Cheque print: Spool list permission

Hi
We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
tx

Hi,
Please refer below post,
Re: Cheque: Printing problems

Similar Messages

  • Cheque Printing Spool Issues

    Dear Experts,
    After doing payment run through F110 and used the functionality of printing of the cheques through F110 only.
    Its created spool request of cheques.
    After printing the cheques the spool is not getting deleted immediately.
    In the properties of Spool, Delete after printing if no errors is active and in the field Deleted on is showing the future date (8 days from the date of spool generated)
    The spool must get deleted immediately after printing.
    Kindly advice.
    Uttam

    This is taken care by Basis team.
    They will give the settings in spool administartion, according to that setting if system reaches to certain limit of spools, they 'll delete automatically(old spools)
    Rgds
    Murali. N

  • List of Cheque Printing

    Dear All,
    Business using T-code F-58 to post out going payments to vendors, here posting is done in one place and cheque printing will be done in another country.
    2. Is there any report to see the list of cheques pending for print out.  T-code SP02 here we can list of spool requests.  But requirement is to see the cheque number, vendor details, and amount.
    Is there any solution to view all the pending list of to be printed cheques?
    Regards
    Partha

    No Srikant,
    Here no option to fine list of cheques which or not printed.  That means spool is generated, but printing is not happend.
    Requirement is to see the list of check (printed and not printed view).
    Regards
    Partha

  • Spool  List not printing in Background

    Hi,
       When i try to execute the report in background in development system i can able to see the spool list, whereas when i try to execute the same report in testimg server(may be with more data) i can not see the spool list but the job is in finish status.
    Please can i know the reason for the same.
    Thanks & Regards,
    Sudheer.

    Hi!
    This may be because you started the program with the option, not to create new spool request, or to delete the spool request immediately.
    When you run your program in background, check the printer options also.
    Regards
    Tamá

  • How find print program and form name from the spool list

    Hi,
          I have a requirement to find print program and form name from the spool list.
    I got the list of programs and forms from TNAPR table, I also want to find out any custom program sending the form directly to the spool.
    Cheers
    Sam

    Hi
    Try TSP01-Suffix2
    Regards
    Raj

  • How to Print records to spool list

    Hi All,
    I am creating an outbound interface with header, body and footer.
    I want to print each and every line of the interface file to the spool list.
    How to do this.
    Thanks

    Hi Abhishek,
    Try this way.
    REPORT ztest_notepad.
    "Variables
    DATA:
       l_lay    TYPE pri_params-paart,
       l_lines  TYPE pri_params-linct,
       l_cols   TYPE pri_params-linsz,
       l_val    TYPE c.
    *Types
    TYPES:
       t_pripar TYPE pri_params,
       t_arcpar TYPE arc_params.
    "Work areas
    DATA:
       lw_pripar TYPE t_pripar,
       lw_arcpar TYPE t_arcpar.
    l_lay   = 'X_65_132'.
    l_lines = 65.
    l_cols  = 132.
    "Read, determine, change spool print parameters and archive parameters
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        in_archive_parameters  = lw_arcpar
        in_parameters          = lw_pripar
        layout                 = l_lay
        line_count             = l_lines
        line_size              = l_cols
        no_dialog              = 'X'
      IMPORTING
        out_archive_parameters = lw_arcpar
        out_parameters         = lw_pripar
        valid                  = l_val
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF l_val  SPACE and SY-SUBRC = 0.
      lw_pripar-prrel = space.
      lw_pripar-primm = space.
      NEW-PAGE PRINT ON
        NEW-SECTION
        PARAMETERS lw_pripar
        ARCHIVE PARAMETERS lw_arcpar
        NO DIALOG.
    ENDIF.
    WRITE 'Output'.
    NEW-PAGE PRINT OFF.
    CALL FUNCTION 'ABAP4_COMMIT_WORK'.
    WRITE sy-spono.
    Thanks
    Venkat.O

  • Cheque: Printing problems: Tcode F110

    Hi
    We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
    If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
    tx

    Yes, and all are sucessfull.
    What i cant understand is that both users have the same profile/role/authorization. Why can one print to the cheque printer and the other can't.
    Are there any additional configuration needed per printer which allow only spesific/dedicated users to print to the cheque printer?

  • Cheque: Printing problems

    Hi
    We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
    If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
    tx

    Please do the following
    Ask the user who has problems printing to go to transaction SU3 and then to defaults tab.
    He needs to check if Printer name is entered in the Output
    Device.
    And print immediately check box is checked.
    Hope this helps

  • Print spooler crashes whenever I try to print to Deskjet F4280 over the network.

    Greetings,
    I have a nice and cheap F4280 connected to my computer via USB. My computer is running Windows XP SP3 (downgraded from Vista, had the same problem with Vista as well). I can print fine from my printer, but whenever I try to print from a laptop over the wireless network, the print spooler on my computer crashes and the F4280 doesn't do anything.
    I downloaded a Microsoft tool to restart the print spooler, but when I resend the document to the printer over the netword, the spooler drashes again.
    I've downloaded all the latest drivers, and attempted to run the critical patch, but an error message said I was already up to date and didn't need to install it.
    Does anyone have any ideas?

