Cheque Printing Spool Issues

Dear Experts,
After doing payment run through F110 and used the functionality of printing of the cheques through F110 only.
Its created spool request of cheques.
After printing the cheques the spool is not getting deleted immediately.
In the properties of Spool, Delete after printing if no errors is active and in the field Deleted on is showing the future date (8 days from the date of spool generated)
The spool must get deleted immediately after printing.
Kindly advice.
Uttam

This is taken care by Basis team.
They will give the settings in spool administartion, according to that setting if system reaches to certain limit of spools, they 'll delete automatically(old spools)
Rgds
Murali. N

Similar Messages

Printer spool issue with HP LaserJet 1018

I seem to be having a recurring problem with the HP LaserJet 1018 that I am hoping someone has also had and can help me resolve. When I go to print I get a message that I need to set up a printer (it does not recognize the printer is there). When I click on set up a new printer, I receive a message that the local print spooler service is not running. Nothing I do seems to solve the problem.
This happened to me with my previous 1018 printer. The exact same thing. I had a second 1018 available to me that I connected and it worked just fine for about two months and now is doing the same thing as the first.
I have an HP Pavilion Entertainment PC with Windows 7 (64 bit) operating system. I previously had a Dell with Windows XP that the first printer worked on for a long time (maybe 2+ years). I got this new computer within the past six months and both these printers stopped working while on this computer.
Any help or ideas would be appreciated.

Welcome to the HP Forums fastndfury,
I see by your post that you are only getting the error on the Windows 8 computer, "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I can help you with this issue.
I have provided a document to go through the steps to see if it will help resolve this issue.
'Another program has control of the scanner' Message Displays on the Computer When Scanning.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Print Spooler Issue

I recently became unable to print. My printer is installed and drivers updated, but I get an error when I try to print that tells me my Print Spooler Service is not running, and I cannot start it.
Windows 7 Home Edition 64bit
HP Touchsmart 310PC
Error Popup:
+++++++++++++++++++++++
Windows could not start the Print Spooler service on local computer.
Error 1053: This service did not respond to the start or control request in a timely fashion.
+++++++++++++++++++++++
Running diagnostics/troubleshooting does not resolve this issue.
When trying to print from some applications I get an error that says "No Default Printer Found. Please choose a printer a try again". I cannot choose another printer because of the spooler error.
Any suggestions?

rjscheper1,
This should fix it, look here
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Print spooler issues with windows 8

printer stopped when i switched to windows 8.
error message telling me print spooler is not functioning
unable to get it to function...every probram indicates that printer is working properly, yet it shows that I have no printer installed and my printer cannot be found or activated no matter what I do.
Joseph J Grech

Hi,
If updating the printer driver cannot fix the issue, please also try the following steps:
Clear Printer Spooler Files and Enable the Spooler Service
=================================
1. Run "Services.msc" (without the quotation marks).
2. Double-click "Printer Spooler" in the Services list.
3. Click Stop and click OK.
4. Navigate to "%WINDIR%\system32\spool\printers", delete all files in this folder.
5. Run "Services.msc" (without the quotation marks).
6. Double-click "Printer Spooler" in the Services list.
7. Click on Start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
Regards,
Arthur Li
TechNet Community Support

Cheque print: Spool list permission

Hi
We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
tx

Hi,
Please refer below post,
Re: Cheque: Printing problems

Print spooler log error ID 808 [Internet Explorer 11 + MS Office 2003-2007 x86 on Win7 sp1 x64 ONLY!]

