Chinese Character Input (trackpad) and Spaces

I use Spaces religiously and I can't seem to find a way to enable the Chinese Character Input (trackpad) for any space other than the first space. If I enable Chinese Character Input (controlshiftspacebar) on any space but the first one (upper left) then the Chinese Character Input dialog appears on the first space but not the space I am on. Anyone else experiencing this?
ta

http://discussions.apple.com/thread.jspa?messageID=10068621&#10068621

Similar Messages

Chinese Character Input?

Hi, I have snow leopard and I was wondering how to do the chinese character input, I know that you use the trackpad, but where do I go to do it? Thanks

First of all you need to turn-on the features on the International Panel Located in the Preference area.
I have encounter some bugs on the TrackPad Input. It recognize the characters quite well but, it is quite difficult to delete or accept characters you will understand what I'm saying when you tried it out.

Chinese character input, chinese character input

I intalled Lion OS 10.7.3. however, chinese input (hand writing) cannot be used.
i can call the application, but no chinese character cannot be input, especially when i used it on Safari.

Cross posting
http://forum.java.sun.com/thread.jspa?messageID=9831600

Chinese character input - how do you set it up?

Has anyone been able to get this working, and if so, where do I go to input the characters? This is a wonderful feature on the iPhone and want to be able to do it on my Mac.

NYCPDE wrote:
It's great on the Iphone because you have the screen underneath your finger, but on a regular trackpad, it's not quite the same since you have to lift your finger and then need to look at the screen so that you're sure that it is exactly at the right place. If you just try to trust it, it usually works pretty well, but to me it's much better to just use pinyin or zhuyin for input. still....it's fun!
I just got Snow Leopard up and running, and the trackpad input is a disappointment to me. I played with it for five minutes, but I am unable to use it in a productive way, for exactly the reasons you mention. Well, back to the iPhone!

How to read text file contain chinese character ?

Hi XI Expert,
I have scenario to read text file contain Chinese Character using sender file adapter. but every i was check from sxmb_moni all the chinese character looks different. and also the target file also i has changes.
Please advise me how to maintaine the chinese character in PI 7.0 SP17.
Thank You and Best Regards
Fernand

Hi,
Refer these threads..
Receiver file adapter corrupting characters
Problem in converting special characters in input text file
Here is one more useful guide..
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Sarvesh
Edited by: Sarvesh Singh on Nov 17, 2008 3:47 PM

Flex support for writing pad ( inputing chinese character)

I design a web application that allow customer to input their
messages into the database.
If the input is via keyboard, it is no problem. But it does
not work if the customer is using writing pad for inputing chinese
character.
Does Flash support this, if it is, how ?
Thanks

I'm sure there is a large part of the Mac market that couldn't care less about this, but for those who can use it it's a major reason for buying SL.
Actually I seen a fair amount of disappointment from people who found after buying SL that the trackpad character input feature is only available on a restricted number of machines, and some have felt misled by the advertising about it. Hopefully Apple will be able to expand its availability in the future.
I'd be curious what you find it most useful for: Input of text of some length into documents, emails, etc., or smaller tasks like looking up characters in dictionaries.

MacBook Pro Help- Chinese Input Trackpad

I'm trying to use the Chinese input trackpad option where you write characters on the trackpad and then select them, but whenever I select a character, it doesn't show up on the screen. It used to work before. How can I fix this?

is there any solution on this?

Magic Trackpad with Chinese writing input

Does the new Magic Trackpad work with OS X 10.6 Chinese writing input as on the Macbook Pro with multi-touch trackpad?
cheers.

The trick was to deselect all Chinese-input forms and reboot. Then it was available.
Just as a reminder, if you use spaces, you'll probably want to:
" go to: System/Library/Input Methods/, Find ChineseHandwriting.app
then open system preference, Exposé & Spaces, click on Spaces
then drag ChineseHandwriting.app into the application assignments
then set space to Every Space
Actually, that worked on my MacBook Pro, but it doesn't seem to have worked yet on my Mac Pro. Hmmm... Possibly have to reboot.

