Chinese characters appear OK in preview but not when printed

I am working on sap script .
In which I am facing problem in printing Chinese character.
In the spool(print preview) I am able to see Chinese characters printed but while printing on a paper it is appearing as '#' Characters.
I am using Font Family as COURIER in basic settings and If I try changing Font to CHSONG(Chinese character font), alignment getting distorted.
I have tried several options available in SDN, but not able to find exact solution on the issue.
Please help me with proper solution.

HI friend,
Try changing the device type which suits the Chinese font. There are many device types which support device types.
Example : CNSAPWIN.
Just try this friend. If you face queries please revert back to me i will help you.
Thanks,
Sri Hari

Similar Messages

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • Captivate 3 shows skin in preview but not when I run after published?

    Captivate 3 shows skin in preview but not when I run after published.  It shows it is included, what's up?

    Is the Skin externalised?  If so, perhaps Flash Global Security is interfering:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    You could also try NOT externalising the skin.

  • Load swf works in Publish Preview but not when published

    Hi Folks,
    I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
    SecurityError: Error #2000: No active security context.
    I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
    Any help would be much appreciated and rewarded with Karma
    movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
    var fl_Loader_9:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_9:Boolean = true;
    function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
    if(fl_ToLoad_9)
      fl_Loader_9 = new Loader();
      fl_Loader_9.load(new URLRequest("search.swf"));
      addChild(fl_Loader_9);
    else
      fl_Loader_9.unload();
      removeChild(fl_Loader_9);
      fl_Loader_9 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_9 = !fl_ToLoad_9;
    movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
    var fl_Loader_10:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_10:Boolean = true;
    function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
    if(fl_ToLoad_10)
      fl_Loader_10 = new Loader();
    fl_Loader_10.load(new URLRequest("refunds.swf"));
      addChild(fl_Loader_10);
    else
      fl_Loader_10.unload();
      removeChild(fl_Loader_10);
      fl_Loader_10 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_10 = !fl_ToLoad_10;

    I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

  • Content appears in iDVD preview but not on burned disc

    Hi there,
    I am using a MacBook running Leopard.
    I have burned 2 other DVDs using iDVD and havent had this particular issue. I put 5 videos on a DVD. I preview the videos before burning the disc to be sure they appear and are linked to the right button, etc etc. All looks fine. When I select that video to play on my DVD player after I have burned the DVD, I get nothing. Just the Sony DVD brand screen. I have cleaned the disc but it still isnt playing at all. It is almost as if there is nothing there. But it shows up just fine in preview before I burn the disc.
    Any help would be appreciated. Thanks.

    Does the finished iDVD play on your mac but not on your home DVD player?
    If this is the case, please try a variety of DVD Players at a store that sells these set tops to find out if this happens on most units or not.
    Also you say,
    I get nothing. Just the Sony DVD brand screen.
    Are you referring to the media / DVD Brand or the default screen on a sony set top player?
    if it's the latter, try adjusting the inputs and outputs on the set top dvd player thru your remote control.
    Lastly, are you using Verbatim / Maxell DVD-R media or some other media?

  • Logo appearing in print preview but not in print for Xerox Workcentre M118

    Hello experts,
    I am not able to print logo(in .bmp) format in Xerox Workcentre M118 PCL 6 printer. It is displaying accurately in print preview. While taking print out only grey background is coming, no trace of logo. Can anyone suggest, what are the print related settings needed in SPAD or any other transaction needed to print graphics. The logo is coming accurately if it is stored in pdf and then printed.
    Regards,
    Debopriyo

    hi,
    To print logos using the SMARTFORMS, we need to first upload that logo onto the application server. The steps to upload the logo onto the application server are as follows:
    1. Go to transaction SE78
    2. Select the desired graphic in the tree (for example, BMAP)
    3. Choose GRAPHIC --> IMPORT
    4. Enter the name of the graph and the description
    5. Select the type of the image (black/white or color)
    Now the logo is uploaded onto the application server. To print this logo using the SMARTFORM, create a graphic node in the window and enter the name of the image you had just uploaded. Your logo should now print.
    Refer the following links.
    http://www.sapmaterial.com/smartform_example.html
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1255081,00.html
    Below is the link for print related problems.
    http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm

  • Works in preview but not when published in captivate 8?

