Chinese language isntallation in ECC system

Hi,
How can i install Chinese langage in ECC system.
Regards
Siva

Dear,
English and German are default languages in sap. to install chinese you need to import in the system via SMLT tcode.
a)       Start transaction SMLT.
b)       Select a language.
c)       Choose Language ® Special Actions ® Import Support Packages.
Hope this helps
Thanks
syed
Peace Blessings and Prosperity

Similar Messages

We would like to use cyrilic language characters in ECC system with custome

We would like to use cyrilic language characters in ECC system with "customer reserve" language (Z1).
We have positive experience on one system for certain business partner in Macedonia (there is no Macedonian language to install as SAP standard) by using "customer reserve" language (Z1).
Now we are about to introduce other system with same approach. The trouble is that after entering Macedonian language on an cost center with language Z1 on first language and transfering it via idoc we get hashes("#") instead of characters on second language
What could be the reason? I suplemented with english (as on the first system where everything is ok) the "Customer reserve"(Z1) language normaly(with default settings).
On first system this was not done by me.
Should supplementation be done specificly?.(how to find settings for supplemention on first system?)
Please give me a hint

Hi,
To check supplement language go to T-code, SMLT ->Language ->Special actions->Supplementaion
you can get more information from below SDN thread.
Cyrilic char not coming properly
Below SAP help document gives you how to find supplement language & installation of languaes.
http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/content.htm
Regards
Nagaraju

How to install chinese language in sap ecc 6.0 unicode system

Hi,
I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
guide me for the same where i have to get chinese language,how to install in sap.
Thanku

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

Chinese Language Import in ECC 6.0 system issue

Hi,
Included new Chinese Language in TCode: I18N
I have imported Chinese Language using SMLT, also imported English Supplement to it.
Restarted the system after the Language import, but I am unable to login using Language ZH.
It displays choose one of the valid imported languages.
Kindly any one suggest if any important post steps to be performed to login sucessfully using Language ZH.
Thanks in advance!
Pavan

Hi,
Please go through the following which will be helpful to you
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/21/5532d395ea11d384bb0060975b04f3/content.htm
you need to add profile parameter is zcsa/installed_languages in instance profile
for post implementation action, go through the following link
http://help.sap.com/saphelp_nw70/helpdata/en/17/163d38c2113265e10000009b38f889/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c1/ae563cd2ad4f0ce10000000a11402f/content.htm
Thanks & Regards,
Vidyadhar K

Problem while importing Chinese traditional - ZF language in ECC system

eHello All,
I am in process of importing Chinese traditional language - ZF to one of our ECC system. For installing I am following below steps:
1. Executed SMLT
2. Classify --> Saved ZF - Chinese traditional language
3. Imported support package.
4. Then Select language u201CChinese trad.u201D And Goto Language --> Special Actions --> Import Support Packages
while i am doing 4th step and importing support packages, For some of the old support packages the status is "Not found" as they are not there at OS level. (Ex: The status "Not found" is there for SP SAPKH60001 - SP 01 for SAP_APPL 6.00. While our system is at SAP_APPL version 604).
While i am deselecting this component it's giving me following message:
You can only exclude files from the import at the end of the list.
The Support Package import is incomplete. Continue the import with the missing
files.
Can anyone please do let me know what has to be done to resolve this???
Reagrds,
Nirav

Check
Note 1068483 - Language import and EhPs (Enhancement Packages)
And also
Note 1479911 - OCS import imports too many Support Packages
Markus

Chinese language problem in IDES ECC 6.0 SR3

I just finished the installation of IDES ECC 6.0 SR3, but after i changed zcsa/installed_languages to '1DE' and tried to logon using 'ZH' which stand for chinese, it doesn't work and only show messy codes.
According to note 1244548:
"The system already contains more than 20 languages. Use transaction SMLT to check the status and set the system profile parameter zcsa/installed_languages accordingly to use them."
It should be alright, anything configuation i missed?
Lin

