Chinese Language import issue - TCPDB

Hi All,
Need to import Chinese Language in 4.6C. Not sure if I am doing a mistake. Any help would be appreciated.
What I did was:
1. I first added ZH & ZF in SE38->RSCPINST and did the simulate and activate actions.
2. Then I imported the Chinese ZH Alone in SMLT and English as supplement (Since the language CD did not have ZF and I mistakenly added it in RSCPINST).
3. Now I go back to SE38->RSCPINST and delete ZF because I did not import it and click Simulate and then activate it does not do anything. It just gives me the following messages and does not go further.
<b>Do you want to change the databases entries?
Installed languages(in profiles):
ZH Chinese                     8400
DE German                      1100
EN English                     1100
JA Japanese                    8000
The country code (TCP0D):
    Latin1 or MDMP
Necessary code pages (TCPDB):
8400 Simplified Chinese
1100 SAP internal, like ISO 8859-1        (00697/00819)
8000 Shift JIS
TCPDB contains more than one code page!
1. Only the common subset of selected code pages can be used for global data.
2. Please read note 73606 on our Online Support System (OSS):
ftp://sapserv3/home/ftp/general/R3server/abap/note.0073606/document/maindocument.doc
Verify if following locales are installed on operating system:
coral_C13_00        Chinese_CHN.936
                    English_United States.1252
                    German_Germany.1252
                    Japanese_Japan.932
Profile parameters
Profile parameter                        Check result
                                  coral_C13_00
                                       O.K.
   Go back to the selection screen</b>
Even I click Activate the same thing happens and I am not able to login using Chinese language. What have I done wrong???
Please help.
Regards,
kp

Hi Henry,
I did do that before itself. But jus a small mistake in that. I installed only simple chinese and OS locale for chinese. But then I selected all locales in regional settings and installed. Now it is working fine.
Thanks for your response.
Regards,
kp

Similar Messages

Chinese Language import issue

Hi All,
Need to import Chinese Language in 4.6C. Not sure if I am doing a mistake. Any help would be appreciated.
What I did was:
1. I first added ZH & ZF in SE38->RSCPINST and did the simulate and activate actions.
2. Then I imported the Chinese ZH Alone in SMLT and English as supplement (Since the language CD did not have ZF and I mistakenly added it in RSCPINST).
3. Now I go back to SE38->RSCPINST and delete ZF because I did not import it and click Simulate and then activate it does not do anything. It just gives me the following messages and does not go further.
<b>Do you want to change the databases entries?
Installed languages(in profiles):
ZH Chinese                     8400
DE German                      1100
EN English                     1100
JA Japanese                    8000
The country code (TCP0D):
    Latin1 or MDMP
Necessary code pages (TCPDB):
8400 Simplified Chinese
1100 SAP internal, like ISO 8859-1        (00697/00819)
8000 Shift JIS
TCPDB contains more than one code page!
1. Only the common subset of selected code pages can be used for global data.
2. Please read note 73606 on our Online Support System (OSS):
ftp://sapserv3/home/ftp/general/R3server/abap/note.0073606/document/maindocument.doc
Verify if following locales are installed on operating system:
coral_C13_00        Chinese_CHN.936
                    English_United States.1252
                    German_Germany.1252
                    Japanese_Japan.932
Profile parameters
Profile parameter                        Check result
                                  coral_C13_00
                                       O.K.
   Go back to the selection screen</b>
Even I click Activate the same thing happens and I am not able to login using Chinese language. What have I done wrong???
Please help.
Regards,
kp

issue resolved. thanks. it was OS locales issue.