    Resolution/Fix:
    You first need to clear out your print queue to prevent the print spooler from crashing again.
    On the computer designated as the server do the following:
    Stop the printer spool service by right clicking on your My Computer icon and selecting "Manage"
    Expand "Services and Applications" and the click on services
    Browse through the list of services and find "Printer Spooler".
    Right click on the "Print Spooler" service and select "Stop" if Stop is grayed out or disabled and "Start" is an available option, then the service is already stopped.
    Go to the c:\Windows\System32\Spool\Printers folder
    You should see some files in this directory with a .SHD file extension or a .SPL extension you will want to delete these. In some cases you may see other files in this directory as well, and in general it is safe to delete them. Files besides the .SHD and .SPL should be backed up before you delete them to be safe.
    You may either reboot the computer or Start the "Print Spooler" service manually.
    Once your print spool is clear you can now proceed with the following on the server computer:
    Click on Start then control panel, and then Printer and Faxes
    Right click on the HP Deskjet F4280 printer and select Properties
    Click on the Advanced tab
    Uncheck "Enable advanced printing features"
    Click the OK button
    You should now be able to print fine from any computer on the network

  • Spool List more than 99 pages to PDF File to Mail

    Hi All,
    I want to convert a big spool list (342 Pages) to PDF file to send it by e-mail.
    I use the following code to convert my spool to PDF file:
    Convert to PDF file*
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid              = w_spool_id
          no_dialog                = 'X'
          dst_device               = c_device
        IMPORTING
          pdf_bytecount            = gd_bytecount
        TABLES
          pdf                      = it_pdf_output
        EXCEPTIONS
          err_no_abap_spooljob     = 1
          err_no_spooljob          = 2
          err_no_permission        = 3
          err_conv_not_possible    = 4
          err_bad_destdevice       = 5
          user_cancelled           = 6
          err_spoolerror           = 7
          err_temseerror           = 8
          err_btcjob_open_failed   = 9
          err_btcjob_submit_failed = 10
          err_btcjob_close_failed  = 11
          OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings*
      LOOP AT it_pdf_output.
        TRANSLATE   it_pdf_output           USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT  gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    The problem with the FM 'CONVERT_ABAPSPOOLJOB_2_PDF' is when my spool have more than 99 pages. In this case, the FM generate a backscreen job (sm37) to convert my spool and generate a binary PDF spool.
    After this step, the 'FM SO_DOCUMENT_SEND_API1' send an e-mail with the binary PDF File recovered in the spool list but i can't open the file with Adobe Reader because the format is wrong.
    Someone knows how could i convert my big spool list to PDF file to send it by e-mail adress ?
    Thanks a lot for your precious help that i need so much !

    Generate big spool list
    REPORT  ZGEN_SPOOL.
    tYPE-POOLS: slis.
    TYPES: BEGIN OF str_mara,
    matnr TYPE mara-matnr,
    ersda TYPE mara-ersda,
    ernam TYPE mara-ernam,
    laeda TYPE mara-laeda,
    aenam TYPE mara-aenam,
    vpsta TYPE mara-vpsta,
    END OF str_mara.
    DATA: i_mat TYPE TABLE OF str_mara,
    wa_mat LIKE LINE OF i_mat.
    DATA:params LIKE pri_params.
    DATA: days(1) TYPE n VALUE 2,
    valid TYPE c.
    DATA: obj TYPE REF TO cl_salv_table.
    SELECT matnr
    ersda
    ernam
    laeda
    aenam
    vpsta
    UP TO 4999 ROWS
    FROM mara INTO CORRESPONDING FIELDS OF TABLE i_mat.
    TRY.
    CALL METHOD cl_salv_table=>factory
    IMPORTING
    r_salv_table = obj
    CHANGING
    t_table = i_mat.
    CATCH cx_salv_msg .
    ENDTRY.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    * destination = 'QAS'
    list_name = 'ZTEST_VERTEX'
    list_text = 'TEST'
    no_dialog = 'X'
    immediately = ' '
    expiration = days
    IMPORTING
    * OUT_ARCHIVE_PARAMETERS =
    out_parameters = params
    valid = valid
    * VALID_FOR_SPOOL_CREATION =
    EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params = 2
    invalid_archive_params = 3
    OTHERS = 4
    IF sy-subrc ne 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    TRY .
    NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
    CATCH cx_sy_nested_print_on .
    ENDTRY.
    CALL METHOD obj->display.
    NEW-PAGE PRINT OFF.

  • Spool List output display 255 char when the rpt is run in Background

    Hi Friends,
    I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
    Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
    My Problem:
    1. The spool list is truncated after 255 characters when i run in background.
    2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
    3. I ve not used any Standard - line size for dislaying ..
    4. In foreground i am able to display all the 64 columns... Y not in Background......
    5. My Printer setting is ..X_255 .... only ...
    Requirement:
    1. What should i do to increase the spool list display to more than 255 characters
    2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
    Expecting your answers,
    Thanks in Advance...
    Cheers,
    R.Kripa .........
    Enjoy ABAPing ..........
    new upcoming Abaper ....

