Chinese ADA PDF Not Reading Correctly.

I have a brochure that was originally created in InDesign that I'm trying to make accessible in Acrobat Pro X. When Acrobat "reads" the PDF, it seems to be reading the keystrokes instead of Chinese. I am using Mac OSX. Can this be fixed?

Hi James
Oh~ It perfectly works!!
I've been tried to solve this problem for a long time and
I really appreciate for your help~
Thanks~
Kwangbock.

Similar Messages

Pdf not displayed correctly in preview

We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
The same problem appears on a iPad.
It is not displayed correctly.
In all other programms I tried it is displayed properly.
We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
Is this only a preview problem and should I ignore it?

Hi there,
I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
I would be extremely grateful for some help with this please!
Thanks!

PDF not rendering correctly

Hi
Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
Any ideas how to rectify this?
Is it Adobe related or can I update the settings for the browser? I am using Safari.
Thanks

what OS & Safari version ?
Often, removing any 'pdf' plugins in
/Library/Internet Plug-Ins/
and
~/Library/Internet Plug-Ins/
then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

Mail with image and PDF not displaying correctly on Outlook

Environment and problem
OS X Mountain Lion, Mail 6.1 (everything up to date)
Emails with mixed image and PDF attachments send from my MacBoox Pro are not being displayed correctly when received on Outlook. It is not an Outlook problem.
Multiple inline images - ok
I compose an email, rich text format, insert severnal inline images, send to colleage on Windows 7 using Outlook, all received ok. He sees the message with inline images.
Multiple inline images and PDF - not ok
I compose a similar email with multiple inline images, but attach a PDF. This time all of the attachments (images and PDF) appear at the end of the message when viewed in Outlook.
Gmail browser comparison
I repeat the above from a Gmail account via Safari and I can make an email with inline images and PDF attachments and it works.
Any thoughts, tips, bug reports, etc appreciated.
Jon

No - can't be an Apple fan and then critisise MS for being proprietry
My problem was solved by installing Attachment Tamer.
It could also have been solved by emailing from Gmail directly.
The guys I work with use Outlook and were suprised to see this behaviour.
It's only basic OS X email that has a problem.
I wholeheartedly agree that the standard for emails are not conducive for rich layout control.
But - when my email just has images I had no problems. Take for example the email notifications we're getting from this thread - there are images and layout etc and work fine.
The key feature from Attachment Tamer hints at the problem (and its solution):
send images embedded in HTML layout and safely mix embedded images with other attachments;

Embedded fonts in pdfs not printing correctly

Since updating to 10.5, I've run into a really annoying problem: when printing pdfs, many embedded fonts will not print correctly. Korinna, for example, prints as something totally different. I've tried using both Preview and Adobe Reader, and no luck. Help!

HI William,
Go here for help for Font problems and management in OS X
You may have a duplicate or corrupted font.
Carolyn

Accessible PDF not reading out Loud

After tagging in Adobe InDesign and creating the accessible PDF and running accessiblity full check and document passes.
Adobe Reader automaticly starts reading the cover then on next page its not reading paragraph, but If I select a line it reads that line only.

John,
If the Accessibility Full Check in Acrobat X says everything is fine, then you are all set.
Likely you were already practicing flowing threaded text frames, along with the careful use of paragraph and character styles. If you have also ALT-tagged the images, then you are doing essentially 99.99% percent of what you can do. ALT tagging can be done either in InDesign or after the fact in the Tags panel of Acrobat Pro.
I recommend that you upgrade to Acrobat XI (Acrobat DC is too new to have an opinion on it yet). And if you are going to do a lot of Accessibility fussing, do so on a Windows version of Acrobat XI--it is stabler.
Reading Out Loud is wonkier on the Mac version, for some reason, and is not necessarily the same way a true speech reader would go through the file. OTOH, if you get it to read out loud correctly, and the Tags panel is in the correct flow sequence, then you are fine.

Not reading correctly?

I just got a 4th Gen Nano for Christmas, etc.
I have another video Nano registered to my computer and don't have a problem with it. However, when I plug this new iPod into the USB to register it, nothing happens except a window pops up with the folders/contents of my E: Drive. Apparently it's not reading it correctly, but how can I fix this so I can use my new iPod?
I have the current version of iTunes installed and I'm running on Windows XP.

