Child domain not available when creating new mailbox in Exchange 2010

I’ve
installed Exchange 2010 in my environment with a single existing Exchange 2003
server. All current mailboxes are on the child domain. We have 1 root domain
(rootdomain.com) and 1 child domain (child.rootdomain.com). Currently,
we're in the coexistence phase and mailflow is working as expected. Today,
I created a new mailbox using EMC on Exchange 2010 and noticed that the
child domain is not available. Only the root domain is available?
Hopefully, I do not need to reinstall Exchange 2010. How do I go about adding
the child domain?

Did you domain prep the child domain?
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
From a Command Prompt window, run one of the following commands:
Run setup /PrepareDomain or setup /pd to prepare the local domain. You don't need to run this in the domain where you ran Step 3. Running
setup /PrepareAD prepares the local domain.
Run setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Run setup /PrepareAllDomains or setup /pad to prepare all domains in your organization.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

Gmail account not available when creating new event

Good evening all,
I have not seen this issue reported yet, so I thought I would throw it out there in case someone else has encountered it.
I set up my GMail account (email, contacts and calendar) and am able to get my events via CalDAV. I can also set it as the default calendar when creating events. However, when I actually open the calendar to create an event, when I first touch the calendar it shows as the colour of my Gmail calendar, second touch opens the edit screen and my Gmail account is not there. If I save the event, it gets added to the local calendar.
I have 3 calendars outside of the local calendar - a work one via ActiveSync, my Gmail one and another Gmail one added as CalDAV which is my wife's Gmail calendar - this one shows as available in the drop down, but not my Gmail one. The descriptions are unique.
I did have to remove my Gmail calendar due to the "unable to authenticate" issue that others noted, so I don't know if that has anything to do with it. As I stated, it is pulling things down, is available to set as default, but no created events can be associated with it.
-m

Hello ironmike and welcome to the BlackBerry Support Community Forums.
To make sure I understand the issue, you removed your Gmail account from your device as were getting an error "Unable to Authenticate". But, when you go to your Calendar and tap on an entry, it shows the colour of your Gmail account and when you go to edit the appointment, it uses the Local calendar to save the appointment and not Gmail?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I can not save when creating new location i see this error

I CAN N'T SAVE when creating new location i see this error
hi all
when log in to hr responsability and go to location and want to create new location i fil all mandatorey data
and when save new location it can n't save and this error appear below in the tolbar
FRM-40735:ON-INSERT trigger raised unhandled exception ORA- 29273.
have any one can help me to solve this error
my application details
apps 12.1.1 vision instance in hr responsability
also the same error when crating the location in payables respobsability

To implement the solution, please execute the following steps:
1. Go into the responsibility: System Administrator
2. Navigate to Profile > System.
3. Clear the value at the Site level for the profile option IRC: Geocode Host.
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.
Edited by: 793535 on Sep 23, 2010 3:35 AM

