Chipset 945PL = 945P Express ?
Due to a problem using MSI Live Update, I download an utility from Intel site to chk my chipset.
My MOBO is MSI Intel 945PL Neo, and stated in the spec the chipset is Intel 945PL. However the downloaded utility from Intel show me its 945P Express!
I dunno, is this I been fool\cheated, or the software may not be that accurate at all?
http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=861
Kelmen, 945PL has the "lower" spec of 945P; 945PL doesn't support 1066Mhz FSB. Intel chipset utility will group 945PL and 945P together because from driver standpoint they are the same. So as 945G and 945GV together, they are pretty much the same.
Don't worry you are not cheated. If you were, you're only getting the higher spec of the chipset, not lower. There is no slower or lower spec than 945PL.
Similar Messages
-
RTS5229 PCI Express Card Reader=Unassigned class [ff00] dv6t-7000
Hello everyone. I am having issues with the built-in card reader in my HP dv6t-7000. I know that this kind of question has been asked before, but I am unable to find a solution. I am new to Arch, but have used almost ALL other distros. Arch is the first Linux on my laptop. Now down to the details.
lscpi
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
0a:00.0 Network controller: Ralink corp. Device 539a
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)
lsusb
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 138a:0018 Validity Sensors, Inc.
Bus 003 Device 004: ID 05c8:033a Cheng Uei Precision Industry Co., Ltd (Foxlink)
The card reader class is Unassigned. Why? I followed this thread:
http://ubuntuforums.org/showthread.php?t=206464 and installed the realtek driver with no sucess. dmesg shows no changes. The card reader is basically ignored.
according to lsmod the module is active.
rts5229 299012
What should I do?more info :
lspci -vnn | grep -A5 RTS5229
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1818]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 71000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts5229
http://vincentlycheng.wordpress.com/201 … t-working/
same fix. Didn't work for me. Should I try rtsx_pci instead?
Last edited by ryanvade (2013-01-24 04:49:06) -
T420s Nvidia Graphics Card & Express Card Questions
Hello, and thank you for checking out my post. My apologies for writing a book, but I'm hoping to give as much detail as needed the first go round.
I just received my custom-built T420s (4170-CTO) and have a couple technical questions/concerns about it. The details of my configuration are located at the bottom of this post.
First off, one of the deciding factors of my purchase was the discrete graphics card. On the T420s I chose NVIDIA NVS 4200M Optimus Graphics 1GB, Intel Core i7-2620M Processor. I was thrilled to have more than 256 MB of dedicated graphics memory for my games. Upon receiving my laptop, though, I ran the Windows Experience Index and saw that the lowest score was the graphics card, which is identified as Intel HD Graphics Family and has 64 MB of dedicated graphics memory. After my heart started beating again I checked Device Manager and found under Display both Intel HD Graphics Family and NVIDIA NVS 4200M listed as working with up-to-date drivers. When I configured the laptop online there was no mention of hybrid graphics, so I'm not sure why I have an Intel Graphics card on the machine. My current laptop that I was looking to replace is a T61p with a NVIDIA Quadro FX 570M graphics card, and only that NVIDIA card is shown under Device Manager and in the Windows Experience / Performance Information. Thinking that perhaps disabling the Intel card would cause the NVIDIA card to take over, I disabled that through Device Manager. My screen went black and after feeling quite stupid I rebooted my computer. The default Windows Display driver kicked in, allowing me to see well enough to get back to Device Manager and enable the Intel Graphics. I counted myself lucky that I wasn't stuck with a working computer with a blank screen, but I'm still confused about why the NVIDIA card isn't the only display adapter on the machine, and why it isn't the default/main adapter. Most importantly, will it be usable to run my games?
My second question is regarding the PCI ExpressCard slot. My aim for this machine was to have a HDD to store my data (I selected the 320GB 7200 RPM HDD) and a SSD to boot and run my programs from. Another reason for choosing this machine was the comment on Lenovo's site stating that a user booted his T420s from a solid state drive in the PCI ExpressCard slot, which was exactly was I was looking for. I need the CD/DVD drive, so I can't put the second hard drive in a caddy. During configuration I chose the option for an Express Card Slot & 4 in 1 Card Reader & Smart Card Reader. From what I can tell, the Express Card slot is not connected to the Card Readers and I will not lose use of those ports. When I opened the computer up to install more RAM, I saw what is labeled in Lenovo's hardware manual as the Express Card slot, apparently empty - which is great! Now I need to figure out what kind of SSD to look for, and on that I'm kinda lost.
I'm guessing that my ExpressCard slot is 34mm and PCI form factor rather than USB... but I don't want to spend hundreds of dollars on a not-incredibly-educated guess. I'm also not sure where mSATA comes into play for me, if at all. Looking at SSDs on sites such as newegg.com, I'm unsure of what form factor to choose - ExpressCard, PCI-E, mSATA, and/or 1.8"?
The tech specs of my configured T420s (copy/pasted from the order status) are as follows. I hope this means more to you than it does to me.
Part #:
0A71709 VBB INTCRI7-2620MPR(2.7GHZ
45M3092 VBB GENWIN7HOMEPREM64 (which ultimately doesn't matter as I'll be booting from Windows 7 Enterprise on my SSD)
0A68718 SBB GW7 HP64 US ENGLISH
0A68976 SBB 14HD+LDBCKLTANTGLDSPMBBBRD
0A68972 SBB NVD12PNS2OPG1GBICI7-2620MP
45M4569 VBB 2GBPC3-10600DDR3 1333SODMM (which has been removed and replaced by two 4GB sticks)
0A68978 SBB FINGERPRINT READER
0A68993 SBB 720P HD CAM+INTGR MCRPH
0A68990 SBB 320GB HRD DSK DRVE,7200RPM (will be used for storage and as a backup boot device)
0A68985 SBB DVD RCRDBL8XMXDLLRULTRBSLM
0A68996 SBB EXCRSLOT+4IN1CRDRD+STCRDRD
0A68261 SBB BLUETOOTH 3.0
45M4805 SBB IN.CENTADV.-N+WIMAX 6250
44C7950 SBB INT WRLSSWDAREANTWRK UPGR
In Device Manager I see the following related (I think) devices located under System Device:
Intel 6 Series / C200 Series Chipset Family PCI Express Root Ports 2 (1C12), 4 (1C16), 5 (1C18), and 1 (1C10)
Intel 6 Series / C200 Series Chipset Family SMBus Controller 1C22
Intel QM67 Express Chipset Family LPC Interface Controller - 1C4F
PCI bus
2nd generation Intel Core processor family DRAM Controller - 0104
2nd generation Intel Core processor family PCI Express Conroller - 0101
Whew. Thanks for making it through my book-long post. If you can offer advice on either of my questions/concerns I'd really appreciate it.
Thanks!
LaurenThe T420s with Nvidia GPU has two graphics card that can switch on the fly, if you only want the discrete gpu, just go into your bios menu under graphics there is an option to select discrete.
With the Nvidia Optimus (which is what you have), it can switch between Nvidia and Intel GPU depending on your application needs. This will allow you to conserve battery or power.
Expresscard slot 34 mm slot is occupied by the card reader that you ordered.
What you are talking about within the ram slot cover, is the mPCIe slot, which can be occupied by a mSATA drive.
http://forum.lenovo.com/t5/T400-T500-and-newer-T-series/T420s-T400s-T410s-removal-of-4-in-1-SD-card-...
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Crappy BIOS on MSI 945P boards? Any chance getting better?
Hi all, I've already wrote it on different place but I'd like to know an answer, that's why I write it to a new thread.
I've got two MSI mainboards, both with the same chipset Intel 945P, just the bios differs; one AWARD the other AMIBIOS. Neverthless, both of them are experiencing similar problems in overclocking the CPU.
(1) MSI 945P Neo2-F and Intel P4 630 (Prescott, single core). My BIOS behaves "randomly" after changing the FSB. Other components offer a good reserve of performance and I am sure the CPU too. When increasing the FSB value for more than 15MHz, on reboot the system hangs and the original (200MHz) value is restored. If the FSB exceeds some 224MHz it always hangs and restores 200MHz. That mobo has an AMI Bios. No update seems to be available, as the MSI Live Update doesn't work (the server is probably down).
Even worse it is with a (2) MSI 945P Neo and the same CPU, with an Award Bios. The overclocking is also impossible. When the FSB value changed by just 1-2MHz, the system hangs on reboot and even though the manual claims that after 4 unsuccesfull attempts to boot it will restore defaults it won't. The only way is to open the case and remove the jumper to clear CMOS.
Though there's a possibility to overclock - through MSI Core center. Surprisingly, the same version of MSI CC offers different possibilities for each of the motherboards. (1) is overclockable just like 1%,3% .. 11% while for (2) it offers to change FSB by MHz and without limits.
That piece of software is crappy enough though and it is practically unusable, because on system reboot or power down it randomily (again) restores the original 200MHz FSB value.
I managed to oveclock P4 630 up to 4GHz without any problem by using MSI CC on (2) but annoyed by the issue described above, I decided not to use that kind of software.
According to other places on web, there are more guys around having the same troubles like me with 945P BIOSes, mainly what concerns OC. Here is my question: is there any chance that MSI will release a BIOS fixing this bug? Is there someone responsible for this so that I can report him the problems and he'll put some efforts in solving that issue or working on a new BIOS?
Thank you all who can help!Quote from: kuni on 30-August-06, 16:19:09
Made some progress in understanding the problem.. I tried all possible BIOses, the FSB-PCIE sync/async didn't show in any of them except the oldest one. (it's a 1.0D BIOS version). When trying to OC with that BIOS, the same problems arose..PC locked up and even clear CMOS didn't help. So I went to our PC custommer service for a help. They changed CPU for a celeron and surprisingly, the PC worked like a charm, even FSB-PCIE sync/async appeared and I am sure there wouldn't be any problems with OC. Then they tried a different p4 630 and the problems were back. So it's obvious that the 945 based mobos from MSI don't deal with some CPUs correctly. I've already sent this to MSI but don't expect a fix for this.. luckily they gave me an ASUS for the same money instead and hope the problems aren't that of intel chipset as a whole but just that of MSI boards.. regards, Kuni.
P.S. if your mobo is still under warranty and wanna try to "hoax" your PC dealers for getting a new mobo like me, I can provide the old BIOS or just demand the MSI custommer service for w7176ims.10D
ok, i have checked the 1.5 BIOS from the link that kuni posted and CPU FSB & PCI-E is indeed hidden, but is set from default to async. all in all the features that are hidden in the 1.5 BIOS are already set at the best settings, so i don't see this as being a problem. -
Z97 Gaming 3 chipset driver issue. Any ideas?
Hey peeps!:)
I got the Z97 Gaming 3 mobo. Installed every driver from MSI's website.
But when I look up at the device manager the system devices... the:
-Intel(R) Z97 Chipset LPC Controller - 8CC4
- Intel(R) 9 Series Chipset Family PCI Express Root Port 1 - 8C90
- Intel(R) 9 Series Chipset Family PCI Express Root Port 3 - 8C94
- Intel(R) 9 Series Chipset Family SMBus Host Controller - 8CA2
- Intel(R) 4th Gen Core processor DRAM Controller - 0C00
Are still uses the Microsoft version driver from the date 2006.06.21, driver verion : 6.3.9600.17031
I installed the chipset several times, restarted the PC. No help at all. Tried to manually install the
driver, and browse the driver from hard drive. When it finishes, its says:
"The best driver for your device is already installed"
Anyone with the same problem? Any ideas guys?:Sits happen to everyone who own z97 or any 9 series chipset. after installing "latest chipset driver" either downloaded from msi or from intel website, device manager still shows that drivers is taken from microsoft and dated 2006.
until intel fixed their crap drivers, nothing that we can do. -
Hello,
I bought an MSI 945P Neo2-F a couple months back and when I did, the salesclerk had told me that with a BIOS update, it would support Core 2 Duo....looking online now, it doesn't appear that is the case. Was this guy full of crap or is there indeed a way to do this?
Sorry if this question has been asked before, I couldn't find it searching the forums.maybe the seller was right ...
watch this http://www.intel.com/products/chipsets/945p/index.htm ...
"Platforms based on the Intel® 945P Express Chipset, combined with the Intel® Core™2 Duo processor, deliver innovative features and new benefits for both home and business."
so if you have chipset 945P - maybe you are now happy owner
but i dont know if is here some bios in version good enought for C2D .. you have MSI so dont wait for miracles -
Is KVM VGA Passthrough Possible on Macbook Pro Mid 2014?
I've been using Arch on and off for a couple years on different hardware, and this time I'm trying to get it to work semi-flawlessly on my mid 2014 Macbook Pro. My Linux skills are meager, so I need some help understanding if VGA passthrough is possible on this machine, and if it is, how to set it up. I have hope that it might work after reading this blog and the Arch forums. An outline of my current setup follows. I will also document progress and research for anyone who might want to try this in the future.
Here are the specifications for this machine:
Processor: 2.5 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Graphics: Intel Iris Pro 1536 MB, Nvidia GT 750M 2 GB
I have successfully dual-booted Mac OS X Yosemite and Arch with EFI on a btrfs partition using this blog and the wiki as starting points. Somlo's research also helped. All the basic functionality works (networking, WiFi, etc.), and I am able to boot the physical Arch partition as a Virtualbox VM with the help of the wiki. However, I'm having trouble with getting the integrated Intel graphics to work. The following command:
lspci | grep VGA
prints the Nvidia card specifications, and nothing about the Intel graphics.
Reading this blog, it looks like someone had to apply a "grub gmux" patch to grub to disable the Nvidia card at boot. I feel uncomfortable installing anything other than the official Arch packages, so I have to know if installing a patched grub is still necessary, and if installing it would still allow me to use VGA passthrough in KVM.
My ambitious to-do list looks like this:
1. Dual-boot Mac OS X and Arch with btrfs. -done
2. Setup the physical Arch partition to boot in Virtualbox. -done
3. Get Intel graphics to work on Arch ideally with OpenGL support. -done
4. Get Enlightenment working as the desktop environment on Arch. -done
5. Get Qemu+KVM to boot off the physical Mac OS X partition. -tbd
6. Enable VGA passthrough for Mac OS X from Qemu+KVM. -tbd
7. Install Windows as a VM in Qemu+KVM. -tbd
8. Enable VGA passthrough for Windows from Qemu+KVM. -tbd
9. Work and do research on Mac OS X from Arch, play hardcore 3D games on WIndows from Arch, play around with Arch, and live happily ever after. -tbd
Can anyone help me with this? Thanks in advance for any hints/input.
Edit:
The Ubuntu forums has something about getting the two graphics cards to be recognised by using `refind` instead of `grub`. I was able to set up `refind` to boot using the `efi-stub`, but:
$ lspci
00:00.0 Host bridge: Intel Corporation Crystal Well DRAM Controller (rev 08)
00:01.0 PCI bridge: Intel Corporation Crystal Well PCI Express x16 Controller (rev 08)
00:01.1 PCI bridge: Intel Corporation Crystal Well PCI Express x8 Controller (rev 08)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M Mac Edition] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4360 802.11ac Wireless Network Adapter (rev 03)
04:00.0 Multimedia controller: Broadcom Corporation 720p FaceTime HD Camera
05:00.0 SATA controller: Samsung Electronics Co Ltd Apple PCIe SSD (rev 01)
06:00.0 PCI bridge: Intel Corporation Device 156d
07:00.0 PCI bridge: Intel Corporation Device 156d
07:03.0 PCI bridge: Intel Corporation Device 156d
07:04.0 PCI bridge: Intel Corporation Device 156d
07:05.0 PCI bridge: Intel Corporation Device 156d
07:06.0 PCI bridge: Intel Corporation Device 156d
08:00.0 System peripheral: Intel Corporation Device 156c
still only shows the Nvidia card. The boot options suggested by this blog did not change anything. However, this very helpful discussion led me to this on-going project. I patched the kernel according the instructions in the said project's `readme`, and Arch is now able to see the two graphics cards and an extra Intel audio controller.
$ lspci
00:02.0 VGA compatible controller: Intel Corporation Crystal Well Integrated Graphics Controller (rev 08)[/bold]
00:03.0 Audio device: Intel Corporation Crystal Well HD Audio Controller (rev 08)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M Mac Edition] (rev a1)
Also, I was able to fire up Enlightenment using the Intel graphics card and `0xbb`'s `gpu-switch` script. After using some post-installation tips from this, the computer started getting hot. I followed this thread to get it back to normal.
Edit:
So I finally got some time to experiment on this. I ended up installing Gnome 3 after trying out Enlightenment, KDE Plasma 5, and Cinnamon. I thought Gnome 3 and Cinnamon had the best Hi-DPI support of those four. Cinnamon's look was too much trouble for me to configure, so I ended up choosing Gnome 3.
