Checque lot creation error

hi....
when i create the chk lot than system showing msg.
"Check the format of the check numbers"
I want to know can we change the check no. digits?.before that we give the numbers digits 4 and now we giving 6.
Thanks & regards
Rekha sharma

Hi,
This error is normal, when the structure of the check numbers change from the previous lot.
To prevent this error, change the message control settings.
Go to IMG>Cross-Application Components -> Bank Directory -> Change Message Control
Application Area - FIBL
Message Number: 664
You can chagne the Online & batch to be S where it displayes information in the footer.
Regards,
Sridevi

Similar Messages

QM-SD: Sales Return Inspection lot status Error

Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status Error

Dear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh

SD-QM: Sales Return Inspection lot status Error

Hello Expert,
I want to post Goods receipt in a Returns delivery with QM activated in the material but the following message is displayed:
Status of inspection lot 060000000001 / partial lot 000000 does not allow good issue
Message no. VL171
The inspection type is 06 (Inspection for Returns from Customer).
The movement type is the 651.
I thought that the inspection lot was created when you post the Good receipt, not when you create the delivery, and the stock material would be Qual. Inspection. So, then I should run QA11 click on Accepted in the UD to transfer the stock to Unrestricted use.
Summarizing, the inspection lot is being created when I create the delivery. I can post GR only after running QA11. But then another inspection lot is created and the stock is posted in Returns. I think that the standard should not work like this.
Please let me know what could be the reason for the error for goods issue for sales return?
Thanks in advance.
Pablo
Sales Return Inspection lot status Error

Dear Nunez
1) 06 inspection lot gets created when you create a delivery not when you do the GR.
2) for 651 movement type only 06 inspection lot will be created and this lot will not be stock specefic. You cannot do stock posting for this lot
3) if you need an inspection lot while doing the GR of the delivery then kindly do the following
1) make use of movement type 653 instead of 651
2) activate 05 inspection in the material master. (deactivate 06)
3) for delivery type LR ( the delivery type you are using for the return ) maintain 05 inspection type in the config
SPRO > QM> Quality Inspection> Inspection Lot Creation>Inspection at Shipping>Assign Inspection Lot Origin to Delivery Type>LR 05inspection type.
Now create the return sales order and then do PGR. inspection 05 will be created. you can do the stock posting in this lot
regards
gajesh

Stock Transfer to quality without Inspection lot creation

Hi,
I want to do stock transfer from unrestricted stock of Plant A to quality stock of Plant B. However I don't want inspection lot to be created.
Is this possible?
I am using Movement type 301 and Inspection Lot of type 08 is active in Material Master.
If I deactivate QM for movement type, can I post to quality without inspection lot creation.
Thanks

Do you have any inspection type setup for material in plant B? If yes then you would be not able to transfer stock in QI without creating an inspection lot. If inspection type is active in material master of plant B(destination) then system would through you error message saying - "transfer stock in QM only". The reason is you would not have an option to move stock from QI using 321 (QI to UNR) in plant B if QM is active. 321 managed by an insp lot.
If inspection type is not setup in material master at plant B then you would be able to post stock in QI without creating an inspection lot. Then move stock from QI to UNR using 321 (MB1B).
Hope this clarify you.

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Inspection lot creation

Dear Experts,
Reqiurement as follow :
We have four plant like 1000,1001,1002,1003,1004
System creates inspection lot when we do GRN against in stock transfer PO when STO from
1000 to 1004, 1001 to 1004, 1002 to 1004, 1003 to 1004, as we have activated inspection type 08,01 in MMR.
My requirement is system should not create inspection lot when STO from 1003 to 1004 only.
We can not deactivate inspection type as we need inspection lot when STO from other plant.
Please help in this scenario.

