Chipset drivers for Z77MA-G45 i3-2120 cpu ?

Hello,
the readme file that is enclosed with these (intel_chipset_7_mb.zip) chipset drivers says this:
* Product: Intel(R) Chipset Device Software
* Release: Production Version
* Version: 9.4.0.1026
* Target PCH/Chipset: Xeon(R) processor E3-1200 v3,Intel(R) 4th Gen Core processor
* Intel(R) 8 Series,C220 Series
* Date: August 08 2013
NOTE:
For the list of supported chipsets, please refer
to the Release Notes
my motherboard is a Z77MA-G45 and my processor is a i3-2120. is this readme file saying that this driver is NOT for me?
where do I find 'Release Notes'?
thanks

Quote from: ejames82 on 19-December-13, 23:14:48
where do I find 'Release Notes'?
thanks
Read the ReleaseNotes_9.4.0.1026.htm file inside of the ZIP package.
Just install the driver and don't worry about other things.
It's a "generic" one and includes the libraries for most of the chipsets (including yours).

Similar Messages

Chipset Drivers for C855D-S5320 using AMD E2-1800 processor

Rebuilding to Windows 7. Install went fine but know in need of Chipset Drivers for the AMD E2-1800 processor with built in graphics. Scoured Toshiba but could only find Intel drivers. Similar luck at AMD. Any suggestions where to locate drivers?
Solved!
Go to Solution.

Satellite C855D-S5320 (PSCBQU-00E007)
You're in luck! Somebody has posted the drivers required for this model.
Satellite C855D-S5315 (PSCBQU-00F009)
Since they share the part-number family (PSCBQU), the same drivers should work.
How I installed windows 7 on a Satellite C855D-S5315
-Jerry

AGP Chipset drivers for Discovery motherboard

I have a Packard bell idelsign 180 with a discovery MS6506 v1.0 motherboard. which is running with Intel 845 chipset. It is currently not loading up correctly - the screen goes black and then eventually recovers during startup. the error is something to do with graphics accelerator. ATI, who make the video care have suggested that I need to update the chipset drivers for the Intel AGP Controller, which are currently shown as North Bridge Chipset drivers dated 30/7/2001, but I can not find the right drivers. I have had a look on the intel site, and the MSI site, but could not find anythinf suitable.
Any assistance would be gratefully received.
Thank you in advance for your help....

Hello to you both.
As suggested I removed the graphics card and booted up the pc. Right away there were 8 beeps and a gap, followed by 2 beeps and a gap, followed by one beep. From this point it went quiet, so i switched the pc off, reinstalled the card and booted it up again.
During the boot up sequence with the card installed there was one beep immediately after he power button was pressed and before the packard bell logo came up, and another beep between the packard bell logo and microsoft xp logo. It got most of the programs loaded before the screen went black and then took a few minutes to recover and finish loading up. during the loadup stage the cursor was accompanied by an "eggtimer". just before the screen went black the cursor and eggtimer were replaced with a larger eggtimer on its own. - I don't know if that is significant?
Once up and running an error message came up saying that "vpu recover had reset the graphics accelerator as was no longer responding to the graphic driver"......
If the above does not point to an obvious fault and you think there is a chance it could still be the chipset drivers, please could you advise me as to the best ones to use. I have looked on both the intel site and the MSI site but could not find anything appropriate.
Thank you again for your help with this problem.

Win 7 Pro chipset drivers for dc 7100

Hi
I have a dc 7100 small form factor desktop running XP Pro. I wish to upgrade to Win 7 Pro but Windows Advisor says my chipset is not compatable. When I go to the HP download site for drivers the only drivers on the list are dated 2005. Where can I get the correct ones?
Thanks,
Steve