To achieve the graphics card passthrough, I tried setting up and starting a VM in `virt-manager`, but starting the VM would cause Arch to freeze. Finally, I tried following the instructions on the wiki, this thread, and the Arch forums. I haven't yet tried booting the Windows installer, but the following are the steps I took so far:
1. Uninstall all `nvidia` drivers from my system.
2. Blacklist the `nouveau` driver.
3. Add `pci-stub` to the modules array in `mkinitcpio.conf`.
4. Recreate the `initramfs`.
5. Add `intel_iommu=on pci-stub.ids=10de:0fe9,10de:0e1b,8086:156c` to the `refind.conf` `options` line.
- These three IDs are ones for the Nvidia graphics, Nvidia sound, and the "Intel Corporation Device" (probably the HDMI port, or something related to the
ethernet card), which belong to the same "IOMMU group". What was curious was that a Gigabit ethernet controller would appear in the IOMMU group iff I had
an ethernet cable connected to my thunderbolt port. I don't know if I have to add the ID for this, but so far there are no complaints about it in `dmesg`.
6. Install `ovmf-svn` from the AUR.
6. Follow the "Binding a device to vfio-pci" section documented at https://bbs.archlinux.org/viewtopic.php?id=162768.
7. Follow the "Testing if its working out" section documented at https://bbs.archlinux.org/viewtopic.php?id=162768.
So far, the test at step 7 is failing -- I get a `vfio-pci 0000:01:00.0: Invalid ROM contents` complaint in `dmesg`, and I see a prompt in the `qemu` window. I'm supposed to be getting a black `qemu` window, and a prompt on an external monitor which I haven't connected yet. I read the comments on this blog about graphics card ROM and EFI compatibility, and it looks like my graphics card ROM can't be read. I also read that the graphics card ROM would only be read once by qemu/KVM and saved as a file for later use, so all I need to do to get around that is pass a snapshot of the ROM of the Nvidia GT 750M card to qemu/KVM. Apparently, "You can download the 750m rom files directly from Lenovo's website on the support page" according to this thread, but all I see is this. I will continue hunting around for a ROM file for this graphics card.
Last edited by rb3 (2015-06-05 02:01:20)It`s not beacuse of the case. I have the same problem with a macbook pro retina 15 late 2013 (I7 - 2.3 Ghz, 16 GB, 512 SSD, GT750M) with windows 8.1 on bootcamp. The temperature is higher than yosemite. It gets easily at 80 celsius in a demanding game, while on yosemite it barely reaches 55-60 under heavy load. It`s beacuse of windows, and these are the temperatures, I got the same average 55-60 in windows and 45 celsius in yosemite. I read on the forums and I tried evend with a cooler pad. But it doesn`t seem to be any improvement with lowering the temperature in windows.
-
Blue screen of death on Toshiba P755-S5375 with ADOBE ENCORE CS6
I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64
Crash details:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1041
Additional information about the problem:
BCCode: d1
BCP1: 0000000000000001
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ?? ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
00000000`00000001 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ?? ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwnerSatellite A215-S7422
We need to know the Stop code on the blue screen. If there is a file name mentioned, we want that too.
You can prevent the rapid disappearance of the blue screen during a normal boot by choosing this at the F8 Startup menu.
Disable automatic restart on system failure
-Jerry -
Hi Guys, I have a Medion Erazer X6823 which is based on the chassis / motherboard of the MSI GT60.
I am just wondering if it would be possible to flash a MSI bios on this notebook ?
What info would I need to give to svet ? also how do I back up my bios ?
Code: [Select]
System Information
Time of this report: 8/26/2013, 12:34:40
Machine name: ERAZER
Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130531-1504)
Language: English (Regional Setting: English)
System Manufacturer: MEDION
System Model: X682X
BIOS: E16F3IM7.50H
Processor: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (8 CPUs), ~2.4GHz
Memory: 6144MB RAM
Available OS Memory: 6036MB RAM
Page File: 2494MB used, 3740MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.02.9200.16384 64bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Display Tab 2: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: Intel(R) HD Graphics 4000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Type: Full Device
Device Key: Enum\PCI\VEN_8086&DEV_0166&SUBSYS_10D91462&REV_09
Display Memory: 1792 MB
Dedicated Memory: 32 MB
Shared Memory: 1760 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: P235H
Monitor Id: ACR00CB
Native Mode: 1920 x 1080(p) (75.003Hz)
Output Type: HDMI
Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Driver File Version: 9.18.0010.3165 (English)
Driver Version: 9.18.10.3165
DDI Version: 11
Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
Driver Model: WDDM 1.2
Graphics Preemption: DMA
Compute Preemption: Thread group
Driver Attributes: Final Retail
Driver Date/Size: 5/7/2013 17:22:46, 8632320 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B78E66-4226-11CF-AA7D-D430B4C2C435}
Vendor ID: 0x8086
Device ID: 0x0166
SubSys ID: 0x10D91462
Revision ID: 0x0009
Driver Strong Name: oem12.inf:5f63e5341859ec8c:iIVBM_w8:9.18.10.3165:pci\ven_8086&dev_0166
Rank Of Driver: 00E02001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C
DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeWMV9_IDCT DXVA2_ModeVC1_IDCT DXVA2_ModeH264_VLD_NoFGT
Deinterlace Caps: {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Card name: Intel(R) HD Graphics 4000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Type: Full Device
Device Key: Enum\PCI\VEN_8086&DEV_0166&SUBSYS_10D91462&REV_09
Display Memory: 1792 MB
Dedicated Memory: 32 MB
Shared Memory: 1760 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: AUO21EC
Native Mode: 1366 x 768(p) (60.072Hz)
Output Type: Internal
Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Driver File Version: 9.18.0010.3165 (English)
Driver Version: 9.18.10.3165
DDI Version: 11
Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
Driver Model: WDDM 1.2
Graphics Preemption: DMA
Compute Preemption: Thread group
Driver Attributes: Final Retail
Driver Date/Size: 5/7/2013 17:22:46, 8632320 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B78E66-4226-11CF-AA7D-D430B4C2C435}
Vendor ID: 0x8086
Device ID: 0x0166
SubSys ID: 0x10D91462
Revision ID: 0x0009
Driver Strong Name: oem12.inf:5f63e5341859ec8c:iIVBM_w8:9.18.10.3165:pci\ven_8086&dev_0166
Rank Of Driver: 00E02001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C
DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeWMV9_IDCT DXVA2_ModeVC1_IDCT DXVA2_ModeH264_VLD_NoFGT
Deinterlace Caps: {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (Realtek High Definition Audio)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_146210D2&REV_1003
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.6690 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 10/5/2012 01:36:34, 4097808 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (Realtek High Definition Audio)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.6690 (English)
Driver Attributes: Final Retail
Date and Size: 10/5/2012 01:36:34, 4097808 bytes
Cap Flags: 0x0
Format Flags: 0x0
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Radio Switch Device
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x0CF2, 0x9010
FF Driver: n/a
Device Name: MotioninJoy Virtual Game Controller
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x8888, 0x0008
FF Driver: n/a
Device Name: MSI EPF USB
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x1770, 0xFF00
FF Driver: n/a
Device Name: Saitek Eclipse Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x8020
FF Driver: n/a
Device Name: MotioninJoy Virtual Game Controller
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x8888, 0x0008
FF Driver: n/a
Device Name: Saitek Eclipse Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x8020
FF Driver: n/a
Device Name: Saitek Eclipse Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x8020
FF Driver: n/a
Device Name: Controller (Xbox 360 Wireless Receiver for Windows)
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x045E, 0x02A1
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x1E26
| Matching Device ID: USB\ROOT_HUB20
| Service: usbhub
| Driver: usbhub.sys, 2/2/2013 04:19:44, 496872 bytes
| Driver: usbd.sys, 9/20/2012 00:55:32, 21736 bytes
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x8087, 0x0024
| | Location: Port_#0001.Hub_#0002
| | Matching Device ID: USB\Class_09
| | Service: usbhub
| | Driver: usbhub.sys, 2/2/2013 04:19:44, 496872 bytes
| | Driver: usbd.sys, 9/20/2012 00:55:32, 21736 bytes
Gameport Devices
PS/2 Devices
+ PC/AT Enhanced PS/2 Keyboard (101/102-Key)
| Matching Device ID: *PNP030B
| Service: i8042prt
| Driver: i8042prt.sys, 7/25/2012 19:28:51, 112640 bytes
| Driver: kbdclass.sys, 7/25/2012 22:00:52, 48368 bytes
|
+ HID Keyboard Device
| Vendor/Product ID: 0x06A3, 0x8020
| Matching Device ID: HID_DEVICE_SYSTEM_KEYBOARD
| Service: kbdhid
| Driver: kbdhid.sys, 7/25/2012 19:28:49, 29184 bytes
| Driver: kbdclass.sys, 7/25/2012 22:00:52, 48368 bytes
|
+ HID Keyboard Device
| Vendor/Product ID: 0x8888, 0x0208
| Matching Device ID: HID_DEVICE_SYSTEM_KEYBOARD
| Service: kbdhid
| Driver: kbdhid.sys, 7/25/2012 19:28:49, 29184 bytes
| Driver: kbdclass.sys, 7/25/2012 22:00:52, 48368 bytes
|
+ HID Keyboard Device
| Vendor/Product ID: 0x8888, 0x0208
| Matching Device ID: HID_DEVICE_SYSTEM_KEYBOARD
| Service: kbdhid
| Driver: kbdhid.sys, 7/25/2012 19:28:49, 29184 bytes
| Driver: kbdclass.sys, 7/25/2012 22:00:52, 48368 bytes
|
+ HID-compliant mouse
| Vendor/Product ID: 0x8888, 0x0108
| Matching Device ID: HID_DEVICE_SYSTEM_MOUSE
| Service: mouhid
| Driver: mouhid.sys, 3/1/2013 19:15:53, 26112 bytes
| Driver: mouclass.sys, 7/25/2012 22:00:55, 45808 bytes
|
+ PS/2 Compatible Mouse
| Matching Device ID: *PNP0F13
| Service: i8042prt
| Driver: i8042prt.sys, 7/25/2012 19:28:51, 112640 bytes
| Driver: mouclass.sys, 7/25/2012 22:00:55, 45808 bytes
|
+ HID-compliant mouse
| Vendor/Product ID: 0x8888, 0x0108
| Matching Device ID: HID_DEVICE_SYSTEM_MOUSE
| Service: mouhid
| Driver: mouhid.sys, 3/1/2013 19:15:53, 26112 bytes
| Driver: mouclass.sys, 7/25/2012 22:00:55, 45808 bytes
|
+ Cyborg R.A.T.3 Mouse (HID)
| Vendor/Product ID: 0x06A3, 0x0CCC
| Matching Device ID: hid\vid_06a3&pid_0ccc
| Lower Filters: SaiK0CCC
| Service: mouhid
| Driver: SaiK0CCC.sys, 4/29/2010 09:36:20, 171016 bytes
| Driver: mouhid.sys, 3/1/2013 19:15:53, 26112 bytes
| Driver: mouclass.sys, 7/25/2012 22:00:55, 45808 bytes
| Driver: WdfCoInstaller01005.dll, 4/29/2010 09:36:20, 1919968 bytes
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 72.9 GB
Total Space: 113.9 GB
File System: NTFS
Model: Samsung SSD 840 Series
Drive: D:
Free Space: 86.2 GB
Total Space: 120.0 GB
File System: NTFS
Model: HITACHI HTS727575A9E364
Drive: E:
Free Space: 463.2 GB
Total Space: 594.8 GB
File System: NTFS
Model: HITACHI HTS727575A9E364
Drive: Z:
Free Space: 0.7 GB
Total Space: 1.0 GB
File System: FAT32
Model: n/a
Drive:
Model: TSSTcorp CDDVDW SN-208BB
Driver: c:\windows\system32\drivers\cdrom.sys, 6.02.9200.16384 (English), 7/25/2012 19:26:36, 174080 bytes
System Devices
Name: Intel(R) HM77 Express Chipset LPC Controller - 1E57
Device ID: PCI\VEN_8086&DEV_1E57&SUBSYS_10D21462&REV_04\3&11583659&0&F8
Driver: C:\Windows\system32\DRIVERS\msisadrv.sys, 6.02.9200.16384 (English), 7/25/2012 22:00:55, 17136 bytes
Name: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D
Device ID: PCI\VEN_8086&DEV_1E2D&SUBSYS_10D21462&REV_04\3&11583659&0&D0
Driver: C:\Windows\system32\drivers\usbehci.sys, 6.02.9200.16420 (English), 9/20/2012 00:55:32, 79080 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 00:55:33, 488168 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 04:19:44, 496872 bytes
Name: NVIDIA GeForce GTX 670MX
Device ID: PCI\VEN_10DE&DEV_11A1&SUBSYS_10D91462&REV_A1\4&86F2CBB&0&0008
Driver: C:\Program Files\NVIDIA Corporation\Drs\dbInstaller.exe, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 250144 bytes
Driver: C:\Program Files\NVIDIA Corporation\Drs\nvdrsdb.bin, 8/18/2013 14:02:58, 1142408 bytes
Driver: C:\Windows\System32\DriverStore\FileRepository\nvmin.inf_amd64_3a550b5e132005ae\NvCplSetupInt.exe, 1.00.0001.0000 (English), 8/18/2013 14:02:58, 74262424 bytes
Driver: C:\Program Files (x86)\NVIDIA Corporation\coprocmanager\Nvd3d9wrap.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 322592 bytes
Driver: C:\Program Files (x86)\NVIDIA Corporation\coprocmanager\detoured.dll, 8/18/2013 14:02:58, 13088 bytes
Driver: C:\Program Files (x86)\NVIDIA Corporation\coprocmanager\nvdxgiwrap.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 226296 bytes
Driver: C:\Program Files\NVIDIA Corporation\coprocmanager\Nvd3d9wrapx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 365376 bytes
Driver: C:\Program Files\NVIDIA Corporation\coprocmanager\detoured.dll, 8/18/2013 14:02:58, 13088 bytes
Driver: C:\Program Files\NVIDIA Corporation\coprocmanager\nvdxgiwrapx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 265960 bytes
Driver: C:\Program Files\NVIDIA Corporation\license.txt, 8/18/2013 14:02:58, 21898 bytes
Driver: C:\Program Files\NVIDIA Corporation\NVSMI\MCU.exe, 1.00.4647.21994 (English), 8/18/2013 14:02:58, 1562400 bytes
Driver: C:\Program Files\NVIDIA Corporation\NVSMI\nvdebugdump.exe, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 217376 bytes
Driver: C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.1.pdf, 8/18/2013 14:02:58, 48843 bytes
Driver: C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 315680 bytes
Driver: C:\Program Files\NVIDIA Corporation\NVSMI\nvml.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 543008 bytes
Driver: C:\Program Files\NVIDIA Corporation\OpenCL\OpenCL.dll, 1.00.0000.0000 (English), 8/18/2013 14:02:58, 53024 bytes
Driver: C:\Program Files\NVIDIA Corporation\OpenCL\OpenCL64.dll, 1.00.0000.0000 (English), 8/18/2013 14:02:58, 61216 bytes
Driver: C:\Windows\system32\DRIVERS\nvlddmkm.sys, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 11271968 bytes
Driver: C:\Windows\system32\DRIVERS\nvpciflt.sys, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 30496 bytes
Driver: C:\Windows\system32\NvFBC64.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 681760 bytes
Driver: C:\Windows\system32\NvIFR64.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 603424 bytes
Driver: C:\Windows\system32\nvEncodeAPI64.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 458528 bytes
Driver: C:\Windows\system32\nvapi64.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 2986672 bytes
Driver: C:\Windows\system32\nvcompiler.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 25256224 bytes
Driver: C:\Windows\system32\nvcuda.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 9281032 bytes
Driver: C:\Windows\system32\nvcuvenc.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 2007328 bytes
Driver: C:\Windows\system32\nvcuvid.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 2970400 bytes
Driver: C:\Windows\system32\nvd3dumx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 15703176 bytes
Driver: C:\Windows\system32\nvinfo.pb, 8/18/2013 14:02:58, 22581 bytes
Driver: C:\Windows\system32\nvinitx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 168616 bytes
Driver: C:\Windows\system32\nvoglshim64.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 317472 bytes
Driver: C:\Windows\system32\nvoglv64.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 29337376 bytes
Driver: C:\Windows\system32\nvopencl.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 7648000 bytes
Driver: C:\Windows\system32\nvumdshimx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 1412832 bytes
Driver: C:\Windows\system32\nvwgf2umx.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 15900936 bytes
Driver: C:\Windows\SysWow64\NvFBC.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 586016 bytes
Driver: C:\Windows\SysWow64\NvIFR.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 515360 bytes
Driver: C:\Windows\SysWow64\nvEncodeAPI.dll, 6.14.0013.2680 (English), 8/18/2013 14:02:58, 388384 bytes
Driver: C:\Windows\SysWow64\nvapi.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 2630304 bytes
Driver: C:\Windows\SysWow64\nvcompiler.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 17560352 bytes
Driver: C:\Windows\SysWow64\nvcuda.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 7720576 bytes
Driver: C:\Windows\SysWow64\nvcuvenc.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 2007328 bytes
