Chinese Language Import in ECC 6.0 system issue

Hi,
Included new Chinese Language in TCode: I18N
I have imported Chinese Language using SMLT, also imported English Supplement to it.
Restarted the system after the Language import, but I am unable to login using Language ZH.
It displays choose one of the valid imported languages.
Kindly any one suggest if any important post steps to be performed to login sucessfully using Language ZH.
Thanks in advance!
Pavan

Hi,
Please go through the following which will be helpful to you
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/21/5532d395ea11d384bb0060975b04f3/content.htm
you need to add profile parameter is zcsa/installed_languages in instance profile
for post implementation action, go through the following link
http://help.sap.com/saphelp_nw70/helpdata/en/17/163d38c2113265e10000009b38f889/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c1/ae563cd2ad4f0ce10000000a11402f/content.htm
Thanks & Regards,
Vidyadhar K

Similar Messages

How to install chinese language in sap ecc 6.0 unicode system

Hi,
I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
guide me for the same where i have to get chinese language,how to install in sap.
Thanku

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

Chinese Language import issue

Hi All,
Need to import Chinese Language in 4.6C. Not sure if I am doing a mistake. Any help would be appreciated.
What I did was:
1. I first added ZH & ZF in SE38->RSCPINST and did the simulate and activate actions.
2. Then I imported the Chinese ZH Alone in SMLT and English as supplement (Since the language CD did not have ZF and I mistakenly added it in RSCPINST).
3. Now I go back to SE38->RSCPINST and delete ZF because I did not import it and click Simulate and then activate it does not do anything. It just gives me the following messages and does not go further.
<b>Do you want to change the databases entries?
Installed languages(in profiles):
ZH Chinese                     8400
DE German                      1100
EN English                     1100
JA Japanese                    8000
The country code (TCP0D):
    Latin1 or MDMP
Necessary code pages (TCPDB):
8400 Simplified Chinese
1100 SAP internal, like ISO 8859-1        (00697/00819)
8000 Shift JIS
TCPDB contains more than one code page!
1. Only the common subset of selected code pages can be used for global data.
2. Please read note 73606 on our Online Support System (OSS):
ftp://sapserv3/home/ftp/general/R3server/abap/note.0073606/document/maindocument.doc
Verify if following locales are installed on operating system:
coral_C13_00        Chinese_CHN.936
                    English_United States.1252
                    German_Germany.1252
                    Japanese_Japan.932
Profile parameters
Profile parameter                        Check result
                                  coral_C13_00
                                       O.K.
   Go back to the selection screen</b>
Even I click Activate the same thing happens and I am not able to login using Chinese language. What have I done wrong???
Please help.
Regards,
kp

issue resolved. thanks. it was OS locales issue.

Chinese Language import issue - TCPDB

Hi All,
Need to import Chinese Language in 4.6C. Not sure if I am doing a mistake. Any help would be appreciated.
What I did was:
1. I first added ZH & ZF in SE38->RSCPINST and did the simulate and activate actions.
2. Then I imported the Chinese ZH Alone in SMLT and English as supplement (Since the language CD did not have ZF and I mistakenly added it in RSCPINST).
3. Now I go back to SE38->RSCPINST and delete ZF because I did not import it and click Simulate and then activate it does not do anything. It just gives me the following messages and does not go further.
<b>Do you want to change the databases entries?
Installed languages(in profiles):
ZH Chinese                     8400
DE German                      1100
EN English                     1100
JA Japanese                    8000
The country code (TCP0D):
    Latin1 or MDMP
Necessary code pages (TCPDB):
8400 Simplified Chinese
1100 SAP internal, like ISO 8859-1        (00697/00819)
8000 Shift JIS
TCPDB contains more than one code page!
1. Only the common subset of selected code pages can be used for global data.
2. Please read note 73606 on our Online Support System (OSS):
ftp://sapserv3/home/ftp/general/R3server/abap/note.0073606/document/maindocument.doc
Verify if following locales are installed on operating system:
coral_C13_00        Chinese_CHN.936
                    English_United States.1252
                    German_Germany.1252
                    Japanese_Japan.932
Profile parameters
Profile parameter                        Check result
                                  coral_C13_00
                                       O.K.
   Go back to the selection screen</b>
Even I click Activate the same thing happens and I am not able to login using Chinese language. What have I done wrong???
Please help.
Regards,
kp