How can I let my servlet to process Chinese Character as an input?

How can I let my servlet to process Chinese Character as an input to my simple database which is an Excel file. I have tried before and all my input values become question marks.
Please give me some advise, thx!

input chinese?��
that may result from the tomcat or other web server

Chinese character issue in BSP input text

Hi Experts,
We are using chinese characters for some text fields in BSP.
That characters are displayed correctly in the BSP screen. But the same is converted as numbers and special character in backend and stored in the database table.
When analyse this issue, got the information as the HTML is using Universal Character Set(UCS) code page and it converts all the special (Asian language ) characters to number format.
Since this text is used for report output in ABAP this number format again needs to be converted from UCS format to exact input format.
If you have solution like conversion method or already faced
this problem kindly share it.
Thanks,
Saravanan V

Hi Raja,
Can you please help on this problem. I want to know whether there is any funciton module to convert the univercel character set code (HTML Codepage) page to SAP codepage. We are going to use ECC 6.0 which is unicode system for background R/3. So we can get the correct character format if identify the correct conversion method.
Please let me know if any information and expect some information on this.
Regards,
Saravanan V

Download data from db to CSV file and need to handle chinese character

Hi , all , I need to write to alow to export data from db to csv file, now the problem is some column is chinese character, in both db and web page it can dispaly the chinese, but in Csv I can't display chinese character, what should I do?
Thnak you

HJava wrote:
I already have res.setCharacterEncoding("UTF-8"); in my servlet, and db
req.setCharacterEncoding("UTF-8");
Are you sure that you have set it on the response? You do not need to set it on the request. Have you read the article? Do you understand the world of characters? It look like you still don't understand it.
by the way, since csv is text file , how can I bold my University number??? in sb = new StringBuffer();
sb.append("University Number");Not possible with CSV since it is text/plain. Use real XLS if you want to add formatting to cells.

Chinese character and GUI_Upload

Hello,
Does anyone know how to upload Chinese character from excel file using GUI_UPLOAD?
I already changed the code page (8400) and it's still not working.
Regards,
Andréa

Have you tried to change the file code page to UTF-8?
I had some problems with code page and it solved.

The Chinese character appear once i try to install itunes and the installation failed.

The Chinese character appear once i try to install itunes, i don't know what it said but i can't install it any solution to this? I wanna bring my info on iphone 4 to my iphone 5 which i just bought it recently after lost my last one

Uninstall iTunes and reinstall it.

Cant use chinese character in input scheduler name

Cant use chinese character in input scheduler name

Dear Sorin Radulescu
The input template name can't use chinese character,not the value in input schesule. I can save the template whih name english characters . if save it in chinese characters, I can't open it in input schedule.
thanks

GUI_DOWNLOAD give 2 bytes for each chinese character - I need fixed length

Due to the Unicode system takes each Chinese character as a byte, the field(10) can take 10 Chinese Characters, not like before only 5 characters allowed.
The problem is when the data is downloaded to a txt file. Some records contains only Western Europe charactes and will fill 10 bytes in the output file and other records contains only Chinese characters and will fill up 20 bytes in the output file.
The data is exported for a system that can upload chinese characters, but only allow fixed record length file (always 10 bytes).
In other words: the records with Western Europe characters should contain 10 characters = 10 bytes but the records with Chinese characters should only contain 5 characters = 10 bytes.
Anyone who can solve this, thanks in advance.
My code:
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME                = p_file
      CONFIRM_OVERWRITE       = 'X'
      codepage                = '8400' "Chinese
    CHANGING
      DATA_TAB                = it_output
    EXCEPTIONS