Driver: C:\Windows\SysWow64\nvcuvid.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 2789152 bytes
Driver: C:\Windows\SysWow64\nvd3dum.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 12946848 bytes
Driver: C:\Windows\SysWow64\nvinit.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 141336 bytes
Driver: C:\Windows\SysWow64\nvoglshim32.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 266984 bytes
Driver: C:\Windows\SysWow64\nvoglv32.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 22101792 bytes
Driver: C:\Windows\SysWow64\nvopencl.dll, 8.17.0013.2680 (English), 8/18/2013 14:02:58, 6329552 bytes
Driver: C:\Windows\SysWow64\nvumdshim.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 1222824 bytes
Driver: C:\Windows\SysWow64\nvwgf2um.dll, 9.18.0013.2680 (English), 8/18/2013 14:02:58, 13627696 bytes
Driver: C:\Windows\system32\nvdispco6432680.dll, 2.00.0036.0004 (English), 8/18/2013 14:02:58, 1884448 bytes
Driver: C:\Windows\system32\nvdispgenco6432680.dll, 2.00.0017.0002 (English), 8/18/2013 14:02:58, 1511712 bytes
Name: Xeon(R) processor E3-1200 v2/3rd Gen Core processor PCI Express Root Port - 0151
Device ID: PCI\VEN_8086&DEV_0151&SUBSYS_10D21462&REV_09\3&11583659&0&08
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 22:00:55, 234224 bytes
Name: 3rd Gen Core processor DRAM Controller - 0154
Device ID: PCI\VEN_8086&DEV_0154&SUBSYS_10D21462&REV_09\3&11583659&0&00
Driver: n/a
Name: Intel(R) Centrino(R) Wireless-N 2230
Device ID: PCI\VEN_8086&DEV_0887&SUBSYS_40628086&REV_C4\4&6D7534C&0&00E2
Driver: C:\Windows\system32\DRIVERS\NETwew00.sys, 15.05.0000.0043 (English), 8/19/2012 14:53:16, 4273192 bytes
Driver: C:\Windows\system32\DRIVERS\Netwfw00.dat, 8/19/2012 14:51:44, 6174952 bytes
Driver: C:\Windows\system32\Netwcw00.dll, 15.01.0000.0011 (English), 2/16/2012 23:34:58, 885520 bytes
Driver: C:\Windows\system32\Netwrw00.dll, 15.01.0000.0011 (English), 2/16/2012 23:35:00, 3381008 bytes
Driver: C:\Windows\system32\drivers\vwifibus.sys, 6.02.9200.16384 (English), 7/25/2012 19:27:54, 24064 bytes
Name: Intel(R) 7 Series/C216 Chipset Family SMBus Host Controller - 1E22
Device ID: PCI\VEN_8086&DEV_1E22&SUBSYS_10D21462&REV_04\3&11583659&0&FB
Driver: n/a
Name: Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 5 - 1E18
Device ID: PCI\VEN_8086&DEV_1E18&SUBSYS_10D21462&REV_C4\3&11583659&0&E4
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 22:00:55, 234224 bytes
Name: Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10
Device ID: PCI\VEN_8086&DEV_1E10&SUBSYS_10D21462&REV_C4\3&11583659&0&E0
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 22:00:55, 234224 bytes
Name: Intel(R) HD Graphics 4000
Device ID: PCI\VEN_8086&DEV_0166&SUBSYS_10D91462&REV_09\3&11583659&0&10
Driver: C:\Windows\system32\DRIVERS\igdkmd64.sys, 9.18.0010.3165 (English), 5/7/2013 17:22:42, 4431840 bytes
Driver: C:\Windows\system32\igd10iumd64.dll, 9.18.0010.3165 (English), 5/7/2013 17:22:42, 9967616 bytes
Driver: C:\Windows\system32\igdusc64.dll, 9.18.0010.3165 (English), 5/7/2013 17:12:18, 4369920 bytes
Driver: C:\Windows\system32\igfxcmrt64.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 145920 bytes
Driver: C:\Windows\system32\igfx11cmrt64.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 138240 bytes
Driver: C:\Windows\system32\igfxcmjit64.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 2064896 bytes
Driver: C:\Windows\system32\IccLibDll_x64.dll, 4/30/2013 10:43:42, 94208 bytes
Driver: C:\Windows\system32\igdde64.dll, 5/7/2013 17:22:42, 286720 bytes
Driver: C:\Windows\SysWow64\igdde32.dll, 5/7/2013 17:20:26, 240640 bytes
Driver: C:\Windows\system32\iglhxs64.vp, 5/7/2013 17:24:00, 17610 bytes
Driver: C:\Windows\system32\iglhxo64.vp, 4/30/2013 10:43:44, 44025 bytes
Driver: C:\Windows\system32\iglhxc64.vp, 4/30/2013 10:43:44, 43494 bytes
Driver: C:\Windows\system32\iglhxg64.vp, 4/30/2013 10:43:44, 43256 bytes
Driver: C:\Windows\system32\iglhxo64_dev.vp, 4/30/2013 10:43:44, 42079 bytes
Driver: C:\Windows\system32\iglhxc64_dev.vp, 4/30/2013 10:43:44, 43816 bytes
Driver: C:\Windows\system32\iglhxg64_dev.vp, 4/30/2013 10:43:44, 43298 bytes
Driver: C:\Windows\system32\iglhxa64.vp, 4/30/2013 10:43:44, 1125 bytes
Driver: C:\Windows\system32\iglhxa64.cpa, 4/30/2013 10:43:44, 2813952 bytes
Driver: C:\Windows\system32\iglhcp64.dll, 3.00.0001.0026 (English), 4/30/2013 10:43:42, 216064 bytes
Driver: C:\Windows\system32\iglhsip64.dll, 9.00.0000.1244 (English), 4/30/2013 10:43:42, 861184 bytes
Driver: C:\Windows\SysWow64\igdusc32.dll, 9.18.0010.3165 (English), 5/7/2013 17:12:30, 3411456 bytes
Driver: C:\Windows\SysWow64\igd10iumd32.dll, 9.18.0010.3165 (English), 5/7/2013 17:20:26, 9517056 bytes
Driver: C:\Windows\SysWow64\igdumdim32.dll, 9.18.0010.3165 (English), 5/7/2013 17:20:28, 7836160 bytes
Driver: C:\Windows\SysWow64\igdail32.dll, 5/7/2013 17:20:24, 103936 bytes
Driver: C:\Windows\SysWow64\igfxdv32.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:44, 353792 bytes
Driver: C:\Windows\SysWow64\iglhcp32.dll, 3.00.0001.0026 (English), 4/30/2013 10:43:42, 180224 bytes
Driver: C:\Windows\SysWow64\iglhsip32.dll, 9.00.0000.1244 (English), 4/30/2013 10:43:42, 856576 bytes
Driver: C:\Windows\SysWow64\IntelCpHeciSvc.exe, 9.00.0000.1340 (English), 6/5/2013 17:47:52, 279024 bytes
Driver: C:\Windows\SysWow64\igfxcmrt32.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 124416 bytes
Driver: C:\Windows\SysWow64\igfx11cmrt32.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 118784 bytes
Driver: C:\Windows\SysWow64\igfxcmjit32.dll, 3.00.0000.1006 (English), 4/30/2013 10:43:42, 1814016 bytes
Driver: C:\Windows\system32\difx64.exe, 1.04.0001.0000 (English), 6/5/2013 17:47:46, 153072 bytes
Driver: C:\Windows\system32\hccutils.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 108032 bytes
Driver: C:\Windows\system32\igfxsrvc.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 66048 bytes
Driver: C:\Windows\system32\igfxsrvc.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:50, 529904 bytes
Driver: C:\Windows\system32\igfxpph.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 357888 bytes
Driver: C:\Windows\system32\igfxcpl.cpl, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 124928 bytes
Driver: C:\Windows\system32\igfxdev.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 440320 bytes
Driver: C:\Windows\system32\igfxdo.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 140288 bytes
Driver: C:\Windows\system32\igfxtray.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:50, 165872 bytes
Driver: C:\Windows\system32\hkcmd.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:48, 407536 bytes
Driver: C:\Windows\system32\igfxress.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 8900096 bytes
Driver: C:\Windows\system32\igfxpers.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:50, 444400 bytes
Driver: C:\Windows\system32\igfxTMM.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 345600 bytes
Driver: C:\Windows\system32\gfxSrvc.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 190976 bytes
Driver: C:\Windows\system32\GfxUIEx.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:48, 7569392 bytes
Driver: C:\Windows\system32\GfxUIEx.exe.config, 5/7/2013 17:17:14, 1806 bytes
Driver: C:\Windows\system32\DPTopologyApp.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:48, 534000 bytes
Driver: C:\Windows\system32\DPTopologyApp.exe.config, 5/7/2013 17:17:14, 935 bytes
Driver: C:\Windows\system32\CustomModeApp.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:46, 397296 bytes
Driver: C:\Windows\system32\CustomModeApp.exe.config, 5/7/2013 17:17:14, 935 bytes
Driver: C:\Windows\system32\GfxRes.dll, 1.00.0000.0000 (English), 5/7/2013 17:17:14, 2384896 bytes
Driver: C:\Windows\system32\MetroIntelGenericUIFramework.dll, 1.00.0000.0000 (English), 5/7/2013 17:17:16, 4058624 bytes
Driver: C:\Windows\system32\GfxUIHotKeyMenu.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:48, 752624 bytes
Driver: C:\Windows\system32\GfxUIHotKeyMenu.exe.config, 5/7/2013 17:17:14, 264 bytes
Driver: C:\Windows\system32\IGFXDEVLib.dll, 1.00.0000.0000 (Invariant Language), 5/7/2013 17:17:16, 12288 bytes
Driver: C:\Windows\system32\igfxext.exe, 8.15.0010.3165 (English), 6/5/2013 17:47:50, 251888 bytes
Driver: C:\Windows\system32\igfxexps.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:14, 29184 bytes
Driver: C:\Windows\SysWow64\igfxexps32.dll, 8.15.0010.3165 (English), 5/7/2013 17:17:42, 25088 bytes
Driver: C:\Windows\system32\igfxrara.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 438784 bytes
Driver: C:\Windows\system32\igfxrchs.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 430592 bytes
Driver: C:\Windows\system32\igfxrcht.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 431104 bytes
Driver: C:\Windows\system32\igfxrdan.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 440832 bytes
Driver: C:\Windows\system32\igfxrdeu.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443392 bytes
Driver: C:\Windows\system32\igfxrenu.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 288768 bytes
Driver: C:\Windows\system32\igfxresn.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 444416 bytes
Driver: C:\Windows\system32\igfxrfin.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 441856 bytes
Driver: C:\Windows\system32\igfxrfra.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443904 bytes
Driver: C:\Windows\system32\igfxrheb.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 439296 bytes
Driver: C:\Windows\system32\igfxrhrv.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442880 bytes
Driver: C:\Windows\system32\igfxrita.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443392 bytes
Driver: C:\Windows\system32\igfxrjpn.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 434688 bytes
Driver: C:\Windows\system32\igfxrkor.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 433152 bytes
Driver: C:\Windows\system32\igfxrnld.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443392 bytes
Driver: C:\Windows\system32\igfxrnor.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 441344 bytes
Driver: C:\Windows\system32\igfxrplk.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443904 bytes
Driver: C:\Windows\system32\igfxrptb.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 441344 bytes
Driver: C:\Windows\system32\igfxrptg.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442368 bytes
Driver: C:\Windows\system32\igfxrrom.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442880 bytes
Driver: C:\Windows\system32\igfxrrus.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 443904 bytes
Driver: C:\Windows\system32\igfxrsky.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442880 bytes
Driver: C:\Windows\system32\igfxrslv.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442368 bytes
Driver: C:\Windows\system32\igfxrsve.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442368 bytes
Driver: C:\Windows\system32\igfxrtha.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 440832 bytes
Driver: C:\Windows\system32\igfxrcsy.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442880 bytes
Driver: C:\Windows\system32\igfxrell.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 444416 bytes
Driver: C:\Windows\system32\igfxrhun.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 442880 bytes
Driver: C:\Windows\system32\igfxrtrk.lrc, 8.15.0010.3165 (English), 5/7/2013 17:17:16, 441344 bytes
Driver: C:\Windows\system32\Gfxres.ar-SA.resources, 5/7/2013 17:17:14, 193244 bytes
Driver: C:\Windows\system32\Gfxres.cs-CZ.resources, 5/7/2013 17:17:14, 165749 bytes
Driver: C:\Windows\system32\Gfxres.da-DK.resources, 5/7/2013 17:17:14, 159763 bytes
Driver: C:\Windows\system32\Gfxres.de-DE.resources, 5/7/2013 17:17:14, 171245 bytes
Driver: C:\Windows\system32\Gfxres.el-GR.resources, 5/7/2013 17:17:14, 243838 bytes
Driver: C:\Windows\system32\Gfxres.es-ES.resources, 5/7/2013 17:17:14, 171646 bytes
Driver: C:\Windows\system32\Gfxres.en-US.resources, 5/7/2013 17:17:14, 155178 bytes
Driver: C:\Windows\system32\Gfxres.fi-FI.resources, 5/7/2013 17:17:14, 166682 bytes
Driver: C:\Windows\system32\Gfxres.fr-FR.resources, 5/7/2013 17:17:14, 171296 bytes
Driver: C:\Windows\system32\Gfxres.he-IL.resources, 5/7/2013 17:17:14, 185171 bytes
Driver: C:\Windows\system32\Gfxres.hr-HR.resources, 5/7/2013 17:17:14, 164782 bytes
Driver: C:\Windows\system32\Gfxres.hu-HU.resources, 5/7/2013 17:17:14, 168931 bytes
Driver: C:\Windows\system32\Gfxres.it-IT.resources, 5/7/2013 17:17:14, 173987 bytes
Driver: C:\Windows\system32\Gfxres.ja-JP.resources, 5/7/2013 17:17:14, 190556 bytes
Driver: C:\Windows\system32\Gfxres.ko-KR.resources, 5/7/2013 17:17:14, 173676 bytes
Driver: C:\Windows\system32\Gfxres.nb-NO.resources, 5/7/2013 17:17:14, 160394 bytes
Driver: C:\Windows\system32\Gfxres.nl-NL.resources, 5/7/2013 17:17:14, 168182 bytes
Driver: C:\Windows\system32\Gfxres.pl-PL.resources, 5/7/2013 17:17:14, 168556 bytes
Driver: C:\Windows\system32\Gfxres.pt-BR.resources, 5/7/2013 17:17:14, 167577 bytes
Driver: C:\Windows\system32\Gfxres.pt-PT.resources, 5/7/2013 17:17:14, 166200 bytes
Driver: C:\Windows\system32\Gfxres.ro-RO.resources, 5/7/2013 17:17:14, 169771 bytes
Driver: C:\Windows\system32\Gfxres.ru-RU.resources, 5/7/2013 17:17:14, 226564 bytes
Driver: C:\Windows\system32\Gfxres.sk-SK.resources, 5/7/2013 17:17:16, 166495 bytes
Driver: C:\Windows\system32\Gfxres.sl-SI.resources, 5/7/2013 17:17:16, 161423 bytes
Driver: C:\Windows\system32\Gfxres.sv-SE.resources, 5/7/2013 17:17:16, 166190 bytes
Driver: C:\Windows\system32\Gfxres.th-TH.resources, 5/7/2013 17:17:16, 257719 bytes
Driver: C:\Windows\system32\Gfxres.tr-TR.resources, 5/7/2013 17:17:16, 169117 bytes
Driver: C:\Windows\system32\Gfxres.zh-CN.resources, 5/7/2013 17:17:16, 146731 bytes
Driver: C:\Windows\system32\Gfxres.zh-TW.resources, 5/7/2013 17:17:16, 148451 bytes
Driver: C:\Windows\system32\ig7icd64.dll, 9.18.0010.3165 (English), 5/7/2013 17:22:48, 7021568 bytes
Driver: C:\Windows\SysWow64\ig7icd32.dll, 9.18.0010.3165 (English), 5/7/2013 17:20:34, 5452288 bytes
Driver: C:\Windows\system32\igdumdim64.dll, 9.18.0010.3165 (English), 5/7/2013 17:22:46, 8632320 bytes
Driver: C:\Windows\system32\igdail64.dll, 5/7/2013 17:22:40, 117760 bytes
Driver: C:\Windows\system32\Intel_OpenCL_ICD64.dll, 1.02.0011.0000 (English), 4/30/2013 10:43:46, 64000 bytes
Driver: C:\Windows\system32\IntelOpenCL64.dll, 1.01.0000.1005 (English), 5/7/2013 17:22:00, 258560 bytes
Driver: C:\Windows\system32\igdbcl64.dll, 6.14.0010.9139 (English), 5/7/2013 17:22:06, 322560 bytes
Driver: C:\Windows\system32\igdrcl64.dll, 9.18.0010.3165 (English), 5/7/2013 17:22:18, 1690112 bytes
Driver: C:\Windows\system32\igdfcl64.dll, 5/7/2013 17:21:06, 24283136 bytes
Driver: C:\Windows\SysWow64\Intel_OpenCL_ICD32.dll, 1.02.0011.0000 (English), 4/30/2013 10:43:46, 60416 bytes
Driver: C:\Windows\SysWow64\IntelOpenCL32.dll, 1.01.0000.1005 (English), 5/7/2013 17:21:26, 203264 bytes
Driver: C:\Windows\SysWow64\igdbcl32.dll, 6.14.0010.9139 (English), 5/7/2013 17:21:30, 279040 bytes
Driver: C:\Windows\SysWow64\igdrcl32.dll, 9.18.0010.3165 (English), 5/7/2013 17:21:44, 1564672 bytes
Driver: C:\Windows\SysWow64\igdfcl32.dll, 5/7/2013 17:16:22, 19587072 bytes
Driver: C:\Program Files\Intel\Media SDK\libmfxhw32.dll, 4.13.0004.0017 (English), 5/7/2013 17:23:10, 11218328 bytes
Driver: C:\Program Files\Intel\Media SDK\mfx_mft_h264ve_32.dll, 4.13.0004.0019 (English), 5/7/2013 17:23:10, 512512 bytes
Driver: C:\Program Files\Intel\Media SDK\mfx_mft_mjpgvd_32.dll, 4.13.0004.0019 (English), 5/7/2013 17:23:10, 491520 bytes
Driver: C:\Program Files\Intel\Media SDK\he_32.vp, 5/7/2013 17:23:10, 17633 bytes
Driver: C:\Program Files\Intel\Media SDK\c_32.cpa, 5/7/2013 17:23:10, 846855 bytes
Driver: C:\Program Files\Intel\Media SDK\cpa_32.vp, 5/7/2013 17:23:10, 993 bytes
Driver: C:\Program Files\Intel\Media SDK\dev_32.vp, 5/7/2013 17:23:10, 21523 bytes
Driver: C:\Program Files\Intel\Media SDK\mj_32.vp, 5/7/2013 17:23:10, 16825 bytes
Driver: C:\Program Files\Intel\Media SDK\libmfxhw64.dll, 4.13.0004.0017 (English), 5/7/2013 17:23:10, 15248280 bytes
Driver: C:\Program Files\Intel\Media SDK\mfx_mft_h264ve_64.dll, 4.13.0004.0019 (English), 5/7/2013 17:23:10, 611840 bytes
Driver: C:\Program Files\Intel\Media SDK\mfx_mft_mjpgvd_64.dll, 4.13.0004.0019 (English), 5/7/2013 17:23:10, 586752 bytes
Driver: C:\Program Files\Intel\Media SDK\he_64.vp, 5/7/2013 17:23:10, 4485 bytes
Driver: C:\Program Files\Intel\Media SDK\c_64.cpa, 5/7/2013 17:23:10, 1519616 bytes
Driver: C:\Program Files\Intel\Media SDK\cpa_64.vp, 5/7/2013 17:23:10, 993 bytes
Driver: C:\Program Files\Intel\Media SDK\dev_64.vp, 5/7/2013 17:23:10, 21523 bytes
Driver: C:\Program Files\Intel\Media SDK\mj_64.vp, 5/7/2013 17:23:10, 4377 bytes