    Hello Kripa,
    You need to perform two actions.
    1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
    or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
    When you give your report in background, do not forget to choose the new format you created.
    2. After the spool request is created, you take its number and use it ar a parameter in the following report.
    Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
    It should work then.
    roxani
    Display spool list > 255 columns
    This is a SAP utility report to allow display of
    spool request lists with line size more than 255 characters in
    releases 4.6B and 4.6C (4.6D kernel must be used)
    REPORT ZRSPOSHOWLIST LINE-SIZE 80.
    PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
    FIRSTL TYPE I DEFAULT 0,
    LASTL TYPE I DEFAULT 0.
    global data from LSPOXTOP
    DATA: RC(10) TYPE C,
    ERRMSG(100) TYPE C,
    STATUS LIKE SY-SUBRC,
    DSN_TYPE(8) TYPE C.
    DATA: BEGIN OF DATA_SET_LINE,
    DATA_LENGTH(5),
    PRECOL(1),
    DATA_LINE(1000),
    DATA_LINE(5000), "MODAB
    END OF DATA_SET_LINE,
    DATA_SET_LENGTH(5) TYPE C.
    TABLES: TSP01, TST05, TSPOPTIONS.
    DATA: TEMSE_NAME LIKE TST01-DNAME,
    TEMSE_CLIENT LIKE TST01-DCLIENT,
    TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
    TEMSE_PART LIKE TST01-DPART,
    TEMSE_OBJTYP LIKE TST01-DTYPE,
    TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
    TEMSE_CHARCO LIKE TST01-DCHARCOD.
    DATA: IS_OTF.
    global data from LSPOCTOP
    DATA: BEGIN OF SPOC
    , escape
    , prtctrl
    , FIRST_BYTES(4) " collection of the first bytes of the
    " escape sequences, which I am searching for.
    , PRTCTRL_START_LENGTH TYPE I
    , PRTCTRL_TOTAL_LENGTH TYPE I
    , PRTCTRL_START(10)
    , SYMBOL_LOW_START(10)
    , SYMBOL_HGH_START(10)
    , SYMBOL_START_LENGTH TYPE I
    , ICON_START(10)
    , ICON_START_LENGTH TYPE I
    , ICON_SEL TYPE I VALUE 1
    , FRAME_START(10)
    , FRAME_START_LENGTH TYPE I
    , END OF SPOC.
    FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
    , <SPOC_FRAME> TYPE C
    , <SPOC_ICON> TYPE C
    , <SPOC_SYMBOL_LOW> TYPE C
    , <SPOC_SYMBOL_HGH> TYPE C
    copied from RSPO_DISPLAY_ABAP_SPOOLJOB
    DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
    TABLES: TSP02L.
    SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
    IF SY-SUBRC <> 0.
    WRITE: / 'Spool request does not exist:'(001), RQIDENT.
    EXIT.
    ENDIF.
    CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
    EXPORTING
    ACCESS = 'DISP'
    SPOOLREQ = TSP01
    EXCEPTIONS
    NO_PERMISSION = 1
    OTHERS = 2.
    IF SY-SUBRC <> 0.
    WRITE: / 'No authorization to display'(002).
    EXIT.
    ENDIF.
    PERFORM READ_DATA TABLES BUFFER
    USING TSP01 FIRSTL LASTL.
    IF SY-SUBRC <> 0.
    WRITE: / 'Error reading spoolo request'(003).
    EXIT.
    ENDIF.
    IF IS_OTF = 'X'.
    WRITE: / 'This spool request is not an ABAP list'(004).
    EXIT.
    ENDIF.
    PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
    FORM GET_SPOOL_LINE.
    DO.
    IF TEMSE_RECTYP+1(1) = 'Y'.
    CALL 'C_RSTS_READ'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'BUFF' FIELD DATA_SET_LINE
    ID 'BUFFLG' FIELD 1006
    ID 'BUFFLG' FIELD 5006 "MODAB
    ID 'ALLINE' FIELD 'X'
    ID 'BINARY' FIELD ' '
    ID 'SHOWLG' FIELD 'X'
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    ELSE.
    CALL 'C_RSTS_READ'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'BUFF' FIELD DATA_SET_LINE+1
    ID 'BUFFLG' FIELD 1005
    ID 'BUFFLG' FIELD 5005 "MODAB
    ID 'ALLINE' FIELD 'X'
    ID 'BINARY' FIELD ' '
    ID 'SHOWLG' FIELD 'X'
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
    DATA_SET_LINE-PRECOL = ' '.
    ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
    ENDIF.
    STATUS = SY-SUBRC.
    IF STATUS <> 6. " EOF, error condition, or got data
    EXIT.
    ENDIF.
    end of this part, try to open next part
    ADD 1 TO TEMSE_PART.
    CALL 'C_RSTS_CLOSE'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    IF STATUS = 0.
    CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
    EXPORTING
    AUTHORITY = 'SP01'
    CLIENT = TEMSE_CLIENT "hjl
    NAME = TEMSE_NAME
    PART = TEMSE_PART
    IMPORTING
    CHARCO = TEMSE_CHARCO
    CREATER =
    CREDATE =
    DELDATE =
    MAX_CREDATE =
    MAX_DELDATE =
    NON_UNIQ =
    NOOF_PARTS =
    RECTYP = TEMSE_RECTYP
    SIZE =
    STOTYP =
    type =
    OBJTYPE = TEMSE_OBJTYP
    EXCEPTIONS
    FB_ERROR = 1
    FB_RSTS_OTHER = 2
    NO_OBJECT = 3
    NO_PERMISSION = 4
    OTHERS = 5.
    STATUS = SY-SUBRC.
    ENDIF.
    IF STATUS = 0.