The problem has something to do with "iPodService Module has encountered a problem and needs to close". I read another thread somewhere about it, but their problem seemed to be stemming from Norton. I'm using avast! antivirus.
I've tried uninstalling/reinstalling iTunes.
I still had no idea what's wrong. .-.

Pdf not loading correctly from Safari

I am having great difficulty, and others it seems, in downloading pdfs. I have a downloadable brochure for school classes as a pdf file, which works in other browsers, but not Safari. Pdf downloads worked fine in Jaguar but not Tiger. The pdf opens in a safari page. How do I access this as a regular pdf?

You want to download the pdf and read it with Adobe Acrobat 7.x, is that right? If so: when you see a file link on a page, look in Safari's >> Window menu for "Activity" and select it for a list of every file on that page. When you see your PDF file, Option + Double click the file name, and it should download, rather than open. This should work for any file listed in Activity. Your Download window will open, and the file will be downloaded to your default download folder, which you have set in Safari menu >> Preferences >> General tab.
There are other, more extreme methods of forcing Safari not to load PDF's, but this is easy and allows you options.

D20 memory not reading correctly. Bios sees only 20 gigs lenovo diagnostic sees 24 gigs

Ok i have a d20 with one set of dimms not reading in the bios. I have tried using all combinations and it always disables one channel of one CPU not reading in the bios but if I use the lenovo diagonstic it sees all the memory and can also run the quick memory test with no errors. I would really like to get all of the slots to work anyone got an answer for this. Thanks for you help in advance.
Mike

I'm assuming you're following the correct DIMM install order based on the service label on the inside cover? The DIMM numbering is non-standard with regards to the location.
If you think you've narrowed it down to a specific DIMM slot (or pair of DIMM slots), I'd try booting the system with memory ONLY installed in that slot (or slots). Obviously it's not the recommended fill order or anything, but it could be a good test to see if you possibly have a damaged slot or something.
Also, have you been messing with the CPUs at all? Though unlikely, I would guess it's possible that a specific CPU pin in the socket could be damaged as well.

970A-G45 with latest Bios not read correctly By Amd Overdrive

System is as follows
Motherboard: 970A-G45 Bios is now 1.61 all have been tried
CPU: AMD FX 8120
Memory: AMD Performance Edition 1600MHz 8 gbyte
PSU Corsair GX600
problem is that AMD BEMP profiles are grayed out,With this processor and memory the BEMP profile should be available both AMD and Patriot the makers of the memory say the problem is the bios not being read correctly by AMD overdrive.Now how do we get a bios release that will be correctly read by AMD Overdrive.here are pics of cpu-z and AMD overdrive BEMP.
I used the instructions posted here but the image in the instructions doesn't show either
http://img593.imageshack.us/img593/6560/cpuz1x.jpg
http://imageshack.us/content_round.php?page=done&l=img651/1912/cpuz2j.jpg
http://imageshack.us/content_round.php?page=done&l=img41/2338/amdoverdrivebemp.jpg
ok the links work now had to resize images

Does AMD overdrive start and work on your system, besides the BEMP thing: yes!, so that is not the question or problem here.
Do you have the hardware components that are needed to support BEMP: NO!
Quote
AMD Black Edition Memory Profile –feature is available with the following, validated memory modules:
Vendor: Part #: Supported CPU Models:
Corsair CMD4GX3M2B1600C8 965BE (C2), 955BE, 720BE
Corsair CM3X2G1600C6GT 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2A1600C6 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2B1600C7 965BE (C2), 955BE, 720BE
Mushkin 996657 965BE (C2), 955BE
Mushkin 996601 965BE (C2), 955BE
OCZ OCZ3BE1600LV2G 965BE (C3), 955BE
OCZ OCZ3BE1600C8LV2G 965BE (C3&C2), 955BE
Patriot PGS34G1600LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1600ELKA 965BE (C3&C2), 955BE
Patriot PGS34G1333LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1333ELKA 965BE (C3&C2), 955BE
In addition the system must meet the following requirements in order to enable the Black Edition Memory Profile feature:
790FX, 790GX or 790X AM3 motherboard with BEMP compatible BIOS revision
AMD Phenom™ II AM3 Black Edition CPU
In any case, this is a pointless discussions. I point to the specific parts on the AMD site that have to do with "BEMP" and you ignore that and point to AMD Overdrive stuff, which not necessarely includes BEMP support unless the hardware conditions are properly fullfilled.
Contact:
- AMD Support
- MSI Technical Support
... and Patriot support, this time mentioning that your neither have a "790FX, 790GX or 790X AM3 motherboard" nor an "AMD Phenom™ II AM3 Black Edition CPU".

