Cheque printing using MICR fonts on HP P3005n series

Hi,
I am doing a HCM implementation on ERP 6.0 ehp3 server. We need to print cheques using the MICR fonts on HP P3005n printer.
I found that MICR_C and MICR_E fonts are already installed in the system. But when we try to print, the MICR characters are not getting printed.
I have tried with different device types like TROYMICR, HPLJMI, HP5MI, ZHPP3005 but no luck. The printer uses the toner MICR-THN-51A
Where could be the problem? Do i need to do some more configuration in SAP or is printer needs to be configured?
Please help me as we are in testing phase and as the cheques are not printed we are stuck.
Is it necessary to use TROY or Jetmobile printer to print MICR characters?
Your inputs will be highly appreciated.
Thanks

Hi Naithan,
If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
Regards,
Anil

Similar Messages

  • I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    Greetings,
    Here's a direct link to the drivers you need, they should work perfectly for your situation.

  • Cheque Printing using HP LaserJet P3005n printer

    Hi To All,
    We have problem in cheque printing. There is a output but the words are missed aline. The device type is HP Laserjet 4 PCL-5 and O.S. is AIX 5.3. Before it is running OK with HP Laserjet 4 printer model. Is this a driver issue in O.S. side? I cannot find suitable driver for this new printer that is suitable in AIX.
    Thank you in advance.
    Naithan

    Hi Naithan,
    If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
    Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
    Regards,
    Anil

  • How to use MICR fonts in Adobe forms (webdynpro java

    Hi,
          We have a requirement where we need to print some MICR codes (for checks) through Adobe Forms.
    I have installed some true type MICR fonts in windows and Adobe Font Manager (in ADS) as well.
    It is visible in the Adobe Form design time (Font palette) and when I use the font for text, it is visible in preview too. But when I run the web dynpro application, in the online form it is converted into Standard font (Times new Roman).
    Is there anyway to handle this issue.
    Please let me know.
    I am using NWDS 7.0.1
    Adobe Live cycle designer 7.1
    SAP NW 2004s SP14
    Thank you,
    Vasu

    Check this forum post (though that is for 6i, it would be of helpful for you)
    How to use unicode fonts in Oracle forms 10g?
    -Arun

  • Issue in Cheque Printing using Laser Printer

    Hi,
        There is a requirement wherein cheque needs to be printed from F-58 using Laser Printer.I have created the custom page format for Cheque printing .Attached it to the custom device type that i have created(Copy of Device type HPLJIIID).Aslo i have attached the page format to the tray1 of the 'Tray Info' tab of Output devices in SPAD.
    I am getting the print information correctly on the cheque but what happens is that the Printer gives an error message saying'Jam in Fuser Area' and the cheque has to be taken out of the rear door of the printer,it doesn't come out automatically.As a result for
    printing the next cheque, printer has to be restarted.
    Require your help on this.
    Regards
    Vinod

    Hi All,
             Forgot to mention one thing.I am making use of script ZF110_PRENUM_CHC (copy of standard script F110_PRENUM_CHCK)
      for cheque printing.

  • Blank page in cheque printing using sapscript

    hi,
    i've created a Z script for cheque printing copying the standard script and driver program remains RFFOUS_C. I've deleted all windows except CHECK and MAIN. In main, i've commented all code and elements. In check, i've added my own code to print cheque details and rest everything else is commented. There are no blank lines in either of the windows. There is only 1 page i.e. FIRST in the script and no next page. After all this i'm still getting an extra balnk page after i get cheque details on 1st page. i'm using Transaction F110 to generate the cheque.
    Please suggest what can be done in such a case. Do i need to make changes in std program RFFOUS_C for this??
    Thanks!

    Hi,
    Are there any blank data in the internal table which is used for printing. Also check whether there are any othere details like text elment after printing check details
    Thanks
    kamath

  • Check Printing With MICR font

    Hi
    I am working on check printing.I have downloaded MICR font from IDAutomation.
    In my template i added few labels with MICR font but when i preview it, the font in the pdf is not displaying MICR instead its showing in arial.This is just from the template preview and not in apps preview.I tried to do the font mapping in XML admin and still no luck.Can any one help me with this.
    Thanks,
    Harsha

    Hi all,
    I followed all the steps to create a font file and then font mappings.Still when i click the priview button, the font is not MICR in pdf output.I downloaded GnuMICR and still no luck.Can any one please tell me if you have got the pdf output in MICR font either in rtf template preview or in apps preview if so can you guide me.
    Thanks
    Harsha

  • Cheque printing using F110

    Hi Experts,
    I am doing check printing using F110 txn. Problem i am facing is, i am not able to debug the sapscript, means how all data is passed through. I have put the breakpoint in print program also and activated the debugger for script (in SE71) but its not stopping anywhere , neither in print program nor in script,
    please help me out as i need to deliver this on priority.

