InfoCube was changed. If this is the case, the BI accelerator index has to be repaired (see test BIA Index Adjustments After InfoCube Activation).
<b>Compare Index Definition in BIA with Table on Database</b>
The system checks the logical index of a BI accelerator index. The logical index contains the metadata of the BI accelerator index, such as the join conditions and the names of the fields.
The logical index may change if, for example, the InfoCube has been changed. If this is the case, the BI accelerator index has to be repaired (see test BIA Index Adjustments After InfoCube Activation).
Regards,
Anil
Similar Messages
-
Batch Job BITRP...for BIA
Hi,
I see some batch jobs running automatically in BI 7.0.
Their name starts from BITRP......
Example - BITRP_43AJDF38O1HJUOTHY1PX8DHXW
I can see that it is related to BIA Index activation. How they are running automatically. Is it schduled automatically somewhere.
Please let me know if anybody has any idea.
YOu rhelp will be appreciated.
SCcan you make out the cube name from the job its running??
In either case(Y/N) goto Transaction RSDDV>select the Infocube>Hit the BIA Index button-->select 'Application Logs' option and try selecting options
Initial filling
Roll up
Check
individually to verify the job running same is either any of this processes described.
Aforementioned would conclude which process for BIA index is running and from the BIA index admin wizard you can either stop or continue with as per your requirement.
I reckon in the earlier post of yours,you did try tweaking(initial filling of indexes) with the BIA that could have triggered the job.
Hope it Helps
Chetan
@CP.. -
When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
ThanksLet's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.
Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L -
HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html -
Standard Report to check consumption values for multiple materials
Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
SwapnilDear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF Material analysis: Dates
MCPO Material analysis: Quantities
MCPW Material analysis: Lead time
Regards
Mangalraj.S -
Any report to check vacation rule for users?
any report to check vacation rule for users?
Hello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas -
When I initially try to sign in to iCloud, I get the "Account not verified" screen and I am told to check my email for instructions to verify. No email is ever sent. My ID and password work on all other Apple app's. Why not for iCloud?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase
Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
FranciscoHello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
The process lsattr puts out:
realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
Total Paging Space Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
8192MB 1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
The installation phase is starting now. Please look in the log
file for further information about current actions.
INFO 2010-08-04 10:12:31
Requesting Installation Details
INFO 2010-08-04 10:12:31
Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
Choose the number of storage paths for DB2's Automatic Storage
Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
Calculating RAM Distribution
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
Creating the SAP connect user
INFO 2010-08-04 10:12:32
Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
Setting the User Password
INFO 2010-08-04 10:12:32
Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
Creating Directories
INFO 2010-08-04 10:12:32
Creating Symbolic Links
INFO 2010-08-04 10:12:32
Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
Checking Available Space for the DB2 UDB for UNIX, Windows
Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards -
Cross Company Stock Transfer- Please check excise base for the item is zero
Hi,
My scenario is Cross company Stock transfer (Two different Company Codes)
I have done following steps :
1.Create Purchase Order
2.Create Outbound Delivery for Purchase Order
3.Post Goods Issue for Delivery
4.Creating Billing Document
5.Creating Excise Invoice
6.Printing of Excise Invoice
7.Post Goods Receipt for Stock Transport Order
Till MIGO there is no problem.
I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
"Please check excise base for the item is zero" - Message no. 4F121
Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
Pl. help
Thanks
VikasHi
The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
Hear you can maintain all the chapter id, register A or C, etc
and then try doing GR,
The other way and the permanent solution is
VPRS or equivalent
Condition class B Prices
Calculat.type C Quantity
Condit.category H
Cond.control H Condition value fixed
Condit.origin A Automatic pricing
In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
Regs
Niti Narayan -
I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?
I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.
-
Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William
reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates. -
I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank youThis worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105 -
How to check with table for cursor..?
How to check with table for cursor..?
Here I have Table temp_final_plan
Here i want to update if already exit...below is the procedure....