Hi Henry,
I did do that before itself. But jus a small mistake in that. I installed only simple chinese and OS locale for chinese. But then I selected all locales in regional settings and installed. Now it is working fine.
Thanks for your response.
Regards,
kp

Chinese language isntallation in ECC system

Hi,
How can i install Chinese langage in ECC system.
Regards
Siva

Dear,
English and German are default languages in sap. to install chinese you need to import in the system via SMLT tcode.
a)       Start transaction SMLT.
b)       Select a language.
c)       Choose Language ® Special Actions ® Import Support Packages.
Hope this helps
Thanks
syed
Peace Blessings and Prosperity

Ukrainian language instatllation in ECC 5 (Unicode system)

Hi,
I need to install Ukrainian language in ECC 5, this is Unicode system.
I have simulated and activated Ukrainian language in the RSCPINST report. but still in the SMLT the Ukrainian language is not there.............
Any body can suggest how to proceed
Please help asap.
regards,
shanti prajapati

Hi Volker,
Thanks for the reply.
Request you to elobarate, What settings need to be done...
regards,
shanti prajapati

ZF (trad. chinese) language Issue

Hi
After Installation Traditional Chinese(ZF) language, and when I login to SAPGUI with ZF option, I notice that the SAP menu language with inappropriate characters like square box, ?, etc..
Is there any step which I need to execute as post language import steps?
Thanks & Regards
Madhu

Hi Madhu,
language import in NW 7.0 systems (including post processing) is described here:
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700001183852006E
However I doubt that your problem is caused by missing language import tasks.
Are you using the latest SAPGUI patch ?
Can you please check SAP note 508854 (I assume you have a Unicode system ...) ?
Also a more detailed description according to SAP note 764480 could help to identify the issue (also in case you want to open a customer message).
Best regards,
Nils Buerckel
SAP AG

SMLT -- Czech Language Import -- .PAT files

Dear Support,
We are planning to import/add a new Czech Language into our ECC 60 system.
When I called the SMLT transaction to import the language from FrontEnd, the system is not finding the content from the CD 51033496_1. The CD has .PAT files instead of .sar or .car files.
I have also copied the .PAT file onto /usr/sap/trans/EPS/in, but still the SMLT tool is not finding the language content to import.
Could you please help me out with this issue?
Thank you,
Nikee

HI Nikee
check this SAP Nope , hope this will solve ur issue
Note 1254022 - SMLT: Language imports not displayed in EHP systems
SMLT displays only the languages for which the current (SAP Basis) release has been imported. This makes sense because otherwise, the system would also display the language imports for the previous release after an upgrade. The problem now occurs because the systems that have an Enhancement Package imported the same language packages as the systems that do not have an Enhancement Package even though the release is different. For example, the SAP Basis 7.00 language package is imported into an SAP Basis 7.01 system. Since the releases do not correspond, the system does not display the language package in SMLT.To correct the error, SMLT must recognize an Enhancement Package release and the release check for this must be configured in a more flexible way
Cheers
dEE

Data files removed during language import

Hi,
While running a language import on ECC 6.0, someone removed the data files from the /usr/sap/trans/data directory.
We are facing 2 problems now :
1. the language that must be imported is now locked in SMLT (no lock exists in SM12 as described in help)
2. we can't find how to recreate the datafile from the .PAT file located on the install DVD. (some people have told me they did it before, but can't find back how)
Can someone please help ?
Tx in advance
Patrice.

What I know is,
If the datafiles deleted we can't add manually. better to install. before that taka a backup of existing one.
regards
ganesh

Language import takes too much time in ECC EHP4 system

Hi All,
We are trying to import the Languages in to ECC EHP4 system ...But each Language takes almost 48 hours to get imported.
and even the language supplementation takes too much time ...
Please help in tuning the memory parameter if required ...and the Data Base is DB2

Hi,
So what is your system details ?
OS ?
Have you just installed the system ?
Just upgraded to EHP4 ?
Any trace files ?
what is the system load.....
Mark

