CHGRDBDIRE change rdb name for new installation.
In the installation guide, SAP advices us to change the *LOCAL relational database name to match the hostname.
However, currently my system already has an *LOCAL rdb name entry which follows the default machine/serial number name . The command using CHGRDBDIRE advised by SAP doesnt allow changing the name for *LOCAL entry.
The only method to change the name is to delete the default *LOCAL rdb name and recreate a new *LOCAL entry. Is it safe do to so ? IT contains the objects the QGPL and QTEMP schema now.
Hi kikco
no problem with that - I did this several times already ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de
Similar Messages
-
"Untitled" as default document name for new documents
I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
Thank you.
Juan PoniachikOn what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
Mylenium -
My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!
11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix. -
Local node not included in the list of host names for grid installation
I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PMHi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian -
How to change host name for SLD
Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
AlexHi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu -
How to change host name for management agent.
Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
MatinHi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu -
Change computer name for wlan-sync
for wlan-sync the divice has to be connected to a computer with a certain name. I have a new computer now with a different name. How do I change the name of the computer to sync with itunes via wlan?
Follow these instructions to make this computer your syncing computer. Then select the wif isyncing option.
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Changing Server Name for EAS Account
Is there a way to change the server name for an EAS account without having to remove the account and re-add it? If not, Palm please put in this ability.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.Hello!
The reason for this not avail as a security feature built into the EAS protocol. From a corporate security point of view, corporations do not want the chance of company-sensitive data being extracted/put into a different server(s) that could very well be not their own. Any device that uses EAS will have to remove the acct and add the new one. You IT will need to assist with any data migrations that the new server doesnt have. -
Transferring DAQ name on new installation
Dear Labview forum,
I have an M-series USB DAQ.
I have built in Labview 8.0 an executible version of software to interact with the DAQ, plus an installation disk with a setup.exe program which installs my executible, a runtime version of labview, and MAX.
However, after installation on a new PC, when plugging in the DAQ, Windows XP must do its own additional hardware installation to recognise the DAQ and then one needs to use MAX to rename the DAQ from Dev1 to my more meaningful name. Is it possible for the installation setup program to complete these additional steps too so that after installation both the software and DAQ are ready for use?
This would reduce the setup complexity for the non-technical user.
Regards,
Jamie
Using Labview version 8.0You can use the VI "MAX Copy Configuration.vi" to reload the configuration in MAX on a new system and save it on a development system.
You can use "File->Export" in MAX to export the system configuration to file.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl) -
Changing domain name after 12i installation
Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1 -
How can I Change Asset names for swapped images in duplicated symbols?
I have what seems to be a bug in edge animate cc2014 in following circumstances:
1. Duplicate a symbol
2. Drag duplicate symbol onto stage.4
3. Rename symbol
4. Click to edit symbol
5. Select an image inside the symbol
6. In properties panel change path to swap the image to be used in this instance of the duplicated symbol ( I need to reuse this symbol many times and not being able to change asset names is a real problem!).
7. The names for the asset in both the timeline and the elements were auto generated at the time of duplication when try to change the names they revert back to the auto generated names.
How can I overcome this problem which is clearly a bug or a poorly thought through bit of programming by an otherwise highly competent adobe edge animate tesm
Thank in advance
David.Again, incorrect. It's not about how I can address a specific symbol with code - no problems there - it's what the composition loads into the symbol. Try it with some complex component or sub- symbols.
Work-Around for using Duplicated and Revised symbols (symbol variants) in the SAME document. Solution.
Tedious, but easy. Low risk. Edge Animate 2014.1.1
When you duplicate a symbol comprised of symbols itself ("sub-symbols"), only the outermost symbol gets a unique name, not it's component inner symbols. Upon import of additional variants, a unique name is created in the Library/Symbols panel for the inner symbols, yet the references in the outer symbol can't update to use those unique inner-symbol names. Therefore, the composition loads the symbol with the matching name. This will be the first variant to be imported.
Make the Duplicate
Duplicate the symbol in the Library/Symbol Panel. Rename. Export.
Prepping the Symbol
Open a new document, import and place the new symbol.
Select the asset to be switched/replaced. Make the switch in the property panel. Properties/Images/Swap button. (I revised my base or source symbol to have different colored background images. This is how I created 4 color variants.)
Save the new document, of course. "Example1.an"
Export the revised symbol from the Library/Symbol Panel for safe keeping.
Return to Example1.an
Elements Panel: Work through the nested symbols, adding a preceding identifier to all symbols in the heirarchy.
*KEEP IT SIMPLE so you can easily and quickly move through the .js files in the following steps.*
Save Example1.an.
Library/Symbols Panel: Go down the list, renaming all the symbols with the same preceding identifier as was used in the Elements Panel. *I advise to stay parallel with the Elements panel. Change as little as possible.*
Disregard any odd appearance you may see on the stage for now.
Save Example1.an
Revising the Code
In Edge Code, also part of the Creative Cloud suite, or any code editor, open the two .js files for "Example1.an." found in the same folder...Edge.js and ...EdgeActions.js
...Edge.js
find "symbolName" - prepend with the identifier whatever is not already prepended.
at the same time, look for "id" nearby - prepend with the identifier whatever is not already prepended.