Chinese Language Import in ECC 6.0 system issue

Hi,
Included new Chinese Language in TCode: I18N
I have imported Chinese Language using SMLT, also imported English Supplement to it.
Restarted the system after the Language import, but I am unable to login using Language ZH.
It displays choose one of the valid imported languages.
Kindly any one suggest if any important post steps to be performed to login sucessfully using Language ZH.
Thanks in advance!
Pavan

Hi,
Please go through the following which will be helpful to you
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/21/5532d395ea11d384bb0060975b04f3/content.htm
you need to add profile parameter is zcsa/installed_languages in instance profile
for post implementation action, go through the following link
http://help.sap.com/saphelp_nw70/helpdata/en/17/163d38c2113265e10000009b38f889/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c1/ae563cd2ad4f0ce10000000a11402f/content.htm
Thanks & Regards,
Vidyadhar K

Chinese language support for the 8120?

Does anyone know how to add Chinese language (pinyin input) support to the 8120 pearl?
Thanks

Ive been working on the Chinese language input issue for about a day now and have found it very frustrating. Im not sure why there seems to be so little support for this and an absence of this feature in the included software. I know for a fact that these are sold in chinese speaking markets. I think its a real failure on the part of BB and will probably be returning mine infavor of another product.

ZF (trad. chinese) language Issue

Hi
After Installation Traditional Chinese(ZF) language, and when I login to SAPGUI with ZF option, I notice that the SAP menu language with inappropriate characters like square box, ?, etc..
Is there any step which I need to execute as post language import steps?
Thanks & Regards
Madhu

Hi Madhu,
language import in NW 7.0 systems (including post processing) is described here:
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700001183852006E
However I doubt that your problem is caused by missing language import tasks.
Are you using the latest SAPGUI patch ?
Can you please check SAP note 508854 (I assume you have a Unicode system ...) ?
Also a more detailed description according to SAP note 764480 could help to identify the issue (also in case you want to open a customer message).
Best regards,
Nils Buerckel
SAP AG

Importing the Chinese language

Hello colleagues,
I have a problem with importing the Chinese language into the customer's system.
Setup: classic 3 system landscape ECC 6.0 on Windows X64 / SQL Server 2005. Defined clients on development: 302 & 303, acceptance: 200 & production: 100. Required languages: English, German & Chinese.
Importing English & German caused no problems. At first, importing the Chinese language seemed to be ok as well, but apparently their are some "missing" parts in the customer clients. Missing is not the right word, because I supplemented the Chinese language with English so that these missing parts appear in English when logged on in language ZH.
Now I found out that the Chinese translation for some of these parts does exist in client 000, for example the description of the different views in transaction MM03. I've checked table T133B and saw that for client 000 and language 1 (Chinese) the real Chinese translations were there. For client 302 or 303 and language 1, the descriptions are in English...
My question: how can I replace the current (supplemented) English translations in the customer clients with the "real" Chinese translations that exist in client 000? I've tried every available option in transaction SMLT (basic supplementation, expert supplementation, nsrefill, ...) but to no avail: the English texts are still there...
Thank you for your help and best regards,
Steven

Solved it by re-importing the entire language pack in client 000.

Import Chinese Language in IDES.

Hi Gurus!!!
We had Windows NT,SAP IDES ECC 6.0 on Oracle 10.2.Unicode System.
We want to import "Chinese" Language
So pls guide us,
How to Download & import Language Files???
Regards,
Amol

i'm note sure you can do this in an IDES. run tx. SMLT to check whether this is possible. check for restrictions on hardware/software/setup in service.sap.com/globalization. then download the language and install like described in the documentation.

Issue with Chinese language in DI

Hi all,
My source is AS400 with CCSID=935, my target is Oracle with AL16UTF16. I migrate data from source (in Chinese language) to target by DI version 3.0. I used Client Access ODBC driver to connect to AS400.
It run well. But data is not correct, it can't show in Web Intelligence report, they are only square symbol. It's just got issue with Chinese language, for English, it' fine.
I also tried to set code page of source to shift_jis and target to utf8. But it still got the same result.
I don't know anything I need to set. Please help me to fix this.
Thanks so much,
Anh