Importing the Chinese language

Hello colleagues,
I have a problem with importing the Chinese language into the customer's system.
Setup: classic 3 system landscape ECC 6.0 on Windows X64 / SQL Server 2005. Defined clients on development: 302 & 303, acceptance: 200 & production: 100. Required languages: English, German & Chinese.
Importing English & German caused no problems. At first, importing the Chinese language seemed to be ok as well, but apparently their are some "missing" parts in the customer clients. Missing is not the right word, because I supplemented the Chinese language with English so that these missing parts appear in English when logged on in language ZH.
Now I found out that the Chinese translation for some of these parts does exist in client 000, for example the description of the different views in transaction MM03. I've checked table T133B and saw that for client 000 and language 1 (Chinese) the real Chinese translations were there. For client 302 or 303 and language 1, the descriptions are in English...
My question: how can I replace the current (supplemented) English translations in the customer clients with the "real" Chinese translations that exist in client 000? I've tried every available option in transaction SMLT (basic supplementation, expert supplementation, nsrefill, ...) but to no avail: the English texts are still there...
Thank you for your help and best regards,
Steven

Solved it by re-importing the entire language pack in client 000.

Import Chinese Language in IDES.

Hi Gurus!!!
We had Windows NT,SAP IDES ECC 6.0 on Oracle 10.2.Unicode System.
We want to import "Chinese" Language
So pls guide us,
How to Download & import Language Files???
Regards,
Amol

i'm note sure you can do this in an IDES. run tx. SMLT to check whether this is possible. check for restrictions on hardware/software/setup in service.sap.com/globalization. then download the language and install like described in the documentation.

Chinese language problem in IDES ECC 6.0 SR3

I just finished the installation of IDES ECC 6.0 SR3, but after i changed zcsa/installed_languages to '1DE' and tried to logon using 'ZH' which stand for chinese, it doesn't work and only show messy codes.
According to note 1244548:
"The system already contains more than 20 languages. Use transaction SMLT to check the status and set the system profile parameter zcsa/installed_languages accordingly to use them."
It should be alright, anything configuation i missed?
Lin

Hi ,
     zcsa/installed_languages parameter has to set for each language .We suppose that you set is correctly i.e. code for chinese is 1.Please check it once again .If you feel this code for chinese language is correct then you need to install this language in SMLT tcode.
       Please remember that only english & german language comes as default in SAP .Any language ther than this you have to install it via SMLT tcode.You can find the CD of these languages at marketplace.
       Please dont forget to supplement language after installation of chinese.
    Also as you said in post that you system contains more than 20 languages but your profile contains calue of only three .Please make sure that you set this parameter contaning values for each language.Please use tcode I18n to get the help for same.
Thanks..
Mohit
Edited by: mohit gupta on Mar 5, 2010 11:29 AM

We would like to use cyrilic language characters in ECC system with custome

We would like to use cyrilic language characters in ECC system with "customer reserve" language (Z1).
We have positive experience on one system for certain business partner in Macedonia (there is no Macedonian language to install as SAP standard) by using "customer reserve" language (Z1).
Now we are about to introduce other system with same approach. The trouble is that after entering Macedonian language on an cost center with language Z1 on first language and transfering it via idoc we get hashes("#") instead of characters on second language
What could be the reason? I suplemented with english (as on the first system where everything is ok) the "Customer reserve"(Z1) language normaly(with default settings).
On first system this was not done by me.
Should supplementation be done specificly?.(how to find settings for supplemention on first system?)
Please give me a hint

Hi,
To check supplement language go to T-code, SMLT ->Language ->Special actions->Supplementaion
you can get more information from below SDN thread.
Cyrilic char not coming properly
Below SAP help document gives you how to find supplement language & installation of languaes.
http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/content.htm
Regards
Nagaraju

Import of Goods receipt to ECC from legacy system

Hi Gurus,
We are in the process of upgrading to ECC 6.0 and wanted to help me in the process of importing goods receipts from legacy system to ECC 6.0.
Please do help me.
Thanks for your time and paticence in advance.
regards,
Raj

Hi Dave,
Thanks for the reply.
We are trying to bring in the PO from legacy system (R/3 3.1i) to ECC 6.0 and in continuation with that we have to also bring the GR IR details for those PO's.
You indicated that we could use LSMW.. but which is the transaction we have to use to record the upload in LSMW.
Looking forward for your inputs.
regards,
Raj

Chinese Language Import in ECC 6.0 system issue

Similar Messages

Maybe you are looking for