    My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

    Hi Robert,
    as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
    My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
    It might be even necessary to have a look at the fla itself.
    M

  • PayPal button action works in preview but not when published

    Hi! 
    Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista).  Any thoughts or insight would be appreciated.  Also, I'm new to flash and here's the button action:
    on (release) {
            //create the LoadVars that will hold our paypal information
            var paypal = new LoadVars();
            //specify the business, amount of the item, shipping, etc.
            paypal.cmd="_xclick";
            paypal.upload="1";
            paypal.business="[email protected]";
            paypal.currency_code="USD";
            paypal.amount="275.00";
            //paypal.handling = "0";
            //paypal.no_shipping = "0";
            paypal.item_name="One Session";
            //added
            //paypal.lc="GB";
            paypal.bn="PP-BuyNowBF";
            //paypal.no_note="1";
            //send our information to PayPal, including all the optional  variables we have collected from customer
             paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
    Thanks!
    Robert

    Hi Robert,
    as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
    My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
    It might be even necessary to have a look at the fla itself.
    M

  • Site Displays Perfectly in DW Preview But Not When Uploaded

    Hi,
    I have a site which displays fine in IE, both the CSS and
    XHTML validate and when I use the FF preview in looks just fine.
    However when I upload the site to the server, the footer and a
    couple of images are missing and I'm just can't figure out why. All
    the paths are correct but I just can't figure out why it displays
    correctly in the preview FF and it's not when uploaded and viewed
    in FF. Site diplays in IE without any problems via preview or
    upload.
    Any help?

    I think you'll need to post a link or some code.
    Regards
    Martin

  • Menu audio will play during preview but not when disc is burned.

    Encore CS6.
    Menu music plays fine in preview. I know that the file is good. No menu audio after disc is burned. Have tried several different transcoding options. There is menu video too that is working fine.

    Here are notes I couldn't find before I posted that; just general re testing methods:
    Mounting an iso (or building to a folder) is a great way to test.  There are some differences, but it is a great method prior to burning to a disk.  The main difference is simply computer vs dvd player - autoactivate on a button doesn't work with a mouseover, and you can be fooled into thinking your navigation does, or does not, work.  (Even on the computer, don't use the mouse for testing, use the "remote" in the player controls.)
    Encore preview is an emulator, like computer DVD players, that attempts to predict what will happen when a disk is played on a set top DVD player. It has always had issues with some predictions not being accurate. Some inaccuracies are like this one: Encore preview does not work, and a burned disk will. Others are the opposite; it works in Encore preview, and not in a DVD player. The point to be made here is that you cannot rely on Encore preview. You also cannot rely on computer playback of a built image or folder. And, in the end, you cannot rely on playback on one DVD player - some disks work on some players and not on others.

  • Text visible in preview but not when uploaded.

    I'm designing a mobile site in Muse.
    The fonts I'm using are from the Museo family through Typkit.
    I've uploaded the site a few times during the design process and had no trouble with text frames or text appearing.
    Yesterday I added a new text frame in one section to link to a phone number and now sections of text are not visible when I upload the site. It is, however visible in the Muse preview!?
    I've tried creating the text boxes from scratch but they still disappear in that particular section of the site.
    Does anyone know why this is!?
    The pale grey line is the text box where the text should appear.

    Hi Michael,
    It works fine at my end, please try clear browser cookies/cache and then check. If possible, check this on a different device and see how that goes.
    - Abhishek Maurya

  • Query works in preview, but not when added under a Query Group

    Hello Experts-
    I'm trying to use this query as one of the options under the drop down on the Supplier Search under the Supplier Management.
    Error message:
    while trying to invoke the method com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null
    object loaded from local variable 'paramValue' while trying to invoke the method
    com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null object
    loaded from local variable 'paramValue'
    The query itself is complicated, but it works fine when executed under preview.
    Wondering if any one has ever seen this behavior and knows of any typical causes?
    Thanks,
    Mike

    Thanks for the offer, Vignesh.
    Sorry, I'm currently having trouble duplicating it, but next time it happens I'll try to get some screenshots.
    I have narrowed it down to blank values in optional string fields when the query loads. I fixed (kind of) the ones I was having trouble with by rearranging the filter parameters so there would not be blanks.
    Thanks again,
    Mike

  • Plays in preview but not when posted on internet CS4

    Hello,
    I created a quiz that has several small video in AS2.  It works fine when I preview it, but when I post in on the internet it plays the first video and goes to a black screen.  I created the page and clicked to publish it.  I then exported the swf by hitting file/export/export movie then saved this and posted it to the internet.  This is how I have done it in the past, but now I get a blank screen.  Any help would be appreciated.
    Mark.