Yes. I changed the datastore to default.
I used both method: ODBC driver and IBM iseries access to connect to AS400. ODBC is the same in BODI. In universe, I used default, I can see data. But in BODI, I can't.
My machine is BOE client software. But I created universe in my machine, export it. And then from my machine, I created WI report, also export to CMS. And then I view it in ViewInfo. Everything runs well for both connections.
But in BODI, I use it to migrate data to Oracle. I can't see data in DataView of Designer too. Although, I changed locale, set codepage to default as you told, it didn't work.
Any suggestions please.
Anh
Edited by: Anh Phan on Mar 30, 2010 4:45 AM

Language issue/PDF issue/Chinese language

Hi Folks,
preview of the smart form looks fine.
But when is converted to PDF, Some part of the text is displaying correctly and some part are converting to junk values.
can you please suggest any solution.
PS.. data is in Chinese language.

Hi,
Ask your basis team. They will check and configure the code page and vocabulary accordingly.
For more details please go through the link below:
[code page|http://help.sap.com/saphelp_nw04/helpdata/en/22/5a981cfbaa06428abdfa32b81423d2/frameset.htm]
[code page 2|http://help.sap.com/saphelp_nw04/helpdata/EN/65/9fb5d80f7c2e4fbc6258b66e131285/content.htm]
KR Jaideep,

Chinese language pack on English-language Nokia E7...

I'm based in Manila and just bought a Nokia E72 cellphone here locally in the Philippines. The unit is labeled E72-1.
I needed a cellphone which can display Chinese-language (both Traditional & Simplified Chinese) characters.
Unfortunately, this E72 I bought here only has the English language.
I've read that the Nokia E72 in Hong Kong / Taiwan / Singapore can display both English and Chinese language.
Is it possible to have the Nokia E72 add a Chinese language pack to display Chinese characters? I really need the Chinese display capability since I regularly have contacts who send me important SMS messages with Chinese characters.
If it's not possible to add the Chinese character display capability, I may be forced to let go of this Nokia E72 and perhaps have to order it instead from Hong Kong (or perhaps Taiwan or Singapore) where I presume the Nokia E72 there will have the English + Chinese display capability built-in.
Although not as important as the Chinese-display capability, I would also like if it could have Chinese language input capability installed on this E72. Is this also possible?
Note that I don't need the phone system menus/commands to be displayed in Chinese language (and actually prefer them to be English language). I only need the phone to display/input Chinese characters in the SMS messages.
Please advise so that I can make a decision as soon as possible, whether to let go of this locally-bought E72 with only English language and instead procure a unit from abroad with the Chinese language display (and input) capability.

I'd like to add some more information which may or may not be exactly useful for those who have the same issue as mine:
Adding as much Chinese as possible on the E72 without Chinese language pack:
http://europe.nokia.com/support/product-support/e72/software
Mobile dictionary language packages Translate words into the language of your choice. Add new languages to your pre-installed Mobile dictionary application from Mobile dictionary download page >>Text-to-Speech language packages and voice packages
Let your phone read your messages out loud with Text-to-speech, a tool which allows you to listen to text messages, multimedia messages, and emails. To utilize your Message Reader application download language packages and voice packages at the Text-to-speech page >>
1) Using the above page, one can download Chinese dictionary (Traditional and Simplified Chinese versions available).
It seems that after installing both dictionaries for the Mobile Dictionary application, I can fire up the Mobile Dictionary app and choose Target language to Traditional and Simplified Chinese. The Traditional Chinese characters don't seem to display (some characters display while others are "square boxes"; but the Simplified Chinese characters appear to display correctly.)
So, it appears that the dictionary app can display Chinese characters (at least Simplified Chinese) after installing, although the SMS messages still display "square boxes" where there are Chinese characters.
2) Download Chinese [Mandarin] (or Chinese [HK]) language text-to-speech. Now even though the E72 doesn't display Chinese characters (they show up as square boxes), I can use the msg reader to read those "square boxes" messages and it will read them in Chinese. So at least, that's one way of having Chinese read back to you although the characters themselves can't be displayed. (Set Language Detection to "On" in the Speech settings so it automatically recognizes Chinese; or one could also set the Voice Language to Mandarin Chinese so that even the voice prompts are read in Mandarin Chinese -- however, if Language Detection is set to "Off", it will try to read English SMS messages as per Chinese pinyin -- ie. incorrectly.).
One bug I notice is that for Chinese character email messages (Nokia Messaging). If I set my Language to English, but set the Speech setting of Language Detection to "On", and then activate the "Listen/Read" email messages, then the Msg Reader will hang up the phone. I had to use a utility called JBakTaskman to forcefully close Msg Reader (if don't have JBakTaskman, then have to turn off the phone and turn it back on). So it looks like while the Language Detection can auto-detect Chinese characters in SMS messages and read them properly in Chinese, it seems to hang up in Email Messages.

Material descriptions in chinese language is not transferred to SRM

Hi All,
We have an issue in transfering material description in chinese language from ECC to SRM.
We are on SRM 5.5 and ECC 6.0
I've set filter in R3AC1 with Table name "matk" anf field "SPRAS" to take care of language.
This works fine for all language except chinese both for initial and delta down load.
Any help is greatly appreciated

Hi,
Which your support package?
Did you already seek OSS?
Rgs,
Pedro Marques

Error in Language import using SMLT .

Hi,
I was importing japanese language in SAP ERP 6.0 EHP4. import process was started using SMLT and the import process is taking long to get imported.
Below is the observation in SMLT:
1. JOB: SAP-LANGUAGE-IMP JA SAPKLJASR1EH shows status finished.
2. Action log is stuck at:
@5B\QInformation@ Start import (state:initial)
@5B\QInformation@ ... system date: 10.09.2014 system time: 12:40:58
@5B\QInformation@ Version: 701.F.15
@5B\QInformation@ Step INIT ...
@5B\QInformation@ ... system date: 10.09.2014 system time: 12:40:58
@5B\QInformation@ ... configuration "Selective Language Import"
@5B\QInformation@ ... executed successfully
@5B\QInformation@ Step DISASSEMBLE ...
@5B\QInformation@ ... system date: 10.09.2014 system time: 12:40:59
@5B\QInformation@ ... do not overwrite data files and cofiles (settings)
@5B\QInformation@ ... executed successfully
@5B\QInformation@ Step ADD TO BUFFER ...
@5B\QInformation@ ... system date: 10.09.2014 system time: 12:42:22
@5B\QInformation@ ... executed successfully
@5B\QInformation@ Step MAIN IMPORT ...
@5B\QInformation@ ... system date: 10.09.2014 system time: 12:42:28
@5B\QInformation@ ... number of parallel import processes: 1 (settings)
@5B\QInformation@ ... start tp IMPORT SUBSET (TPSTAT = 20140910124228390)
@5B\QInformation@ ... waiting for entry in TPSTAT (12:42:28)
@5B\QInformation@ ====== Control passed to tp/R3trans (see long text) ======
3. At OS level, location: E:\usr\sap\trans\log and file: SLOG1437.RE1 shows the following message:
START imp single RE1 20140910123924 BASIS mb3ap1024 20140910124228390
START DD IMPORT RE1 H 20140910123925 BASIS mb3ap1024 20140910124228390
WARNING: System RE1. Warning. 20140910124154 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910124755 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910125155 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910125255 :
WARNING: Background job RDDIMPDP could not be started or terminated abnormally.
Please check that the R/3 system is running.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910125556 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910130156 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910130557 :
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=RE1
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System RE1. Warning. 20140910130657 :
WARNING: Background job RDDIMPDP could not be started or terminated abnormally.
Please check that the R/3 system is running.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
i tried abortimp and started the import again but the error messages were the same as first time.
Kindly provide some assistance on this issue.
Regards,
Mamta Bijlani.

WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F1.RE1
is already in use (170), I'm waiting 3 sec (20140910144553). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F1.RE1
is already in use (180), I'm waiting 4 sec (20140910144622). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F1.RE1
is already in use (190), I'm waiting 5 sec (20140910144658). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (10), I'm waiting 1 sec (20140910145640). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (20), I'm waiting 2 sec (20140910145703). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (30), I'm waiting 3 sec (20140910145734). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (40), I'm waiting 4 sec (20140910145804). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (50), I'm waiting 1 sec (20140910145836). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (60), I'm waiting 2 sec (20140910145858). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (70), I'm waiting 5 sec (20140910145929). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (80), I'm waiting 4 sec (20140910150002). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (90), I'm waiting 3 sec (20140910150039). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (100), I'm waiting 2 sec (20140910150109). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (110), I'm waiting 3 sec (20140910150142). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (120), I'm waiting 5 sec (20140910150208). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (130), I'm waiting 3 sec (20140910150234). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (140), I'm waiting 4 sec (20140910150312). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F2.RE1
is already in use (150), I'm waiting 4 sec (20140910150349). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (10), I'm waiting 4 sec (20140910151604). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (20), I'm waiting 1 sec (20140910151635). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (30), I'm waiting 2 sec (20140910151706). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (40), I'm waiting 1 sec (20140910151731). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (50), I'm waiting 3 sec (20140910151804). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (60), I'm waiting 1 sec (20140910151828). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (70), I'm waiting 1 sec (20140910151855). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (80), I'm waiting 5 sec (20140910151929). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (90), I'm waiting 5 sec (20140910151958). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (100), I'm waiting 4 sec (20140910152024). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (110), I'm waiting 2 sec (20140910152105). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (120), I'm waiting 1 sec (20140910152133). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (130), I'm waiting 1 sec (20140910152157). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (140), I'm waiting 4 sec (20140910152234). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (150), I'm waiting 2 sec (20140910152308). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (160), I'm waiting 5 sec (20140910152341). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (170), I'm waiting 4 sec (20140910152419). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (180), I'm waiting 4 sec (20140910152450). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (190), I'm waiting 4 sec (20140910152516). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (200), I'm waiting 1 sec (20140910152544). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (210), I'm waiting 2 sec (20140910152614). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (220), I'm waiting 5 sec (20140910152636). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (230), I'm waiting 4 sec (20140910152715). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (240), I'm waiting 1 sec (20140910152749). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (250), I'm waiting 3 sec (20140910152820). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (260), I'm waiting 2 sec (20140910152854). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (270), I'm waiting 5 sec (20140910152932). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (280), I'm waiting 5 sec (20140910152959). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (290), I'm waiting 1 sec (20140910153025). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (300), I'm waiting 4 sec (20140910153055). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (310), I'm waiting 4 sec (20140910153123). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (320), I'm waiting 3 sec (20140910153156). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (330), I'm waiting 2 sec (20140910153230). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (340), I'm waiting 4 sec (20140910153259). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (350), I'm waiting 4 sec (20140910153326). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (360), I'm waiting 4 sec (20140910153353). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (370), I'm waiting 2 sec (20140910153430). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (380), I'm waiting 1 sec (20140910153456). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (390), I'm waiting 1 sec (20140910153526). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (400), I'm waiting 2 sec (20140910153548). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (410), I'm waiting 3 sec (20140910153615). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (420), I'm waiting 2 sec (20140910153649). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (430), I'm waiting 4 sec (20140910153716). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (440), I'm waiting 1 sec (20140910153748). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (450), I'm waiting 4 sec (20140910153812). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (460), I'm waiting 2 sec (20140910153845). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (470), I'm waiting 5 sec (20140910153917). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (480), I'm waiting 5 sec (20140910153951). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (490), I'm waiting 3 sec (20140910154022). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (500), I'm waiting 1 sec (20140910154051). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (510), I'm waiting 5 sec (20140910154120). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (520), I'm waiting 5 sec (20140910154151). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (530), I'm waiting 5 sec (20140910154223). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (540), I'm waiting 2 sec (20140910154255). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (550), I'm waiting 2 sec (20140910154327). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (560), I'm waiting 5 sec (20140910154358). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (570), I'm waiting 3 sec (20140910154426). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (580), I'm waiting 1 sec (20140910154455). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (590), I'm waiting 4 sec (20140910154525). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (600), I'm waiting 4 sec (20140910154600). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (610), I'm waiting 5 sec (20140910154634). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (620), I'm waiting 4 sec (20140910154710). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (630), I'm waiting 2 sec (20140910154741). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (640), I'm waiting 4 sec (20140910154801). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (650), I'm waiting 2 sec (20140910154830). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (660), I'm waiting 4 sec (20140910154909). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (670), I'm waiting 5 sec (20140910154935). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (680), I'm waiting 4 sec (20140910155007). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (690), I'm waiting 3 sec (20140910155045). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (700), I'm waiting 3 sec (20140910155117). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (710), I'm waiting 3 sec (20140910155149). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (720), I'm waiting 5 sec (20140910155222). My name: pid 6896
on mb3ap1024 (APServiceRE1)
WARNING: \\MB3AP1020\sapmnt\trans\tmp\SAPKKLJASR1EHP4ERP6F4.RE1
is already in use (730), I'm waiting 1 sec (20140910155254). My name: pid 6896
on mb3ap1024 (APServiceRE1)
SLOG 50 lines.

