Child tag initializer for type 'Array' may not be empty?error.

hey,
I imported this file from illustrator into catalyst. WE assume the error is caused by the filters tags but we can't delete them in the code view. The project is unable to run with this error. Is there a way to resolve this?

Hey,
I am also getting this error message and reads: "Errors (1 item) Child tag initializer for type 'Array' may not be empty. There is no way to edit anything in Code view, and I've been working this project for a little while. Imported items from Photoshop CS4. What to do? Thanks.

Similar Messages

Customer for function SP may not have account group in sap

Dear All,
Not open the sales order and error show in SAP
Customer for function SP may not have account group.

In IMG > SD > Basic Function > Set up Partner Determination
Check the assignment of Partner Function with the Account Group in Account Groups - Function Assignment.
Best Regards,
Ankur

Why do I keep getting the "accessory may not be supported" error after updating to ios 7?

Ever since updating to the new ios, my iphone 4 is rejecting every single charger I try to use. All of these chargers are first party apple chargers, and they are all in good shape. Withing seconds of plugging my phone in I get the "this accessory may not be supported" error. Has anyone else had this problem or know how I can fix this? Thank you.

I get the same problem, but my phone still charges, is yours charging after you notice this message?

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
 <echo message="Schema Create for KODO"/>
 <taskdef name="kodo-schematool"
 classname="kodo.jdbc.ant.MappingToolTask"
 classpathRef="jdo.schematool.class.path"/>
 <kodo-schematool action="refresh">
 <config propertiesFile="${zeus.persistence.jdo.properties}"/>
 <fileset dir="${jdo.metadata.dir}">
 <include name="**/*.jdo" />
 </fileset>
 <classpath>
 <pathelement path="${compile.project.class.path}"/>
 </classpath>
 </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

Error optimizing formula for [mbrName]: argument [] may not have size [] in function []

Hi all,
Please help me
I wrote the following script:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> #MISSING)
184 "Commercial income tax" = 1;)
It throws following error:
 Error:Error optimizing formula for [Commercial income tax] (line 182): argument [2] may not have size [-4] in function [@NE] Rule PandL.
What the meaning of these word?
argument [2]
size [-4]
Is there another way of accomplishing the above?

Yeah, Anthony,
I ve just written Calculation Scripts 6 month ago.
Your question: "Commercial income tax" and the "Payment of principal - Short-term" members are Accounts ?
My Answer: Yes, they are.
My full IF statement:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> #MISSING)
184 "Commercial income tax" = 1;
185 ELSEIF ( "Payment of principal - Short-term" == #MISSING)
186 "Commercial income tax" = #MISSING;
187 ENDIF;)
Warning Error:
 Error:Error optimizing formula for [Commercial income tax] (line 182): argument [2] may not have size [-4] in function [@NE] Rule PandL
It is not Error if I write following Script:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> 0 or "Payment of principal - Short-term" == 0)
184 "Commercial income tax" = 1;
185 ELSEIF ( "Payment of principal - Short-term" <> 0 and "Payment of principal - Short-term" != 0)
186 "Commercial income tax" = #MISSING;
187 ENDIF;)

Output could not be displayed (it may not be complete)- Error in MB90

Hi
When I am trying to do Print Preview for a goods receipt document I get the error
Output could not be displayed (it may not be complete)
What could be the error? I havealready checked the settings for the Txn. in IMG.
Regards

Dear AP/Ramesh
I have the settings already inside i.e condition records for both WE01/WE03 and printer settings & assignment of material doc printout in IMG, the output schema does have WE01/02/03 all. When I am running the MB90 Txn, by just entering the output type WE01/03 and the material document year 2009 , processing status 1, I should be able to view all the doc.s which were not printed but I get empty list and I get the message No messages for initial processing exist . After this I did assign the message setting in MB02 by means LP01 & Print with own Txn, now if I run MB90 i do get the Document in MB90 but when I am trying to print preview to view the Stand details in the doc i get the message
Output could not be displayed (it may not be complete) .
Where did i miss?
Regards

Output could not be displayed (it may not be complete) Error in using VF31

Hello Experts,
I am getting an error "Output could not be displayed (it may not be complete)" while using Tcode VF31 for multiple invoice printing , but at the same time when i check the same invoice in VF02 or VF03 i can see print preview, but i m not able to see print preview in VF31 for some paricular invoices only.
what would be the problem ?
This is happening when i use 1 First processing
If i use 2 Repeat processing then i get print preview !
Regards
Edited by: nau on May 15, 2009 5:32 AM