    CALL 'C_RSTS_OPEN_READ'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
    ID 'NAME' FIELD TEMSE_NAME
    ID 'PART' FIELD TEMSE_PART
    ID 'TYPE' FIELD TEMSE_OBJTYP
    ID 'CONV' FIELD ' '
    ID 'ALLINE' FIELD 'X'
    ID 'BINARY' FIELD ' '
    ID 'RECTYP' FIELD TEMSE_RECTYP
    ID 'CHARCO' FIELD TEMSE_CHARCO
    ID 'PROM' FIELD 'I'
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    ENDIF.
    ENDDO.
    IF STATUS = 4.
    STATUS = 12. "EOF
    ENDIF.
    IF STATUS = 8.
    STATUS = 40. "Line too long
    ENDIF.
    DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
    ENDFORM.
    FORM READ_DATA TABLES BUFFER
    USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
    VALUE(LAST) TYPE I.
    DATA: LINES TYPE I.
    REFRESH BUFFER.
    CLEAR IS_OTF.
    TEMSE_CLIENT = TSP01-RQCLIENT.
    TEMSE_NAME = TSP01-RQO1NAME.
    TEMSE_PART = 1.
    CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
    EXPORTING
    AUTHORITY = 'SP01'
    CLIENT = TEMSE_CLIENT
    NAME = TEMSE_NAME
    PART = TEMSE_PART
    IMPORTING
    CHARCO = TEMSE_CHARCO
    CREATER =
    CREDATE =
    DELDATE =
    MAX_CREDATE =
    MAX_DELDATE =
    NON_UNIQ =
    NOOF_PARTS =
    RECTYP = TEMSE_RECTYP
    SIZE =
    STOTYP =
    type =
    OBJTYPE = TEMSE_OBJTYP
    EXCEPTIONS
    FB_ERROR = 1
    FB_RSTS_OTHER = 2
    NO_OBJECT = 3
    NO_PERMISSION = 4
    OTHERS = 5.
    IF SY-SUBRC = 0.
    IF TEMSE_OBJTYP(3) = 'OTF'.
    IS_OTF = 'X'.
    ENDIF.
    ELSE.
    EXIT.
    ENDIF.
    CLEAR TEMSE_HANDLE.
    CALL 'C_RSTS_OPEN_READ'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
    ID 'NAME' FIELD TEMSE_NAME
    ID 'PART' FIELD TEMSE_PART
    ID 'TYPE' FIELD TEMSE_OBJTYP
    ID 'CONV' FIELD ' '
    ID 'ALLINE' FIELD 'X'
    ID 'BINARY' FIELD ' '
    ID 'RECTYP' FIELD TEMSE_RECTYP
    ID 'CHARCO' FIELD TEMSE_CHARCO
    ID 'PROM' FIELD 'I'
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    IF STATUS = 0.
    DO.
    PERFORM GET_SPOOL_LINE.
    IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
    PERFORM CLOSE_JOB.
    EXIT.
    ENDIF.
    IF STATUS <> 12. " 12 = End
    IF NOT ( DATA_SET_LENGTH IS INITIAL ).
    DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
    ENDIF.
    ADD 1 TO LINES.
    IF LINES >= FIRST.
    APPEND DATA_SET_LINE TO BUFFER.
    ENDIF.
    IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
    EXIT.
    ENDIF.
    ELSE.
    IF LINES = 0.
    PERFORM CLOSE_JOB.
    EXIT.
    ENDIF.
    IF LINES < FIRST .
    PERFORM CLOSE_JOB.
    EXIT.
    ENDIF.
    EXIT.
    ENDIF.
    ENDDO.
    PERFORM CLOSE_JOB.
    ENDIF.
    ENDFORM.
    FORM CLOSE_JOB *
    FORM CLOSE_JOB.
    IF STATUS <> 0 AND STATUS <> 12.
    CALL 'C_RSTS_CLOSE'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
    ENDIF.
    CALL 'C_RSTS_CLOSE'
    ID 'HANDLE' FIELD TEMSE_HANDLE
    ID 'RC' FIELD RC
    ID 'ERRMSG' FIELD ERRMSG.
    STATUS = SY-SUBRC.
    IF STATUS <> 0.
    MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
    ENDIF.
    ENDFORM.
    FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
    RQID LIKE TSP01-RQIDENT.
    DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
    LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
    V, V2.
    CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
    PERFORM SPOOLDATA_WRITE_INIT. "MODAB
    select single * from tspoptions where spoption = 'REALWIDTH'.
    if sy-subrc = 0.
    V = 'X'.
    endif.
    select single * from tspoptions where spoption = 'REALHEIGHT'.
    if sy-subrc = 0.
    V2 = 'X'.
    endif.
    IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
    GCOL = 0.
    GLINES = 0.
    SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
    AND PJNUMMER = 0.
    IF SY-SUBRC = 0.
    GCOL = TSP02L-COLUMNS.
    GLINES = TSP02L-LINES.
    ELSE.
    CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
    EXPORTING
    LAYOUT = RQPAPER
    IMPORTING
    ANSWER =
    COLUMNS = GCOL
    LINES = GLINES
    PFORMAT =
    ENDIF.
    ENDIF.
    IF GCOL < 80 OR V IS INITIAL.
    GCOL = 255.
    ENDIF.
    IF GLINES < 5 OR V2 IS INITIAL.
    GLINES = 0.
    ENDIF.
    IF GCOL >= 1024. "MODAB
    GCOL = 1023.
    ENDIF.
    NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
    LINE-COUNT GLINES. " make a wide list
    SET BLANK LINES ON.
    LOOP AT BUFFER.
    DATA_SET_LINE = BUFFER.
    IF DATA_SET_LINE-PRECOL = 'P'.
    IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
    NEW-PAGE.
    ENDIF.
    CONTINUE.
    ENDIF.
    Zeilenlange berechnen, falls unbekannt.
    IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
    LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
    ELSE.
    LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
    ENDIF.
    IF LINE_LENGTH > 0.
    LINE_LENGTH2 = LINE_LENGTH.
    PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
    LINE_LENGTH2
    1.
    ELSE.
    " Leerzeile
    SKIP.
    ENDIF.
    ENDLOOP.
    ENDFORM.
    copied from RSPO_SPOOLDATA_WRITE
    FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
    VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
    VALUE(START_POS) LIKE SY-COLNO.
    function globals
    DATA: LPOS LIKE SY-COLNO
    , REST_LEN TYPE I
    , AREA_LEN TYPE I
    , NEXT_HOT TYPE I " offset of next special character
    , COLS TYPE I " columns used by special character
    , BYTES TYPE I " bytes used by special character
    , HOT2
    , HOT3
    , HOT4
    , HOT5
    , HOT6
    , HOT7
    , BEGIN OF ESCAPE_TRICK
    , X1(1) TYPE X
    , END OF ESCAPE_TRICK
    , THE_PRTCTRL(5) TYPE C
    Because of a problem within the ABAP listprocessing, I shall
    never output the same icon side by side with the same color
    and without a gap.
    As I don't know the data, I will use two different variables
    alternatively.
    , ICON_ID1 LIKE ICONS-L4
    , ICON_ID2 LIKE ICONS-L4.
    FIELD-SYMBOLS: <LDATA>
    , <PLAIN_TEXT>
    , <PRTCTRL>
    , <HOT_PRTCTRL>
    , <HOT_FRAME>
    , <HOT_ICON>
    , <HOT_SYMBOL>
    IF START_POS < 2.
    write at / ' ' no-gap.
    NEW-LINE.
    LPOS = 1.
    ELSE.
    LPOS = START_POS.
    ENDIF.
    REST_LEN = STRLEN( SPOOL_DATA ).
    DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
    IF DATA_LENGTH = 0.
    " fine.
    ELSEIF DATA_LENGTH <= AREA_LEN.
    REST_LEN = DATA_LENGTH.
    ELSE.
    WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
    STOP.
    ENDIF.
    CHECK REST_LEN > 0.
    ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
    WHILE <LDATA> CA SPOC-FIRST_BYTES.
    NEXT_HOT = SY-FDPOS.
    IF NEXT_HOT > 0.
    ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
    MODAB
    PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
    NEXT_HOT
    LPOS.
    WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
    ADD NEXT_HOT TO LPOS.
    SUBTRACT NEXT_HOT FROM REST_LEN.
    ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
    ENDIF.
    IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
    ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
    ELSE.
    ASSIGN 'too_short' TO <HOT_PRTCTRL>.
    ENDIF.
    IF REST_LEN >= SPOC-FRAME_START_LENGTH.
    ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
    ELSE.
    ASSIGN 'too_short' TO <HOT_FRAME>.
    ENDIF.
    IF REST_LEN >= SPOC-ICON_START_LENGTH.
    ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
    ELSE.
    ASSIGN 'too_short' TO <HOT_ICON>.
    ENDIF.
    IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
    ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
    ELSE.
    ASSIGN 'too_short' TO <HOT_SYMBOL>.
    ENDIF.
    IF REST_LEN > 1.
    HOT2 = <LDATA>+1(1).
    IF REST_LEN > 2.
    HOT3 = <LDATA>+2(1).
    IF REST_LEN > 3.
    HOT4 = <LDATA>+3(1).
    ELSE.
    HOT4 = '?'.
    ENDIF.
    ELSE.
    HOT3 = '?'.
    ENDIF.
    ELSE.
    HOT2 = '?'.
    ENDIF.
    IF <HOT_FRAME> = <SPOC_FRAME>.
    COLS = 1. " in most cases.
    BYTES = 2. " in most cases.
    CASE HOT2.
    WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
    WHEN ';'. " box_drawings_light_left
    WRITE AT LPOS '4' AS LINE NO-GAP.
    WHEN '<'. " box_drawings_light_up
    WRITE AT LPOS '5' AS LINE NO-GAP.
    WHEN '='. " box_drawings_light_right
    WRITE AT LPOS '4' AS LINE NO-GAP.
    WHEN '>'. " box_drawings_light_down
    WRITE AT LPOS '5' AS LINE NO-GAP.
    WHEN '?'. " drawings_checkbox_off
    WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
    WHEN '@'. " drawings_checkbox_on
    WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
    WHEN OTHERS.
    BYTES = 0.
    ENDCASE.
    ENDIF.
    IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
    ESCAPE_TRICK = HOT3.
    SUBTRACT 32 FROM ESCAPE_TRICK-X1.
    IF HOT4 = SPACE.
    WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
    COLS = 2.
    BYTES = 4.
    ELSE.
    WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
    BYTES = 3.
    ENDIF.
    ENDIF.
    IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
    ESCAPE_TRICK = HOT3.
    ADD 32 TO ESCAPE_TRICK-X1.
    IF HOT4 = SPACE.
    WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
    COLS = 2.
    BYTES = 4.
    ELSE.
    WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
    BYTES = 3.
    ENDIF.
    ENDIF.
    IF <HOT_ICON> = <SPOC_ICON>.
    IF SPOC-ICON_SEL >< 1.
    SPOC-ICON_SEL = 1.
    ICON_ID1 = '@00@'.
    ICON_ID1+1(1) = HOT3.