howdy all,
could you please help me to resovle the very much odd issue of IE11 on Win7sp1x64 as below.
Note: my original post @ MS support is here [oops, sorry, I'm not allowed to paste a normal link here] "http://answers.microsoft.com/en-us/ie/forum/ie11-windows_7/print-spooler-error-id-808-internet-explorer-11-on/f52ff25c-4702-4ce3-827e-e1e9a5d324cf"
and now it's a repost due to advice of MS MVP PA Bear.
SUMMARY:
my 1st post there:
howdy all pros around,
i'd much appreciate any pro advice concerning the absolutely odd printer spooler issue as below.
sorry to post this again when there are a lot of look same cases available posted and discussed but now i shall insist that this is niether a printer driver nor a ms win7 spooler itself issue but the one of solely Internet Explorer 11
[11.0.9600.17041] installed onto fully updated Win7sp1x64(!) when i have 3 win7sp1 machines around and this issue doesn't occur on single 32-bit win7 pc!
the funniest point is that the issue doesn't prevent both win7sp1x64 computers to print normally!
also this never occurs while printing any docs or even web pages from Google Chrome.
but it always appears in win7 admin logs twice(!) while printing any web page from IE11! although there is no problem if you print web page from IE11 to PDF file...
this never happened with IE8 before its update thru MS Update to IE11 a couple of days ago.
error in short:
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information.
error in details:
Log Name:      Microsoft-Windows-PrintService/Admin
Source:        Microsoft-Windows-PrintService
Date:          2014-Jun-01 8:19:51 PM
Event ID:      808
Task Category: Initializing
Level:         Error
Keywords:      Print Spooler
User:          .......
Computer:      ...... PC
Description:
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information.
Event Xml:
< Event xmlns=
<System>
    <Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
    <EventID>808</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>36</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000020000</Keywords>
    <TimeCreated SystemTime="2014-06-01T11:19:51.957120800Z" />
    <EventRecordID>343</EventRecordID>
    <Correlation />
    <Execution ProcessID="10148" ThreadID="2188" />
    <Channel>Microsoft-Windows-PrintService/Admin</Channel>
    <Computer>...pc name...</Computer>
    <Security UserID="S-1-5-21-2467594599-1786318240-3752314299-1000" />
</System>
<UserData>
    <LoadPluginFailed xmlns:auto-ns3="..." xmlns="http    ...">
      <PluginDllName>C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL</PluginDllName>
      <ErrorCode>0xc1</ErrorCode>
      <Context>112</Context>
    </LoadPluginFailed>
</UserData>
< /Event>
you shall be assured that i've carefully looked thru many threads regarding the similar issues, and i'd much appreciate any non-common advice, when all common ways like uninstall/install printer etc don't work for sure.
thanks much
p.s. my printer model is hp deskjet 970cse - connected to a router thru usb and installed on all 3 win7sp1 machines as a local printer via the created standard tcp/ip port.
p.p.s. btw here are results of tool filever.exe as kindly provided long ago by Alan Morris of MS [oops, sorry, I'm not allowed to paste a normal link here] "http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-hp-printer-problems/6833a54c-6974-4fe9-b74c-93ed879781b0?page=2"
from one of my win7sp1x64 machines:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\...>filever c:\windows\system32\spool\drivers\x64\3\*.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     55,432 09-23-2012 adobepdf.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     26,768 09-23-2012 adobepdfui.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     39,048 09-23-2012 adregp.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp 1,294,472 09-23-2012 aduigp.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    623,104 11-21-2010 fxsapi.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    380,416 11-21-2010 fxsdrv.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp 6,566,400 11-21-2010 fxsres.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    434,688 11-21-2010 fxstiff.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    160,256 11-21-2010 fxsui.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    156,672 11-21-2010 fxswzrd.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    522,240 06-22-2009 hpf900al.dll