    At least on my side it only plays the first video and does not progress.  There are twenty-five videos after this, they are all very short  but they progress.   Is this progressing for you?  Perhaps it is my computer if so. Please let me know.
    Thanks again,
    Mark.

  • Barcode printing sapcript available in preview but not in print

    We are trying to print Barcode from ECC 6.0 system but unable to make it ,
    though we can view the same in Print preview , still we are unable to get the same
    in the hard copy.Barcode is not present in hard copy
    Below are settings
    Device type: SAPWIN
    Device class: stardard printer
    Host spool access method : F
    Host printer : Default
    physical Printer : RICOH AFICIO 2018D
    Do we need to keep barcode.DLL in desktop from where we are printing ?
    Is my printer is compatible for barcode printing. ?
    What could be the reason
    Best Regards,
    AjitR

    In saplpd screen i am getting below mentioned error
    12:59:26 PM)
    (12:59:26 PM) Barcode DLL Version 3.7.1 (32 Bit)(Seriennummer 12006)
    Defaults read from "barcode.ini"
    *** Licence expires 23.11.2007 (day,month,year)***
    All Linear Barcodes,PDF 417,Maxicode,Code 16K,Code 49,Datamatrix,QRCode
    (C) 1994-2005 e-bizco.com GmbH, Grosshansdorf, Germany
    http://www.e-bizco.com
    Licenced to: Free Trial:hi
    (12:59:26 PM) Icon DLL loaded.
    (12:59:26 PM)
    (12:59:26 PM) Network Communication via SAP-NiLib
    (12:59:26 PM) Hostname: P057ITSP06C2360
    (12:59:26 PM) IP Address: 12515096.2089886680.32.1223880
    (12:59:26 PM)
    (12:59:26 PM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
    (12:59:26 PM) OS-Info: version = 5.1, build = 0/2600, text = Service Pack 2
    (12:59:26 PM) Copyright © 1992-2001 SAP AG
    (12:59:26 PM)
    (12:59:33 PM)
    (12:59:33 PM) Receive job for printer __DEFAULT (Berkeley LPD protocol / RFC1179)
    (12:59:33 PM) send_status called
    (12:59:33 PM) send_status called
    (12:59:33 PM) send_status called
    (12:59:33 PM) send_status called
    (12:59:33 PM) send_status called
    (12:59:33 PM) Job 000TxmPy.TST for user ABAP1 queued.
    (12:59:33 PM) Start printing job 000TxmPy.TST on printer RICOH AFICIO 2018D PCL 6
    12:59:34 PM) Error from BARCODE.DLL: -9: Bar Code Generation error (Invalid char for this Barcode?)(12:59:34 PM) Print-job 000TxmPy.TST, 1 pages finished.(12:59:34 PM) Elapsed time 0.188 sec (0.000 sec. used by windows)

  • Animation works in browser preview, muse browser preview but not when live in Chrome!

    I have an Edge animation that worked fine in Chrome, Safari and IE.
    The last time I published my Muse site (To BC) again (since update to CC2014) it no longer worked in Chrome!
    Preview in browser (Chrome) from edge works, preview in browser (Chrome) from Muse works, publish and it doesn't work in Chrome (but does in Safari and IE).
    Have been trawling for possibilities but I'm not that web techy! Any help would be appreciated

    Here are some screen shots.
    This is Safari with the edge animation in the top rectangle:
    I tried putting a graphic underneath in Muse so that at least with edge not working in Chrome, nor showing the poster frame, there would be something there as shown here:
    However this did not work in Chrome so I simply see the stage BG colour with no animation as shown here:
    I have made sure that the stage action is set to play the animation - it is nothing more than simple text and rectangles moving in, and then a video (the same px size as the stage) coming in a the end.

Maybe you are looking for