    ICON_ID1+2(1) = HOT4.
    ELSE.
    SPOC-ICON_SEL = 2.
    ICON_ID2 = '@00@'.
    ICON_ID2+1(1) = HOT3.
    ICON_ID2+2(1) = HOT4.
    ENDIF.
    IF REST_LEN > 4.
    HOT5 = <LDATA>+4(1).
    IF REST_LEN > 5.
    HOT6 = <LDATA>+5(1).
    IF REST_LEN > 6.
    HOT7 = <LDATA>+6(1).
    ELSE.
    HOT7 = '?'.
    ENDIF.
    ELSE.
    HOT6 = '?'.
    ENDIF.
    ELSE.
    HOT5 = '?'.
    ENDIF.
    IF HOT5 = SPACE.
    IF HOT6 = SPACE.
    IF HOT7 = SPACE.
    IF SPOC-ICON_SEL = 1.
    WRITE AT LPOS(4) ICON_ID1 AS ICON.
    write at lpos icon_id1 as icon no-gap.
    ELSE.
    WRITE AT LPOS(4) ICON_ID2 AS ICON.
    write at lpos icon_id2 as icon no-gap.
    ENDIF.
    COLS = 4.
    BYTES = 7.
    ELSE.
    IF SPOC-ICON_SEL = 1.
    WRITE AT LPOS(3) ICON_ID1 AS ICON.
    write at lpos icon_id1 as icon no-gap.
    ELSE.
    WRITE AT LPOS(3) ICON_ID2 AS ICON.
    write at lpos icon_id2 as icon no-gap.
    ENDIF.
    COLS = 3.
    BYTES = 6.
    ENDIF.
    ELSE.
    IF SPOC-ICON_SEL = 1.
    WRITE AT LPOS(2) ICON_ID1 AS ICON.
    write at lpos icon_id1 as icon no-gap.
    ELSE.
    WRITE AT LPOS(2) ICON_ID2 AS ICON.
    write at lpos icon_id2 as icon no-gap.
    ENDIF.
    COLS = 2.
    BYTES = 5.
    ENDIF.
    ELSE.
    "rite at lpos(1) icon_id as icon.
    WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
    COLS = 1.
    BYTES = 4.
    ENDIF.
    ENDIF.
    IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
    COLS = 0. " in most cases.
    BYTES = 6. " in most cases.
    IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
    THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
    IF THE_PRTCTRL = 'SABLD'.
    FORMAT INTENSIFIED ON.
    "no 3.0 'SAULN'.
    "no 3.0 FORMAT UNDERSCORED ON.
    ELSEIF THE_PRTCTRL = 'SAOFF'.
    FORMAT INTENSIFIED OFF.
    "no 3.0 FORMAT UNDERSCORED OFF.
    ELSEIF THE_PRTCTRL(3) = 'COL'.
    CASE THE_PRTCTRL+3(1).
    WHEN '0'.
    FORMAT COLOR OFF.
    WHEN '1'.
    FORMAT COLOR 1.
    WHEN '2'.
    FORMAT COLOR 2.
    WHEN '3'.
    FORMAT COLOR 3.
    WHEN '4'.
    FORMAT COLOR 4.
    WHEN '5'.
    FORMAT COLOR 5.
    WHEN '6'.
    FORMAT COLOR 6.
    WHEN '7'.
    FORMAT COLOR 7.
    ENDCASE.
    CASE THE_PRTCTRL+4(1).
    WHEN 'N'.
    FORMAT INTENSIFIED OFF INVERSE OFF.
    WHEN 'H'.
    FORMAT INTENSIFIED ON INVERSE OFF.
    WHEN 'V'.
    FORMAT INTENSIFIED ON INVERSE ON.
    ENDCASE.
    ENDIF. "printcontrol
    ELSE. "??
    ENDIF.
    ENDIF.
    IF BYTES = 0.
    BYTES = 1.
    WRITE AT LPOS(1) '#'.
    COLS = 1.
    ENDIF.
    ADD COLS TO LPOS.
    SUBTRACT BYTES FROM REST_LEN.
    IF REST_LEN > 0.
    ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
    ELSE.
    EXIT.
    ENDIF.
    ENDWHILE.
    MODAB
    IF REST_LEN > 0.
    ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
    PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
    REST_LEN
    LPOS.
    ENDIF.
    ENDFORM.
    FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
    VALUE(LEN)
    VALUE(POS).
    FIELD-SYMBOLS <P>.
    DATA: CHUNK TYPE I.
    WHILE LEN > 0.
    IF LEN > 255.
    CHUNK = 255.
    ELSE.
    CHUNK = LEN.
    ENDIF.
    WRITE AT POS FIELD(CHUNK) NO-GAP.
    ADD CHUNK TO POS.
    LEN = LEN - CHUNK.
    IF LEN > 0.
    FIELD = FIELD+CHUNK.
    ENDIF.
    ENDWHILE.
    ENDFORM.
    FORM SPOOLDATA_WRITE_INIT.
    DATA: BEGIN OF ESCAPE_TRICK
    , X1(1) TYPE X
    , END OF ESCAPE_TRICK
    FIELD-SYMBOLS: <LDATA>
    , <PLAIN_TEXT>
    , <PRTCTRL>
    ESCAPE_TRICK-X1 = '1C'.
    SPOC-PRTCTRL_START = ESCAPE_TRICK.
    SPOC-PRTCTRL_START_LENGTH = 1.
    SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
    ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
    ESCAPE_TRICK-X1 = '1B'.
    SPOC-FRAME_START = ESCAPE_TRICK.
    SPOC-FRAME_START_LENGTH = 1.
    ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
    ESCAPE_TRICK-X1 = '1B'.
    SPOC-ICON_START = ESCAPE_TRICK.
    SPOC-ICON_START+1 = ','.
    SPOC-ICON_START_LENGTH = 2.
    ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
    ESCAPE_TRICK-X1 = '1B'.
    SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
    SPOC-SYMBOL_LOW_START+1 = '('.
    SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
    SPOC-SYMBOL_HGH_START+1 = ')'.
    SPOC-SYMBOL_START_LENGTH = 2.
    ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
    TO <SPOC_SYMBOL_LOW>.
    ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
    TO <SPOC_SYMBOL_HGH>.
    SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
    SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
    SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
    SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
    ENDFORM.

  • Spool list in background

    Hii everybody,
    I am not able to generate the background spool list for this report. When executed in background, the job shows successful execution, but when I see spool status, it shows waiting and the spool has incomplete list. The bottom part of the spool list has all vertical lines... Any guesses what might be the problem? I am able to see the output when report ran in foreground. It is an ALV grid report.
    PLese reply me fast as it is urgent.
    M A

    Hope you have end spool writing with  new-page print off.
    form write_to_spool.
      data : l_params        type pri_params,          "new spool params
               l_destination type pri_params-pdest value 'LOCL'.      "printer name
    *Get the print parameters.
      call function 'GET_PRINT_PARAMETERS'
        EXPORTING
          copies                 = 1
          department             = 'SYSTEM'
          destination            = l_destination
          expiration             = 2
          immediately            = ' '
          layout                 = 'X_65_255'
          line_count             = 65
          line_size              = 255
          list_name              = 'XYZ'
          list_text              = 'ABC'
          mode                   = ' '
          new_list_id            = 'X'
          no_dialog              = 'X'
          receiver               = 'SAP*'
          release                = 'X'
          sap_cover_page         = 'X'
          user                   = sy-uname
        IMPORTING
          out_parameters         = l_params
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          others                 = 4.
      case sy-subrc.
        when 1.
          raise get_print_info_not_found.
        when 2.
          raise get_print_invalid_prt_params.
        when 3.
          raise get_print_invalid_arch_params.
        when 4.
          raise get_print_others.
      endcase.
    *start spool writing.
      new-page print on parameters l_params no dialog.
      uline.
      skip.
    write  your contents
      uline.
    *end spool writing.
      new-page print off.
    endform.                    " write_to_spool

  • Adding Spool List recipient

    Hi Team,
    When setting up a user to receive emailed reports the "Spool List Recipent" is not retaining the email addres
    It is saved as part of the SM36 set up. But when going back to check in SM37 the error is No Spool List recipient.
    Could you please help me on this.
    Regards
    Raghu

    Thanks for your valuable suggestions
    Furtherance all the reports printed to a particular printer. But few of the customers didn’t receive those reports. Even though I didn’t set them to print, but still we are getting prints. We set them only to receive mails.
    In the successful job log I found “Error sending data (2)” Message no. PO780
    Laurie , did u face this issue in your tricky. Does all this issues may helpful in this note 1810625
    I really appreciate your help in advance
    Regards
    Raghu

  • Jobs stay in queue and keep printing until you cancel them--then stops the print spooler...why?

