Child CMP local object not getting refreshed with parent entity information
Hi,
I have a container mnaged relatioships (example) between Emp and Dept entities. I have generated their DTO and using them to tranfer data across layers.
I am updating deptno CMP field of EMP entity and returning the Entity DTO. When extracting dept information like empLocalDTO.getDept_Deptno().getDname(), it's returning old department name.
Can anybody help in resolving this problem of DeptLocal object not getting updated when setting deptno on EmpLocal entity?
Session Bean updateEmp method code:
EmpLocal local = (EmpLocal) getEmpLocalHome().findByPrimaryKey(dto.getEmpno());
local.setDeptno(dto.getDeptno());
local.setSal(dto.getSal());
local.setJob(dto.getJob());
EmpLocalDTO eDTO = new EmpLocalDTO(local);
Servlet Code:
localDTO = empLocal.updateEmp(localDTO);
out.println("Dname : " + localDTO.getDept_deptnoDTO().getDname() + " <BR/>");
Thanks
I haven't personally seen this but Daniele Grandini in his article states:
- The
ICMP latency between the Management Server and the Domain Controller is above 150 msec (this is no fixed rule)
- This specific issue manifest itself when the Active Directory lookup takes more than 1000 msec (more or less);
If the agents have been green (healthy) intermittently then it suggests that it is not a configuration issue as such with the agent but some sort of communication \ authentication issue. And that suggests you are seeing the same issue .. at present there
isn't a straight forward workaround as you can't force the agents to use certificates to get around the problem.
The notes at the bottom of Daniele's article are not promising - http://nocentdocent.wordpress.com/2012/10/26/opsmgr-2012-agents-across-slow-wan-links-are-unable-to-communicate/
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/
Similar Messages
-
Jsf page not getting refreshed with updated values?
Hi All,
- managed-bean - session scope.
- On a request, Even though, I am updating the bean's properties(values), my Jsf page is not getting refreshed with updated values as it is displaying the older values.
Can anybody throw some light?
Thanks in advance.
- SriPlease try to give us more information, follow BalusC suggestion.
For this moment I only can say you that the more common cause to this problem (in my expirence) is that you have problems with your conversion/validate phase. -
ADF Struts : Form not getting refreshed with new values
I have a view object based ona entity object. It has an additional attribute(calculated attribute) selected from some other table. In my browse page, I click on edit button and change the calculated attribute in the edit page and comeback to the browse page. In the browse page, the changed calculated attribute is not getting reflected. however the database has the changed value. Now, if I query the same browse page in a different browser window, it shows the changed value. But, still the original browser window shows the unchanged value only(even after refreshing the browser). So, this is server caching. Why is the application module not refreshing the bindings? What should be done to achieve the bindings refresh?
Did you look at:
http://radio.weblogs.com/0118231/stories/2005/06/16/whyIsntRefreshingTheBrowserPageEnoughToRefreshTheDataDisplayed.html -
Toplink Cache not getting refreshed after executing UpdateAllQuery
After executing UpdateAllQuery, the records in the database are getting updated, however the Toplink cache is not getting refreshed with the new data, it still has stale data which is causing issues.
We're also setting
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
Thanks.Toplink version is 10.1.3.0.0
Here is the code
UpdateAllQuery updateQuery = new UpdateAllQuery(RegisterImpl.class);
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
ExpressionBuilder registerBuilder = updateQuery.getExpressionBuilder();
updateQuery.addArgument("userIdArg");
updateQuery.addArgument("channelArg");
updateQuery.addArgument("tokenArg");
updateQuery.addArgument("dateArg");
updateQuery.addArgument("businessFuncIdArg");
Expression reservedDetailRegExp = registerBuilder.get("reservedDetail");
// build expressions
Expression userIdExp = reservedDetailRegExp.get("userId").equal(
registerBuilder.getParameter("userIdArg"));
Expression channelExp = reservedDetailRegExp.get("channel").equal(
registerBuilder.getParameter("channelArg"));
Expression tokenExp = reservedDetailRegExp.get("token").equal(
registerBuilder.getParameter("tokenArg"));
Expression dateExp = reservedDetailRegExp.get("date").equal(
registerBuilder.getParameter("dateArg"));
Expression busFuncExp = registerBuilder.get("businessFuncId").equal(
registerBuilder.getParameter("businessFuncIdArg"));
// set selection criteria
updateQuery.setSelectionCriteria(userIdExp.and(channelExp.and(tokenExp.and(dateExp
.and(busFuncExp)))));
// substitute the values
updateQuery.addUpdate(reservedDetailRegExp.get("userId"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("channel"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("token"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("date"), "");
updateQuery.addUpdate(registerBuilder.get("businessFuncId"), "");
In the object model for the query, the RegisterImpl has an aggregate mapping (ReservedDetail), which in turn has a number of direct-to-field mappings and an one-to-one mapping to businessFunction (for our query we use a direct query key "businessFuncId") -
Cell data not getting refreshed in which user enters data OO ALV(editable)
Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
FOR obj_alvgrid1.
