Cheque printing error Restart number is not in the check file
Dear Sap friends,
I need to print the cheque using the standard program FBZ5. Since the client requires to change the description of vendor i am using FCH5 and manually creating the cheque for the payment document number.
After the cheque no is attached to this document number i go to FBZ5 and am entering this docuemnt number for printing the cheque.
Initially i am getting the error
You cannot print the manually created check AX002 AX002 500000
Message no. FS675.
This i have resovled by changing the message from error to warning.
Later when i press enter i am getting the following error.
Restart number is not in the check file or is not a From-number
Message no. FS562
How to i resolve this.
Please help.
Satish
Exactly,
If you really need such kind of facility, ask your ABAPER to develop a small report like below
Selection criteria
Document number - BELNR
Conmpany code - BUKRS
Fiscal year - GJAHR
Output criteria
Vendor name
Amount
Date
Form has to develop for Check prinitng
Thanks
Similar Messages
-
Restart number is not in the check file or is not a From-number
HI!
I had posted payment Document but i got below error while reprint check from FBZ5
Restart number is not in the check file or is not a From-number
"Message no. FS562"
on that base, I had check below settinng
1) I had check Cheque no register . It's proper in series.
2)Tcd:FBZP -> Pmt methods in country -> select your country
and payment method 'C'. If 'Bank details' is checked on, then bank
details of vendor master is mandatory for that payment.
Awaiting for reply soon,
thanking you,
Rupang shahHi,
Commonly it will come for below situations:
1. Client decided to use this check lots for manual payment & this checks already used, so this type of checks system not allowed to take reprint.
2. You can only reprint checks created with F110, FBZ4, F-58 or FBZ5 (this checks have been printed by the system)
Check the Payment method wise checks it is already issued / not PAYR - RZAWE
system not allowed to reprint already exist in PAYR table checks.
if you already use one check with payment method C now you want to use the same lot for payment method X then system not allow to print.
Regards,
Viswa -
whenever I try to install an addon, firefox says it can not install the addon since it can not modify the needed file! Whatever addon I have are from my previous version of firefox.
Is the date / time set correctly on that PC? <br />
Right-click the Time in the System Tray and select Adjust Date / Time to see. -
Error 2519 LabVIEW could not load the TDMS file component
Hi there,
I have LabVIEW 2014 for Linux, and have successfully installed it on OpenSUSE 13.1 with no issues.
The problem I am seeing is with TDMS, I have placed down and "Open TDMS" followed by "close TDMS" provided it my file path to my TMDS File and I see the following error:
I have searched NI.com and google, and what I keep finding is the problem with cRIO. I am running a desktop version of Linux as mentioned above.
Any help or advise would be greatly appreciated.
Many thanks
Kevin
Solved!
Go to Solution.Hey
Thanks for getting in touch with me. I can confirm I have the TDMS components installed and in the correct location.
I will try to reinstall my LabVIEW and see if that helps.
I have two systems that both are running the same version of Linux and I have the same issue on both systems. One is a physical system the other is a virtual machine replicating the physical system.
Many Thanks -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Multiple "slapd[46]: could not load the replica file" Errors
Hi,
We've got an OD master (10.4.8) that sporadically falls into a state where it reports the error "slapd[46]: could not load the replica file." many times over in the system log. It will start this with no warning and when everything is running just fine, but once it has started there errors build up until it is reporting them up to 20 times a second. Usually once it gets to this stage directory services start to suffer badly across the network and all connected servers. We usually have to reboot various servers at this point including the ODM in order to get services up and running again. After the reboots sometimes the problem will just disappear, sometimes it will just start building up again.
We only have one other replica (down from 4) which is on a separate subnet across a WAN. We managed to get rid of the problem for a while by getting rid of the replicas on the local subnet, but it just pops back up again for no apparent reason.
We attempted to install a new ODM with a brand spanking PW server a while ago and new replicas, but hit the same issue sometime into the install.
The only time I've ever seen an issue with this many errors being reported so often it turned out to be a network loop, but I know there is not one present now. I did wonder about a rogue device on the network causing issues but I'm not fixed on this.
Can anyone give me any ideas where to start looking for a resolution?
Cheers
DanStep 1: Download subinacl.msi from the link
http://go.microsoft.com/fwlink/?LinkId=23418 and install it.
Step 2: Download my modified version of reset.cmd from
http://gerger.com/o/assets/x/?id=22540 and save the file in 'C:\Program
Files\Windows Resource Kits\Tools'.