CREATE OR REPLACE PROCEDURE spu_final_profit_plan
AS
-- Constant declarations
ln_errnum number := 0;
-- Variable declarations
ls_errmsg app_errors.err_msg%TYPE;
ls_appmsg app_errors.app_msg%TYPE;
ls_appid app_errors.app_id%TYPE;
-- Cursor declaration for final_update_el
CURSOR cur_final_update_el IS
select '910' ent,
'9127316' center,
post_acct,
sum(avg_mtd_01) sum_avg_mtd_01,
sum(avg_mtd_02) sum_avg_mtd_02,
sum(avg_ytd_01) sum_avg_ytd_01,
sum(avg_ytd_02) sum_avg_ytd_02
from mon_act_cypy
where rec_type = 'A'
and sum_flag = 'D'
and yr = '2008'
and substr(ctr_or_hier, 1, 2) = 'el'
and ent || sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by post_acct
having sum(avg_mtd_01) <> 0
or sum(avg_mtd_02) <> 0
or sum(avg_ytd_01) <> 0
or sum(avg_ytd_02) <> 0;
-- Cursor declaration for final_update
CURSOR cur_final_update IS
select b.plan_ent b_plan_ent,
b.plan_ctr b_plan_ctr,
a.post_acct a_post_acct,
sum(a.avg_mtd_01) sum_avg_mtd_01,
sum(a.avg_mtd_02) sum_avg_mtd_02,
sum(a.avg_ytd_01) sum_ytd_mtd_01,
sum(a.avg_ytd_02) sum_ytd_mtd_02
from mon_act_cypy a,
plan_unit_tbl b
where a.ent || a.ctr_or_hier = b.ent || b.ctr_or_hier
and a.rec_type = 'A'
and a.sum_flag = 'D'
and a.yr = '2008'
and b.hier_tbl_num = '001'
and a.ent || a.sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by b.plan_ent, b.plan_ctr, a.post_acct
having sum(a.avg_mtd_01) <> 0
or sum(a.avg_mtd_02) <> 0
or sum(a.avg_ytd_01) <> 0
or sum(a.avg_ytd_02) <> 0;
-- Begin the procedure body
BEGIN
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
EXIT WHEN rec_final_update_el%NOTFOUND;
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update IN cur_final_update
LOOP
EXIT WHEN rec_final_update%NOTFOUND;
IF rec_final_update. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update.sum_avg_ytd_02,
WHERE ent = rec_final_update.b_plan_ent
AND center = rec_final_update.b_plan_ctr
AND post_acct = rec_final_update.a_post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update.b_plan_ent,
rec_final_update.b_plan_ctr,
rec_final_update.a_post_acct,
rec_final_update.sum_avg_mtd_01,
rec_final_update.sum_avg_mtd_02,
rec_final_update.sum_avg_ytd_01,
rec_final_update.sum_avg_ytd_02);
END IF;
END LOOP;
-- EXCEPTION handling section
EXCEPTION
-- Fire OTHERS Exception case by default
WHEN OTHERS THEN
-- ROLL BACK Transaction, if any failure
ROLLBACK;
ln_errnum := SQLCODE;
ls_errmsg := SUBSTR(SQLERRM, 1, 100);
-- Log the ERRORS into APP_ERRORS table using SPU_LOG_ERRORS procedure
spu_log_errors(ln_errnum, ls_errmsg, ls_appid, ls_appmsg);
-- End of the stored procedure
END spu_final_profit_plan;
[\pre]I'm not sure what you mean by, 'How to check with table for cursor..?' but I'll offer a comment on your Code Snippet. I think you want to know how to check if a record exists so you know if you need to perform an INSERT or an UPDATE.
Here is a snippet of your code. I'll put my comments in "Comment" style in your code.
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
/* There is no need to test for %NOTFOUND since you are using Cursor FOR Loop!
** This construct automatically exits when the last record is processed. */
EXIT WHEN rec_final_update_el%NOTFOUND;
/* Is this where you would like to know how to Check if the record already exist??
** I asked this because, 'rec_final_update_el.' is not valid syntax. Are you looking for
** an Cursor Attribute or Method you can check here?
** I would suggest a Primary Key or Unique Index on ENT, CENTER, and POST_ACCT
** on the TEMP_FINAL_PLAN table. Then simply perform an INSERT and code an
** Exception to UPDATE when you get a DUP_VAL_ON_INDEX exception. Otherwise,
** you will need to simply run an Implicit or Explicit Cursor to test if the row exists and
** use this return value to determine if you should INSERT or UPDATE. */
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;I hope I've answered your question, but if I haven't please provide more details so we can better understand your request.
Craig... -
Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
RakeshHi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
KDE4 "When lid closed" event problem
Hi, i'm using updated Arch Linux system with KDE4. My problem is, that KDE Power Manager does not hear on lid close event. I can choose everything from menu (suspend, lock screen, ...) but it does nothing. After closing the lid, system follows "Do no
-
Hi, In J2SE, while using SSL, we create key-stores and trust-stores using keytool. Now, if I want to use HTTPS to transfer a msg to a Server that is implemented in C, how do I go about... Here I have my client implemented in Java? Will trust-store ex
-
Selection Screen INFO : selinfo
Hi, I am using the FM: RS_SELECTIONS_DESCRIPTION to read the selection screen structure. The resulting List is of the structure selinfo. My system does'nt shows its documentation. I have trouble understanding its meaning. The fields are : 1. name 2
-
SS_ACTIONS always empty
I'm new to ECM but what I gathered is that SS_ACTIONS should return a list of actions allowed to the current user to act on the document. For example, accessing http://ecmserver/idc/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=SOME_DOC&placehold
-
Cannot Update Any Adobe Apps, Patch Failed
Hello, I'm having some major issues updating my apps. I've now uninstalled many times and reistalled many times. I've tried many suggestion with no luck.