Driver: C:\Windows\system32\igfxCoIn_v3165.dll, 1.02.0030.0000 (English), 5/7/2013 17:25:22, 89600 bytes
Name: Intel(R) Management Engine Interface
Device ID: PCI\VEN_8086&DEV_1E3A&SUBSYS_10D21462&REV_04\3&11583659&0&B0
Driver: C:\Windows\system32\DRIVERS\HECIx64.sys, 8.01.0000.1263 (English), 10/5/2012 01:35:54, 62784 bytes
Name: Intel(R) 7 Series Chipset Family SATA AHCI Controller
Device ID: PCI\VEN_8086&DEV_1E03&SUBSYS_10D21462&REV_04\3&11583659&0&FA
Driver: C:\Windows\system32\DRIVERS\iaStorA.sys, 11.06.0000.1030 (English), 9/1/2012 18:01:56, 647736 bytes
Name: Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)
Device ID: PCI\VEN_8086&DEV_1E31&SUBSYS_10D21462&REV_04\3&11583659&0&A0
Driver: C:\Windows\system32\DRIVERS\UCX01000.SYS, 6.02.9200.16628 (English), 6/1/2013 04:29:35, 213248 bytes
Driver: C:\Windows\system32\DRIVERS\USBXHCI.SYS, 6.02.9200.16628 (English), 6/1/2013 04:29:35, 337152 bytes
Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_1E20&SUBSYS_10D21462&REV_04\3&11583659&0&D8
Driver: C:\Windows\system32\DRIVERS\hdaudbus.sys, 6.02.9200.16420 (English), 9/19/2012 23:08:44, 71168 bytes
Name: Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
Device ID: PCI\VEN_1969&DEV_E091&SUBSYS_10D21462&REV_13\4&18576D74&0&00E0
Driver: C:\Windows\system32\DRIVERS\e22w8x64.sys, 8.00.0002.0038 (English), 9/24/2012 23:09:24, 164720 bytes
Name: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
Device ID: PCI\VEN_8086&DEV_1E26&SUBSYS_10D21462&REV_04\3&11583659&0&E8
Driver: C:\Windows\system32\drivers\usbehci.sys, 6.02.9200.16420 (English), 9/20/2012 00:55:32, 79080 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 00:55:33, 488168 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 04:19:44, 496872 bytes
Name: SDA Standard Compliant SD Host Controller
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_10D21462&REV_01\4&14713C28&0&01E4
Driver: C:\Windows\system32\DRIVERS\sdbus.sys, 6.02.9200.16628 (English), 6/1/2013 04:54:16, 194816 bytes
Driver: C:\Windows\system32\DRIVERS\dumpsd.sys, 6.02.9200.16628 (English), 6/1/2013 04:54:10, 125184 bytes
Name: Realtek PCIE CardReader
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_10D21462&REV_01\4&14713C28&0&00E4
Driver: C:\Windows\system32\DRIVERS\RtsPStor.sys, 6.02.8400.28123 (English), 10/5/2012 01:36:44, 339600 bytes
Driver: C:\Windows\SysWOW64\RtsPStorIcon.dll, 1.00.0008.0000 (English), 10/5/2012 01:36:44, 9888912 bytes
Name: Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 3 - 1E14
Device ID: PCI\VEN_8086&DEV_1E14&SUBSYS_10D21462&REV_C4\3&11583659&0&E2
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 22:00:55, 234224 bytesQuote from: ftln on 26-August-13, 21:28:29
I was hoping to unlock a few overclocking features, also would be cool if I could disable Discrete Gpu that runs behind HD4000 via Nvidia Optimus.
Would also be cool If I could unlock voltages and overclocking limits on GPU 670mx 2gb....
Quote from: ftln on 26-August-13, 21:28:29
I was hoping to unlock a few overclocking features, also would be cool if I could disable Discrete Gpu that runs behind HD4000 via Nvidia Optimus.
bios can be done unlocked, but can't tell anything about any OC options if there such or will they works.
disable intel card will cause black screen, you cant use nvidia one without intel card
Quote
Would also be cool If I could unlock voltages and overclocking limits on GPU 670mx 2gb....
can be done eventually as well -
MSI KT3 Ultra-ARU + All In Wonder Problem
I've got a odd problem that is related to putting my machine into Standby. If I do so the night before, then wake the system up in the morning I see issues that point to memory corruption or driver failure or a conflict with the VIA chipset. Outlook Express will lock up on launch, the ATI digital VCR app will either not launch or fail to shutdown if it does. I clean installed Windows XP, then updated it with XP SP1. Of note is that the video card works ok with the OS supplied driver but if you install the ATI drivers (which are needed to make the TV and Digital VCR work) this stuff happens. I have reinstalled several times so I am pretty sure this isn't just a messy config issue. I've had bad experiences similar to this with VIA chipset mobos in the past so this doesn't surprise me.
Anyone ever see this? Know of a fix?
-- Richard
Mobo: KT3 Ultra-ARU MS-6380E
CPU: Athlon XP 1800+
Video: All In Wonder Radeon
RAM: 512MB Samsung PC2100
HD: Seagate 80GB Barracuda IV
OS: Microsoft Windows XP Professional
Version: 5.1.2600 Service Pack 1 Build 2600
BIOS Version/Date: American Megatrends Inc. 07.00T, 4/2/2001
SMBIOS Version: 2.3I don't know if this will help or not but....
I had issues with the latest drivers from ATI. I downloaded the tv capture drivers, display drivers, etc. in the 7.7 bundle. I went back to the 7.6 bundle and have had zero problems since. -
[Solved] HP Omen 15 - Slow SSD after IRQ 16 error
[EDIT]
Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
So if anyone else runs into this problem here's the solution:
1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
4) Enable bumblebeed.service
3) remove the nomodeset option
Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
[/EDIT]
Hi everyone,
I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
Hardware:
i7-4710HQ
Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
512GB Samsung XP941 SSD (M.2)
Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
The actual error that (I think) leads to the performance hit is
[ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
[ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
[ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
[ 13.608643] Call Trace:
[ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
[ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
[ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
[ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
[ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
[ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
[ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
[ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
[ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
[ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
[ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
[ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
[ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
[ 13.608756] handlers:
[ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
[ 13.608873] Disabling IRQ #16
What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
With nomodeset:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
...and without:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
So just about 0.3% of the original speed.
The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 62260/255/63, sectors = 1000215216, start = 0
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
CAL: 898 819 847 830 822 853 843 869 Function call interrupts
TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 2 2 2 2 Machine check polls
HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
[ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
[ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
[ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
[ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
[ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
[ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
[ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
[ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
[ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
[ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
[ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
[ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
[ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
[ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
[ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
[ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
[ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
[ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
[ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
[ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
[ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
[ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
[ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
[ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
[ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
[ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
[ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
[ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF67000 000040
[ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
[ 0.000000] On node 0 totalpages: 4175366
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9922 pages used for memmap
[ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
[ 0.000000] Normal zone: 55256 pages used for memmap
[ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.211 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000028] ACPI: Core revision 20140926
[ 0.014940] ACPI: All ACPI Tables successfully acquired
[ 0.048477] Security Framework initialized
[ 0.048484] Yama: becoming mindful.
[ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052448] Initializing cgroup subsys memory
[ 0.052452] Initializing cgroup subsys devices
[ 0.052454] Initializing cgroup subsys freezer
[ 0.052455] Initializing cgroup subsys net_cls
[ 0.052457] Initializing cgroup subsys blkio
[ 0.052472] CPU: Physical Processor ID: 0
[ 0.052473] CPU: Processor Core ID: 0
[ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053226] mce: CPU supports 9 MCE banks
[ 0.053236] CPU0: Thermal monitoring enabled (TM1)
[ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.055124] ftrace: allocating 20931 entries in 82 pages
[ 0.061596] dmar: Host address width 39
[ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
[ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061671] HPET id 0 under DRHD base 0xfed91000
[ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.061783] Enabled IRQ remapping in x2apic mode
[ 0.061784] Enabling x2apic
[ 0.061784] Enabled x2apic
[ 0.061789] Switched APIC routing to cluster x2apic.
[ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.095250] TSC deadline timer enabled
[ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.095280] ... version: 3
[ 0.095281] ... bit width: 48
[ 0.095281] ... generic registers: 4
[ 0.095282] ... value mask: 0000ffffffffffff
[ 0.095283] ... max period: 0000ffffffffffff
[ 0.095283] ... fixed-purpose events: 3
[ 0.095284] ... event mask: 000000070000000f
[ 0.118723] x86: Booting SMP configuration:
[ 0.118724] .... node #0, CPUs: #1
[ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.139403] #2 #3 #4 #5 #6 #7
[ 0.253216] x86: Booted up 1 node, 8 CPUs
[ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
[ 0.259240] devtmpfs: initialized
[ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.261788] pinctrl core: initialized pinctrl subsystem
[ 0.261821] RTC time: 15:05:14, date: 03/07/15
[ 0.261896] NET: Registered protocol family 16
[ 0.272461] cpuidle: using governor ladder
[ 0.285819] cpuidle: using governor menu
[ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.285861] ACPI: bus type PCI registered
[ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286198] PCI: Using configuration type 1 for base access
[ 0.299479] ACPI: Added _OSI(Module Device)
[ 0.299481] ACPI: Added _OSI(Processor Device)
[ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.306241] ACPI: Dynamic OEM Table Load:
[ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.319415] ACPI: Dynamic OEM Table Load:
[ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.332651] ACPI: Dynamic OEM Table Load:
[ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.384073] ACPI: Interpreter enabled
[ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.384107] ACPI: (supports S0 S3 S4 S5)
[ 0.384108] ACPI: Using IOAPIC for interrupt routing
[ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388473] ACPI: Power Resource [PG00] (on)
[ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.391231] PCI host bridge to bus 0000:00
[ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
[ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
[ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
[ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
[ 0.406285] pci 0000:08:00.0: supports D1 D2
[ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
[ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
[ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.420764] vgaarb: loaded
[ 0.420765] vgaarb: bridge control possible 0000:00:02.0
[ 0.420853] PCI: Using ACPI for IRQ routing
[ 0.425911] PCI: pci_cache_line_size set to 64 bytes
[ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
[ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
[ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
[ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.426019] NetLabel: Initializing
[ 0.426020] NetLabel: domain hash size = 128
[ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.426028] NetLabel: unlabeled traffic allowed by default
[ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.428075] Switched to clocksource hpet
[ 0.431534] pnp: PnP ACPI init
[ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.431622] system 00:00: [io 0xffff] has been reserved
[ 0.431623] system 00:00: [io 0xffff] has been reserved
[ 0.431624] system 00:00: [io 0xffff] has been reserved
[ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432212] pnp: PnP ACPI: found 7 devices
[ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
[ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.438182] NET: Registered protocol family 2
[ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438585] TCP: reno registered
[ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438690] NET: Registered protocol family 1
[ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.440063] PCI: CLS 64 bytes, default 64
[ 0.440092] Unpacking initramfs...
[ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
[ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
[ 0.535525] Simple Boot Flag at 0x44 set to 0x1
[ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.535836] Scanning for low memory corruption every 60 seconds
[ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.536041] Initialise system trusted keyring
[ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.537029] zpool: loaded
[ 0.537031] zbud: loaded
[ 0.537161] VFS: Disk quotas dquot_6.5.2
[ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.537256] msgmni has been set to 31953
[ 0.537287] Key type big_key registered
[ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.537471] io scheduler noop registered
[ 0.537473] io scheduler deadline registered
[ 0.537490] io scheduler cfq registered (default)
[ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538055] efifb: probing for efifb
[ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
[ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.538071] efifb: scrolling: redraw
[ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541482] Console: switching to colour frame buffer device 240x67
[ 0.544794] fb0: EFI VGA frame buffer device
[ 0.544800] intel_idle: MWAIT substates: 0x42120
[ 0.544801] intel_idle: v0.4 model 0x3C
[ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.545023] GHES: HEST is not enabled!
[ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.545351] Linux agpgart interface v0.103
[ 0.545389] rtc_cmos 00:02: RTC can wake from S4
[ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.545524] Intel P-state driver initializing.
[ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.545994] TCP: cubic registered
[ 0.546216] NET: Registered protocol family 10
[ 0.546732] NET: Registered protocol family 17
[ 0.547560] Loading compiled-in X.509 certificates
[ 0.547591] registered taskstats version 1
[ 0.548780] Magic number: 7:609:82
[ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
[ 0.549136] PM: Hibernation image not present or could not be loaded.
[ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.551126] Write protecting the kernel read-only data: 8192k
[ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.584356] device-mapper: uevent: version 1.0.3
[ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
[ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
[ 0.604239] ACPI: bus type USB registered
[ 0.604267] usbcore: registered new interface driver usbfs
[ 0.604273] SCSI subsystem initialized
[ 0.604279] usbcore: registered new interface driver hub
[ 0.604330] usbcore: registered new device driver usb
[ 0.605601] libata version 3.00 loaded.
[ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.606024] hub 1-0:1.0: USB hub found
[ 0.606063] hub 1-0:1.0: 14 ports detected
[ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.609780] hub 2-0:1.0: USB hub found
[ 0.609795] hub 2-0:1.0: 6 ports detected
[ 0.610944] ahci 0000:00:1f.2: version 3.0
[ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.611516] scsi host0: ahci
[ 0.611639] scsi host1: ahci
[ 0.611727] scsi host2: ahci
[ 0.611822] scsi host3: ahci
[ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
[ 0.611863] ata2: DUMMY
[ 0.611864] ata3: DUMMY
[ 0.611865] ata4: DUMMY
[ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
[ 0.625238] scsi host4: ahci
[ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
[ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808673] usb usb2-port2: couldn't allocate usb_device
[ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808798] usb usb2-port6: couldn't allocate usb_device
[ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
[ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952660] ata5.00: configured for UDMA/133
[ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
[ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
[ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
[ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
[ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
[ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.972914] systemd[1]: Detected architecture 'x86-64'.
[ 1.973342] systemd[1]: Set hostname to <hp_arch>.
[ 2.046Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.
-
Product support for Portege M800
Hi all,
Recently my girlfriend gave me her TOSHIBA M800 laptop. Enlighten me pls as to why I cannot find the model M800 in Toshiba's product support tab?
The models I see there are all 805-XXXXXX.
Is 800 supposed to mean 800 series and that in fact the laptop I am having now is one of those 805-XXXXXX?
I tried to see if any of those M805-XXXXXXX match the model number I see on my laptop but none of it matches. Mine is PPM81L.
I am just trying to find out if my laptop comes with bluetooth.
Appreciate your help on this.Thanks all!
I found it on the asian page.
I tried to find the manual but cannot locate it. Any kind-hearted soul can teach me how to on the bluetooth?
I read the specifications of my M800 and it states that my laptop does have bluetooth but I have no idea how to turn it on. I turned on the WIFI but I believe it is not the same, because my mobile cannot detect my lappy via bluetooth.
What I am trying to do now is to use my mobile phone as a modem and connect it to my lappy via bluetooth in order for me to surf the internet.
I am currently using windows 7 ultimate.
Any kind hearted soul knows how to do it and is willing to teach me?
Appreciate any kind of help because I am a computer idiot. Thanks.
Portege m800 Specification :
* Processor: Intel core 2 Duo t5750 (2 GHz)
* Chipset: Intel 965GM express
* Memory: 1024 MB., DDR 2-667
* Screen: 13,3 inch, WXGA (1280x800 points) with truBrite technology
* Video : Intel GMA x3100 (358 MB.)
* HDD: 250 GB SATA
* DVD superMulti
* Interfaces: 3 X USB 2.0, 1 X fireWire (IEEE 1394), 1 X VGA, head sets and microphone, card reader, expressCard slot
* Network: 802.11agn wi-Fi, modem 56K, Ethernet LAN 10/100/1000, *Bluetooth + EDR*
* Built-in 1,3-Mp camera
* Overall sizes: 314 x 229 x 35 mm
* Weight: 1,97 kg
* Operating system : Windows vista home premium
Message was edited by: nitekid11 -
MTRR allocation problem on Dell Vostro
Hello good people,
I am having MTRR messages from kernel and a warning that graphics performance may suffer. I know from the sparse mtrr documentation around that I can set them up as I want and everything should work but after trying several changes, the only thing I have managed to do it get a horribly slow laptop.
I am running 64bit Arch on Dell Vostro 3550. I have 6GB ram and a hybrid video card setup with an Intel card and an ATI one. I am using the proprietary Catalyst driver and I also have the intel driver installed.
Here we go...
Kernel message.
$dmesg | grep -i mtrr
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] MTRR variable ranges enabled:
[ 17.262434] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 17.262437] [drm] MTRR allocation failed. Graphics performance may suffer.
I noticed in /proc/config.gz that I don't have MTRR cleanup enabled by default so I tried adding enable_mtrr_cleanup to the boot line but I still don't get a good mtrr.
$zgrep MTRR /proc/config.gz
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
Now here is the mtrr I would like to repair. Notice that the memory range in reg 0 is 8192MB. Why? Reg 3 should be the range for the intel card since that's the address I get from lspci -vv as you will see. Similary, reg 4 is mapping for the ATI radeon card. According to what I have read, I want to have these as write-combining. The other ranges I have no idea why they are there which complicates my attempts at fixing the mtrr.
$cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
reg01: base=0x0cb800000 ( 3256MB), size= 8MB, count=1: uncachable
reg02: base=0x0cc000000 ( 3264MB), size= 64MB, count=1: uncachable
reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable
reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
reg05: base=0x1afe00000 ( 6910MB), size= 2MB, count=1: uncachable
reg06: base=0x1b0000000 ( 6912MB), size= 256MB, count=1: uncachable
reg07: base=0x1c0000000 ( 7168MB), size= 1024MB, count=1: uncachable
Here is the lspci output.
$lspci -vv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f7c0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: f6800000-f78fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 49
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7b20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7b00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f7910000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Finally, here is the Xorg log.
$cat /var/log/Xorg.0.log
[ 22.722]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 22.744] X Protocol Version 11, Revision 0
[ 22.744] Build Operating System: Linux 3.2.2-1-ARCH x86_64
[ 22.744] Current Operating System: Linux bitlab 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[ 22.744] Kernel command line: root=/dev/mapper/arch--volume-lvroot ro
[ 22.744] Build Date: 29 January 2012 03:38:00PM
[ 22.744]
[ 22.744] Current version of pixman: 0.24.4
[ 22.744] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.744] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 19 10:29:00 2012
[ 22.807] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.828] (==) ServerLayout "aticonfig Layout"
[ 22.828] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 22.828] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 22.829] (**) | |-->Device "aticonfig-Device[0]-0"
[ 22.829] (==) Automatically adding devices
[ 22.829] (==) Automatically enabling devices
[ 22.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.881] Entry deleted from font path.
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.882] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.882] (II) Loader magic: 0x7ccae0
[ 22.882] (II) Module ABI versions:
[ 22.882] X.Org ANSI C Emulation: 0.4
[ 22.882] X.Org Video Driver: 11.0
[ 22.882] X.Org XInput driver : 13.0
[ 22.882] X.Org Server Extension : 6.0
[ 22.883] (--) PCI:*(0:0:2:0) 8086:0126:1028:04cd rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 22.883] (--) PCI: (0:1:0:0) 1002:6741:1028:04cd rev 0, Mem @ 0xe0000000/268435456, 0xf7b20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 22.883] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.883] (II) "extmod" will be loaded by default.
[ 22.883] (II) "dbe" will be loaded by default.
[ 22.883] (II) "glx" will be loaded by default.
[ 22.883] (II) "record" will be loaded by default.
[ 22.883] (II) "dri" will be loaded by default.
[ 22.883] (II) "dri2" will be loaded by default.
[ 22.883] (II) LoadModule: "extmod"
[ 22.934] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.935] (II) Module extmod: vendor="X.Org Foundation"
[ 22.935] compiled for 1.11.4, module version = 1.0.0
[ 22.935] Module class: X.Org Server Extension
[ 22.935] ABI class: X.Org Server Extension, version 6.0
[ 22.935] (II) Loading extension MIT-SCREEN-SAVER
[ 22.935] (II) Loading extension XFree86-VidModeExtension
[ 22.935] (II) Loading extension XFree86-DGA
[ 22.935] (II) Loading extension DPMS
[ 22.935] (II) Loading extension XVideo
[ 22.935] (II) Loading extension XVideo-MotionCompensation
[ 22.935] (II) Loading extension X-Resource
[ 22.935] (II) LoadModule: "dbe"
[ 22.935] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.936] (II) Module dbe: vendor="X.Org Foundation"
[ 22.936] compiled for 1.11.4, module version = 1.0.0
[ 22.936] Module class: X.Org Server Extension
[ 22.936] ABI class: X.Org Server Extension, version 6.0
[ 22.936] (II) Loading extension DOUBLE-BUFFER
[ 22.936] (II) LoadModule: "glx"
[ 22.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.951] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 22.951] compiled for 6.9.0, module version = 1.0.0
[ 22.952] (II) Loading extension GLX
[ 22.952] (II) LoadModule: "record"
[ 22.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.957] (II) Module record: vendor="X.Org Foundation"
[ 22.957] compiled for 1.11.4, module version = 1.13.0
[ 22.957] Module class: X.Org Server Extension
[ 22.957] ABI class: X.Org Server Extension, version 6.0
[ 22.957] (II) Loading extension RECORD
[ 22.957] (II) LoadModule: "dri"
[ 22.958] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.965] (II) Module dri: vendor="X.Org Foundation"
[ 22.965] compiled for 1.11.4, module version = 1.0.0
[ 22.965] ABI class: X.Org Server Extension, version 6.0
[ 22.965] (II) Loading extension XFree86-DRI
[ 22.965] (II) LoadModule: "dri2"
[ 22.965] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.966] (II) Module dri2: vendor="X.Org Foundation"
[ 22.966] compiled for 1.11.4, module version = 1.2.0
[ 22.966] ABI class: X.Org Server Extension, version 6.0
[ 22.966] (II) Loading extension DRI2
[ 22.966] (II) LoadModule: "fglrx"
[ 22.966] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.148] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 23.154] compiled for 1.4.99.906, module version = 8.96.4
[ 23.154] Module class: X.Org Video Driver
[ 23.156] (II) Loading sub module "fglrxdrm"
[ 23.156] (II) LoadModule: "fglrxdrm"
[ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.183] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.183] compiled for 1.4.99.906, module version = 8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Release Identifier: 8.961
[ 23.192] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2012 23:06:21
[ 23.192] (++) using VT number 7
[ 23.195] (WW) Falling back to old probe method for fglrx
[ 23.260] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.263] (--) Chipset Supported AMD Graphics Processor (0x6741) found
[ 23.264] (II) fglrx: intel VGA device detected, load intel driver.
[ 23.264] (II) LoadModule: "intel"
[ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.296] (II) Module intel: vendor="X.Org Foundation"
[ 23.296] compiled for 1.11.2, module version = 2.17.0
[ 23.296] Module class: X.Org Video Driver
[ 23.296] ABI class: X.Org Video Driver, version 11.0
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 23.298] ukiOpenDevice: node name is /dev/ati/card0
[ 23.298] ukiOpenDevice: open result is 7, (OK)
[ 23.298] ukiOpenByBusid: ukiOpenMinor returns 7
[ 23.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 23.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.301] (II) AMD Video driver is signed
[ 23.301] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.301] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.301] (II) fglrx(0): pEnt->device->identifier=0x100a450
[ 23.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.302] (II) intel(1): pEnt->device->identifier=(nil)
[ 23.302] (EE) Screen 1 deleted because of no matching config section.
[ 23.302] (II) UnloadModule: "intel"
[ 23.302] (II) Unloading intel
[ 23.302] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 23.302] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 23.798] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: drmOpenMinor returns 12
[ 23.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.801] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.801] (==) fglrx(0): RGB weight 888
[ 23.801] (==) fglrx(0): Default visual is TrueColor
[ 23.802] (**) fglrx(0): Option "Tiling" "off"
[ 23.802] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 23.802] (**) fglrx(0): Option "Shadow" "off"
[ 23.802] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.802] (**) fglrx(0): ChipID override: 0x0126
[ 23.802] (**) fglrx(0): ChipRev override: 9
[ 23.802] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 23.802] (**) fglrx(0): Relaxed fencing enabled
[ 23.802] (**) fglrx(0): Wait on SwapBuffers? enabled
[ 23.802] (**) fglrx(0): Triple buffering? enabled
[ 23.802] (**) fglrx(0): Framebuffer linear
[ 23.802] (**) fglrx(0): Pixmaps linear
[ 23.802] (**) fglrx(0): 3D buffers tiled
[ 23.802] (**) fglrx(0): SwapBuffers wait enabled
[ 23.802] (==) fglrx(0): video overlay key set to 0x101fe
[ 23.802] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[ 23.802] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 23.802] (II) fglrx(0): Output VGA1 has no monitor section
[ 23.825] (II) fglrx(0): Output HDMI1 has no monitor section
[ 23.863] (II) fglrx(0): Output DP1 has no monitor section
[ 23.863] (II) fglrx(0): EDID for output LVDS1
[ 23.863] (II) fglrx(0): Manufacturer: LGD Model: 2e3 Serial#: 0
[ 23.863] (II) fglrx(0): Year: 2010 Week: 0
[ 23.863] (II) fglrx(0): EDID Version: 1.4
[ 23.863] (II) fglrx(0): Digital Display Input
[ 23.863] (II) fglrx(0): 6 bits per channel
[ 23.863] (II) fglrx(0): Digital interface is undefined
[ 23.863] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 23.863] (II) fglrx(0): Gamma: 2.20
[ 23.863] (II) fglrx(0): No DPMS capabilities specified
[ 23.863] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.863] (II) fglrx(0): First detailed timing is preferred mode
[ 23.863] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 23.863] (II) fglrx(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
[ 23.863] (II) fglrx(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
[ 23.863] (II) fglrx(0): Manufacturer's mask: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 76.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 810 v_border: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 51.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 814 v_border: 0
[ 23.863] (II) fglrx(0): PPCTF156WH4
[ 23.863] (II) fglrx(0): Unknown vendor-specific block 0
[ 23.863] (II) fglrx(0): EDID (in hex):
[ 23.863] (II) fglrx(0): 00ffffffffffff0030e4e30200000000
[ 23.863] (II) fglrx(0): 00140104902213780a09159d5f599b27
[ 23.863] (II) fglrx(0): 19505400000001010101010101010101
[ 23.863] (II) fglrx(0): 010101010101b01d56c650002a302430
[ 23.863] (II) fglrx(0): 350058c210000019ec1356c650002e30
[ 23.863] (II) fglrx(0): 2430350058c210000019000000fe0050
[ 23.863] (II) fglrx(0): 50435446803135365748340a00000000
[ 23.863] (II) fglrx(0): 00004131960000000001010a202000ef
[ 23.863] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 23.863] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Printing probed modes for output LVDS1
[ 23.863] (II) fglrx(0): Modeline "1366x768"x60.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x40.1 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.863] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.863] (II) fglrx(0): EDID for output VGA1
[ 23.887] (II) fglrx(0): EDID for output HDMI1
[ 23.926] (II) fglrx(0): EDID for output DP1
[ 23.973] (II) fglrx(0): Output LVDS1 connected
[ 23.973] (II) fglrx(0): Output VGA1 disconnected
[ 23.973] (II) fglrx(0): Output HDMI1 disconnected
[ 23.973] (II) fglrx(0): Output DP1 disconnected
[ 23.973] (II) fglrx(0): Using exact sizes for initial modes
[ 23.973] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
[ 23.973] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.973] (II) fglrx(0): Kernel page flipping support detected, enabling
[ 23.973] (**) fglrx(0): Display dimensions: (340, 190) mm
[ 23.973] (**) fglrx(0): DPI set to (102, 102)
[ 23.973] (II) Loading sub module "fb"
[ 23.973] (II) LoadModule: "fb"
[ 23.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.133] (II) Module fb: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.0.0
[ 24.133] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.133] (II) Loading sub module "dri2"
[ 24.133] (II) LoadModule: "dri2"
[ 24.133] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.133] (II) Module dri2: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.2.0
[ 24.133] ABI class: X.Org Server Extension, version 6.0
[ 24.133] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.133] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.133] (==) fglrx(0): Default visual is TrueColor
[ 24.133] (**) fglrx(0): Option "DPMS" "true"
[ 24.133] (==) fglrx(0): RGB weight 888
[ 24.133] (II) fglrx(0): Using 8 bits per RGB
[ 24.133] (==) fglrx(0): Buffer Tiling is ON
[ 24.133] (II) Loading sub module "fglrxdrm"
[ 24.133] (II) LoadModule: "fglrxdrm"
[ 24.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.133] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.133] compiled for 1.4.99.906, module version = 8.96.4
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.134] ukiOpenDevice: node name is /dev/ati/card0
[ 24.134] ukiOpenDevice: open result is 13, (OK)
[ 24.134] ukiOpenByBusid: ukiOpenMinor returns 13
[ 24.134] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.135] (**) fglrx(0): NoAccel = NO
[ 24.135] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.135] (--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
[ 24.135] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x04cd)
[ 24.135] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.135] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 24.135] (--) fglrx(0): MMIO registers at 0xf7b20000
[ 24.135] (--) fglrx(0): I/O port at 0x0000e000
[ 24.135] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.157] (II) fglrx(0): AC Adapter is used
[ 24.236] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 24.236] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 24.236] (II) fglrx(0): PCIE card detected
[ 24.236] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 24.236] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 24.241] (II) fglrx(0): Using adapter: 1:0.0.
[ 24.248] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 24.274] (II) fglrx(0): Interrupt handler installed at IRQ 55.
[ 24.274] (II) fglrx(0): RandR 1.2 support is enabled!