NW04s WAS 7.0 displays some texts in chinese language

I have installed NW04s ABAP instance (WAS 7.0)with all the default settings. When I logged in to the SAP system, I noticed that all the text messages are being shown in some Chinese language. Later I realized that, not only this screen but also all the screens have the same problems.Has anyone seen this kind of weird problem? Do you have any idea what is causing this? Any help in this regard will highly be appreciated.
Thanks
Rajan S

Are you saying that different language pack is installed in this system?. I checked through SMLT and noticed only two language support packages of GERMAN and ENGLISH are imported.Also verifed through I18N , the system has ENGLISH and GERMAN only. This is the default install and I have not installed any other language at all
Thanks for you help.

Convert Spool Request in chinese Language to PDF

kindly help me to solve the issues.
is there any way to convert the spool request which is in chinese langauge,
Requirement is to download SAP Script to PDF, where the PDF file should be in Chinese format.
i used the following FM
1)CONVERT_OTFSPOOLJOB_2_PDF
2)CONVERT_ABAPSPOOLJOB_2_PDF
in the spool the chinese format is visible, but in the PDF instead of the chinese language, v r getting Junk values.
Thanks in Advance.
Kesav

Hi,
Try executing the Program: 'RSTXPDFT4'.
This Program will generate a PDF file when spool request is given in the selection screen.
Regards,
Ravi Kiran..

Error in Chinese language translation In Forms....

We have our application based on Oracle and d2k.
Standard language is English. Thus all the labels and data in the Form and in the Tables are in english language. Now we wish to generate one of the forms in chinese language which will change the labels in the form to chinese letters.
Approach we followed:
All the corresponding english lables in The Form Screen are generated in the Chinese language in the excel file. We have imported the .csv file with corrsponding lables in our schema. and the data is populated in the tables.
Problem encountered:
All the data in the tables is shown as junk values. ie, ???????
NLS_LANG has been set in the registry as
"TRADITIONAL Chinese_Hong Kong.UTF8".
I have this feeling that i am setting the wrong lang setting.
let me know if this is correct and what else can i check so that i can junk characters paves ways to chinese characters.
When i try to insert in the tables thro SQL.... it does not allow and the char are still ?????????????????????
Kindly suggest.

When i have done the changes as suggested by u, i am not able to launch SQL...
message is:
ORA-12705: invalid or Unknown NLS parameter value specified.
When i open google site.. the screens are in chinese .. this shows system has accepted the chinese character set.
My previous settings allowed me to connect to SQL but the data was junk characters like ???????????????

Chinese Language import issue - TCPDB

Similar Messages

Maybe you are looking for