METHODS: handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed
e_onf4
e_onf4_before
e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid TYPE char1,
v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
LOOP AT er_data_changed->mt_good_cells INTO w_good.
v_index = sy-tabix.
CASE w_good-fieldname.
WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
w_good-row_id TRANSPORTING
zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
SuryaHi Surya,
The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
- GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected] -
Screen 910 getting saved in Local object - not even asking for Package
Hi ABAPers,
I am using Enhancement CONFPP07 and for this created Z project in CMOD.
When I am creating the screen 910 for the screen exit SAPLCORU_S of that Z Project, that 910 is getting created in Local object not even asking for the Package and the request.
I tried to create that screen from the SE80 in the function group XCOF, there also it is getting saved in local object.
I tried to do it from SE51 also, but arrived that screen in the local object only.
Please Suggest me with your valuable comments.
Thanks and Regards
Pinaki MukherjeeDo a version management on the screen and see if it was ever created before and then deleted. If so, reassign it to the package you want.
Rob -
Tree Table is not getting refreshed properly in Jdev 11.1.2.0
Hi,
I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0.
Let me explain you my use case.
I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this selectBooleanRadio component, that treetable node should get expanded and at the same time all the child records(I have a select boolean check box component(transient attribute) at the child level) for that node should get selected. This is to allow user to unselect the child records, which he/she does not want to process further(some functionality).
Now when the user selects any radio button, the tree table node is not expanded, but the arrow beside the radio button for that node can be seen as expanded.
I thought it may be a partial trigger issue, so i tried refreshing the tree table programatically as well. But it was of no use.
Then I set the partial triggers wrt to SelectBooleanRadio component on the parent container of the TreeTable. After which somehow the node got expanded but the tree table shrinks in width and the actual disclosure functionality of a tree table is lost.
The same use case works perfectly fine in Jdev 11.1.1.5.
For reference:
I created a sample test case(Dept/Emp) in jdev version 11.1.1.5, which works fine. Workspace: http://adf-use-cases.googlecode.com/files/TreeTable1.rar
But the same test case, when i created in jdev version 11.1.2.0, gives issues. Workspace: http://adf-use-cases.googlecode.com/files/TreeTableUseCase.rar
If you download the application and run in respective jdev version, you will get to know more about the issue.
Please let me know, If I am doing anything wrong in the implementation of this use case.
Any help/suggestions are appreciated.
Thanks
Umesh
Note: My complete application is in Jdev 11.1.2.0, so I can't degrade my jdev version to 11.1.1.5.Thanks Frank for the reply.
But upgrading the jdeveloper to 11.1.2.2 is not an ideal solution for us now, because of the size of the project.
Some how, the issue of refreshing the tree table is resolved. I am using a command button with clientComponent to true and causing a full page refresh.
I am not sure, if this is a perfect solution.
As you said, that this behavior may be an issue with the Jdev version 11.1.2.0, I am using. I am going with the above said approach. -
ALV tree not getting refreshed
Hi
I have 2 fields A and B in the main screen and a tabstrip with 4 tabs.
Each tab contains a ALV tree
Now when I open the main screen for the first time the ALV tree data is coming properly as per the default values of A and B.
But when I change the values of A or B the ALV tree does not get refreshed. The final table has the changed data but the ALV shows only the old data.
I am doing the ALV tree for the first time in module pool. Please provide some sample code to refresh the ALV tree.
Regards,Hi
Alv tree is now getting refreshed.The subscreen refresh problem is solved
we have to use REFRESH_TABLE_DISPLAY method to do it.
if tree1 is initial
create object
create container
call method set_table_for_first display
else.
call method refresh_table_display.
endif.
Regards,
Mozila -
Data is not Getting refresh in Dashboard
Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
ThanksQaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David. -
Values not getting refreshed in web report.
Hello Friends,
Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
IMS is the combination of all divisions and IMR is the combination of only three divisions.
In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
and using new selection we have restricted the divisions with IMS,IMN,etc.,
IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
IMN... all are with single divisions
Now we have assigned the query in the data provider for select options in hte web report,
But when we select any options the values of the remaining queries are not getting refreshed.
If we use the divisons directly with out using the structures the values are getting refreshed.
Can any one give me the solutions for this?