Step 3: Open Command Prompt as Administrator and type the following without
quotes (hit Enter):
'cd c:\program files\windows resource kits\tools'
Step 4: Now type 'reset.cmd' and hit Enter (without quotes)
You will see the Command Line Tool running for some seconds. The issue
should have been fixed and Quicktime should run again.
Enjoy! -
Error Message: Number is not in external Interval (Testing Schedule)
Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AMHi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle -
Serial Activation Error "Serial Number is not Valid for this Product"
I have Photshop CS5 Extended edition but when i try to activate the key it comes with the error "Serial Number is not valid for this product". The product has been activated two times before but the installation doesnt come with the error "Serial Number is already in use" or something similar. Any ideas on how to fix this?
Hi Dynamikzz,
As per the error message you received "Serial Number is not valid for this product", please follow the help document as below:
Error "The serial number is not valid for this product" | Creative Suite
In case you have received the error message "Serial Number is already in use", please follow the thread below as the activation count of Adobe CS5 applications is 2 :
Re: serial number issue
Regards,
Sheena -
I can receive messages but cannot sent. I get an error that number is not registered
I am unable to send messages. I can receive but not send. Each time I attempt to send I get an error stating number is not regisered
Then that means that the user that you are trying to reach has not setup and registered Messages on their iDevice. They have to set it up first before you can reach them. And you can only message with other iOS users, not with Android devices or other cell phones.
-
Question about finding whether a reference number is NOT in the database?
Hello,
I use the following code to test whether the reference number is in the database
<ul><li>CURSOR cur_yellow</li></ul>
<ul><li>IS SELECT</li></ul>
<ul><li>REFERENCE_NO,</li></ul>
<ul><li>COMPANY_NAME</li></ul>
<ul><li>FROM CONSULTANTS;</li></ul>
<ul><li>rec_yellow cur_yellow%ROWTYPE;</li></ul>
<ul><li>BEGIN</li></ul>
<ul><li> OPEN cur_yellow;</li></ul>
<ul><li> LOOP</li></ul>
<ul><li> FETCH cur_yellow INTO rec_yellow;</li></ul>
<ul><li> EXIT WHEN cur_yellow%NOTFOUND;</li></ul>
<ul><li> IF ref_no = rec_yellow.REFERENCE_NO</li></ul>
<ul><li> THEN</li></ul>
HTP.print ('<ul><li><span class="style5">The information concerning the consultant selected has been deleted from the database.</span></li></ul>');
<ul><li> exp := 1; -- used to make code bullet proof</li></ul>
<ul><li> END IF;</li></ul>
<ul><li> END LOOP;</li></ul>
<ul><li> CLOSE cur_yellow;</li></ul>
Do you have any ideas for how to write code to test whether the reference number is NOT in the database.
Thanks
DougHallo,
in general, yes, but I think , it will be better without cursor:
declare
v_dummy number;
BEGIN
EXECUTE IMMEDIATE 'select 1 from dual where
exists (select 1 from user_indexes where index_name = : ind_name) USING ''DOUGLASMYINDEX'
INTO v_1;
-- something
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
Is it necessary to perform it in dynamic SQL ?
declare
v_dummy number;
BEGIN
select 1 into v_1 from dual where
exists (select 1 from user_indexes where index_name = ''DOUGLASMYINDEX''')
INTO v_1;
-- something
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
Regards
Dmytro Dekhtyaryuk -
IDOC number is not in the list
Hi,
I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
LalynHi Arun,
Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
Lalyn -
ERROR: exception symbol "09732" not found in resource file
I am trying to get a client to work with workflow services. I get 'ERROR: exception symbol "09732" not found in resource file' in the output when the method queryTasks is excecuted.
Jdeveloper 10.1.3.4 and SOA Suite 10.1.3.3.0
Any ideas?