In QM, we can deactivate the quality for certain movement type.That means though QM is active in material master, if we are using any movement type for which QM is not active, it will not generate the inspection lot. For STO from plant 1003 to 1004, use the movement other 101 i.e copy of 101.
Copy 101 movement say as 901.Using following path deactivate QM for this new movement type 901.
SPRO - QM - Q. Insp - Insp lot creation - Insp for goods movement - Deactivate insp for movement type. Select the indicator "QM not active".
Now use movement type 901 for STO from plant 1003 to 1004.
Vishal Jonnalwar

IP Profile and lots of Errors

Hi folks, a few weeks ago i phoned up about my speed and was told that my IP Profile was stuck, after the usual 10 days it was still stuck so i called again and they tried to reset again and i have waited again and it is still at 2MB, This was over two weeks ago
Here is the stats from my router:
Uptime: 7 days, 2:37:56
DSL Type: G.992.1 annex A
Channel mode: Fast
Maximum Bandwidth (Up/Down) [kbps/kbps]: 1,040 / 7,456
Bandwidth (Up/Down) [kbps/kbps]: 448 / 7,424
Data Transferred (Sent/Received) [kB/GB]: 0.00 / 24.98
Output Power (Up/Down) [dBm]: 12.0 / 19.5
Line Attenuation (Up/Down) [dB]: 19.0 / 36.0
SN Margin (Up/Down) [dB]: 22.0 / 5.0
Vendor ID (Local/Remote): TMMB / P
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 22,983 / 0
FEC Errors (Up/Down): 15 / 0
CRC Errors (Up/Down): 12 / 1,198,945
HEC Errors (Up/Dow
Download speedachieved during the test was - 1.92 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :7.42 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
There are lots of errors also which makes me think there is a fault somewhere.
I was told that i should be getting around 4-6MB when we moved here a couple months ago
I have tried all the usual tests and had the router plugged into the master socket for 14 days at one point but there was no improvement.
I have even changed the BT Homehub V3 to my old Plusnet Thompson 585 router.
Still no change
Any ideas
Thanks

Hi skiprat1977,
If you fill out the contact us form located in the about me section of my profile, we can look into this for you.
Cheers,
Chris
BT Mod Team
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Batch status at recurring insp lot creation

We have setu recurring insp 09 for few materials. We use "insp stock at creation" option. So system work as expected and create lot and put stock in QI, but still batch status remain "unrestricted". Our req is at the time of lot creation it self system should set batch status as "restricted". How to setup it?
When system setup "restricted" status for recurring batch? Help appreciated.

check option
Recurring Inspection: Block Batch at Lot Creation
Specifies, that a batch is blocked, when the inspection lot is created, if the inspection date lies within the opening period.
Use
If you choose this option, batches are blocked, if their next inspection date lies within the opening period:
If the batch status management is active in the corresponding plant, the batch status is changed to "restricted".
If the batch status management is not active in the corresponding plant, the batch stocks are transferred to the blocked stock.
If the batch status has changed or a transfer posting takes place, a new inspection lot is created for each storage location.
If a relevant inspection lot already exists and the next inspection date has already been reached, the change of the batch status or the transfer posting also takes place

Change of Inspection Lot Specifications at the time of lot creation

Hi,
We are using In-process inspeciton.
At the time of Production Order release an Inspection Lot is created automatically.
We want the Lot Specification values to be changed based up on the Configuration of the Sales Order.
Is there any User Exit or BADI that can be used for this purpose?
Ramakanth

Hii,
Lot specifcation values cannot be changed once inspection lot is created. If u know specification only after creation of inspection lot then u include unplanned inspection charcteristics. Here u can define spec after lot creation also.
with regards,
K.Lokesh.

Inspection lot creation while partial comformation in 03 inspection type

Hi
I want inspection to be created while partial confirmation of operation in CO11N in 03 inspection.
It is happening with release of production order.
PLz let me know -if anybody can help.
Regards
Pooja

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection Lot creation for the 103 movement type

<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM

Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari

Inspection Lot Creation after UD

Dear PP/QM Masters,
I have question regarding inspection lot creation after UD for the same batch number.
There will be several GR during one shift for one SKU with the same batch number.
F.E. shift (6 am to 2 pm) at 7 there will be first GR of finished good. Inspection lot is automaticly created and QA at 9 will make UD for this lot. If production will made GR after that a new inspection lot will be created for the same production batch.
Is there any possibility to make only one inspection lot even if UD is taken.
Thanks and regards,