Hi, Steve:
Below is the W7 chipset driver for your PC.
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=861&DwnldID=20019&keyword=Chipset+inst...
Neither the dc7100 nor the dc7600 are supported by HP for W7 (although the dc7600 runs W7 just fine).
So, you will not find any W7 drivers provided by HP for either model.
The dc7100 has a problem if you have the onboard graphics. It is not W7 capable. That is why the upgrade advisor is reporting the chipset is incompatible. It means the video chipset is incompatible and it is.
You will never have Aero.
Install the above chipset driver first and reboot.
I have a a workaround to get the onboard graphics to work so you can change the video resolution and have graphics acceleration:
Download and run this Vista driver from the nc6120 notebook. You will probably get an unsupported operating system error. Close out of any error windows.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-472...
Go to the device manager and expand the display adapters section. Click on the standard vga adapter.
Click on the driver tab. Click on update driver. Select the Browse my computer for software method, and browse to the installation folder that was created when you ran the file.
That will be located in C:\SWSetup\sp34749. Make sure the Include Subfolders box is checked and the driver should install.
Upon reboot, you should have decent graphics but no Aero.
If you want to run all the graphics features of Windows 7, you will need to purchase a W7 capable PCIe x16 low profile video card that includes a low profile bracket that will work with the 245W P/S in your PC.

System & Chipset drivers for Mainboard MS-6743?

Hi,
I have recently purchased a new MSI Mainboard MS-6743 from ebay, but it did not include the System & chipset driver software.
I was told I could download the drivers from the MSI website, but when I search for MS-6743 it returns a result , item not found?

This chart states that it is an 865 GM2 board ( look for it under " micro Atx)
http://www.msi.com.tw/html/products/mainboard/mb_htm/mb_comparison.htm
But it does not have a hyperlink
It does look to be that all the 865 G boards use the same system and chipset drivers . Pick your board from this list and download
http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=1&NAME=Socket%20478%20(Intel%20P4)
( just be careful and double check to make sure that this is your board before you download and install )
Dave

Via Hyperion chipset drivers for K&t266 Pro2 MS 6380

hi all
Having recently re installed XP to new hard drive thought I should update the VIA chipset drivers so have installed 4in1 Hyperion 451v.
Am having some lock up problems transfering files from 1 hard drive to another on the same IDE channel.
Power supply problem identified and new Antec on the way.
Looking for some opions guidance around standard XP drivers vs Via and as this is quite old board should I be using retro Via drivers for stability.
Views, thoughts experience appreciated.

Some kt266 chipsets requires the VIA latency patch.
Fixes file transfer issues, corruption and stability issues.
Improves PCI bus transfer rates and crackling sound issues.
you might want to look into this.

Which Chipset Drivers for my MSI K9N6PGM2-V2 mobo?

Hi - I was over on the nVidia website looking for the latest chipset drivers and video drivers for my MSI K9N6PGM2-V2 motherboard. I am a bit confused about which chipset drivers and video drivers I should use. Here's the MSI link to my motherboard stats:
http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=1863
Question 1 - Can you provide a link to the nVidia website to the correct chipset drivers?
Question 2 - Can you provide a link to the nVidia website to the correct video drivers?
I am about to move my PC's components to a new tower, in addition to reformatting and partitioning my hard drive. I want to make sure I have the latest drivers.
Thanks
Joe

The latest drivers appear to be the ones on the MSI site here: http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1863
The only drivers I found on the nVidia website are much older: http://www.nvidia.com/object/nforce_nf4_winxp32_8.26_11.09.html

Help installing sata drivers for 870-G45

I just noticed Windows 7 64-bit lists my internal sata ii drive as ata in the device manager and also won't autodetect my e-sata usb drive when I connect it. I read that I need an AHCI driver. I have a 870-G45 mobo with AMD RX780 Northbridge and SB710 Southbridge.
So I went to the msi drivers page at http://www.msi.com/product/mb/870-G45.html#/?div=Driver&os=Win7%2064 and downloaded the driver package:
ATI System Drivers for 7xx/8xx/SB7xx/SB8xx Series (except RS690, 740).
When I unzip the downloaded file "ati_system_drive_mb.zip" I get a directory called "AMD" and inside is a program called "Setup.exe"
When I run Setup.exe it wants to install a program called "Catalyst". Is this correct? It says something about managing graphics but I don't have an AMD video card.
Do I have to run Catalyst? I can see some drivers in the folder AMD->Packages->Drivers->SBDrv->SB7xx->AHCI->W764A listed as:
amd_sata.inf
amd_sata.sys
amd_xata.sys
amd_sata.msi
Can I just install these somehow?
Thanks for any help you can offer.