Eydun
------------------ program ---------------------
package project1;
//import com.oracle.services.bpel.task.Task;
import java.util.ArrayList;
import oracle.bpel.services.workflow.client.IWorkflowServiceClient;
import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory;
import oracle.bpel.services.workflow.query.ITaskQueryService;
import oracle.bpel.services.workflow.verification.IWorkflowContext;
import java.util.List;
import oracle.bpel.services.workflow.repos.Ordering;
import oracle.bpel.services.workflow.repos.Predicate;
import oracle.bpel.services.workflow.repos.TableConstants;
import oracle.bpel.services.workflow.task.ITaskService;
import oracle.bpel.services.workflow.task.model.Task;
public class Class1 {
public Class1() {
public void TryTask() {
try {
//Create JAVA WorflowServiceClient
IWorkflowServiceClient wfSvcClient =
WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.WSIF_CLIENT);
//Get the task query service
ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
//Login as jstein
IWorkflowContext ctx = querySvc.authenticate("jstein",
"welcome1",
null, //Use default realm
null);//Not logging in on behalf of another user
//Set up list of columns to query
List queryColumns = new ArrayList();
queryColumns.add("TASKID");
queryColumns.add("TASKNUMBER");
queryColumns.add("TITLE");
queryColumns.add("OUTCOME");
//Create a predicate to query tasks that have a null outcome
String outcome = null;
Predicate predicate = new Predicate(TableConstants.WFTASK_OUTCOME_COLUMN,
Predicate.OP_EQ,
outcome);
//Create an ordering to order tasks by task number
Ordering ordering = new Ordering(TableConstants.WFTASK_TASKNUMBER_COLUMN
,true //Ascending order
,false //Nulls last
//Query a list of tasks assigned to jstein
List tasks = querySvc.queryTasks(ctx,
queryColumns,
null, //Do not query additional info
ITaskQueryService.ASSIGNMENT_FILTER_MY,
null, //No keywords
null, //predicate, //Only tasks with no outome set
ordering, //Order by ascending task number
0, //Do not page the query result
0);
//Get the task service
ITaskService taskSvc = wfSvcClient.getTaskService();
//Loop over the tasks, outputting task information, and approving tasks
for(int i = 0 ; i < tasks.size() ; i ++)
Task task = (Task)tasks.get(i);
int taskNumber = task.getSystemAttributes().getTaskNumber();
String title = task.getTitle();
String taskId = task.getSystemAttributes().getTaskId();
//Set the outcome
taskSvc.updateTaskOutcome(ctx,taskId,"APPROVED");
System.out.println("Task #"+taskNumber+" ("+title+") is APPROVED");
catch (Exception e)
//Handle any exceptions raised here...
System.out.println("Caught workflow exception: "+e.getMessage());
public static void main(String[] args) {
Class1 class1 = new Class1();
class1.TryTask();
------------------- output ---------------------
C:\java\jdk1.6.0_07\bin\javaw.exe -client -classpath C:\jdev11work\eej\mywork\Application3\Project1\classes;C:\oracle\jdev10134bpellibs\bpel\lib\bpm-infra.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-common.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-thirdparty.jar;C:\oracle\jdev10134bpellibs\j2ee\home\jazncore.jar;C:\oracle\jdev10134bpellibs\j2ee\home\oc4jclient.jar;C:\oracle\jdev10134bpellibs\lib\xml.jar;C:\oracle\jdev10134bpellibs\lib\xmlparserv2.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\config;C:\oracle\jdev10134bpellibs\webservices\lib\orasaaj.jar;C:\oracle\jdev10134bpellibs\webservices\lib\soap.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\lib\bpm-services.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\schema;C:\oracle\jdev10134bpellibs\bpel\lib\olite40.jar;C:\oracle\jdev10134bpellibs\jdbc\lib\ojdbc14.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel.jar;C:\oracle\jdev10134bpellibs\wsclient_extended.jar project1.Class1
<::> WorkflowService:: TaskQueryService.authenticate(): called. user = jstein identityContext = null onBehalfOfUser = null
<::> WorkflowService:: VerificationService.authenticateUser: attempting for user = jstein identityContext = null
<ISConfiguration::load> Found Configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::load> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::load>
<ISConfiguration::validate> Validate configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::validate> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::validate>
<ISConfiguration::save> Save IdentityService configuration file into /C:/oracle/jdev10134bpellibs/bpel/system/services/config/is_config.xml
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: begin
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: call authenticate
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: user is authenticated!