Hi,
According to the basics of the Processing Mode:
01 - Corresponds to the First Processing - wherein only with status 0 and send time 3 are taken into consideration.
02 - Corresponds to the Repeat Processing - wherein a message is only selected if it has status 1 or 2 - irrespective of its send time.
I tried running with '02', it doesn't run, instead the message I got is - "No messages for repeat processing exist".
With this what I can understand is that, the documents which are selected with processing mode '01' are the documents which are not processed yet, with possible status of process as '0'.
When you select '02' mode, it will consider only the successfully processed documents without errors.
This is the basic difference and so you are receiving the message.
Regards,
-Syed.
Edited by: wahid hussain syed on May 15, 2009 12:22 PM

Accessory may not be supported error and charging issues with iphone4

Hello,
From past 2 weeks my Iphone4 (say A) keeps throwing error message "Accessory may not be supported" and doesn't charge the iphone after couple of minutes of charging. This happens when device is connected (for charging) to power outlet or to computer (USB port). I tried multiple original iphone/apple cables. The same cable allows me to copy pictures from this device/Iphone4 when connected to computer via same USB cable, but the device/iphone4 does not charge. The same cable and charger charges my other Iphone4 (say B) perfectly fine.
I am really frustrated as to why this is happening.
Searching on internet, it seems lot of people are facing this problem with their iphones and ipad devices and refer this issue as a software bug, which I also seem to think. How can it be the hardware issue when same charging port and same cables allows you to copy your pics etc. from your iphone device to your laptop but does not allow you to charge the same device? Same charging cable works with my other iphone4 and i tried multiple cables so I dont think it's a cable issue.
Any help is appreciated. I was expecting apple products to be better in quality but lately I have seen this issues quite often.
-RP

Make sure you are using an Apple approved charger and cable. The best would be the charger and cable that came with the iPhone in the original box.

VSH may not load properly - Error message in config file

Hi again,
I use the following eem script to copy the running config to a tftp-server:
event manager applet SAVE_CONFIG_TFTP event cli match "copy running-config startup-config" action 1.0 cli copy running-config tftp://1.2.3.4/SWITCHNAME-eem.cfg vrf management action 2.0 event-default
When I open the config file on the tftp-server with an editior I see the following error message on top of the configuration:
SH may not load properly. (Not enough memory resource)Please check rlimit of your process.Errno: 1; Error string: Operation not permittedTYPE : 3new softlimit bf8c45e8 hardlimit bf8c45ecold softlimit f4240 hardlimit f4240!Command: show running-config!Time: Fri Apr 26 11:21:12 2013version 6.1(3)feature-set fexfeature-set mpls[...]
Besides this message I have not yet seen any negative impact. I googled for the error message and found a Cisco bug CSCsr06310 which should have been fixed in NX-OS 4.0(4)
Anyone an idea what this is about? Is there anything I can do about it?
Regards
Pille

Hi Joseph,
to be honest the negative impact of this error is not big enough to justifiy the effort of opening a TAC case. Thanks for your answer anyway.
Regards Pille

Bound data node Node must not be empty- error

Hi All,
We created a new value node in the context for our data source and set the cardinality to 0..N. We know that we need to initialize and bind this but don't know how so we're getting the erro "bound data node Node must not be empty" when we run the form.
Please help.
Thanks,
Tyken

Hi Jurgen
Were you able to find out the solution for this? I am getting the same error on a much simpler application - I am trying to do the tutorial given on SAP Help Site at
http://help.sap.com/saphelp_nw04/helpdata/en/dc/f1783fe3263042e10000000a114084/frameset.htm
Thanks
Pankaj