--a-- W32x64 DLL ENU        0.20.6.0 shp 1,692,672 05-07-2008 hpfimg50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     79,872 05-07-2008 hpfud50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    134,144 06-22-2009 hpfui50.dll
--a-- W32x64 DRV ENU 0.3.7601.18126 shp 1,402,880 04-10-2013 jnwdrv.dll
--a-- W32x64 DRV ENU 0.3.7600.16385 shp     98,816 07-14-2009 jnwdui.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    715,776 11-21-2010 mxdwdrv.dll
--a-- W32x64 DLL ENU 0.3.7601.17514 shp    221,184 11-21-2010 mxdwdui.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     16,384 09-20-2010 oemps.dll
--a-- W32x64 DRV ENU 0.3.6000.16386 shp    850,432 09-20-2010 ps5ui.dll
--a-- W32x64 DRV ENU 0.3.6000.16386 shp    628,736 09-20-2010 pscript5.dll
--a-- W32x64 DRV   -       0.3.151.3 shp     47,392 12-08-2013 tpprn.dll
--a-- W32x64 DLL ENU     7.15.297.19 shp    172,328 12-08-2013 tpprnui.dll
--a-- W32x64 DLL   -     7.15.297.20 shp     75,512 12-08-2013 tpprnuichs.dll
--a-- W32x64 DLL CHT     7.15.297.21 shp     75,544 12-08-2013 tpprnuicht.dll
--a-- W32x64 DLL   -     7.15.297.22 shp     80,208 12-08-2013 tpprnuicsy.dll
--a-- W32x64 DLL DEU     7.15.297.23 shp     81,704 12-08-2013 tpprnuideu.dll
--a-- W32x64 DLL   -     7.15.297.24 shp     80,200 12-08-2013 tpprnuiell.dll
--a-- W32x64 DLL ESN     7.15.297.25 shp     80,712 12-08-2013 tpprnuiesn.dll
--a-- W32x64 DLL   -     7.15.297.26 shp     81,208 12-08-2013 tpprnuifra.dll
--a-- W32x64 DLL   -     7.15.297.27 shp     80,224 12-08-2013 tpprnuihun.dll
--a-- W32x64 DLL JPN     7.15.302.41 shp     76,656 12-08-2013 tpprnuijpn.dll
--a-- W32x64 DLL   -     7.15.297.29 shp     76,568 12-08-2013 tpprnuikor.dll
--a-- W32x64 DLL   -     7.15.297.30 shp     80,176 12-08-2013 tpprnuiplk.dll
--a-- W32x64 DLL   -     7.15.297.31 shp     79,680 12-08-2013 tpprnuiptg.dll
--a-- W32x64 DLL   -     7.15.297.32 shp     80,728 12-08-2013 tpprnuirus.dll
--a-- W32x64 DLL   -     7.15.297.33 shp     80,184 12-08-2013 tpprnuitha.dll
--a-- W32x64 DLL   -        7.9.30.2 shp    152,816 12-08-2013 tpps.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    479,232 11-21-2010 unidrv.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    884,224 11-21-2010 unidrvui.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    762,368 11-21-2010 unires.dll
--a-- W32x64 DLL ENU 6.1.7601.17514 shp 1,576,448 11-21-2010 xpssvcs.dll
well, as far as i can see all binaries here are x64. moreover these files are same on another x64 pc and similar on x86 one but naturally x86 and located in another folder w32x86.
my last post there:
oops. action replay.
1. z printer works well (i.e. printing anyting w/o any problem) on 3 PCs - 2 of 3 with win7sp1x64; and 1 of 3 - win7sp1x86. all 3 with IE11 installed.
2. however BOTH (that is 2 of 3) above PCs of win7sp1x64 return errors to admin log every time when printing any web page from IE11. this occurs only if printing from IE11. non of other printing jobs are affected including a printing from Google
Chrome and Opera.
3. win7sp1x86 PC prints from IE11 w/o any errors in log!
4. a quote from my initial post:
you shall be assured that i've carefully looked thru many threads regarding the similar issues, and i'd much appreciate any non-common advice, when all common ways like uninstall/install printer etc don't work for sure.
appreciate.
THANKS A LOT!
UPDATE! i'm sorry to provide you with a bit incomplete/incorrect error sympthoms.
this error is being returned to win7sp1x64 PCs print server logs not only while printing from IE11 but from MS Office 2003 & 2007 as well, however all non-MS applications to print out from (Adobe, ACDSee, Chrome, Opera, etc.) aren't affected at all.
also test page printing is always OK!
so i've amended the header of my post accordingly.
thanks again!