Error when Creating new Mailbox - PowerShell - Storage Error

Hi Guys,
I have been working on a new exchange install and when I try to create a new mailbox or new mailboxdatabase I keep getting the following error.
WARNING: The cmdlet extension agent with the index 0 has thrown an exception in OnComplete(). The exception is:
System.TypeInitializationException: The type initializer for
'Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary' threw an exception. --->
System.NotSupportedException: Not supported field(MailEnabled)
type(Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition).
 at
Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary.PropertyDefinitionSets.BuildWellKnownSets()
 at Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary..cctor()
 --- End of inner exception stack trace ---
 at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.TryFindEquivalentDefinition(PropTagKey key, Boolean
isCustom, PropType type, TypeCheckingFlag typeCheckingFlag, PropertyTagPropertyDefinition& definition, Boolean&
createNewDefinition)
 at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.InternalCreate(String displayName, PropTag
propertyTag, PropertyFlags flags, TypeCheckingFlag typeCheckingFlag, Boolean isCustom, PropertyDefinitionConstraint[]
constraints)
 at Microsoft.Exchange.Data.Storage.PropertyTagCache.InternalPropertyDefinitionsFromPropTags(TypeCheckingFlag
propertyTypeCheckingFlag, MapiProp mapiProp, StoreSession storeSession, PropTag[] propTags, Int32&
resolvedPropertyCount)
 at Microsoft.Exchange.Data.Storage.RecipientTable.GetRecipientPropertyDefinitionsFromMapiTable(Boolean&
originalColumnsChanged)
 at Microsoft.Exchange.Data.Storage.RecipientTable.BuildRecipientCollection(Action`2 recipientCollectionBuilder)
 at Microsoft.Exchange.Data.Storage.CoreRecipientCollection..ctor(ICoreItem coreItem)
 at Microsoft.Exchange.Data.Storage.CoreItem.Microsoft.Exchange.Data.Storage.ICoreItem.GetRecipientCollection(Boolean
forceOpen)
 at Microsoft.Exchange.Data.Storage.CoreItem.GetRecipientCharsetDetectionData(StringBuilder stringBuilder, Boolean
isComplete)
 at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.BuildCodePageDetector(MemoryStream& cachedHtmlBody)
 at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.DetectCpidWithOptions(Charset userCharset, MemoryStream&
cachedHtmlBody)
 at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.SetCachedBodyDataAndDetectCharset(Char[] cachedBodyData,
Charset userCharset, BodyCharsetFlags charsetFlags)
 at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CalculateCharset()
 at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.OnBufferFull()
 at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CloseDetectorConversionStream()
 at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.Flush()
 at Microsoft.Exchange.Data.TextConverters.ConverterEncodingOutput.Flush()
 at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Run()
 at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Flush()
 at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Flush()
 at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Dispose(Boolean disposing)
 at System.IO.TextWriter.Close()
 at Microsoft.Exchange.Data.Storage.BodyTextWriter.<CloseWriter>b__11()
 at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, LocalizedString
exceptionString, CtsCall ctsCall)
 at Microsoft.Exchange.Data.Storage.BodyTextWriter.CloseWriter()
 at Microsoft.Exchange.Data.Storage.BodyTextWriter.Dispose(Boolean disposing)
 at System.IO.TextWriter.Dispose()
 at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data,
LogMessageDelegate logMessage)
 at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
 at Microsoft.Exchange.Provisioning.ProvisioningLayer.OnComplete(Task task, Boolean succeeded, Exception exception)
Does anyone have any idea what is causing this, the server is running Microsoft Exchange 2010 SP2. I don't want to complete an upgrade to SP3 until I have got this issue resolved first.
Any suggestion are welcome.
Kind Regards
TPark IT Technician

In terms of what's causing it, the clue is in the stack above.
its one of the cmdlet extension agents. Which one? Well the one at index 0
Run this, and you should find its the Mailbox Creation Time Agent
Get-CmdletExtensionAgent | select Name, priority
Get-CmdletExtensionAgent | select Name, priority
I'd then run Test-Servicehealth to check services are all responding.
Can you post the exact command you are running to get this?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
 Facebook:
 XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Design mode not available when creating or opening a php file - CS5

I am not sure if this is a bug or not. When I create a new php file, it opens in code view. The options to view in design or code and design mode are disabled. If I reset the workspace, does not matter which workspace I am in at the time, then the file is displayed in code and design mode but the options to view in design or code and design are disabled.
If I select code view mode, the design view disappears (as expected) but there is no way to get to design or code and design without resetting the workspace.
Is this considered normal operation? The help system does not hint that there is a restriction on view modes for a PHP file.
Thanks
Walter

Hi Walter,
my DW opens always in that mode which I last worked in with a file and then closed DW. Did you already try this (tranlated from German DW):
Preferences> General> Open new document at startup.
Hans-G.

Goods recipient field not available when creating a service purchase req

We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P. The release strategy would use the requisitioner and goods recipient fields to determine the release group. The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated. It is greyed out. I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered. Is there a way to allow this field to be populated? I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy. We are not using workflow so that is not an option. Any suggestions would be appreciated.

Srinivas, I appreciate the response but the requisitioner field is not the problem. I can set that field to mandatory. The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req. The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable. Is there a way to populate this field when the item category is D?