Mapping descrete values to childs of a complex type array

Hi all,
I have the following flat XML file with descrete values as source:
<MaterialRequest_MT>
<number>number1</number>
<shortdesc>shortdesc1</shortdesc>
<projectname>projectname1</projectname>
</MaterialRequest_MT>
My problem is how to map this file to the following destination file where the single values of the source file are values of a child element in a list of complex elements:
<ns0:query xmlns:ns0="http://QueryService">
 <ns0:attributes>
 <ns0:item>
 <ns0:key>
 <ns0:system>MP</ns0:system>
 <ns0:name>PartNumber</ns0:name>
 </ns0:key>
 <ns0:value>number1</ns0:value>
 </ns0:item>
 <ns0:item>
 <ns0:key>
 <ns0:system>MP</ns0:system>
 <ns0:name>Description</ns0:name>
 </ns0:key>
 <ns0:value>shortdesc1</ns0:value>
 </ns0:item>
 <ns0:item>
 <ns0:key>
 <ns0:system>MP</ns0:system>
 <ns0:name>Project</ns0:name>
 </ns0:key>
 <ns0:value>projectname1</ns0:value>
 </ns0:item>
 </ns0:attributes>
</ns0:query>
As you see I don't have a source array over which to iterate. This makes it impossible to me to map the source values to the destination items.
Any help is very appreciated!
Thanks!
Denis

Hi
Mapping for item node:
 Create a user defined function with 3 input parameters for number,shortdesc,projectname. In the user defined function check whether each input value exists or not.if the input value exists add the code 'result.addValue("")'.if the 3 input values exist then 3 item nodes will be created.
Mapping for elements
 Create another user defined function with 3 parameter.take the 3 input values same as the above function. Check whether parameter a value exists in the element and write result.addValue(a[0]);Do similarly for b and c parameters. After defining this function add standard node function 'splitbyvalue' and assign to the target.
 USedefined function---->splitbyvalue--
>value.
I guess this solution is a bit complex.....hope it works
regards
Suneel
Message was edited by: Suneel
Message was edited by: Suneel

ITunes for Mac, help may not display subjects.

Most of the time help gives a message, The requested subject cannot be displayed. You must be connected to the internet. Everything else gets the internet okay.
Sometimes restarting iTunes makes it work, often not.
Apple care has no answer for this other than "trash iTunes and install a new copy". Changes nothing.
Mac restart may get it working, or not.
I found that typing a word in the help search box and hitting enter will, most of the time but not always, cause help to display a bar titled Connect to the internet. Click that and subjects will display as they should. So far that has worked every time.
Another thing, when bringing up help from the menu bar, the help window shows a spinner titled "loading help content", or something like that. When it does that, subjects will display. When it doesn't work that "loading" and spinner doesn't show up.
I have two Macs both of which behave the same. iTunes for Windows has not had this problem for me.
Anyone know of a better fix or work around?

Chris CA,
You say:
Your problem is an OS issue (Help) not an iTunes issue.
Post over here ->https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
This solved my question
This helped me
However: All other app help work fine, only having problems with iTunes help.
I spent some time testing them.

Error: Master Copy for Type Definition Could Not Be Found

See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.
Attachments:
untitled.PNG ‏30 KB

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

For loop array index not from 0

HI!
I have an array that is wired into a For Loop. Inside the For Loop there is already a single Array content available as there is this autoindexing feature (?). I do want to change the Array from a certain position different from 0 onwards to the end e.g. change positions 4, 5 and 6 in a for loop executing 3 times. But the for loop and the autoindexing feature start at 0. Can I change this in an elegant way. At the moment I'm running thru the hole array and begin changing at a certain position.

Yes, disable autoindexing on the tunnel and use "index array" inside the loop. Use [n]+4 as index and wire a "3" to the loop count in your particular example.
If you want to keep the entire array and just replace a few elements with updated values, the array needs to be fed in via a shift register. Write the new elements at the desired position using "replace array subset" (see attached very simple example).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ReplaceSomeArrayElements.gif ‏3 KB

Crop to trim: Page size may not be reduced ERROR

I have a client wanting the complete back catalogue of his journal's hi-res PDFs supplied but without the trim marks, printer's info and bleed. This ought to be easy enough - Acrobat will trim a PDF for me and I can automate the process. Except that it won't. I go Documents > Crop Pages... and set all the options for cropping to the Trim Box, but nothing happens. If I try putting in the page size measurements manually, I get the error message 'Page size cannot be reduced'. Seeing as I've arrived via the Crop Pages option on the document menu I can't think I'm in the wrong place. Why won't Acrobat crop my pages?
I'm on Acrobat Pro 9 fully up to date on OS X 10.6.7
Tim
London

I have this exact same question. It simply won't crop.
Why is this bug not being fixed?

Child tag initializer for type 'Array' may not be empty?error.

Similar Messages

Maybe you are looking for