howdy Karen,
2 (two) PCs of quite similar win7sp1x64 config affected!
sorry but your kind prompt doesn't work. i've not only tried to remove all printers except AdobePDF Converter, CANVAS PS, Fax, MS XPS Writer in common way from Devices & Printers menu but also removed all their dependencies in Printer Server config menu
(access thru DOS printui /s /t2) except same AdobePDF Converter, CANVAS PS, MS XPS Writer (all x64 Type 3 - User Mode).
moreover i've managed to update the troubled core component thru a manual install of HP PLC6 Universal Driver, so now its updated as below:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\..>printui /s /t2
C:\Users\..>filever c:\windows\system32\spool\drivers\x64\3\*.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     55,432 09-23-2012 adobepdf.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     26,768 09-23-2012 adobepdfui.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     39,048 09-23-2012 adregp.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp 1,294,472 09-23-2012 aduigp.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    623,104 11-21-2010 fxsapi.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    380,416 11-21-2010 fxsdrv.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp 6,566,400 11-21-2010 fxsres.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    434,688 11-21-2010 fxstiff.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    160,256 11-21-2010 fxsui.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    156,672 11-21-2010 fxswzrd.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    522,240 06-23-2009 hpf900al.dll
--a-- W32x64 DLL ENU         0.1.6.7 shp 5,263,872 05-08-2008 hpfiglhn.dll
--a-- W32x64 DLL ENU         0.5.1.0 shp    231,936 06-23-2009 hpfime50.dll
--a-- W32x64 DLL ENU        0.20.6.0 shp 1,692,672 05-08-2008 hpfimg50.dll
--a-- W32x64 DLL ENU         0.4.5.0 shp     16,384 05-08-2008 hpfres50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     79,872 05-08-2008 hpfud50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    134,144 06-23-2009 hpfui50.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp 1,485,312 06-23-2009 hpz3alhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp 1,442,304 05-08-2008 hpz3rlhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp    365,568 06-23-2009 hpzevlhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp     88,064 06-23-2009 hpzprlhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp    562,176 05-08-2008 hpzsslhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp 3,447,808 05-08-2008 hpzstlhn.dll
--a-- W32x64 DLL ENU      61.53.25.9 shp 2,414,080 06-23-2009 hpzuilhn.dll
--a-- W32x64 DRV ENU 0.3.7601.18126 shp 1,402,880 04-10-2013 jnwdrv.dll
--a-- W32x64 DRV ENU 0.3.7600.16385 shp     98,816 07-14-2009 jnwdui.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    715,776 11-21-2010 mxdwdrv.dll
--a-- W32x64 DLL ENU 0.3.7601.17514 shp    221,184 11-21-2010 mxdwdui.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     16,384 09-20-2010 oemps.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    854,304 12-04-2013 ps5ui.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    636,704 12-04-2013 pscript5.dll
--a-- W32x64 DRV   -       0.3.151.3 shp     47,392 12-08-2013 tpprn.dll
--a-- W32x64 DLL ENU     7.15.297.19 shp    172,328 12-08-2013 tpprnui.dll
--a-- W32x64 DLL   -     7.15.297.20 shp     75,512 12-08-2013 tpprnuichs.dll
--a-- W32x64 DLL CHT     7.15.297.21 shp     75,544 12-08-2013 tpprnuicht.dll
--a-- W32x64 DLL   -     7.15.297.22 shp     80,208 12-08-2013 tpprnuicsy.dll
--a-- W32x64 DLL DEU     7.15.297.23 shp     81,704 12-08-2013 tpprnuideu.dll
--a-- W32x64 DLL   -     7.15.297.24 shp     80,200 12-08-2013 tpprnuiell.dll
--a-- W32x64 DLL ESN     7.15.297.25 shp     80,712 12-08-2013 tpprnuiesn.dll
--a-- W32x64 DLL   -     7.15.297.26 shp     81,208 12-08-2013 tpprnuifra.dll
--a-- W32x64 DLL   -     7.15.297.27 shp     80,224 12-08-2013 tpprnuihun.dll
--a-- W32x64 DLL JPN     7.15.302.41 shp     76,656 12-08-2013 tpprnuijpn.dll
--a-- W32x64 DLL   -     7.15.297.29 shp     76,568 12-08-2013 tpprnuikor.dll
--a-- W32x64 DLL   -     7.15.297.30 shp     80,176 12-08-2013 tpprnuiplk.dll
--a-- W32x64 DLL   -     7.15.297.31 shp     79,680 12-08-2013 tpprnuiptg.dll
--a-- W32x64 DLL   -     7.15.297.32 shp     80,728 12-08-2013 tpprnuirus.dll
--a-- W32x64 DLL   -     7.15.297.33 shp     80,184 12-08-2013 tpprnuitha.dll
--a-- W32x64 DLL   -        7.9.30.2 shp    152,816 12-08-2013 tpps.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    485,664 12-04-2013 unidrv.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    890,656 12-04-2013 unidrvui.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    768,800 12-04-2013 unires.dll
--a-- W32x64 DLL ENU 6.1.7601.17514 shp 1,576,448 11-21-2010 xpssvcs.dll
C:\Users\..>
than made a clean Deskjet 970ce printer install.
same thing - test page printing OK but same error in log if print from IE11 and MS Office.
any other ideas?
thanks

Cheque Print. issue (urgent)

Dear all,
Iam facing an issue related to cheque print.
We are using T-code FBZ5 to print cheque when ever we are issuing check system updates cheque number in reference field of payment Document.
But from the 01.04.2008 system not updating check number on reference field properly for some document it is updating for some documents it is not.
Plz help me to solve this issue because of this our BRS get effected.
I will assign points
Thanks in advance.
SU*

Dear Umar,
please check with your ABAP consultant.
this is purly ABAP related thing in the print format you are not
consider the date of the Clearing Document, because of that some times system is up dated last year Doc. with same Doc. no.
this is the field name REGUP
Regards
radha

Local printer management --Spooler Issues--

Trouble: of the 3 production printers on a local machine 1 to many of the printers may have a Job get stuck in printing for some unknown issue. Clicking cancel job / Delete fails to remove the Job from the List. At this point i am forced to Kill the Print
Spooler and restart it.
Want to have From Wscript.Shell or VBS: for each printer with a Que Count >1 Find the First JobId with a bad status delete this and Copy the remainder of the PrintQue content to a Local "Temp" location use a CancelAllJobs() method, then Replace
all the Content back into the printer Spooler for re-issue.
Thoughts?
Thanks

I would investigate the root cause of why certain print jobs cause a problem.
Bill

Strange T400 issue - Dock/Print Spooler

Have a user within the company here.
Windows XP Professional SP3 - Print spooler continuously stops itself.
At first I thought it may have been an OS issue, but everything checks out just fine there.
So, I go take the laptop and am bringing it back to my desk to work on it, and I login while at their desk, and the print spooler is now fine. So, I log off, have them log back in, and everything is fine.
So, I go to say everything is fine, but I decide to put it back on the advanced mini dock to see if it works, prints fine there. So I restart the laptop, have the user log back in, print spooler isn't working.
It appears that as long as during startup the laptop is not in the dock, and once logged in you don't log off and back on, the print spooler will operate normally.
Anybody ever seen something like this?

hi,
I checked with other sample application also.. but its not working fine.
i am using firefox browser right now. can you explain why the issue is coming??

Issue in Cheque Printing using Laser Printer

Hi,
There is a requirement wherein cheque needs to be printed from F-58 using Laser Printer.I have created the custom page format for Cheque printing .Attached it to the custom device type that i have created(Copy of Device type HPLJIIID).Aslo i have attached the page format to the tray1 of the 'Tray Info' tab of Output devices in SPAD.
I am getting the print information correctly on the cheque but what happens is that the Printer gives an error message saying'Jam in Fuser Area' and the cheque has to be taken out of the rear door of the printer,it doesn't come out automatically.As a result for
printing the next cheque, printer has to be restarted.
Require your help on this.
Regards
Vinod

Hi All,
Forgot to mention one thing.I am making use of script ZF110_PRENUM_CHC (copy of standard script F110_PRENUM_CHCK)
for cheque printing.

Formatting issue in cheque printing

Hello!
We are using automatic payment for cheque printing using smartforms.
The printer is Epson LQ 300 +II and device type is EPESCP9.Printing was ok with EPESCP2 as well.
The cheque is printing perfect on QAS Server but when we print it in Production server,
one secondary window containig field (Amout figure) formatting is getting corrupted.
In print preview it shows field at right place but printer send it deep down another secondary window when printing.
Both secondary windows are not overlapping.
If I open smartform in PRD,it shows field at right place.
Its very urgent-cheques getting delayed ,so any suggestions would be welcomed.
Best Regards
Nouman

Hi Nouman,
Check with the printer admin the width and height the printer can print. This is important because the width you have set in smartform is more than the printer capable width.
Next check the page layout which you have used probably you might have used custom page format.
Check the above in SPAD transaction code.
If it is above then just reduce the width and height of the windows you have used in smartforms.
BR
Dep

Cheque Printing issue in T.Code FBZ5

Dear Expert,
we r using transaction code FBZ5 for cheque printing.we have two cheque both have different size.
Is it possible assign two script for cheque printing in T.Code FBZ5.
Any other solution availabel for two different size cheque printing

Dear Pavan,
As per customization settings, you can assign one FORM for cheque printing against Payment Method 'C' at a time.
Check T.Code FBZP.
If you have different Co.Codes, then it is possible to create a new FORM and assign to other Co.Code for same Payment Method.
Regds
Anil

Smiley characters displayed in cheque printing in F110

Hello Gurus,
We are using the customised Z copy of the cheque printing program RFFOUS_C and the sapscript. I have customised the layout of the cheques to be printed based on the different banks.
This is working fine when done through transaction F-58 i.e. based on different banks different layout's are printed. However, when this is done through transaction F110, and i check the spool the script is printed but some junk parameters are also displayed like <smiley> characters.
Can anyone let me know why this could be happening. << Priority normalized >>
Regards,
Ritwik Rajkumar
Edited by: Rob Burbank on Sep 22, 2011 9:52 AM

Hi Mannu,
You need to go to F110 --> Environment --> DME Administration --> Goto the screen Program SAPMFDTA.
Here under the include MFDTAI01 put a break-point at the below mentioned perform routine.
module docu_xdown input.
perform docu_show using 'FDTA' 'DOWNL_MIT'.
endmodule.
This might solve your issue.
Regards,
-Syed.
Edited by: wahid hussain syed on Jun 8, 2009 8:32 AM
Edited by: wahid hussain syed on Jun 8, 2009 8:35 AM

Printing ZPL (Zebra) data to printer spooler without character conversion

Hi all,
We are printing shipping labels from UPS, with a process where we recive the ZPL label code directly from UPS, and we just need to pass the data to the printer to get the labels. We have already implemented this with Fedex and some custom labels, and it works perfectly. The problem with the UPS label data is that it contains non-printable characters (in the MaxiCode data field). When passed to the SAP printer spooler (see code example below), the data gets corrupted because SAP interprets these non-printable characters as printer control codes.
I have verified this by saving the ZPL data to a local file, before printing it through the SAP spooler. I then print this raw data and compare the output with the labels printed from the spooler. The MaxiCode (the big 2D barcode) is different in these labels. UPS has also tested the labels, and rejected them because of incorrect data in the barcode.
For printing, we are using printers defined as type "PLAIN", but I also tried using the "LZEB2" device type with the same result. The error we see in the spooler entry is this:
Print ctrl S_0D_ is not defined for this printer. Page 1, line 2, col. 2201
Print output may not be as intended
The printer ctrl code differs, depending om the label. I have examined the spooler data in "raw" mode, and there is always an ASCII character 28 (hex 1C) in front of the characters that SAP think are control codes, and this is why I think these non-printable characters are the reason for the problems.
This is the function module I use to print the ZPL data (and as stated above, this works fine for Fedex and custom labels). The ZPL data is converted to binary format before passed to the function module, but I also tried to send the data in text format with another FM, but the result is the same. I have experimented with the "codepage" parameter, and this one gives the least amount of errors, and some labels actually get through without errors. But still at least 50% of the labels gets corrupted, with log entries like above.
CALL FUNCTION 'RSPO_SR_WRITE_BINARY'
      EXPORTING
        handle           = lv_spool_handle
        data             = lv_label_line_bin
        length           = lv_len
        codepage         = '2010'
      EXCEPTIONS
        handle_not_valid = 1
        operation_failed = 2
        OTHERS           = 3.
Does anyone know if there is a way to send data to the spooler without character conversion or interpretation of printer control codes? Or is there any other smart way to get around this problem?
/Leif