Regards
SrinivasHi Mansi,
Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
If the solution is not related to your question, please provide more details.
Thanks,
Rajesh -
Panel is not getting refreshed.i see a jam of old and new graph and lines
hi friends
i am attaching my code .when i adjust the slider position the size of the graph will increase(scaling).when i scroll to see the entire graph the screen is not getting refreshed properly.
no leads ..can be 3,12 ...try any arbitary ...(stored in a txt file)
myfile.txt=consider some 600 random numbers for testing.
public class ECGDisplay extends JFrame implements WindowListener
Container contain;
JSlider sliderX,sliderY,sliderCount;
JTextField Xval,Yval,Count;
int [] time=new int[600];
int []Volt=new int[600];
Simpanel[] panelname;
float relX=1;
float relY=1;
LineBorder lineborder,lineborder1;
JPanel ScalingAdjustersPanel,ECGDisplayPanel;
JScrollPane Scroll;
JViewport vp;
JRadioButton RbX,RbY,RbCount;
ButtonGroup group;
private FileInputStream in;
String horizontalScalingSliderLabel = "mm/S";
String verticalScalingSliderLabel = "mm/mV";
String heightOfTileSliderLabel ="Height of tile in uV";
boolean flag=false;
int LeadCount;
int x=20,y=15;
int count=4;
JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
java.awt.Dimension screen = java.awt.Toolkit.getDefaultToolkit().getScreenSize();
public ECGDisplay()
super();
this.setTitle("ECG FRAME");
this.addWindowListener(this);
this.setSize (screen.width, screen.height);
contain=getContentPane();
EcgLeadCount();
EcgWindowCreation(LeadCount);
void EcgLeadCount( )
try
FileInputStream in = new FileInputStream("no_Leads.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(in));
LeadCount=Integer.parseInt(br.readLine());
in.close();
catch (Exception e)
System.err.println ("Error while reading no of leads");
void PanelAdjuster()
for(int i=0;i<LeadCount;i++)
panelname.setPreferredSize(new Dimension((30*x),(count*y)));
void readMyFile(int i)
try
FileInputStream in = new FileInputStream("myfile.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
for (int j = 0; j < Volt.length; j++)
Volt[j] = Integer.parseInt(br.readLine());
in.close();
catch (Exception e)
System.err.println ("Error writing to file");
public void EcgWindowCreation(int LeadCount)
for(int i=0;i<600;i++)
time[i]=i;
ScalingAdjustersPanel=new JPanel();
ECGDisplayPanel=new JPanel();
panelname=new Simpanel[LeadCount];
for(int i=0;i<LeadCount;i++)
panelname[i] =new Simpanel();
System.out.println(panelname[i]);
readMyFile(i);
ECGDisplayPanel.add(panelname[i]);
ScalingAdjustersPanel.setPreferredSize(new Dimension(200,(screen.height-50)));
ScalingAdjustersPanel.setLayout(new BoxLayout(ScalingAdjustersPanel,BoxLayout.Y_AXIS));
ECGDisplayPanel.setLayout(new BoxLayout(ECGDisplayPanel,BoxLayout.Y_AXIS));
sliderX=new JSlider(10,50,20);
sliderY=new JSlider(15,50,15);
sliderCount=new JSlider(4,10,4);
ScalingAdjustersPanel.add(sliderCount);
sliderCount.setBorder(BorderFactory.createTitledBorder("uV"));
sliderCount.setMajorTickSpacing(2);
sliderCount.setMinorTickSpacing(1);
sliderCount.setPaintTicks(true);
sliderCount.setPaintLabels(true);
sliderCount.setVisible(false);
sliderCount.addChangeListener(new SliderChange());
ScalingAdjustersPanel.add(sliderX);
sliderX.setBorder(BorderFactory.createTitledBorder(horizontalScalingSliderLabel));
sliderX.setMajorTickSpacing(10);
sliderX.setMinorTickSpacing(5);
sliderX.setPaintTicks(true);
sliderX.setPaintLabels(true);
sliderX.addChangeListener(new SliderChange());
sliderX.setVisible(true);
ScalingAdjustersPanel.add(sliderY);
sliderY.setBorder(BorderFactory.createTitledBorder(verticalScalingSliderLabel));
sliderY.setMajorTickSpacing(10);
sliderY.setMinorTickSpacing(5);
sliderY.setPaintTicks(true);
sliderY.setPaintLabels(true);
sliderY.addChangeListener(new SliderChange());
sliderY.setVisible(false);
RbX=new JRadioButton ("horizontal Scaling",true);
RbY=new JRadioButton ("vertical Scaling");
RbCount=new JRadioButton ("height Of Tile");
group=new ButtonGroup ();
group.add(RbX);
group.add(RbY);