[ 24.274] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 24.274] (==) fglrx(0): Center Mode is disabled
[ 24.274] (II) Loading sub module "fb"
[ 24.274] (II) LoadModule: "fb"
[ 24.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.274] (II) Module fb: vendor="X.Org Foundation"
[ 24.274] compiled for 1.11.4, module version = 1.0.0
[ 24.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.274] (II) Loading sub module "ddc"
[ 24.274] (II) LoadModule: "ddc"
[ 24.274] (II) Module "ddc" already built-in
[ 24.388] (II) fglrx(0): Finished Initialize PPLIB!
[ 24.396] (II) fglrx(0): Eyefinity capable adapter detected.
[ 24.397] (II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 6 configurable heads and 0 displays connected.
[ 24.397] (==) fglrx(0): PseudoColor visuals disabled
[ 24.397] (II) Loading sub module "ramdac"
[ 24.397] (II) LoadModule: "ramdac"
[ 24.397] (II) Module "ramdac" already built-in
[ 24.397] (==) fglrx(0): NoDRI = NO
[ 24.397] (==) fglrx(0): Capabilities: 0x00000000
[ 24.397] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 24.397] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 24.397] (==) fglrx(0): UseFastTLS=0
[ 24.397] (--) Depth 24 pixmap format is 32 bpp
[ 24.397] (II) LoadModule: "glesx"
[ 24.458] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 24.594] (II) Module glesx: vendor="X.Org Foundation"
[ 24.594] compiled for 1.4.99.906, module version = 1.0.0
[ 24.594] (II) Loading extension GLESX
[ 24.606] (II) fglrx(0): [DRI2] Setup complete
[ 24.606] (II) fglrx(0): [DRI2] DRI driver: i965
[ 24.606] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
[ 24.610] (II) UXA(0): Driver registered support for the following operations:
[ 24.610] (II) solid
[ 24.610] (II) copy
[ 24.610] (II) composite (RENDER acceleration)
[ 24.610] (II) put_image
[ 24.610] (II) get_image
[ 24.610] (==) fglrx(0): Backing store disabled
[ 24.610] (==) fglrx(0): Silken mouse enabled
[ 24.610] (II) fglrx(0): Initializing HW Cursor
[ 24.666] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.667] (**) fglrx(0): DPMS enabled
[ 24.667] (==) fglrx(0): Intel XvMC decoder enabled
[ 24.667] (II) fglrx(0): Set up textured video
[ 24.667] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[ 24.667] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 24.667] (WW) fglrx(0): Option "VendorName" is not used
[ 24.667] (WW) fglrx(0): Option "ModelName" is not used
[ 24.667] (WW) fglrx(0): Option "Shadow" is not used
[ 24.667] (WW) fglrx(0): Option "Tiling" is not used
[ 24.667] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.667] (==) fglrx(0): hotplug detection: "enabled"
[ 24.668] (II) Loading extension ATIFGLRXDRI
[ 24.668] (II) fglrx(0): doing swlDriScreenInit
[ 24.668] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.668] ukiOpenDevice: node name is /dev/ati/card0
[ 24.668] ukiOpenDevice: open result is 15, (OK)
[ 24.668] ukiOpenByBusid: ukiOpenMinor returns 15
[ 24.668] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.668] (II) fglrx(0): [uki] DRM interface version 1.0
[ 24.668] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 24.668] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 24.668] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9e27b95000
[ 24.668] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 24.668] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 24.668] (II) fglrx(0): swlDriScreenInit done
[ 24.668] (II) fglrx(0): Kernel Module Version Information:
[ 24.668] (II) fglrx(0): Name: fglrx
[ 24.668] (II) fglrx(0): Version: 8.96.4
[ 24.668] (II) fglrx(0): Date: Apr 5 2012
[ 24.668] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 24.668] (II) fglrx(0): Kernel Module version matches driver.
[ 24.668] (II) fglrx(0): Kernel Module Build Time Information:
[ 24.668] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.3.6-1-ARCH
[ 24.668] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 24.668] (II) fglrx(0): Build-Kernel __SMP__: no
[ 24.668] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 24.668] (II) fglrx(0): [uki] register handle = 0x00004000
[ 24.699] (II) fglrx(0): DRI initialization successfull
[ 24.699] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
[ 24.699] (II) fglrx(0): Intel display surface mc addr for AMD: 8fce0000
[ 24.700] (==) fglrx(0): Backing store disabled
[ 24.700] (II) Loading extension FGLRXEXTENSION
[ 24.700] (**) fglrx(0): DPMS enabled
[ 24.700] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 24.700] (**) fglrx(0): Textured Video is enabled.
[ 24.700] (II) fglrx(0): GLESX enableFlags = 848
[ 24.700] (II) fglrx(0): GLESX is enabled
[ 24.700] (II) LoadModule: "amdxmm"
[ 24.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 24.709] (II) Module amdxmm: vendor="X.Org Foundation"
[ 24.709] compiled for 1.4.99.906, module version = 2.0.0
[ 24.709] (II) Loading extension AMDXVOPL
[ 24.709] (II) Loading extension AMDXVBA
[ 24.709] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 24.721] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 24.723] (II) fglrx(0): Enable composite support successfully
[ 24.723] (WW) fglrx(0): Option "VendorName" is not used
[ 24.723] (WW) fglrx(0): Option "ModelName" is not used
[ 24.723] (WW) fglrx(0): Option "Shadow" is not used
[ 24.723] (WW) fglrx(0): Option "Tiling" is not used
[ 24.723] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.723] (II) fglrx(0): X context handle = 0x1
[ 24.723] (II) fglrx(0): [DRI] installation complete
[ 24.736] (--) RandR disabled
[ 24.736] (II) Initializing built-in extension Generic Event Extension
[ 24.736] (II) Initializing built-in extension SHAPE
[ 24.736] (II) Initializing built-in extension MIT-SHM
[ 24.736] (II) Initializing built-in extension XInputExtension
[ 24.736] (II) Initializing built-in extension XTEST
[ 24.736] (II) Initializing built-in extension BIG-REQUESTS
[ 24.736] (II) Initializing built-in extension SYNC
[ 24.736] (II) Initializing built-in extension XKEYBOARD
[ 24.736] (II) Initializing built-in extension XC-MISC
[ 24.736] (II) Initializing built-in extension SECURITY
[ 24.736] (II) Initializing built-in extension XINERAMA
[ 24.736] (II) Initializing built-in extension XFIXES
[ 24.736] (II) Initializing built-in extension RENDER
[ 24.736] (II) Initializing built-in extension RANDR
[ 24.736] (II) Initializing built-in extension COMPOSITE
[ 24.736] (II) Initializing built-in extension DAMAGE
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.737] ukiOpenDevice: node name is /dev/ati/card0
[ 24.737] ukiOpenDevice: open result is 16, (OK)
[ 24.737] ukiOpenByBusid: ukiOpenMinor returns 16
[ 24.737] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.513] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 25.597] (II) fglrx(0): Enable the clock gating!
[ 25.597] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 25.834] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 25.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.834] (II) LoadModule: "evdev"
[ 25.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (II) Module evdev: vendor="X.Org Foundation"
[ 25.840] compiled for 1.10.99.902, module version = 2.6.0
[ 25.840] Module class: X.Org XInput Driver
[ 25.840] ABI class: X.Org XInput driver, version 13.0
[ 25.840] (II) Using input driver 'evdev' for 'Power Button'
[ 25.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (**) Power Button: always reports core events
[ 25.840] (**) Power Button: Device: "/dev/input/event6"
[ 25.840] (--) Power Button: Found keys
[ 25.840] (II) Power Button: Configuring as keyboard
[ 25.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 25.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.840] (**) Option "xkb_rules" "evdev"
[ 25.840] (**) Option "xkb_model" "evdev"
[ 25.840] (**) Option "xkb_layout" "us"
[ 25.868] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 25.868] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.868] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.868] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event12"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 25.869] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event11"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input11/event11"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.869] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Power Button'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Power Button: always reports core events
[ 25.869] (**) Power Button: Device: "/dev/input/event4"
[ 25.869] (--) Power Button: Found keys
[ 25.869] (II) Power Button: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 25.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 25.870] (II) No input driver specified, ignoring this device.
[ 25.870] (II) This device may have been added with another device file.
[ 25.870] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 25.870] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Sleep Button: always reports core events
[ 25.870] (**) Sleep Button: Device: "/dev/input/event5"
[ 25.870] (--) Sleep Button: Found keys
[ 25.870] (II) Sleep Button: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 25.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event8)
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: always reports core events
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event8"
[ 25.870] (--) Laptop_Integrated_Webcam_FHD: Found keys
[ 25.870] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
[ 25.870] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 11)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 25.871] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 25.871] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.871] (**) Logitech USB Receiver: always reports core events
[ 25.871] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[ 25.871] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 25.871] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.871] (--) Logitech USB Receiver: Found relative axes
[ 25.871] (--) Logitech USB Receiver: Found x and y relative axes
[ 25.871] (II) Logitech USB Receiver: Configuring as mouse
[ 25.871] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.871] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.871] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
[ 25.871] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 25.871] (II) Logitech USB Receiver: initialized for relative axes.
[ 25.871] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 25.872] (II) No input driver specified, ignoring this device.
[ 25.872] (II) This device may have been added with another device file.
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 25.872] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) Logitech USB Receiver: always reports core events
[ 25.872] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 25.872] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 25.872] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.872] (--) Logitech USB Receiver: Found relative axes
[ 25.872] (--) Logitech USB Receiver: Found absolute axes
[ 25.872] (--) Logitech USB Receiver: Found keys
[ 25.872] (II) Logitech USB Receiver: Configuring as mouse
[ 25.872] (II) Logitech USB Receiver: Configuring as keyboard
[ 25.872] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.872] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.872] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.1/input/input2/event2"
[ 25.872] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 25.872] (**) Option "xkb_rules" "evdev"
[ 25.872] (**) Option "xkb_model" "evdev"
[ 25.872] (**) Option "xkb_layout" "us"
[ 25.872] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 25.872] (II) Logitech USB Receiver: initialized for absolute axes.
[ 25.872] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.872] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.872] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.872] (--) AT Translated Set 2 keyboard: Found keys
[ 25.872] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 25.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 25.873] (**) Option "xkb_rules" "evdev"
[ 25.873] (**) Option "xkb_model" "evdev"
[ 25.873] (**) Option "xkb_layout" "us"
[ 25.873] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 25.873] (II) LoadModule: "synaptics"
[ 25.873] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.883] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.884] compiled for 1.11.0, module version = 1.5.0
[ 25.884] Module class: X.Org XInput Driver
[ 25.884] ABI class: X.Org XInput driver, version 13.0
[ 25.884] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 25.884] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "Device" "/dev/input/event10"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 25.884] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 25.884] (**) Option "TapButton1" "1"
[ 25.884] (**) Option "TapButton2" "2"
[ 25.884] (**) Option "TapButton3" "3"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 25.884] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.885] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
[ 25.885] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 25.885] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) DualPoint Stick: always reports core events
[ 25.885] (**) DualPoint Stick: Device: "/dev/input/event9"
[ 25.885] (--) DualPoint Stick: Found 3 mouse buttons
[ 25.885] (--) DualPoint Stick: Found relative axes
[ 25.885] (--) DualPoint Stick: Found x and y relative axes
[ 25.885] (II) DualPoint Stick: Configuring as mouse
[ 25.885] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 25.885] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 25.885] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
[ 25.885] (II) DualPoint Stick: initialized for relative axes.
[ 25.885] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 25.885] (**) DualPoint Stick: (accel) acceleration profile 0
[ 25.885] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 25.885] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 25.885] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.885] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) Dell WMI hotkeys: always reports core events
[ 25.885] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[ 25.885] (--) Dell WMI hotkeys: Found keys
[ 25.885] (II) Dell WMI hotkeys: Configuring as keyboard
[ 25.885] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 25.885] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 25.885] (**) Option "xkb_rules" "evdev"
[ 25.886] (**) Option "xkb_model" "evdev"
[ 25.886] (**) Option "xkb_layout" "us"
[ 25.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 39.128] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 39.128] (II) fglrx(0): Printing DDC gathered Modelines:
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 52.382] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 52.382] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 53.649] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 53.649] (II) fglrx(0): Printing DDC gathered Modelines:
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.483] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.483] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.551] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.551] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.619] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.619] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.686] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.686] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.751] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.751] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.816] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.816] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.900] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.900] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.376] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.377] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.459] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.459] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.459] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.460] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.547] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.547] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.625] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.625] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.697] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.697] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0Hello,
i get the same messages without any problems for my intel card.
You can read more about it in this thread:
http://forums.gentoo.org/viewtopic-t-85 … ec66f93bf2
There are a fair amount of people who have posted their /proc/mtrr there, you can compare yours to them.
In the end they come to the conclusion, that uncachable entries are not a problem, for the most systems.
However uncachable regions of 1024MB seem to be too large.
On my mtrr the biggest uncachable entry is 64MB.
So you might get improvement from solving this. -
[concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)
final edit:
Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
[ 13.106]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.106] X Protocol Version 11, Revision 0
[ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 13.106] Build Date: 14 April 2014 08:39:09AM
[ 13.106]
[ 13.106] Current version of pixman: 0.32.4
[ 13.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
[ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.109] (==) ServerLayout "Layout0"
[ 13.109] (**) |-->Screen "Screen0" (0)
[ 13.109] (**) | |-->Monitor "Monitor0"
[ 13.110] (**) | |-->Device "Device0"
[ 13.110] (**) |-->Input Device "Keyboard0"
[ 13.110] (**) |-->Input Device "Mouse0"
[ 13.110] (**) Option "BlankTime" "0"
[ 13.110] (==) Automatically adding devices
[ 13.110] (==) Automatically enabling devices
[ 13.110] (==) Automatically adding GPU devices
[ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.112] Entry deleted from font path.
[ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.113] Entry deleted from font path.
[ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.114] Entry deleted from font path.
[ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.114] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.114] (WW) Disabling Keyboard0
[ 13.114] (WW) Disabling Mouse0
[ 13.114] (II) Loader magic: 0x804c80
[ 13.114] (II) Module ABI versions:
[ 13.114] X.Org ANSI C Emulation: 0.4
[ 13.114] X.Org Video Driver: 15.0
[ 13.114] X.Org XInput driver : 20.0
[ 13.114] X.Org Server Extension : 8.0
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.117] Initializing built-in extension Generic Event Extension
[ 13.117] Initializing built-in extension SHAPE
[ 13.117] Initializing built-in extension MIT-SHM
[ 13.117] Initializing built-in extension XInputExtension
[ 13.117] Initializing built-in extension XTEST
[ 13.117] Initializing built-in extension BIG-REQUESTS
[ 13.117] Initializing built-in extension SYNC
[ 13.117] Initializing built-in extension XKEYBOARD
[ 13.118] Initializing built-in extension XC-MISC
[ 13.118] Initializing built-in extension SECURITY
[ 13.118] Initializing built-in extension XINERAMA
[ 13.118] Initializing built-in extension XFIXES
[ 13.118] Initializing built-in extension RENDER
[ 13.118] Initializing built-in extension RANDR
[ 13.118] Initializing built-in extension COMPOSITE
[ 13.118] Initializing built-in extension DAMAGE
[ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.118] Initializing built-in extension DOUBLE-BUFFER
[ 13.118] Initializing built-in extension RECORD
[ 13.118] Initializing built-in extension DPMS
[ 13.118] Initializing built-in extension Present
[ 13.118] Initializing built-in extension DRI3
[ 13.118] Initializing built-in extension X-Resource
[ 13.118] Initializing built-in extension XVideo
[ 13.118] Initializing built-in extension XVideo-MotionCompensation
[ 13.118] Initializing built-in extension XFree86-VidModeExtension
[ 13.118] Initializing built-in extension XFree86-DGA
[ 13.119] Initializing built-in extension XFree86-DRI
[ 13.119] Initializing built-in extension DRI2
[ 13.119] (II) LoadModule: "glx"
[ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.212] compiled for 4.0.2, module version = 1.0.0
[ 13.212] Module class: X.Org Server Extension
[ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 13.212] Loading extension GLX
[ 13.212] (II) LoadModule: "nvidia"
[ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.219] compiled for 4.0.2, module version = 1.0.0
[ 13.219] Module class: X.Org Video Driver
[ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.220] (++) using VT number 1
[ 13.221] (II) Loading sub module "fb"
[ 13.221] (II) LoadModule: "fb"
[ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.222] (II) Module fb: vendor="X.Org Foundation"
[ 13.222] compiled for 1.15.1, module version = 1.0.0
[ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 13.222] (II) Loading sub module "wfb"
[ 13.222] (II) LoadModule: "wfb"
[ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.223] (II) Module wfb: vendor="X.Org Foundation"
[ 13.223] compiled for 1.15.1, module version = 1.0.0
[ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.223] (II) Loading sub module "ramdac"
[ 13.224] (II) LoadModule: "ramdac"
[ 13.224] (II) Module "ramdac" already built-in
[ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.237] (==) NVIDIA(0): RGB weight 888
[ 13.237] (==) NVIDIA(0): Default visual is TrueColor
[ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
[ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
[ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.238] (**) NVIDIA(0): Ignoring EDIDs
[ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
I do hope you can help.