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: end
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLIdentityService::init> Load provider initialization complete
<XMLAuthenticationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMIdentityImpl::getActions> BPMIdentityImpl::getActions()
<BPMIdentityImpl::getAllGrantedRealmRoles> Identity has the following granted realmRoles=[RealmRole: BPMWorkflowReassign, RealmRole: BPMWorkflowSuspend, RealmRole: BPMAnalyst]
<RoleProperties::load> Resource oracle/tip/pc/services/identity/role.properties is loaded, s_properties={BPMWorkflowSuspend=SUSPEND,RESUME, BPMWorkflowAdmin=ADMIN, BPMWorkflowReassign=REASSIGN, BPMPublic=VIEW_WORK_LIST,ACQUIRE,WITHDRAW,ESCALATE,ERROR,PUSH_BACK,RENEW,RELEASE,REQUEST_INFO,SUBMIT_INFO,CUSTOM,VIEW_TASK_HISTORY,VIEW_SUB_TASKS,UPDATE,ADHOC_ROUTE,OUTCOME_UPDATE_ROUTE, BPMSystemAdmin=, BPMWorkflowViewHistory=VIEW_TASK_HISTORY,VIEW_PROCESS_HISTORY, BPMAnalyst=VIEW_REPORTS}
<BPMIdentityImpl::getActions> Identity has the following roles:[BPMWorkflowReassign, BPMWorkflowSuspend, BPMAnalyst]
<BPMIdentityImpl::getActions> Role: BPMWorkflowReassign
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, REASSIGN]
<BPMIdentityImpl::getActions> Role: BPMWorkflowSuspend
<BPMIdentityImpl::getActions> Actions: [RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE]
<BPMIdentityImpl::getActions> Role: BPMAnalyst
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, VIEW_REPORTS]
<BPMIdentityImpl::getActions> Identity has the following actions:[RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, RENEW, ADHOC_ROUTE, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, VIEW_WORK_LIST, ERROR, ESCALATE, RELEASE, REASSIGN, VIEW_REPORTS]
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: VerificationService.authenticateUser: successful for user = jstein identityContext = null
<::> WorkflowService:: TaskQueryService.authenticate(): completed. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ==
<::> VerificationService.createWorkflowContext: Request NOT authenticated by WS-Security framework
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: TaskQueryService.queryTasks(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein displayColumns = TASKID, TASKNUMBER, TITLE, OUTCOME optionalInformation = assignmentFilter = My keywords = null predicate = null ordering = wfn.taskNumber ASC startRow = 0 endRow = 0
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My keywords = null predicate = null
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): completed. assignmentFilterPred = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): completed. combinedPredicate = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
ERROR: exception symbol "09732" not found in resource file.
<::> ORABPEL-09732
<::>
<::>
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:231)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
<::> at project1.Class1.TryTask(Class1.java:55)
<::> at project1.Class1.main(Class1.java:91)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
<::> ... 7 more
<2008-10-14 23:59:00,952> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
at project1.Class1.TryTask(Class1.java:55)
at project1.Class1.main(Class1.java:91)
Caught workflow exception:
Process exited with exit code 0.Although the versions 10.1.3.4 and 10.1.3.3 are close and should be able to use 10.1.3.4 JDev for most 10.1.3.3 development, the human tasks is the one exception. 10.1.3.3 had a few bugs fixed therefore the jar file used in JDev 10.1.3.4 may not be compatible with 10.1.3.3.
I would either use JDev 10.1.3.3 or upgrade SOA Suite to 10.1.3.4
cheers
James -
ERROR: exception symbol "20001" not found in resource file.
HI,
I am trying to use the Java API to create and update Work Tasks. When I setup a situation where two users edit and update the same work task I get an exception as follows.
07/03/02 09:58:51 ERROR: exception symbol "20001" not found in resource file.
07/03/02 09:58:51 a042d39669c482aa:-6ee930c2:1110a6f1a2f:-7a06
<2007-03-02 09:58:51,453> <ERROR> <oracle.bpel.services> <::>
ORABPEL-20001
at oracle.bpel.services.workflow.repos.driver.olite.OliteWFTask.lockTask(OliteWFTask.java:425)
at oracle.bpel.services.workflow.repos.driver.olite.OliteWFTask.updateWFTask(OliteWFTask.java:259)
at oracle.bpel.services.workflow.repos.driver.PersistencyService.updateWFTask(PersistencyService.java:434)
at oracle.bpel.services.workflow.task.impl.TaskService.performPostActionOperation(TaskService.java:2958)
at oracle.bpel.services.workflow.task.impl.TaskService.performPostActionOperation(TaskService.java:2805)
at oracle.bpel.services.workflow.task.impl.TaskService.performPostActionOperation(TaskService.java:2780)
at oracle.bpel.services.workflow.task.impl.TaskService.updateTask(TaskService.java:492)
at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.updateTask(TaskServiceBean.java:135)
<<<snip>>>
Digging away and doing a bit more debugging indicates that the exception is due to not being able to load a Resource file...
07/03/02 09:58:51 Got Throwable : - java.lang.ExceptionInInitializerError, null
07/03/02 09:58:51 java.lang.ExceptionInInitializerError
07/03/02 09:58:51 at com.evermind.server.rmi.RMICall.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMICall.java:109)
07/03/02 09:58:51 at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:125)
07/03/02 09:58:51 at com.evermind.server.rmi.RMIClientConnection.obtainRemoteMethodResponse(RMIClientConnection.java:517)
07/03/02 09:58:51 at com.evermind.server.rmi.RMIClientConnection.invokeMethod(RMIClientConnection.java:461)
07/03/02 09:58:51 at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:63)
<<<snip>>>
...and...