I guess what bothers me is that for your selection of "2" you include date. Our standard SAP system does not include date on that key choice. Just material/batch/storage location.
I re-tested one just to be sure. Created a new process order for 30. Reveived 15. Got an 04 inspection lot created. Processed the lot, posted out the 15 to unrestricted and made the UD with an Accept code.
Then I GR another 10. These went straight to unrestricted as I expected. Then I posted the final 5 in a 3rd GR. Same result.. straight to unresticited.
I'm not sure why your not seeing the same. Again, seeing that 'date' in your number # choice is bothersome. If some modified that to include the date of receipt and included the time stamp in that, then your going to get new inspection lots.
Are you sure they didn't post it to a different batch on the second or third posting. And of course, this does refer to the same process order.. correct? You not using three different process orders for this are you?
Craig

Inspection lot creation during STO return

Hello Gurus,
is there a trick to trigger inspection lot creation during STO return ?
Scenario is the following:
1 - Creation of STO
2 - Supplying plant ships materials... stock in transit
3 - Receiving plant receives materials
4 - Materials with defects -> Receiving plant add new line with return tick on the same material
5 - GI from Receiving plant... stock in transit
6 - Supplying plant receives materials -> Inspection lot has to be created
I used inspection type 08 on Receiving plant w/o success.
Many thanks.
Stéphane

No inspection lot is created when we return Materials to Vendor (Plant A) even if we maintain Inspection type 02.
Before STO customizing, Plant B creates a subcontracting purchase order. Next Materials are sending to Vendor (Plant A) and put in "Stock provided to vendor" (Transaction ME2O).
Vendor (Plant B) creates a Repair request (Sales document / Transaction VA01). Next run VRRE to reveice Materials to repair. Inspection lot is automatically created. The usage decision triggers the creation of Service order to manage all the repairing flow. Last step is to deliver Materials to Plant A and create Repair invoice.
Repair request supports all repairing flow (inspection lot, service oder...), especialy status (out of warranty or not).
After STO customizing, I expected the following result:
1° - Return STO to Vendor (Plant A) / ME21N with return tick
2° - Plant B ships Materials / MIGO wih 101 (SAP converts in 161)
3° - Stock in Transit
4° - Materials receive to Vendor (Plant B) / VL10B
5° - Creation Inspection lot
6° - UD triggered Service order creation
7° - ...Repairing flow with Service order...
8° - Materials ship to Plant B
9° - Repair invoice
10° - Stock in Transit
11° - Plant B receives Materials
As I said, there are 2 blocking points:
- Inspection lot not created when Vendor receives Materials
- Service order not created automatically (because no Repair request to support inspection lot, service order...)
Thanks a lot for your help.
Tell me if you have any questions.
Stéphane

Inspection Lot Creation after GR

Dear PP/QM Masters,
I have question regarding inspection lot creation after goods receipt.
There will be GR once at the end of the shift with batch number. As batch generated during shift will be different, there will be multiple GR entry. But for every material only one result recording per shift is required and not for all batches generated. So, how to avoid creation of so many inspection lot? Automatic Inspection lot creation is required hence no question of manual creation of inspection lot.
I checked function module QAPP_CUST_IP_CREATE for inspection point functionality but its description You can use the available function module to generate inspection points for the inspection during production already when the inspection lot is created. Can I use function module QAPP_CUST_IP_CREATE for restricting creation of inspection lot after GR?
Request all Masters to help me in solving this.
Thanks and regards,
Devang

Dear All,
First of all thanks a lot for your response.
I checked Control Inspection Lot setting but even that can not solve my problem as in our case though GR with confirmation will be once in a shift (though in system shift is not defined) but batches will be different and hence material document will be separate. And requirement is to have single inspection lot per shift even if batches and material documents are separate.
One option is to have multiple line items for GR in MB31 or MIGO or in COR6N. But all this transaction allows only one line item for GR against process order. So, can you suggest any function module or option to have multiple line items for GR.
Thanks and regards,
Devang

Checque lot creation error

Similar Messages

Maybe you are looking for