Fields in Field Catalog not available when creating condition table

I see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
Please let me know what I am missing here.
Any insight on this would be really helpful. Thanks guys!

you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
Hope this helps. Hope i havent misunderstood your query.,
Regards
Sai

Hyperlinks not converting when creating a pdf from Word 2010 to Adobe Acrobat 11.0.6

First off, let me say that these are not table of contents hyperlinks. I have created a document in Word 2010 (not a MAC) with hyperlinks to files residing on our company's intranet. In Word the hyperlinks work great but when I create the pdf, the links do not work. I have converted using both PDFMaker from Word and Create a pdf from within Acrobat. Yes, I have all the boxes checked regarding saving links. The links appear to work partially. Meaning that when I hover the cursor over the link, the pointy finger appears but when I click I get a pop-up message telling me the file could not be opened. Also, when I hover over the hyperlink, the address appears. So, I think it knows there's a link and it tries to open but can't. When I create the file within Adobe the link works - once. When I click on the link I get a pop-up window asking me if I want to save my file before closing. After my response the file closes and the linked file opens. However, when I go back into the file and try the hyperlink again, I get the pop-up telling me the file cannot be opened. HELP! I am at my wits end. After spending hours yesterday trying to research (I think I read every thread related to hyperlinks but I am not using a Mac, table of contents or Adobe 7 around which it seems all the prior questions revolve) and futily creating and recreating the pdf (as if doing the same thing repeatedly would somehow magically work) I am about to give up. This is a document that will be published to our intranet for use by employees which cross-references other documents to which they can refer for additional information. I would prefer to publish a pdf and not a Word document. Any suggestions would be appreciated.

Thanks for your input Bill. I've checked the preferences and "view large images" is turned on. It's not all of the images which are missing, only certain ones do not transfer over to PDF.

File Name not set when creating new file in EP 6.0 SPS20

Hi,
We recently upgraded from EP6 SP15 to SP20. Now when I create a new file or folder in a KM folder, the name that I give for the resource is not taken into account. The display name of the newly created resource will be New Text or New HTML Document or New Folder, etc. Even if I open the Properties and change it there, it is not getting reflected. But if I select Rename from the Context menu and give a new name, it gets set. What could be the problem?
Thanks in advance
Regards
Ranjith

Hi,
It was an issue with the customized PropertiesControl class.
Regards
Ranjith

Reference Guide is not available while creating new contract

Hi All,
I have requirement to change the description of Contract Document Name in order to show naming guidelines as description.
I am unable to RG button at the top when I am trying to create a contract document from Contract documents tab of agreement, So I am unable to see which field is used for name.
If I am doing changes for Contract document page customization then its displayed in contract document page but not in contract document tab of agreement.
Please help me in changing the description in contract documents collection in Agreement.
Regards,
Prabhat

Hi,
As you pointed out correctly, RG is not visible in the scenario when you try to UPLOAD a contract document via the Contract Documents tab.
While you can change the Flyover text of the Description field on the Contract documents UI, you will not be able to change the same for the Description field which shows up when you Upload a Contract document.
I do see that apart from the Effective and Expiration date fields on that page, none other have any hover text at all.
You might want to try the Toolbar Customization technique but the caveat with that will be that anywhere the Description field is referenced across the application, the flyover text on that will change.
Hope others can chime in with their ideas as well.
Thanks,
Vikram Shukla

FCPX not responding when creating new project

My FCPX isn't responding when I'm trying to create and edit a new project. I can create a new event, import a video in but if I try to play it or create a new project to drop it into it stops responding and all I see is the beachball twirling. I need suggestions and fast. Already erased FCP preferences, did the purge script and repaired disk permissions in case it was a RAM issue. No other programs seem to be having an issue.. and I've been using FCPX just fine for 8 months..HELP
Final Cut Pro X, Mac OS X (10.8.5)

Try these general troubleshooting strategies.
Use this free app to trash the preferences even if you have already done it. This should be the first thing you try when any problems occur.
         http://www.digitalrebellion.com/prefman/
Shutdown FCP X before you do it.
2. Trash Layouts folder. With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro . . . trash the Layouts Folder.
3. Open Disk Utility and Repair Permissions.
4. Trash FCP X using this free app and reinstall it.
      http://www.digitalrebellion.com/fcsremover/
5. If these 4 measures don't work, create a new User Account (Admin) in System    Preferences and try running FCP X from that as it sometimes works miracles.