Save
...EdgeActions.js
First read the grey comments about not degrading the //Edge Comments.
Search the document for "//Edge symbol" - prepend whatever is not already prepended.
Carefully check all the orange text, prepending the symbol names you find. This same code can be seen in your Code Panel with the "Full Code" button.
Save
Return to Edge Animate
When prompted to Reload, say yes.
Save Example1.an
EXPORT your new top level symbol - now a fully separated asset.Now you have created a fully unique symbol, which can be used in conjunction with other variants in the same document.
Import your new, unique symbol variant it into your real document.
This is the solution if your Symptoms are:
I duplicated symbols to make different variations, but now I can't use the duplicated symbol variants together.
When I try to swap images in a duplicated symbol, it succeeds when used alone, but reverts when used with the original symbol.
My duplicated symbol works properly alone, but not when it is used with the original symbol.
My symbol seems to revert to the original source symbol. -
How to change file names for .icc profiles in CS4?
I recently downloaded several photo paper profiles to my Mac (OS 10.5.8) and installed them in the Library > ColorSync > Profiles folder. I edited the rather cryptic file names slightly so I could better determine which paper each profile was for.
But when I check the drop-down list of profiles available in the Print dialogue for CS4, the file names are still the original ones that were initially downloaded. I rebooted my OS and relaunched PS, but no change.
Are these .icc files being kept somewhere else on my System HD by PS? Is this not a good thing to even try doing, or can I just change the .icc file names in the location that PS is accessing them? Thanks.Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks. -
Change "Description" name for Hyper-V Core for networks
Hello,
i am creating 3 seperate networks for our Hyper-v Environment :
- Core
- Live Migration
- Production
When a multiple network-cards are teamed, the description of a team is : "Microsoft Network Adapter Multiplexor Driver".
I want to change this name to the network-name like "core".
Is this possbile form Hyper-v Server 2012R2 Core?
ThxHi Mvd12345,As far as I know network card device description is created by NIC driver .
I'm afraid you can not do that .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Change the name for File Type....
H CRM Experts,
How can i change the name of that button? i want it to have the name "voir" instead of "browse"
<input type="File"/>
Thanks
SriniThis is a tricky one. Even if it is not related to SAP CRM WebClient in any way as you are using standard HTML INPUT tag. That is not THTMLB or CHTMLB tag library.
The probolem is: For a file upload field behind the field there is a button that shows always the same text. In english version "Browse" in germany it is "Durchsuchen" you can not change it. It is hardcoded in the browser for that specific language.
There is a nice screenshot on this page illustrating it: http://www.quirksmode.org/dom/inputfile.html
As said before it is a pure HTML related issue. You will be able to finde your solution using your favourite search engine. I propose this link: http://forums.seochat.com/html-coding-11/change-text-button-in-input-file-205212.html
cheers Carsten -
Changing Object Names for Burst Output in Financial Reporting
I can't quite figure out how to say this so I can't even search for the proper terms to get any pertinent results. I apologize if this has been answered recently.
In FR Batch Scheduler, I am exporting the reports as PDF to a specified folder. I am bursting the report with a department, however, it does not like to save files with spaces. Instead, FR replaces any spaces in the Object name with a plus "+" sign. Is there a way to change this to a different delimiter in the .properties files? Not sure which one.
Thus:
Date is March 2nd, 2011 and Member name is "Physician Revenue"
Object Label:
<<Date(YYYYMMMDD)>>.<<MemberName()>>.IESUM
PDF Output becomes
2011Mar02.Physician+Revenue.IESUM.pdf
Desired FileName output
2011Mar02.Physician_Revenue.IESUM.pdf
Thanks
EricIf this is the same issue I'm having, I've been working with Tech Support - they confirmed it as a bug the other day and the patch is done but it's not ready for us to have yet. They'll let me know when it's available for public use.
When bursting, the resulting PDFs have strange characters in the PDF name for many characters such as these that we use:
and probably "space", I'm not looking at it right now but yes this sounds like your issue too. Stay tuned.
-Karen
edit: I'm on 11.1.2.1
Edited by: ksmek on Sep 28, 2011 10:34 PM
Maybe you are looking for
-
Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?
-
I have done Oracle Database Administration Track and I need a job for that purpose i want any one to send me the interview questions I need any job and i have to prepare for the interview................... Please help me............... My e-mail add
-
Hi all, I have implemented Qt's signal and slot here: http://sourceforge.net/projects/javasignalslot/ In case you are wondering what's "Qt's signal and slot", please read http://doc.trolltech.com/3.1/signalsandslots.html My version uses String as sig
-
IMCapture for FaceTime dosen't work with Lion
Since updating to Lion IMCapture no longer works to record FaceTime sessions. Any ideas? Any other products that record FaceTime Sessions and work on Lion?
-
Transferring Photoshop CS4 and Lightroom from Macbook to new Imac
Hello all, I am currently running Photoshop CS4 extended version 11.0.1 and Lightroom version 2.3 on an early Macbook model 1.1, I have the original install disks for Lightroom, but when upgrading to CS4 extended I downloaded the upgrade from the Ado