07/03/02 09:58:51 Caused by: java.util.MissingResourceException: Can't find bundle for base name com.collaxa.cube.i18n.exception_cube, locale en
07/03/02 09:58:51 at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:836)
07/03/02 09:58:51 at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:726)
07/03/02 09:58:51 at java.util.ResourceBundle.getBundle(ResourceBundle.java:699)
07/03/02 09:58:51 at com.collaxa.cube.CubeException.getResourceBundle(CubeException.java:142)
07/03/02 09:58:51 at com.collaxa.cube.CubeException.<clinit>(CubeException.java:82)
07/03/02 09:58:51 at java.lang.Class.forName0(Native Method)
07/03/02 09:58:51 at java.lang.Class.forName(Class.java:242)
07/03/02 09:58:51 at com.evermind.io.ClassLoaderObjectInputStream.resolveClass(ClassLoaderObjectInputStream.java:33)
07/03/02 09:58:51 at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1538)
07/03/02 09:58:51 at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
07/03/02 09:58:51 at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1693)
07/03/02 09:58:51 at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
07/03/02 09:58:51 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)
07/03/02 09:58:51 at com.evermind.server.rmi.RMIClientConnection.handleMethodInvocationResponse(RMIClientConnection.java:856)
Digging through the classes gives me a pretty good guess that the missing resource is in "orabpel.jar" which is on the classpath and in the class exception_cube_bpeltest.java.
"exception.20001.severity", "10"
"exception.20001.type", "error"
"exception.20001.name", "Assertion execution error."
"exception.20001.description", "A problem occurred while converting the assertion value \"{0}\" to a number at activity \"{1}\"."
"exception.20001.fix", "Please change the value to be a number or do a string comparison."
What I'm looking for is the nicely formatted exception to come back from Oracle so that I can wrap it up in our own exception handling and deal with the situation nicely. Instead of a java.lang.ExceptionInInitializerError - I think I'm supposed to be getting a proper "ORABPEL-20001" exception.
I suspect it's got something to do with classpath. But I've checked that orabpel.jar is on the classpath.
Please help :-)
- Richard Perfect.I think it is a classloader related problem. I had the same situation when updating BPEL Tasks from a custom web application using REMOTE_CLIENT (RMI) method. I have no clue which classloader loads which class so I choosed a simple workaround: extracted the com.collaxa.cube.i18n folder and its contents from orabpel.jar into the oc4j container's applib directory. This way every classloader can find the resource files. (Do not copy the orabpel.jar into applib. It causes other classloader related dependency problems. Copy only the resource files.)
-
Windows error message "Setup could not read the CD you inserted..."
I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?
Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.
-
Printing Error: There is a problem with a font file.
I get this error when I try to print:
"Printing Error: There is a problem with a font file."
I tried exporting to PDF and printing from there. I get this message:
"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Has anyone encountered this problem?You may have a corrupted font. Try substituting fonts to see which one is the problem.
Maybe you are looking for
-
How do I set the charset in robohelp?
I have to edit a Polish help file but Robohelp change the charset of every topic I edit from charset=windows-1250 to charset=windows-1252 Resulting in the Polish characters not being displayed properly. charset=windows-1250 is for Belarusian, Croatia
-
Iphoto 6 "photo cannot be found,etc.
Somehow about 300+ of my 3400 photos now have been lost except for the thumbnails that have been degraded from 2272 X 1704 pixels down to 1/4 of that. They can only be viewed in Preview - can't e-mail or anything else either. I kept getting the msg.
-
Hi, I am using LV 7.1.1 with FPGA-Modul 1.1. Last week, I started to get DRC warnings in the compiler-log: Running DRC. mytop_n_133762400_resVI_n_139936640_uut/B5 is not connected. mytop_n_133762400_resVI_n_139936640_uut/B5 is not connected. mytop_n_
-
Until recently I had not visited the iWeb forum for a long time. I see that so many of you are having publishing problems. Most of these seem to be about publishing to .Mac. I do have a .Mac account but I use it for Backup, Address Book etc and to tr
-
Table of Contents -- Removing the Duration at the bottom
Hi I was wondering if it is possible to remove the duration at the bottom of the table of contents? I checked off the show duration box in the settings but that only removes the duration for each individual slide. Is it also possible to edit the heig