Data target is not available when creating an info package in BW

Hi,
I am not sure how, but I have accidentally deleted the info packages for one of the info sources. I have created init package successfully, but when I try to create a delta info package for the data mart, the data target( which is an info cube) is not appearing in the data target tab.
Any help in this issue is higly appreciated.
Thanks
Prashant

PRASHANT ASOPA , did you find a solution to this - I am facing a similar situation! I have tried almost everything including deleting and recreating the update rule, recreating the export datasource, activating everything a couple of times and of course cretaing and deleting info packages, but no matter what I do I can't get the system to recognize the data target.
The "funny" thing is that everywhere else, even in the "Show data flow" everything looks right!

Exchange 2010 Unable to create new mailboxes through provisioning

Recently I started noticing that when attempting to create a new mailbox in Exchange 2010 I was receiving the error "Load balancing failed to find a valid mailbox database". I checked the provisioning by running the command "Get-MailboxDatabase
| ft Name,IsExcludedFromProvisioning". All my databases are set to "true". All I would have to do is run the command "get-mailboxdatabase | set-mailboxdatabase -isexcludedfromprovisioning $false" to enable the provisioning again. My
question is here, does this require any kind of reboot or setting the DAG into maintenance mode? These are prod servers and I would hate to run a command that might cause an unplanned downtime of any sort. I got a feeling that this is probably a quick simple
command and wont cause any issues, just want to confirm that this won't require any sort of planning before running.

No, you don;t have to restart the server or make any changes in DAG.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Move mailbox from exchange 2010 2003 , Transient error MapiExceptionLogonFailed has occurred.

We are currently migrating from Exchange 2003 to Exchange 2010, same domain.
We have successfully moved some mailboxes from exchange 2003 to exchange 2010 without any problems.
Now we need to move 1 mailbox back from exchange 2010 to exchange 2003.
After creating the moverequest it stucks on 0% and the log shows the error below.
After using Bing I found this post -> http://social.technet.microsoft.com/Forums/exchange/en-US/ef41ae05-8816-4c0c-968a-c48f0e3d50b5/move-mailbox-back-from-exchange-2010-to-exchange-2003-failure?forum=exchangesvrdeploylegacy
This suggest ->
After I give FULL permissions to each Mailbox Stores on Exchange 2003 server, I was able to move my mailbox back onto the Exchange 2003 server. In details:
Simply right click Storage Group\Mailbox Store and go to Security, in there you may see Exchange Servers group already there, if no add it in, then give it FULL permissions! and thats it!
Create a new move request but still stuck on 0% and error as below
20-3-2014 16:32:10 [ex2010p11] 'contoso.com/Users/exadmin' created move request.
20-3-2014 16:32:11 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'exchangep21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:11 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:11 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:11 [ex2010p21] Request processing started.
20-3-2014 16:32:11 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (1/60).
Error details: MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: ex2003
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 56583
Lid: 52487 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo,
WindowsIdentity windowsIdentity, String applicationId)
at Microsoft.Exchange.MailboxReplicationService.MapiUtils.OpenSystemMailbox(Guid mdbGuid, String serverDN, String dcName, NetworkCredential cred, String& systemMailboxDn)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.OpenSystemMailbox()
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.ClearSyncState()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<>c__DisplayClass23.<CleanupOrphanedDestinationMailbox>b__22(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CleanupOrphanedDestinationMailbox(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)
Key: F2FA63B0116C564EA4C598D69786443D9E4FB582FF27D2449142F949D567E1E7E0CA914F6695624C98892FA527AAA91E
SyncStateLength: 0
20-3-2014 16:32:41 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'ex2010p21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:41 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:41 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:41 [ex2010p21] Request processing started.
20-3-2014 16:32:41 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (2/60).

Hello，
When you move mailbox from exchange 2010 to exchange 2003, please check if the following situations exist:
http://technet.microsoft.com/en-us/library/dd638157(v=exchg.141).aspx
Before you move mailbox again, please clear the previous move request.
I recommend you use EXBPA to check your exchange server 2003 and exchange 2010.
Please check if inheritable permission is missing on the mailbox store on Exchange Server 2003.
Cara Chen
TechNet Community Support

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

Child domain not available when creating new mailbox in Exchange 2010

Similar Messages

Maybe you are looking for