group.add(RbCount);
ScalingAdjustersPanel.add(RbX);
ScalingAdjustersPanel.add(RbY);
ScalingAdjustersPanel.add(RbCount);
RbX.addActionListener(new buttonSelected());
RbY.addActionListener(new buttonSelected());
RbCount.addActionListener(new buttonSelected());
lineborder = new LineBorder(Color.GRAY,2,true);
lineborder1 = new LineBorder(Color.RED,2,true);
ScalingAdjustersPanel.setBorder(lineborder);
JScrollPane Scroll=new JScrollPane(ECGDisplayPanel);
contain.setLayout(new BorderLayout());
splitPane.setOneTouchExpandable(true);
splitPane.add(ScalingAdjustersPanel);
splitPane.add(Scroll);
contain.add(splitPane,BorderLayout.CENTER);
setVisible(true);
public void windowClosing(WindowEvent evt)
this.setVisible(false);
this.dispose();
public void windowOpened(WindowEvent evt) {}
public void windowClosed(WindowEvent evt) {}
public void windowIconified(WindowEvent evt) {}
public void windowDeiconified(WindowEvent evt) {}
public void windowActivated(WindowEvent evt) {}
public void windowDeactivated(WindowEvent evt) {}
public class SliderChange implements ChangeListener
public void stateChanged(ChangeEvent AE)
Object sliderOBJ=AE.getSource();
if(sliderOBJ==sliderX)
x= sliderX.getValue();
relX=(float)x/20;
else if (sliderOBJ==sliderY)
y= sliderY.getValue();
relY=(float)(((float)y*count)/(15*4));
else if(sliderOBJ==sliderCount)
count=sliderCount.getValue();
relY=(float)(((float)y*count)/(15*4));
PanelAdjuster();
ECGDisplayPanel.repaint();
ECGDisplayPanel.updateUI();
public class buttonSelected implements ActionListener
public void actionPerformed(ActionEvent e)
JRadioButton slid1=(JRadioButton)e.getSource();
if(slid1==RbX)
sliderX.setVisible(true);
sliderY.setVisible(false);
sliderCount.setVisible(false);
if(slid1==RbY)
sliderX.setVisible(false);
sliderY.setVisible(true);
sliderCount.setVisible(false);
if(slid1==RbCount)
sliderX.setVisible(false);
sliderY.setVisible(false);
sliderCount.setVisible(true);
public class Simpanel extends JPanel
public void paintComponent(Graphics g)
g.setColor(Color.BLUE);
for(int i=0;i<599;i++)
g.drawLine((int)(time[i]*relX),(int)(Volt[i]*relY),(int)(time[i+1]*relX),(int)(Volt[i+1]*relY));
Graphics2D g2=(Graphics2D) g;
//drawing a rectangle
double leftX=0;
double topY=0;
double width=x;
double height=y;
g2.setColor(Color.RED);
for(int j=0;j<=count;j++)
for(int i=0;i<30;i++)
Rectangle2D rect=new Rectangle2D.Double(leftX,topY,width,height);
g2.draw(rect);
leftX=leftX+x;
leftX=0;
topY=topY+y;
public static void main(String args[])
ECGDisplay frame=new ECGDisplay();
Edited by: garlapati on Apr 7, 2009 10:18 AMFrom the [custom painting tutotial|http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html]:
Most of the standard Swing components have their look and feel implemented by separate "UI Delegate" objects. The invocation of super.paintComponent(g) passes the graphics context off to the component's UI delegate, which paints the panel's background. For a closer look at this process, see the section entitled "Painting and the UI Delegate" in the aforementioned SDN article. -
Oracle BI Publisher Report from OEM12c data is not getting refreshed...
Hello,
We've integrated BI Publisher with EM12c. I've developed a report which checks a given database extents information (initial, next, maxextents) at tablespace level. The dataset is chosen as EM repository. The report runs absolutely fine until new data is added to a database. For eg, I created a new tablespace. The new tablespace related info is not getting refreshed despite the fact that I've refreshed the data source and checked that the tablespace exists in the database.
Can anyone pls help.
Thanks,
DhananjayDhananjay,
Has the data in the EM repository view been refreshed? The report retrieves data via the published repository views. If the view does not display the latest information, then you will have to wait till the relevant config or monitoring collections are complete. -
Lov command link does not get refreshed
We are using Jheadstart 11.1.1.4.26 with Jdeveloper 11.1.1.4 and we think we have found a bug.