I do a more direct output to the spooler, to avoid any issues with the WRITE statement and SAP's report output processing. At the same time, I insert line breaks so that the output is easy to debug in the spooler if needed. Also included is the code to to detect the escape code (ASCII #28) and to insert a control code ZZUPS in its place (you can skip this for Fedex). Here's a simplified example, but please note this is for a Unicode system, some minor changes is required in a non-Unicode system.
CONSTANTS: lc_spcode TYPE c LENGTH 5 VALUE 'ZZUPS',
           lc_xlen TYPE i VALUE 5.
   DATA: lv_print_params TYPE pri_params,
         lv_spool_handle TYPE sy-tabix,
         lv_name TYPE tsp01-rq0name,
         lv_spool_id TYPE rspoid,
         lv_crlf(2) TYPE c,
         lv_lf TYPE c,
         lstr_label_data TYPE zship_label_data_s,
         lv_label_line TYPE char512,
         lv_label_line_bin TYPE x LENGTH 1024,
         lv_len TYPE i,
         ltab_label_data_255 TYPE TABLE OF char512,
         ltab_label_data TYPE TABLE OF x,
         lv_c1 TYPE i,
         lv_c2 TYPE i,
         lv_cnt1 TYPE i,
         lv_cnt2 TYPE i,
         lv_x(2) TYPE x.
   FIELD-SYMBOLS: <n> TYPE x.
   lv_crlf = cl_abap_char_utilities=>cr_lf.
   lv_lf = lv_crlf+1(1).
   lv_name = 'ZPLLBL'.
CALL FUNCTION 'RSPO_SR_OPEN'
     EXPORTING
       dest                   = i_dest
       name                   = lv_name
       prio                   = '5'
       immediate_print        = 'X'
       titleline              = i_title
       receiver               = sy-uname
*      lifetime               = '0'
       doctype                = ''
     IMPORTING
       handle                 = lv_spool_handle
       spoolid                = lv_spool_id
     EXCEPTIONS
       device_missing         = 1
       name_twice             = 2
       no_such_device         = 3
       operation_failed       = 4
       OTHERS                 = 5.
   IF sy-subrc <> 0.
     RAISE spool_open_failed.
   ENDIF.
LOOP AT i_label_data INTO lstr_label_data.
     CLEAR ltab_label_data_255.
     SPLIT lstr_label_data-label_data AT lv_lf INTO TABLE ltab_label_data_255.
     LOOP AT ltab_label_data_255 INTO lv_label_line.
       IF lv_label_line NE ''.
         lv_len = STRLEN( lv_label_line ).
*       Convert character to hex type
         lv_c1 = 0.
         lv_c2 = 0.
         DO lv_len TIMES.
           ASSIGN lv_label_line+lv_c1(1) TO <n> CASTING.
           MOVE <n> TO lv_x.
           IF lv_x = 28.
             lv_cnt1 = 0.
             lv_label_line_bin+lv_c2(1) = lv_x.
             lv_c2 = lv_c2 + 1.
             DO lc_xlen TIMES.
               ASSIGN lc_spcode+lv_cnt1(1) TO <n> CASTING.
               MOVE <n> TO lv_x.
               lv_cnt2 = lv_c2 + lv_cnt1.
               lv_label_line_bin+lv_c2(2) = lv_x.
               lv_c2 = lv_c2 + 2.
               lv_cnt1 = lv_cnt1 + 1.
               lv_len = lv_len + 1.
             ENDDO.
           ELSE.
             lv_label_line_bin+lv_c2(2) = lv_x.
             lv_c2 = lv_c2 + 2.
           ENDIF.
           lv_c1 = lv_c1 + 1.
         ENDDO.
*       Print binary data to spool
         lv_len = lv_len * 2. "Unicode is 2 bytes per character
         CALL FUNCTION 'RSPO_SR_WRITE_BINARY'
           EXPORTING
             handle                 = lv_spool_handle
             data                   = lv_label_line_bin
             LENGTH                 = lv_len
           EXCEPTIONS
             handle_not_valid       = 1
             operation_failed       = 2
             OTHERS                 = 3.
         IF sy-subrc <> 0.
           RAISE spool_write_failed.
         ENDIF.
       ENDIF.
     ENDLOOP.
   ENDLOOP.
   CALL FUNCTION 'RSPO_SR_CLOSE'
     EXPORTING
       handle = lv_spool_handle.
   IF sy-subrc <> 0.
     RAISE spool_close_failed.
   ENDIF.

How to monitor Print Spool folder in Business Objects XI R2 - Crystal report

Hi Guru's
We recently had a issue where disc space was full in BO server and it was down. The reason was there was one job in print spool folder which was eating up whole space in C drive.
We had to stop the print spool service and delete the jobs and restart it back.
In order to prevent this from happening what can be done??.
One way that my client suggested is to write a script where in it will send us the size of print spool folder every hour so we can find the report which is causing this. I have no idea how this can be done.
This happened once and I dont have an answer when my manager asks will it happen again. Is there a way where we can monitor this or stop this from happening.
My current environment is
BOXI R2 , crystal report XI is the reporting tool.
Thanks.

Normally you should run your CR reports in the INfoView. You can start a report either by double clicking on it or by selecting View in the context menu. Still in order to fetch data you have to press the Refresh button in the CR viewer window (in the InfoView).
In the CMC I assume that you are using the Run now option in the context menu. Please note that this will just schedule your report immediatelly. hen the report is scheduled a new instance is created hich is available in the History of the report. In order to see a report in the CMC select again View in the context menu and you can again fetch data by pressing the Refresh button.
Regards,
Stratos

Cheque Printing Spool Issues

Similar Messages

Maybe you are looking for