    Hi Mannu,
    You need to go to F110 --> Environment --> DME Administration --> Goto the screen Program SAPMFDTA.
    Here under the include MFDTAI01 put a break-point at the below mentioned perform routine.
    module docu_xdown input.
      perform docu_show using 'FDTA' 'DOWNL_MIT'.
    endmodule.
    This might solve your issue.
    Regards,
    -Syed.
    Edited by: wahid hussain syed on Jun 8, 2009 8:32 AM
    Edited by: wahid hussain syed on Jun 8, 2009 8:35 AM

  • Cheque printing using RFFOUS_C

    Hi Friends,
    Iam using the standard program RFFOUS_C program to print the cheques. My requirement is to print cheques continously in one page as iam getting pre numbered cheques.
    Standard program RFFOUS_C prints one cheque per page.
    Please let me know how to proceed to achive my reqiurement.
    regards
    Soni

    Hi Aravind,
       That Layout of printing is not depends on the RFFOUS_C, it depends on the Layout design. You will get values from program. You need to change the Layout only.
    regards,
    Chandra.
    Note: Please reward if helpful.

  • Variable printed using incorrect font - Sapscript

    Hi,
    I am using a Sapscript form to print a document. I am printing a variable using a A_SIMP font. When I try to print 2 diff documents each of this document prints the text in either Courier or Times. I want it to be repalced by either Courier or Times and not either or. I tried changing the replacement font for A_SIMP but it does not work.
    The paragraph format used does not define any font. I am using a character format which has the A_SIMP font defined. I am using frontend printer and the devide type does not include A_SIMP font in it.
    Thanks,
    Vivek

    Hi Aidan,
    I wanna know what did you mean with "You must also tell the SAP system the name of the Windows font" ?
    I have a similiar problem but mine the text in the smartforms strike by #
    I have installed the fonts in 4.7, but when I upgraded it to Ecc6.0 the font is still exist, but the text displayed is being striked with #.
    I have checked like you have said in SE73, my font family is ZCORSIVA and the RTF Text is FONT Monotype Corsiva. is there something wrong with it?
    many many thanks
    @addition :
    I have changed the RTF Text from FONT Monotype Corsiva to Monotype Corsiva (TrueType). But it didn't work. any idea?
    Edited by: AbaPJuNioR on Aug 31, 2010 6:13 AM

  • Not able to view MICR fonts in the Print Preivew

    Hi All,
    I can the check number - Bank routing number - Account number printing in the Print preview of the script. I have Used MICR Fonts (MICR_E) and given the code like this -
    C&REGUD-CHECT&C:C&REGUH-UBNKY&C:C&REGUH-UBKNT&C
    But it looks normal in the print preview.
    I want to know how it looks lin the print preview ? Should it look like the MICR Fonts in preview or it only Prints when it is printed.
    Thanks
    Senthil

    In terms of Sapscript (and I guess smartforms) then you will not see the MICR in the preview as the font usually only exists in the printer.  In theory you could probably load a MICR Truetype font and use that but it is simple enough to test print with the MICR font cartridge.
    Cheers
    Allan

  • MICR Font for printing payroll checks

    We are in the process of changing banks. The new bank has rejected our sample checks because the spacing is too wide. We are supposed to be using MICR font E-13B.
    How do I find out what font we're using? And, how do I change the font?

    I used the free GnuMICR.ttf from this site: http://sandeen.net/GnuMICR/
    The checks were reviewed by a bank and approved.

  • Problem with cheque printing in production Server Tcode - FBZ5

    Hi
    Cheque Printing using SAPScript with TCODE FBZ5.
    I had a problem with cheque printing in production Server. TCODE - FBZ5
    It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
    Could you please let me know, where the problem is occuring.
    The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
    Sekhar

    Hi,
    For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

  • Select-options in cheque printing

    hi all,
    i have developed new layout for cheque printing using smartforms.
    using parameters i am getting document no, corresponding all details getting print.
    but the client wants to use multiple document no.
    in function module also i am passing only one import parameter (i.e. doc.no).
    my requirement is how to pass multiple data in smartfroms.
    Rajasekaran.

    hi,
    probably you have to go for tables.
    create internal table and pass that in the form interface.
    santhosh

  • Continous Cheque Printing  !!!!

    hello everybody,
    the problem i am facing is with the <b>continous cheque printing</b>,
    using the TCODE - f110 ,everything is working fine,
    but the problem is, out of the multiple cheque it prints only one cheque
    at a time. after triggering the print command ,it print the same cheque.
    pls help me out , 2 print the continous cheque
    waiting 4 ur reply,
    Rakesh

    Hi,
       I am working on cheque printing using sapscript f110_prenum_check and standard program rffous_c. I had made changes so as to display line items for that document number Iwhich desiplays Bill no, Bill date, TDS, Net Amount etc.) . This works fine for single vendor. But, now I want to do cheuqe printing for multiple vendors. I suppose you had worked on that..Please help me how to go about..and what changes I am supposed to make in the program..Please respond me ..its very urgent...
    Thanks in advance..
    Ujjwala

Maybe you are looking for