Best regards.
edit:
Just for kicks, here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ya, it's a mess, but nothing particular wrong with is that I can see.
edit2:
Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
Start of NVIDIA bug report log file. Please include this file, along
with a detailed description of your problem, when reporting a graphics
driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
or by sending email to '[email protected]'.
nvidia-bug-report.sh Version: 17818519
Date: lør maj 31 21:11:50 CEST 2014
uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
command line flags:
*** /etc/issue
*** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
Arch Linux \r (\l)
*** /var/log/nvidia-installer.log does not exist
*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
[ 11.874]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.874] X Protocol Version 11, Revision 0
[ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 11.875] Build Date: 14 April 2014 08:39:09AM
[ 11.875]
[ 11.875] Current version of pixman: 0.32.4
[ 11.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
[ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.878] (==) ServerLayout "Layout0"
[ 11.878] (**) |-->Screen "Screen0" (0)
[ 11.878] (**) | |-->Monitor "Monitor0"
[ 11.878] (**) | |-->Device "Device0"
[ 11.878] (**) |-->Input Device "Keyboard0"
[ 11.878] (**) |-->Input Device "Mouse0"
[ 11.878] (**) Option "BlankTime" "0"
[ 11.878] (==) Automatically adding devices
[ 11.878] (==) Automatically enabling devices
[ 11.878] (==) Automatically adding GPU devices
[ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.881] Entry deleted from font path.
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.882] (WW) Disabling Keyboard0
[ 11.882] (WW) Disabling Mouse0
[ 11.882] (II) Loader magic: 0x804c80
[ 11.882] (II) Module ABI versions:
[ 11.882] X.Org ANSI C Emulation: 0.4
[ 11.882] X.Org Video Driver: 15.0
[ 11.882] X.Org XInput driver : 20.0
[ 11.882] X.Org Server Extension : 8.0
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.886] Initializing built-in extension Generic Event Extension
[ 11.886] Initializing built-in extension SHAPE
[ 11.886] Initializing built-in extension MIT-SHM
[ 11.886] Initializing built-in extension XInputExtension
[ 11.886] Initializing built-in extension XTEST
[ 11.886] Initializing built-in extension BIG-REQUESTS
[ 11.886] Initializing built-in extension SYNC
[ 11.886] Initializing built-in extension XKEYBOARD
[ 11.886] Initializing built-in extension XC-MISC
[ 11.886] Initializing built-in extension SECURITY
[ 11.886] Initializing built-in extension XINERAMA
[ 11.886] Initializing built-in extension XFIXES
[ 11.886] Initializing built-in extension RENDER
[ 11.886] Initializing built-in extension RANDR
[ 11.886] Initializing built-in extension COMPOSITE
[ 11.886] Initializing built-in extension DAMAGE
[ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.886] Initializing built-in extension DOUBLE-BUFFER
[ 11.887] Initializing built-in extension RECORD
[ 11.887] Initializing built-in extension DPMS
[ 11.887] Initializing built-in extension Present
[ 11.887] Initializing built-in extension DRI3
[ 11.887] Initializing built-in extension X-Resource
[ 11.887] Initializing built-in extension XVideo
[ 11.887] Initializing built-in extension XVideo-MotionCompensation
[ 11.887] Initializing built-in extension XFree86-VidModeExtension
[ 11.887] Initializing built-in extension XFree86-DGA
[ 11.887] Initializing built-in extension XFree86-DRI
[ 11.887] Initializing built-in extension DRI2
[ 11.887] (II) LoadModule: "glx"
[ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.978] compiled for 4.0.2, module version = 1.0.0
[ 11.978] Module class: X.Org Server Extension
[ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 11.979] Loading extension GLX
[ 11.979] (II) LoadModule: "nvidia"
[ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.986] compiled for 4.0.2, module version = 1.0.0
[ 11.986] Module class: X.Org Video Driver
[ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.987] (++) using VT number 1
[ 11.988] (II) Loading sub module "fb"
[ 11.988] (II) LoadModule: "fb"
[ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.989] (II) Module fb: vendor="X.Org Foundation"
[ 11.989] compiled for 1.15.1, module version = 1.0.0
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11.989] (II) Loading sub module "wfb"
[ 11.989] (II) LoadModule: "wfb"
[ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.990] (II) Module wfb: vendor="X.Org Foundation"
[ 11.990] compiled for 1.15.1, module version = 1.0.0
[ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.990] (II) Loading sub module "ramdac"
[ 11.990] (II) LoadModule: "ramdac"
[ 11.990] (II) Module "ramdac" already built-in
[ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.004] (==) NVIDIA(0): RGB weight 888
[ 12.004] (==) NVIDIA(0): Default visual is TrueColor
[ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
[ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
[ 12.004] (**) NVIDIA(0): Ignoring EDIDs
[ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
*** /etc/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
*** /etc/X11/xorg.conf.d/10-keyboard.conf
*** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "dk"
Option "XkbModel" "pc104"
Option "XkbVariant" "qwerty"
EndSection
*** /etc/X11/xorg.conf.d/10-quirks.conf
*** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
*** /home/zacariaz/.nvidia-settings-rc
*** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
# /home/zacariaz/.nvidia-settings-rc
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sat May 31 20:34:36 2014
# ConfigProperties:
RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
Timer = Thermal_Monitor_(GPU_1),Yes,1000
Timer = Memory_Used_(GPU_1),Yes,3000
Timer = Memory_Used_(GPU_0),Yes,3000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
# Attributes:
0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=3
0/FSAAAppEnhanced=0
0/XVideoSyncToDisplayID=VGA-0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/RedBrightness=0.000000
[DPY:LVDS-0]/GreenBrightness=0.000000
[DPY:LVDS-0]/BlueBrightness=0.000000
[DPY:LVDS-0]/RedContrast=0.000000
[DPY:LVDS-0]/GreenContrast=0.000000
[DPY:LVDS-0]/BlueContrast=0.000000
[DPY:LVDS-0]/RedGamma=1.000000
[DPY:LVDS-0]/GreenGamma=1.000000
[DPY:LVDS-0]/BlueGamma=1.000000
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/DigitalVibrance=0
[DPY:LVDS-0]/ColorSpace=0
[DPY:LVDS-0]/ColorRange=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
*** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
*** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
# Application profiles for the NVIDIA Linux graphics driver, version 337.19
# Last modified: Tue Apr 29 19:51:54 PDT 2014
# These profiles were provided by NVIDIA and should not be modified. If you
# wish to change the defaults provided here, you can override them by creating
# custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
# system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
# (which will apply to that particular user). See the "APPLICATION PROFILE
# SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
# information.
"profiles" : [
"name" : "NonConformantBlitFramebufferScissor",
"settings" : [ "GLConformantBlitFramebufferScissor", false ]
"name" : "CL1C",
"settings" : [ "0x528ab3", 1 ]
"name" : "FA0",
"settings" : [ "10572898", 0 ]
"name" : "ExactGLESVersion",
"settings" : [ "ForceRequestedESVersion", 1 ]
"name" : "BGTE",
"settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
"rules" : [
# Work around GNOME bug 690451 (see
# https://bugzilla.gnome.org/show_bug.cgi?id=690451)
"pattern" : {
"feature" : "dso",
"matches" : "libcogl.so"
"profile" : "NonConformantBlitFramebufferScissor"
{ "pattern" : "Maya2014", "profile" : "CL1C" },
{ "pattern" : "xsi", "profile" : "CL1C" },
{ "pattern" : "HoudiniFX", "profile" : "CL1C" },
{ "pattern" : "katana", "profile" : "CL1C" },
{ "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
{ "pattern" : "octane", "profile" : "CL1C" },
{ "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
{ "pattern" : "Nuke7.0", "profile" : "CL1C" },
{ "pattern" : "vray.exe", "profile" : "CL1C" },
{ "pattern" : "vray.bin", "profile" : "CL1C" },
{ "pattern" : "kwin_gles", "profile" : "FA0" },
{ "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
{ "pattern" : "heaven_x86", "profile" : "BGTE" },
{ "pattern" : "heaven_x64", "profile" : "BGTE" }
Skipping ldd output (glxinfo not found)
/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at b4080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/sbin/lspci -d "10b5:*" -v -xxx
/sbin/lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
+-01.1-[02]----00.0
+-14.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[03]----00.0
+-1c.1-[04]----00.0
+-1c.3-[05]--+-00.0
| +-00.2
| +-00.3
| \-00.4
+-1d.0
+-1f.0
+-1f.2
\-1f.3
/sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
/sbin/lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Skipping dmidecode output (dmidecode not found)
/sbin/modinfo nvidia | grep vermagic
vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log is not readable
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
[ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
[ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
[ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
[ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
[ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
[ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
[ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask F80000000 write-back
[ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 460000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
[ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
[ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x993fffff] page 2M
[ 0.000000] [mem 0x99400000-0x995affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
[ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
[ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009f7bb000 000040
[ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x995affff]
[ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x45effffff]
[ 0.000000] On node 0 totalpages: 4180807
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10031 pages used for memmap
[ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.558 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20131218
[ 0.006081] ACPI: All ACPI Tables successfully acquired
[ 0.030009] Security Framework initialized
[ 0.030016] Yama: becoming mindful.
[ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037118] Initializing cgroup subsys memory
[ 0.037123] Initializing cgroup subsys devices
[ 0.037125] Initializing cgroup subsys freezer
[ 0.037126] Initializing cgroup subsys net_cls
[ 0.037127] Initializing cgroup subsys blkio
[ 0.037150] CPU: Physical Processor ID: 0
[ 0.037151] CPU: Processor Core ID: 0
[ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037529] mce: CPU supports 9 MCE banks
[ 0.037542] CPU0: Thermal monitoring enabled (TM1)
[ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[ 0.041198] ftrace: allocating 20029 entries in 79 pages
[ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.084036] TSC deadline timer enabled
[ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.084051] ... version: 3
[ 0.084052] ... bit width: 48
[ 0.084053] ... generic registers: 4
[ 0.084054] ... value mask: 0000ffffffffffff
[ 0.084055] ... max period: 0000ffffffffffff
[ 0.084056] ... fixed-purpose events: 3
[ 0.084057] ... event mask: 000000070000000f
[ 0.110826] x86: Booting SMP configuration:
[ 0.110828] .... node #0, CPUs: #1
[ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131276] #2 #3 #4 #5 #6 #7
[ 0.246855] x86: Booted up 1 node, 8 CPUs
[ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
[ 0.254157] devtmpfs: initialized
[ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[ 0.258171] pinctrl core: initialized pinctrl subsystem
[ 0.258207] RTC time: 19:11:33, date: 05/31/14
[ 0.258239] NET: Registered protocol family 16
[ 0.258316] cpuidle: using governor ladder
[ 0.258318] cpuidle: using governor menu
[ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.258362] ACPI: bus type PCI registered
[ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.266014] PCI: Using configuration type 1 for base access
[ 0.266838] bio: create slab <bio-0> at 0
[ 0.266930] ACPI: Added _OSI(Module Device)
[ 0.266932] ACPI: Added _OSI(Processor Device)
[ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269731] ACPI: Executed 1 bTrilby wrote:
zacariaz wrote:* b u m p *
Do not do this.
If you want help, start providing relevant information beyond "it don't work". You say you followed the instructions ... which instructions? What steps did you take? It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki. Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that. Don't keep us in the dark.
I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
I do not believe I've left any information out.
Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything. -
Unable to start gnome-session or gdm
Sorry for the vague title. I don't really have any specifics to go on for this problem.
When I try to start a gnome-session through startx, I get a screen that says, "Oh no! Something has gone wrong", with no error outputs in xsession-errors.
First off is some system info. I'm running a Thinkpad T540p:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208M [GeForce GT 730M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
Here is my xorg.conf file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Here is my .xinitrc file:
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --setprovideroutputsource 0x46 0x2b4
xrandr --output LVDS-0 --off
xrandr --auto
exec gnome-session
And the Xorg.0.log file:
[ 2483.841]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2483.844] X Protocol Version 11, Revision 0
[ 2483.845] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2483.846] Current Operating System: Linux slabity-laptop 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 2483.846] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=acc69edd-1cf4-4c10-80de-e8a50d304800 rw quiet
[ 2483.848] Build Date: 13 December 2013 03:11:42PM
[ 2483.849]
[ 2483.850] Current version of pixman: 0.32.4
[ 2483.852] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2483.852] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2483.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 19:04:26 2013
[ 2483.857] (==) Using config file: "/etc/X11/xorg.conf"
[ 2483.858] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2483.858] (==) ServerLayout "layout"
[ 2483.858] (**) |-->Screen "nvidia" (0)
[ 2483.858] (**) | |-->Monitor "<default monitor>"
[ 2483.858] (**) | |-->Device "nvidia"
[ 2483.858] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 2483.858] (**) |-->Inactive Device "intel"
[ 2483.858] (**) |-->Input Device "Keyboard0"
[ 2483.858] (**) |-->Input Device "Mouse0"
[ 2483.858] (==) Automatically adding devices
[ 2483.858] (==) Automatically enabling devices
[ 2483.858] (==) Automatically adding GPU devices
[ 2483.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2483.858] Entry deleted from font path.
[ 2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2483.858] Entry deleted from font path.
[ 2483.858] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2483.858] Entry deleted from font path.
[ 2483.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2483.858] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2483.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2483.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2483.858] (WW) Disabling Keyboard0
[ 2483.858] (WW) Disabling Mouse0
[ 2483.858] (II) Loader magic: 0x7fec20
[ 2483.858] (II) Module ABI versions:
[ 2483.858] X.Org ANSI C Emulation: 0.4
[ 2483.858] X.Org Video Driver: 14.1
[ 2483.858] X.Org XInput driver : 19.1
[ 2483.858] X.Org Server Extension : 7.0
[ 2483.858] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2483.858] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2483.860] (--) PCI:*(0:0:2:0) 8086:0416:17aa:2211 rev 6, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 2483.860] (--) PCI: (0:1:0:0) 10de:1290:17aa:2211 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128
[ 2483.861] Initializing built-in extension Generic Event Extension
[ 2483.862] Initializing built-in extension SHAPE
[ 2483.863] Initializing built-in extension MIT-SHM
[ 2483.864] Initializing built-in extension XInputExtension
[ 2483.865] Initializing built-in extension XTEST
[ 2483.866] Initializing built-in extension BIG-REQUESTS
[ 2483.867] Initializing built-in extension SYNC
[ 2483.867] Initializing built-in extension XKEYBOARD
[ 2483.868] Initializing built-in extension XC-MISC
[ 2483.869] Initializing built-in extension SECURITY
[ 2483.870] Initializing built-in extension XINERAMA
[ 2483.871] Initializing built-in extension XFIXES
[ 2483.872] Initializing built-in extension RENDER
[ 2483.873] Initializing built-in extension RANDR
[ 2483.874] Initializing built-in extension COMPOSITE
[ 2483.874] Initializing built-in extension DAMAGE
[ 2483.875] Initializing built-in extension MIT-SCREEN-SAVER
[ 2483.876] Initializing built-in extension DOUBLE-BUFFER
[ 2483.877] Initializing built-in extension RECORD
[ 2483.878] Initializing built-in extension DPMS
[ 2483.879] Initializing built-in extension X-Resource
[ 2483.879] Initializing built-in extension XVideo
[ 2483.880] Initializing built-in extension XVideo-MotionCompensation
[ 2483.881] Initializing built-in extension XFree86-VidModeExtension
[ 2483.882] Initializing built-in extension XFree86-DGA
[ 2483.883] Initializing built-in extension XFree86-DRI
[ 2483.884] Initializing built-in extension DRI2
[ 2483.884] (II) LoadModule: "glx"
[ 2483.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2483.892] (II) Module glx: vendor="NVIDIA Corporation"
[ 2483.892] compiled for 4.0.2, module version = 1.0.0
[ 2483.892] Module class: X.Org Server Extension
[ 2483.892] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 2483.892] Loading extension GLX
[ 2483.892] (II) LoadModule: "nvidia"
[ 2483.892] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2483.893] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2483.893] compiled for 4.0.2, module version = 1.0.0
[ 2483.893] Module class: X.Org Video Driver
[ 2483.893] (II) LoadModule: "modesetting"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2483.893] (II) Module modesetting: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.4, module version = 0.8.1
[ 2483.893] Module class: X.Org Video Driver
[ 2483.893] ABI class: X.Org Video Driver, version 14.1
[ 2483.893] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 2483.893] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2483.893] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2483.893] (++) using VT number 1
[ 2483.893] (II) Loading sub module "fb"
[ 2483.893] (II) LoadModule: "fb"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2483.893] (II) Module fb: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.5, module version = 1.0.0
[ 2483.893] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2483.893] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 2483.893] (II) Loading sub module "wfb"
[ 2483.893] (II) LoadModule: "wfb"
[ 2483.893] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2483.893] (II) Module wfb: vendor="X.Org Foundation"
[ 2483.893] compiled for 1.14.5, module version = 1.0.0
[ 2483.893] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2483.893] (II) Loading sub module "ramdac"
[ 2483.893] (II) LoadModule: "ramdac"
[ 2483.893] (II) Module "ramdac" already built-in
[ 2483.893] (II) modesetting(1): using drv /dev/dri/card1
[ 2483.893] (II) modesetting(G0): using drv /dev/dri/card1
[ 2483.893] (EE) Screen 1 deleted because of no matching config section.