The scenario includes two items, an inputtext (FirstName) and an LovItem (ManagerId)
The LovItem (ManagerId) is dependent on the inputtext (FirstName) with Clear/Refresh and has a Disabled Expession #{bindings.EmployeesFirstName.inputValue==null} so that when the Firstname is null the LovItem (ManagerId) is disabled.
This seems to work fine except from the commandLink of the LovItem which does not get refreshed. This is probably because the Id of the commandLink is not included in the componentsToRefresh item inside the EmployeesFirstNameDependsOnItem.
Of course we could create a custom vm for the default/misc/facesConfig/dependsOnItemBean.vm and pass the id of the commandlink but we are looking for a more generic way.
<managed-bean id="__168">
<managed-bean-name id="__169">EmployeesFirstNameDependsOnItem</managed-bean-name>
<managed-bean-class id="__170">oracle.jheadstart.controller.jsf.bean.DependsOnItemBean</managed-bean-class>
<managed-bean-scope id="__171">application</managed-bean-scope>
<managed-property id="__172">
<property-name id="__173">itemsToClear</property-name>
<list-entries id="__174">
<value id="__175">EmployeesManagerId</value>
</list-entries>
</managed-property>
<managed-property id="__176">
<property-name id="__177">componentsToRefresh</property-name>
<list-entries id="__178">
<value id="__179">EmployeesManagerId</value>
</list-entries>
</managed-property>
</managed-bean>
I sent a testcase to '[email protected]' last friday.
Regards
VasileiosVasileios,
Thank, I was able to reproduce this. We will fix it in the next release.
Here is how you can fix it using custom templates:
- add the following macro to your custom macros file:
#macro (ITEM_LINK_PARTIAL_TRIGGERS)
partialTriggers = "#foreach($item in $JHS.current.item.dependsOnItems) #if (($JHS.current.pageComponent.hasOverflowRight || $JHS.current.pageComponent.hasOverflowRightWithSplitter || $JHS.current.pageComponent.hasOverflowBelow || $JHS.current.pageComponent.hasOverflowBelowWithSplitter) && $JHS.current.item.displayInTableOverflow && !$item.displayInTableOverflow)${JHS.current.group.shortName}PC:${JHS.current.group.shortName}Tab:#end${item.id}#end" #end
- in the custom formLovItem and tableLovItem templates, add this macro to the commandLink element:
<af:commandLink immediate="true" partialSubmit="true" #ITEM_DISABLED_IN_FORM() #ITEM_UPDATEABLE_IN_FORM() id="#NEW_ID("cl")" #ITEM_LINK_PARTIAL_TRIGGERS()
Steven Davelaar,
JHeadstart team. -
DDocType meta filed not getting refreshed
Not sure what could be the cause for this. I added some values for dDocType meta data fleld. The values are not getting refreshed. I restarted the server removed browser cookies but still the doct types I see is old. I checked the database to see if the table is updated with values. The values in the table are correct. What could be the reason for dDocTypes not showing the latest entries?
Regards,
PratapThis sounds familiar, I think I solved it by just restarting the browser.
Also check that you're not using pre-defined values for your rules. -
Revision: 14595
Revision: 14595
Author: [email protected]
Date: 2010-03-05 01:25:04 -0800 (Fri, 05 Mar 2010)
Log Message:
Metadata refactoring revision: having LayoutMetadata return a NullMetadataSynthesizer so that child layout settings do not get copied to their parent.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutMetadata.asI've only encountered two instances where the PUT operation failed on certain files. One, the server does not like the particular file type, and two, when the file was open in another program.
Other than that, I could only guess that it may have something else to do with the web server configuration and not DW.
Maybe you are looking for
-
How do I select a date column and display the millesecond along with it.
I am trying to select a date column from database and want to display millesecond with it. How do I do this. I am aware of the "alter session set NLS_DATE_FORMAT = 'MM/DD/YY HH:MI:SS'" command. However, I do not know how to display this with the mill
-
Hi all, I am having a problem with opening downloaded files. I downloaded the windows media player for mac os from the microsoft website. The players icon is on my desktop. How the hec do I run it?? When I doubleclick on it it says script editor cann
-
Problem in Technical System Creation Wizard in Portal SLD
Hi When I am trying to Create New Technical System for WEB AS ABAP, I am getting the following error at the Installed Production phase in the Portal SLD *CIM_ERR_FAILED: Unable to execute createInstance() request, exclusive write mode is enabled* Pl
-
PLEASE HELP - I have stupidly deleted the apple application support off my computer, and I am unable to launch my Itunes..It advises me to download itunes again, however i am TERRIFIED to do so because I have over 5,000 songs in my Library and no dou
-
I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw