Chief HR officer not showing all employees

Dear Experts,
I have setup HR intelligence and i am having a problem in HR Chief Responsibility. The responsibility is not showing complete employees of the organisation(in Overview). Can anybody help me out on this one.
regards,
Muhammad Noman Shafique

Couple of things I can think of -
#1.If you're looking at headcount under a person(manager), make sure all the employees under him have the supervisor data.
Even if one link is broken in the hierarchy, it might not give you the correct headcount.
So just check all the employees whi have no Supervisor and update them.
#2. Same with Location. If you're looking at the employee count per location, make sure the value is populated for all employees.
All the data you see in the Dashboard comes from HRI% views
select * from all_views
where view_name like 'HRIBG%';
select * from all_views
where view_name like 'HRI%';
So you can check the appropriate View and see why the view is not returning data.
Sorry mate, cant be of more help.. Not sure why it isn't showing the data..
Cheers,

Similar Messages

  • Outlook Client not showing all emails

    Hi,
    We have signed up for emails on domains.live.com for the domain name kamtress.com 
    We setup Outlook clients in our office using IMAP.
    But the outlook client does not show all emails and also shows lots of copies of sent emails while we would have sent only one.
    Could you please help us out with this issue as to how this can be rectified?
    We use Outlook 2013 on Windows 7.
    Thank you.

    Hi,
    First of all, please make sure your Outlook is fully patched.
    Then, please log on your web mail and check if you can see all your emails. If so, please open your Outlook, go to File > Info > Account Settings > Account Settings > Highlight your Imap account and click
    Change > in the Change Account wizard, check how you set the 'Mail to keep offline' slider. Change it to
    All and then check if you can see all your emails in Outlook now.
    If problem persists, please try to create a new mail profile in Control Panel and set up your IMAP account in the new profile to check if it helps. To configure an email account via IMAP, please refer:
    http://support.microsoft.com/kb/829918/en-us
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Address book of my mac does not show all my contacts in iphone. What do i do??

    Address book of my mac does not show all my contacts in iphone. What do i do??

    iCloud, which replaced MobileMe, requires OS X Lion (10.7.5) or higher.  You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac.  First check to see if your system meets the system requirements to upgrade.
    Lion system requirements are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
    If you can run Mavericks, you can download a free upgrade from the Mac App Store.  If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store.  If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
    After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
    Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table.   Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

  • Text Entry Box not showing all text

    I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is.  I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it.  However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published.  It only shows the last few words of the last line at the top of the box.
    Is there something I am missing?  Or, is there an easier/better way to do what I need?
    Thanks

    Hi all
    If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
    When I just plop a TEB on a slide, I get this in edit view:
    During playback it looks like this:
    But if I edit the TEB properties and enable the Show Scrollbar option:
    I get this in the output:
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • Analysis does not show all rows returned by SQL

    Hi.
    OBIEE 11.1.1.7.0
    I have a strange problem.  I have a simple table that should return customer number and sales.  The report will show all of the sales, but it does not show all the customer numbers.  The SQL that OBIEE creates does return all of the customer numbers.  When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
    I guess what I'm looking for is any advice for how to debug this.  I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
    Any suggestions are appreciated.
    Thank you.

    Thank you for your reply.
    New development.  The issue has to do with a descriptor ID column.  The customer number column is a varchar field and I set the descriptor ID column to the column_ID field.  When I remove the descriptor ID setting, I received all custom numbers.

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • Ical not showing all day events in lion osx

    ical does not show all day events

    Hi,
    I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
    1. please update the Outlook client with the latest patches and service packs.
    2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
    3. Start
    Outlook in safe mode to have a try.
    4. Perform a clean boot
    in your Windows for the new machine.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • List view not showing all podcasts

    Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
    Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
    Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
    I'm running iOS 7.0.6 and iTunes 11.1.5

    Hey there sporry,
    It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Restart the app
    Close the app and open it again.
    Restart your device
    Turn the device off and on.
    Update your device software and your apps
    Update your device to the latest version of iOS.
    Update your apps:
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. The updates will download and install.
    You might need a Wi-Fi connection to update some apps.
    Install another app from the App Store
    If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
    Remember to use the same Apple ID that you used to download the app that you're having issues with.
    Reinstall the app
    Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
    Delete the app.
    Press the Home button.
    Go to the App Store and download the app again.
    Wait for the app to download, then open it from the Home screen.
    If the download stops, you can resume it.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • In iphone 4 mobile me calander not showing all events in list view

    i have iphone 4 Mobile me calendar not showing all events in list view where as showing all events in month/day view. why so & how to resolve

    It started about a week ago. The "From" drop-dow is now missing in Mac Mail. It should appear beneath the subject line. I was working with MobileMe Chat support for about 3 hours. They cannot solve the problem and have now escalated it to the "Senior Advisor Team."

  • Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

    Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

    Hi,
    This is because the query is excluding the current site you are trying to modify since it is actually in the report.
    You can include in your query:
    or site_id = :Pxx_SITE_ID
    Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
    Thank you,
    Erick

  • Account Dimension not showing all members in the cube in Analysis Services

    Hi,        
             In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
             The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
    Thanks
    Sharath

    Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
    I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
    In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
    But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
    But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
    By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
    A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
    To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

  • BI publisher report is not showing all the data

    Hi All,
    I have created a report using BI Publisher in R12. The report is not showing all the records.
    I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
    what might be the issue.please give me some idea to resolve this issue.
    Thanks in advance.
    Regards,
    P.Kalidoss

    Hi Arun,
    In the following code: public SelectItem[] getAllPrinters() {
    if (allPrinters == null) {           // allPrinters is not defined. what type of object it is
    PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
    allPrinters = new SelectItem[printers.length];
    for (int i = 0; i < printers.length; i++) {
    SelectItem printer =
    new SelectItem(printers.getName(), printers[i].getName());
    allPrinters[i] = printer;
    return allPrinters;;;
    Variable allPrinters is not defined. what type of object it is?
    And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
    value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
    id="soc1"
    autoSubmit="true">
    <f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
    </af:selectOneChoice>.
    Thanks.

  • IPod touch not showing all music

    My ipod touch is not showing all of my music in 'songs', which I assumed showed all music on the device. I have about 7 Third Eye Blind songs on here and I can find all of them using the 'search ipod' tool, but only 2 of the songs show up in the music app. This is an example. I have about 1000 mp3's on the device but only about 300 or 400 of them seem to be visible unless i do an OS search for the individual file.
    Also, the device is not showing file names correctly. I assume it looks at 'tags' or something for the info. well, this is really annoying. It should show the file name because sometimes i rename files to find them easier.

    I think I at least know now why music isn't showing up. It looks like the songs not showing have id3 v1 tags in the file. I'm using mp3tag to batch convert all songs to id3 v2.3.
    Nice to know i've gone all this time without hearing a large percentage of my music.
    I say either develop better software for detecting ALL mp3 music or get rid of this stupid 'tag' thing altogether. I highly doubt the latter is possible, so..

Maybe you are looking for