I've had several problems with pdfs not viewing correctly in ff-- how can we fix it?

on two seperate occasions, pdfs are rendering completely wrong within firefox (fine in other browsers and when the mozilla pdf is disabled).
in the first one, the color rendering is completely wrong. the background is navy blue and showing up as bright pink- http://imgur.com/J2se8rs
in the second instance, the content is pushed to the right and their is a white bar on the left. http://imgur.com/k8WruXA
we dont want users to have a bad experience viewing our pdf's so please advise if there is anyway i can troubleshoot.

that solution will just fix the problem for me-- i want to fix the problem globally. we are sending this link to clients and it looks like we messed up making the pdf. is there anyway we can fix the pdf so no one using ff gets this bad looking pdf?

Small size file can not read correctly on other linux

Hi, I am running archlinux 0.8 on my laptop, and there is another linux runs kernel version 2.6.20 with root filesystem of debian v3.1.
I wrote a shell script which reads a small, 49 bytes, only 1 line conf file on my archlinux, it works fine.
But if I copy script & conf files to debian, the script can not read conf file with:
while read f;do; echo $f; done < conf
but `cat`,`more` commands can read it. I have to open conf file with vi on debian and do nothing but :wq rewrite it to make script working.
Both arch & debian use ext3 file system. Could anyone tell me why? thanks.

I think your command is wrong: it works with zsh and doesn`t work in bash. Maybe you should remove extra ';'?
while read f;do echo $f; done < conf

Some of Chinese character is not displaying correctly in PDF output

Hi all
I'm involved in the 1st Peoplesoft project in Korea and having a difficulty with displaying Chinese character in PDF output.
Usually Koreans can translate their name in Chinese and that Chinese name is displayed in personal information in their company as well as Korean name.
With Oracle BI Publisher I made rtf template that includes employees' Chinese name and tried to export to PDF output.
Most of Chinese character was fine but '李' character that was ok in HTM output was crashed in PDF output.
So I researched and tested some solutions.
Here's what I did.
I downloaded and installed five fonts(ALBANWTS.ttf, ALBANWTT.ttf, ALBANWT.ttf, ALBANWTK.ttf, ALBANWTJ.ttf) in client machine(c:\windows\fonts\) and did mapping job with xdo.cfg configuration file.
After that I previewed PDF output in the rtf template and checked embeded fonts in the PDF file.
I can see the newly installed font was embeded but still '李' character is crashed.
My problem is little bit different from others becuase only one Chinese character is crashed by for now.
The Chinese character '李' is very common last name in Korea and I believe Simplified Chinese character font have in it.
Please let me know if you have any solutions or experiance.
Thanks and best regards
Kwangbock.

Hi James
Oh~ It perfectly works!!
I've been tried to solve this problem for a long time and
I really appreciate for your help~
Thanks~
Kwangbock.

Pdfs are not reading correctly

I use indesign and illustrator CS6 and when I write a pdf my client says its showing up as funky black and white and not color. Is there something wrong with my software?

Also, how are you creating the PDF. I am assuming it is from ID that has included graphics from Illustrator, but did you use the Illustrator tools or print to the Adobe PDF printer (the Acrobat tool)? What options did you select on the creation tool?

Adobe reader/pdf not transfering correctly

when i scan to emal back any type of PDF file from
printer to LP, it opens up for
view, but as a solid Grey blank screen.
I went to ADD or REMOVE in hoping to CHANGE to make it work
and ended up stopping.
HELP!

Are you sure that Firefox isn't using the integrated PDF viewer (pdfjs)?
Current Firefox versions have enabled a new build-in PDF Viewer and that viewer doesn't have all the features that the Adobe Reader has.
You can change the action for Portable Document Format (PDF) from Preview in Firefox to use the Adobe Reader or set to Always Ask in "Firefox > Options > Applications".
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer and use the Adobe Reader instead.
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

Chinese ADA PDF Not Reading Correctly.

Similar Messages

Maybe you are looking for