Hi Thomas,
Now I understand.
Pl. check the class CL_ABAP_CONV_X2X_CE.
May it can help u.
Here is it's documentation.
CL CL_ABAP_CONV_X2X_CE
Short Text
Code Page and Endian Conversion Between External Formats
Functionality
Instances of the class CL_ABAP_CONV_X2X_CE allow you to convert text data between different character sets and numeric data between different number formats (byte order).
Using the class corresponds to transforming data from a binary input stream to a binary output stream: The data objects are read from the input buffer sequentially and written to an output buffer.
The class methods are normally used as follows:
CL_ABAP_CONV_X2X_CE=>CREATE
This creates a conversion instance. Among other options, you can specify the following as parameters: The input buffer (that is the binary string that contains the data to be read), the character format at used in the input buffer, the byte order used in the input buffer, the character format to be used in the output buffer, or the byte order to be used in the output buffer.
CONVERT_C, CONVERT_...
This converts the data. Calling this method several times consecutively allows you to read data from the input buffer sequentially and add it to the end of the output buffer.
GET_OUT_BUFFER
This gets the output buffer, making it available for further processing (such as writing to a file, sending using RFC).
RESET
This allows you to reset individual attributes of the conversion instance. (This method is especially designed for restarting on a new input buffer and deleting the output buffer while retaining the remaining attributes.)
Relationships
CL_ABAP_CONV_IN_CE
Converting Binary Data into ABAP Data Objects
CL_ABAP_CONV_OUT_CE
Converting ABAP Data Objects to a Binary Format.
CL_ABAP_CHAR_UTILITIES
Various Attributes and Methods for Character Sets and Byte Order
Example
In the following example, UTF-8 texts are converted to the codepage 1100 (Latin-1) and numbers are converted from little-endian to big-endian format:
DATA:
in_buffer TYPE XSTRING,
out_buffer TYPE XSTRING,
conv TYPE REF TO cl_abap_conv_x2x_ce.
in_buffer = '414220C3B602010000'.
conv = cl_abap_conv_x2x_ce=>create(
         in_encoding = 'UTF-8'
         in_endian = 'L'
         out_encoding = '1100'
         out_endian = 'B'
         input = in_buffer
CALL METHOD conv->convert_c( n = 5 ).
CALL METHOD conv->convert_i( ).
out_buffer = conv->get_out_buffer( ).
The content of the in_buffer variable is made up of 5 bytes (hexadecimal "414220C3B6"), which represent 4 UTF-8 characters (A, B, SPACE, o-Umlaut), and 4 bytes (hexadecimal "02010000"), which represent the value 258 in little-endian format. This data is converted and the out_buffer variable now contains the hexadecimal string "414220F600000102". It is made up of:
4 bytes (hexadecimal "414220F6"), which represent the above 4 characters in codepage 1100 (ISO-8859-1). Note that the length specification n = 5 refers to the number of elementary characters to be converted. For multi-byte codepages like UTF-8 this means that the multi-byte character "C3B6" is counted in length 2.
4 Bytes (hexadecimal "00000102"), which represent the value 258 in big-endian format.
If you have the desired byte order in the old format as expected by TRANSLATE ... NUMBER FORMAT (as an N(4) value), you can proceed as follows:
TYPE-POOLS: ABAP.
CLASS cl_abap_char_utilities DEFINITION LOAD.
DATA:
in_number_format(4) TYPE N VALUE '0101',
out_number_format(4) TYPE N VALUE '0000'.
DATA:
in_endian TYPE ABAP_ENDIAN,
out_endian TYPE ABAP_ENDIAN,
conv TYPE REF TO cl_abap_conv_x2x_ce..
in_endian = cl_abap_char_utilities=>number_format_to_endian(
               in_number_format
out_endian = cl_abap_char_utilities=>number_format_to_endian(
               out_number_format
conv = cl_abap_conv_x2x_ce=>create(
         in_encoding = 'UTF-8'
         in_endian = in_endian
         out_encoding = '1100'
         out_endian = out_endian
         input = in_buffer
Notes
For details refer to the documentation for the individual methods.
Regards,
Joy.

Chinese Character Input (trackpad) and Spaces

Similar Messages

Maybe you are looking for