    My Printer: HP Photosmart C309a
    My  Laptop: HP G71 series
    Operating System: Windows 7 (64 bit) but runs a lot of stuff on 32 bit
    Problem: I print ONE copy of a multiple page document in Adobe Reader 9. I select even pages only (after which I would reinsert the pages and tell it to print odd pages only, to get the other side). The printer makes a sound indicating the job is finished, I remove my pages to collate them, and then the printer continues to print the job again without so much as a keystroke.
    Naturally, you find the printer in the devices on the control panel, click "see what's printing" and highlight the job and cancel it.
    Then somehow it turns off my print spooler. 
    I have tried everything suggested on other forums, like
    restart the laptop/restart the printer
    going to c\windows\system32\spool\printers and deleting whatever is hung up in there (usually a shockwave file).
    Going to Services\print spooler \properties and making sure the settings are set to automatic
    Uninstall\reinstall latest driver and software
    Switching from Adobe Reader 10 to Adobe Reader 9
    Use System Restore to try to reset the system to a previous state.
    Run Trend Micro to check for viruses and spyware--nothing shows up.
    I am positive the pdf doc is NOT the problem, because I can print it on my husband's laptop multiple times over with no problems.
    Does anyone have this problem as well? Has anyone found a genuine solution other than manually canceling print jobs in queue and constantly restarting the print spooler?
    Thanks in advance for any suggestions.
    --Holly

    Hi,
     I believe your printer is wirelessly connected to your computer, right?!
     What's the current printer software version installed in your laptop computer?! 
     to see: click start>control panel>uninstall a program under Programs then it will tell you the software version like HP Photosmart c309a v13 or v14.
    If the software version is v13, click here to download and install the current software.
    IF all things still fail, try to use the workaround provided by HP in this link. It says:
    Workaround
    Your HP printing product can operate sufficiently using an alternate print driver, although there might be some limitations. For instance, some buttons on the product control panel might not function, but the product prints normally from the computer. If the solutions in this document do not solve the issue, download and install an alternate print driver.
    Follow these steps to install the HP Deskjet 990C print driver.
      NOTE:  These steps install the new print driver using the same port that the product already uses. The product functions normally with multiple drivers on the same port.
    Find the port that the product already uses.
    Click the Windows icon ( ), and then click Control Panel . The Control Panel opens in a new window.
    Click Hardware and Sounds .
    Click Printers . The Printers folder opens.
    Right-click the product icon ( ), and then click Properties . The Propertieswindow opens.
    Click the Ports tab. A window opens with a list of ports. The port for the product has a checkmark or a highlight.
    Note the name of the port indicated for the product.
    Close the Properties window, and then continue with the next steps.
    Click Add a Printer in the menu bar at the top of the Printers window. The Windows Add Printer Wizard opens.
    Click Add a local printer .
    Select Use an existing Port .
    Click the drop-down menu next to Use an existing Port , and then select the port that you noted earlier in these steps.
    Click Next .
    In the Manufacturer pane, click HP .
    In the Printers pane, click HP Deskjet 990c , and then click Next . (IF YOU CANT FIND DESKJET 990C, JUST CLICK WINDOWS UPDATE WITHIN THIS WINDOW. THEN FIND DESKJET 990C and then click next)
    Type a name for the new printer in the Printer name box, or keep the default name.
    Select Set as the default printer , and then click Next . A window opens with a progress bar as the printer installs. Then a new window opens.
    Click Do not share this printer , and then click Next .
    If you want to print a test page, click the Print test page button.
    Click Finish to complete the driver installation.
    Try printing again, but select HP Deskjet 990c from the Print dialog box.
    If this solves the issue, follow these steps to use the HP Deskjet 990c print driver whenever you send print jobs to the product.
    In the program you are using, select the option to print. The Print dialog box opens.
    Click the Name drop-down menu, and then select HP Deskjet 990c .
    Change print settings as desired in the Paper size , Quality , and Paper type drop-down menus.
    Select the Print range and Copies options as desired.
    Click OK . The product prints the file.
    Kiko

  • How do i get a print spooler for office jet 6500 E709n

    somehow my print spooler is gone how do i get another, i have run the install, diagnostic and utility and none fix the problem. I can see the printer in my wireless network but can't print to it
    This question was solved.
    View Solution.

    If your PRINT SPOOLER IS "GONE", you may have to contact WINDOWS for this issue. I would like to double check first though.
    What operating system are you using? If windows 7 or XP, do the following:
    1. Click Start Menu
    2. RIGHT-click computer
    3. Choose MANAGE
    4. Click Services and Applications
    5. Choose Services
    6. Scroll down until you see PRINTER SPOOLER, if it is there, click on it, and START it
    IF you DO NOT SEE IT IN THAT LIST, you will have to contact WINDOWS, because you may have to reformat your operating system, but contact them first.
    Let me know if this helps, thanks.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Maybe you are looking for