[ 2483.893] (II) UnloadModule: "modesetting"
[ 2483.894] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 2483.894] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2483.894] (==) NVIDIA(0): RGB weight 888
[ 2483.894] (==) NVIDIA(0): Default visual is TrueColor
[ 2483.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2483.894] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 2483.894] (**) NVIDIA(0): Enabling 2D acceleration
[ 2484.064] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 2484.065] (II) NVIDIA(0): NVIDIA GPU GeForce GT 730M (GK208) at PCI:1:0:0 (GPU-0)
[ 2484.065] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 2484.065] (--) NVIDIA(0): VideoBIOS: 80.28.2a.00.30
[ 2484.065] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 2484.065] (--) NVIDIA(0): Valid display device(s) on GeForce GT 730M at PCI:1:0:0
[ 2484.065] (--) NVIDIA(0): none
[ 2484.065] (II) NVIDIA(0): Validated MetaModes:
[ 2484.065] (II) NVIDIA(0): "NULL"
[ 2484.065] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 2484.065] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 2484.065] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2484.065] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 2484.065] (==) modesetting(G0): RGB weight 888
[ 2484.065] (==) modesetting(G0): Default visual is TrueColor
[ 2484.065] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 2484.065] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[ 2484.067] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 2484.067] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 2484.093] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 2484.093] (II) modesetting(G0): Output DisplayPort-1-1 has no monitor section
[ 2484.093] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[ 2484.093] (II) modesetting(G0): EDID for output eDP-1-0
[ 2484.093] (II) modesetting(G0): Manufacturer: MEI Model: 96a2 Serial#: 0
[ 2484.093] (II) modesetting(G0): Year: 2013 Week: 255
[ 2484.093] (II) modesetting(G0): EDID Version: 1.4
[ 2484.093] (II) modesetting(G0): Digital Display Input
[ 2484.093] (II) modesetting(G0): 8 bits per channel
[ 2484.093] (II) modesetting(G0): Digital interface is DisplayPort
[ 2484.093] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 2484.093] (II) modesetting(G0): Gamma: 2.20
[ 2484.093] (II) modesetting(G0): No DPMS capabilities specified
[ 2484.093] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
[ 2484.093] (II) modesetting(G0): First detailed timing is preferred mode
[ 2484.093] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[ 2484.093] (II) modesetting(G0): redX: 0.652 redY: 0.329 greenX: 0.324 greenY: 0.600
[ 2484.093] (II) modesetting(G0): blueX: 0.150 blueY: 0.045 whiteX: 0.312 whiteY: 0.329
[ 2484.093] (II) modesetting(G0): Manufacturer's mask: 0
[ 2484.093] (II) modesetting(G0): Supported detailed timing:
[ 2484.093] (II) modesetting(G0): clock: 302.5 MHz Image Size: 344 x 193 mm
[ 2484.093] (II) modesetting(G0): h_active: 2880 h_sync: 2924 h_sync_end 2928 h_blank_end 3076 h_border: 0
[ 2484.093] (II) modesetting(G0): v_active: 1620 v_sync: 1629 v_sync_end 1630 v_blanking: 1640 v_border: 0
[ 2484.093] (II) modesetting(G0): Supported detailed timing:
[ 2484.093] (II) modesetting(G0): clock: 302.5 MHz Image Size: 344 x 193 mm
[ 2484.093] (II) modesetting(G0): h_active: 2880 h_sync: 2924 h_sync_end 2928 h_blank_end 3076 h_border: 0
[ 2484.093] (II) modesetting(G0): v_active: 1620 v_sync: 1629 v_sync_end 1630 v_blanking: 1967 v_border: 0
[ 2484.093] (II) modesetting(G0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max: 100 kHz, PixClock max 305 MHz
[ 2484.093] (II) modesetting(G0): VVX16T028J00
[ 2484.093] (II) modesetting(G0): EDID (in hex):
[ 2484.093] (II) modesetting(G0): 00ffffffffffff0034a9a29600000000
[ 2484.093] (II) modesetting(G0): ff170104a52213780212a1a754539926
[ 2484.093] (II) modesetting(G0): 0b505400000001010101010101010101
[ 2484.093] (II) modesetting(G0): 0101010101012a7640c4b05414602c04
[ 2484.093] (II) modesetting(G0): 910058c11000001e2a7640c4b0545b61
[ 2484.093] (II) modesetting(G0): 2c04910058c11000001e000000fd0031
[ 2484.093] (II) modesetting(G0): 3d60641e010a202020202020000000fe
[ 2484.093] (II) modesetting(G0): 005656583136543032384a30300a0050
[ 2484.093] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 2484.093] (II) modesetting(G0): Modeline "2880x1620"x60.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2484.093] (II) modesetting(G0): Modeline "2880x1620"x50.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2484.093] (II) modesetting(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 2484.093] (II) modesetting(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2484.094] (II) modesetting(G0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2484.095] (II) modesetting(G0): EDID for output VGA-1-0
[ 2484.095] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 2484.119] (II) modesetting(G0): EDID for output HDMI-1-0
[ 2484.119] (II) modesetting(G0): EDID for output DisplayPort-1-1
[ 2484.120] (II) modesetting(G0): EDID for output HDMI-1-1
[ 2484.120] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2484.120] (==) modesetting(G0): DPI set to (96, 96)
[ 2484.120] (II) Loading sub module "fb"
[ 2484.120] (II) LoadModule: "fb"
[ 2484.120] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2484.120] (II) Module fb: vendor="X.Org Foundation"
[ 2484.120] compiled for 1.14.5, module version = 1.0.0
[ 2484.120] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2484.120] (II) Loading sub module "shadow"
[ 2484.120] (II) LoadModule: "shadow"
[ 2484.120] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2484.120] (II) Module shadow: vendor="X.Org Foundation"
[ 2484.120] compiled for 1.14.5, module version = 1.1.0
[ 2484.120] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2484.120] (--) Depth 24 pixmap format is 32 bpp
[ 2484.120] (==) modesetting(G0): Backing store disabled
[ 2484.120] (==) modesetting(G0): Silken mouse enabled
[ 2484.120] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2484.121] (==) modesetting(G0): DPMS enabled
[ 2484.121] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 2485.183] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2485.183] (II) NVIDIA: access.
[ 2485.187] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2485.187] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2485.187] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2485.187] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2485.187] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2485.187] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2485.187] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2485.187] (II) NVIDIA(0): Config Options in the README.
[ 2485.187] (II) NVIDIA(0): Setting mode "NULL"
[ 2485.187] (EE) NVIDIA(0): Failed to initiate mode change.
[ 2485.187] (EE) NVIDIA(0): Failed to complete mode change
[ 2485.196] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 2485.196] Loading extension NV-GLX
[ 2485.201] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2485.201] (==) NVIDIA(0): Backing store disabled
[ 2485.201] (==) NVIDIA(0): Silken mouse enabled
[ 2485.201] (==) NVIDIA(0): DPMS enabled
[ 2485.201] Loading extension NV-CONTROL
[ 2485.201] (II) Loading sub module "dri2"
[ 2485.201] (II) LoadModule: "dri2"
[ 2485.201] (II) Module "dri2" already built-in
[ 2485.201] (II) NVIDIA(0): [DRI2] Setup complete
[ 2485.201] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2485.201] (--) RandR disabled
[ 2485.204] (II) Initializing extension GLX
[ 2485.205] (II) modesetting(G0): Damage tracking initialized
[ 2485.227] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2485.227] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2485.227] (II) LoadModule: "evdev"
[ 2485.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2485.227] (II) Module evdev: vendor="X.Org Foundation"
[ 2485.227] compiled for 1.14.3, module version = 2.8.2
[ 2485.227] Module class: X.Org XInput Driver
[ 2485.228] ABI class: X.Org XInput driver, version 19.1
[ 2485.228] (II) Using input driver 'evdev' for 'Power Button'
[ 2485.228] (**) Power Button: always reports core events
[ 2485.228] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2485.228] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2485.228] (--) evdev: Power Button: Found keys
[ 2485.228] (II) evdev: Power Button: Configuring as keyboard
[ 2485.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2485.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2485.228] (**) Option "xkb_rules" "evdev"
[ 2485.228] (**) Option "xkb_model" "pc104"
[ 2485.228] (**) Option "xkb_layout" "us"
[ 2485.240] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 2485.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2485.240] (II) Using input driver 'evdev' for 'Video Bus'
[ 2485.240] (**) Video Bus: always reports core events
[ 2485.240] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 2485.240] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2485.240] (--) evdev: Video Bus: Found keys
[ 2485.240] (II) evdev: Video Bus: Configuring as keyboard
[ 2485.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10"
[ 2485.240] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2485.240] (**) Option "xkb_rules" "evdev"
[ 2485.240] (**) Option "xkb_model" "pc104"
[ 2485.241] (**) Option "xkb_layout" "us"
[ 2485.241] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 2485.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2485.241] (II) Using input driver 'evdev' for 'Video Bus'
[ 2485.241] (**) Video Bus: always reports core events
[ 2485.241] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 2485.241] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2485.241] (--) evdev: Video Bus: Found keys
[ 2485.241] (II) evdev: Video Bus: Configuring as keyboard
[ 2485.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input13/event11"
[ 2485.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2485.241] (**) Option "xkb_rules" "evdev"
[ 2485.241] (**) Option "xkb_model" "pc104"
[ 2485.241] (**) Option "xkb_layout" "us"
[ 2485.241] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2485.241] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event13)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event12)
[ 2485.241] (II) No input driver specified, ignoring this device.
[ 2485.241] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 2485.242] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 2485.242] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 2485.242] (**) Integrated Camera: always reports core events
[ 2485.242] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[ 2485.242] (--) evdev: Integrated Camera: Vendor 0x4ca Product 0x7035
[ 2485.242] (--) evdev: Integrated Camera: Found keys
[ 2485.242] (II) evdev: Integrated Camera: Configuring as keyboard
[ 2485.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input10/event8"
[ 2485.242] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 2485.242] (**) Option "xkb_rules" "evdev"
[ 2485.242] (**) Option "xkb_model" "pc104"
[ 2485.242] (**) Option "xkb_layout" "us"
[ 2485.242] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 2485.242] (II) No input driver specified, ignoring this device.
[ 2485.242] (II) This device may have been added with another device file.
[ 2485.242] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2485.242] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2485.242] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2485.242] (**) AT Translated Set 2 keyboard: always reports core events
[ 2485.242] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2485.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2485.242] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2485.242] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2485.242] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2485.242] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2485.242] (**) Option "xkb_rules" "evdev"
[ 2485.242] (**) Option "xkb_model" "pc104"
[ 2485.242] (**) Option "xkb_layout" "us"
[ 2485.242] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2485.242] (II) LoadModule: "synaptics"
[ 2485.242] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2485.242] (II) Module synaptics: vendor="X.Org Foundation"
[ 2485.242] compiled for 1.14.4, module version = 1.7.2
[ 2485.242] Module class: X.Org XInput Driver
[ 2485.242] ABI class: X.Org XInput driver, version 19.1
[ 2485.242] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2485.242] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2485.242] (**) Option "Device" "/dev/input/event9"
[ 2485.356] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5112 (res 42)
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 3834 (res 42)
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2485.356] (**) Option "TapButton1" "1"
[ 2485.356] (**) Option "TapButton2" "2"
[ 2485.356] (**) Option "TapButton3" "3"
[ 2485.356] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2485.356] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[ 2485.383] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.046
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2485.383] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2485.383] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2485.383] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2485.383] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 2485.383] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2485.383] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 2485.383] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2485.383] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2485.383] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input11/event15"
[ 2485.383] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 2485.383] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2485.384] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 2485.384] (II) No input driver specified, ignoring this device.
[ 2485.384] (II) This device may have been added with another device file.
[ 2485.384] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2485.384] (II) No input driver specified, ignoring this device.
[ 2485.384] (II) This device may have been added with another device file.
[ 2485.384] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event3)
[ 2485.384] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2485.384] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 2485.384] (**) ThinkPad Extra Buttons: always reports core events
[ 2485.384] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event3"
[ 2485.384] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 2485.384] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 2485.384] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 2485.384] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event3"
[ 2485.384] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 2485.384] (**) Option "xkb_rules" "evdev"
[ 2485.384] (**) Option "xkb_model" "pc104"
[ 2485.384] (**) Option "xkb_layout" "us"
[ 2485.391] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.391] (II) modesetting(G0): Using EDID range info for horizontal sync
[ 2485.391] (II) modesetting(G0): Using EDID range info for vertical refresh
[ 2485.391] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.420] reporting 3 6 26 203
[ 2485.421] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.421] (II) modesetting(G0): Using hsync ranges from config file
[ 2485.421] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2485.421] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.450] reporting 3 6 26 203
[ 2485.467] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2485.467] (II) modesetting(G0): Using hsync ranges from config file
[ 2485.467] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2485.467] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2485.493] reporting 3 6 26 203
[ 2485.510] have a master to look out for
[ 2485.510] adjust shatters 0 2880
[ 2485.515] need to create shared pixmap 1reporting 3 6 26 203
[ 2486.236] reporting 3 6 26 203
[ 2486.345] reporting 3 6 26 203
[ 2486.373] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2486.373] (II) modesetting(G0): Using hsync ranges from config file
[ 2486.373] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2486.373] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2486.400] reporting 3 6 26 203
[ 2486.463] reporting 3 6 26 203
[ 2486.483] reporting 3 6 26 203
[ 2486.605] reporting 3 6 26 203
[ 2486.636] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[ 2486.636] (II) modesetting(G0): Using hsync ranges from config file
[ 2486.636] (II) modesetting(G0): Using vrefresh ranges from config file
[ 2486.636] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[ 2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[ 2486.663] reporting 3 6 26 203
[ 2486.724] reporting 3 6 26 203
[ 2486.840] reporting 3 6 26 203
[ 2486.844] reporting 3 6 26 203
[ 2486.868] reporting 3 6 26 203
[ 2493.841] (II) evdev: ThinkPad Extra Buttons: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) UnloadModule: "synaptics"
[ 2493.841] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Integrated Camera: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Video Bus: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Video Bus: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.841] (II) evdev: Power Button: Close
[ 2493.841] (II) UnloadModule: "evdev"
[ 2493.863] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 2494.409] (EE) Server terminated successfully (0). Closing log file.
I'm pretty lost now. I finally managed to get X working on my Nvidia/Intel combination with twm, but it refuses to work with gnome-session.
Any ideas?Same problem for me too!
After kernel update on restarting GDM try to start but fails. I've last nvidia-173xx driver installed.
I've solved the problem forcing nvdia driver reinstallation. This is my Xserver log!
Maybe you are looking for
-
Pixma ip6000d windows 7 driver issue. How do you get one?
Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.
-
DNG Profile Editor (& new camera profiles)
Anybody who thinks Camera Raw can't pretty much nail the colors of the camera makers colors should check out http://labs.adobe.com/wiki/index.php/DNG_Profiles You'll need Camera Raw 4.5 or Lightroom 2.0 to use the profiles...
-
[iCal Server] Error when importing an .ics file received by e-mail
Hi, I am setting up an iCal server. My SL server is member of my Active Directory with an extended schema. My SL server is also an OD master My AD users can connect to the iCal server, add events and delegates, send invites to each other without any
-
Restrict user to concurrent use
Hi all I am a administrator and i create an user who only able to view the reports. Now can anyone help me how can I restrict that user not to log in from different PC at the same time. Thank you for helping me. Md. Nahiduzzaman
-
ITunes 7 not working!!!! How to reinstall previous version?
After installed iTunes 7.01, when I click on "Filmati" the program crashes with a program error message, so I'm not able to copy all my moovies from my computer to iPod Video 30G. I tried to install them manually (without sync) and iTunes cancelled a