Hi ,
     zcsa/installed_languages parameter has to set for each language .We suppose that you set is correctly i.e. code for chinese is 1.Please check it once again .If you feel this code for chinese language is correct then you need to install this language in SMLT tcode.
       Please remember that only english & german language comes as default in SAP .Any language ther than this you have to install it via SMLT tcode.You can find the CD of these languages at marketplace.
       Please dont forget to supplement language after installation of chinese.
    Also as you said in post that you system contains more than 20 languages but your profile contains calue of only three .Please make sure that you set this parameter contaning values for each language.Please use tcode I18n to get the help for same.
Thanks..
Mohit
Edited by: mohit gupta on Mar 5, 2010 11:29 AM

Invoice PDF outputs Displaying # instead of Russian Language in ECC system

Hi Folks,
In our ECC System ( EHP6 SP08) , Invoice output is being displayed in as # characters instead of Russian Language. Could any of suggest how we can proceed further
Regards,
Sharma

Hi
Did you checked for imported languages? SMLT transaction?
Also, please check if you have fixed the language at ADS configurations (RFC, JCO, etc...)

Chinese Language Problem.

Hi Experts,
Scenario 1:
I have a customer Master in ECC for which all the Basic Data is in Chinese text Name1,Street and so on were in Chinese Language, Language field also has Chinese(ZH).
When i extract the Customer from ECC in the form of IDOC. In WE02 under ADRMAS segment i can see the data in Chinese Symbols (Which is Correct). But when the IDOC hits the XI server all chinese Charcters are changing to ###### Symbols in the Inbound Message and Outbound Message of XI.
So, in MDM Customer Repository record is getting created with ######, Which is not correct.
Scenario2:
In MDM if i create a Customer with Chinese Language say Name1, Street and so on.. Language is selected as Chinese.
When i syndicate the Record, data is going to XI and the Outbound Message of XI has Chinese Characters, but when i see the
in XD03 all the chinese Characters were converted to ####
From the two scenarios, i feel that there is some Configuration needs to be done in ECC. Correct me if i am Wrong.
Note:Unicode System for ECC 6.0 is marked as 'YES'
if any one has come across this knd of problem, please share what you have done to resolve this.
Let me know if any details you need.
Thanks
Sowseel

Hi Sowseel
in your senario you are facing problem on XI level there is nothing related to MDM as you specified that is once you syndicate records from MDM system Chiense Character (symbol) is diplaying and same from extracting data from ECC which means problem at XI level so you need to do some language settting on XI server level with help of XI and basis team
Senario as follows :
1. Just check IDOC at XI level i.e field contain Chiense charachter(Symbol) before posting IDOC to ECC
2. if IDOC has Chiense charachter(Symbol) at XI level before sending to ECC then problem at ECC level then in thus case you need to make neccesary language setting at ECC level not XI server level
Just test above senario and reply back if you are facing problem and closed this thread
Even i faced similer kind of issue at my client place and it got resolved with help of basis team by doing some setting at XI serve level
Thanks,
Jignesh Patel

Importing the Chinese language

Hello colleagues,
I have a problem with importing the Chinese language into the customer's system.
Setup: classic 3 system landscape ECC 6.0 on Windows X64 / SQL Server 2005. Defined clients on development: 302 & 303, acceptance: 200 & production: 100. Required languages: English, German & Chinese.
Importing English & German caused no problems. At first, importing the Chinese language seemed to be ok as well, but apparently their are some "missing" parts in the customer clients. Missing is not the right word, because I supplemented the Chinese language with English so that these missing parts appear in English when logged on in language ZH.
Now I found out that the Chinese translation for some of these parts does exist in client 000, for example the description of the different views in transaction MM03. I've checked table T133B and saw that for client 000 and language 1 (Chinese) the real Chinese translations were there. For client 302 or 303 and language 1, the descriptions are in English...
My question: how can I replace the current (supplemented) English translations in the customer clients with the "real" Chinese translations that exist in client 000? I've tried every available option in transaction SMLT (basic supplementation, expert supplementation, nsrefill, ...) but to no avail: the English texts are still there...
Thank you for your help and best regards,
Steven

Solved it by re-importing the entire language pack in client 000.

Import Chinese Language in IDES.

Hi Gurus!!!
We had Windows NT,SAP IDES ECC 6.0 on Oracle 10.2.Unicode System.
We want to import "Chinese" Language
So pls guide us,
How to Download & import Language Files???
Regards,
Amol

i'm note sure you can do this in an IDES. run tx. SMLT to check whether this is possible. check for restrictions on hardware/software/setup in service.sap.com/globalization. then download the language and install like described in the documentation.

Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support

Material descriptions in chinese language is not transferred to SRM

Hi All,
We have an issue in transfering material description in chinese language from ECC to SRM.
We are on SRM 5.5 and ECC 6.0
I've set filter in R3AC1 with Table name "matk" anf field "SPRAS" to take care of language.
This works fine for all language except chinese both for initial and delta down load.
Any help is greatly appreciated

Hi,
Which your support package?
Did you already seek OSS?
Rgs,
Pedro Marques

NW04s WAS 7.0 displays some texts in chinese language

I have installed NW04s ABAP instance (WAS 7.0)with all the default settings. When I logged in to the SAP system, I noticed that all the text messages are being shown in some Chinese language. Later I realized that, not only this screen but also all the screens have the same problems.Has anyone seen this kind of weird problem? Do you have any idea what is causing this? Any help in this regard will highly be appreciated.
Thanks
Rajan S

Are you saying that different language pack is installed in this system?. I checked through SMLT and noticed only two language support packages of GERMAN and ENGLISH are imported.Also verifed through I18N , the system has ENGLISH and GERMAN only. This is the default install and I have not installed any other language at all
Thanks for you help.

Error in Chinese language translation In Forms....

We have our application based on Oracle and d2k.
Standard language is English. Thus all the labels and data in the Form and in the Tables are in english language. Now we wish to generate one of the forms in chinese language which will change the labels in the form to chinese letters.
Approach we followed:
All the corresponding english lables in The Form Screen are generated in the Chinese language in the excel file. We have imported the .csv file with corrsponding lables in our schema. and the data is populated in the tables.
Problem encountered:
All the data in the tables is shown as junk values. ie, ???????
NLS_LANG has been set in the registry as
"TRADITIONAL Chinese_Hong Kong.UTF8".
I have this feeling that i am setting the wrong lang setting.
let me know if this is correct and what else can i check so that i can junk characters paves ways to chinese characters.
When i try to insert in the tables thro SQL.... it does not allow and the char are still ?????????????????????
Kindly suggest.

When i have done the changes as suggested by u, i am not able to launch SQL...
message is:
ORA-12705: invalid or Unknown NLS parameter value specified.
When i open google site.. the screens are in chinese .. this shows system has accepted the chinese character set.
My previous settings allowed me to connect to SQL but the data was junk characters like ???????????????

Chinese Language import issue

Hi All,
Need to import Chinese Language in 4.6C. Not sure if I am doing a mistake. Any help would be appreciated.
What I did was:
1. I first added ZH & ZF in SE38->RSCPINST and did the simulate and activate actions.
2. Then I imported the Chinese ZH Alone in SMLT and English as supplement (Since the language CD did not have ZF and I mistakenly added it in RSCPINST).
3. Now I go back to SE38->RSCPINST and delete ZF because I did not import it and click Simulate and then activate it does not do anything. It just gives me the following messages and does not go further.
<b>Do you want to change the databases entries?
Installed languages(in profiles):
ZH Chinese                     8400
DE German                      1100
EN English                     1100
JA Japanese                    8000
The country code (TCP0D):
    Latin1 or MDMP
Necessary code pages (TCPDB):
8400 Simplified Chinese
1100 SAP internal, like ISO 8859-1        (00697/00819)
8000 Shift JIS
TCPDB contains more than one code page!
1. Only the common subset of selected code pages can be used for global data.
2. Please read note 73606 on our Online Support System (OSS):
ftp://sapserv3/home/ftp/general/R3server/abap/note.0073606/document/maindocument.doc
Verify if following locales are installed on operating system:
coral_C13_00        Chinese_CHN.936
                    English_United States.1252
                    German_Germany.1252
                    Japanese_Japan.932
Profile parameters
Profile parameter                        Check result
                                  coral_C13_00
                                       O.K.
   Go back to the selection screen</b>
Even I click Activate the same thing happens and I am not able to login using Chinese language. What have I done wrong???
Please help.
Regards,
kp

issue resolved. thanks. it was OS locales issue.

Chinese language isntallation in ECC system

Similar Messages

Maybe you are looking for