ok, I can explain this better.
I have an internal sata ii drive and an external esata.
Both work but for the external drive when I turn it on I have to go to 'Disk Management" and rescan drives for win7 to pick it up.
Here is my Device Manager:
See both my drives show as ATA even though they are SATA. And I have only IDE controllers listed no SATA controller.
I am trying to get the system to recognize the drives as SATA and use the SATA controller to get better performance.
Also I am trying to install AHCI so that my external drive can be auto recognized.
The only thing in my BIOS regarding AHCI is under "Integrated Peripherals->On-Chip ATA Devices->RAID Mode->AHCI
I assume it needs to be set to AHCI.

Re: latest c216 chipset drivers for GE60 ?

Since you already seem to have the latest drivers available why are you being so ungrateful for someone trying to assist you? Get a grip on reality why don't you. One of these days you might have a real problem and with that attitude no one will bothe...

Quote from: Chike on Today at 21:43:11Time to remove the CPU (be careful) and inspect the socket for bent pins.
Taking a clear macro picture with good light is the easiest way to do it.
Do not install the MB insid...

MOVED: K9N Neo V3 Chipset Drivers for Windows 7

This topic has been moved to Windows 7.
https://forum-en.msi.com/index.php?topic=123975.0

i checked for usb legacy options. no such luck.
my next step will be to use the windows 7 sdk kit which comes with xperf, xperfview and xbootmgr. these tools should be able to assist me with doing a trace during the boot process.
however if my theory is correct.... the issue doesn't happen during the windows driver boot process but before....
so i will try to do a trace and see what it finds. but in any case, anyone have suggestions on how to do a bios memory dump? preferably while the system is still running or while it is frozen before the post screen.
i really really hate giving up on technical problems. my only other option is to either return the usb drive for warranty and hope i get a new drive with an updated firmware or buy a new usb drive...

Catalyst CCC and Chipset Drivers Collision

Hello All,
My CCC (catalyst control centre) wont load and I think its the chipset drivers and i cannot find the chipset drivers (amd 970 chipset and SB950).
The sequence of events unfolded as follows....
1) I downloaded ati chipset drivers (http://eu.msi.com/service/download/driver-2592.html) and installed them...
*This is the cause of everything?
*Because the drivers are NOT not 900 series chipset or mainboard?
As a consequence of this it kicked the Realtek LAN drivers out...
(something to do with hdmi audio drivers for the hdmi on the graphic card)
2) I reinstalled the realtek drivers
*As a consequence of this it kicked the catalyst ccc drivers out
3) I have tried 12 gazillion times to re-install the catalyst drivers and all attempts fail
I have removed the graphic drivers and reinstalled them again but the driver fails to install
I have tried the amd detection utility and that fails
I have tried the sapphire website ccc utility (12.2 and 12.1 and 11.2) and that fails
The reason for this I suspect is....
Because the chipset drivers are screwed up?
My system is :
mainboard-
MSI 970A-G45
graphic card-
ATI Radeon Sapphire HD6450 1Gb DDR3 (1xvga, 1xhdmi, 1xdvi)
memory-
Mushkin 8Gb Blackline
processor-
AMD FX4100
bios-
1.5
os-
windows vista 32bit sp2
I would assume that the correct route is to use an uninstall.inf to remove the chipset drivers?
if so...
where do i get the uninstall.inf?
if not...
where do i get the ORIGINAL or GENERIC AMD Chipset drivers for the 970a and sb950 chipset?
I dont want to re-install windows,
nor do i want to roll the system back.
Help anyone please?

Quote from: Panther57 on 27-March-12, 11:35:50
For some reason you link directed to 'Europe' MSI website? Unless you are in Europe.. visiting the USA North America site.. the link Wonkanoby listed is the US MSI download page for your board.
You didn't list the model number to your Mushkin memory.. are they compatible? The sound you are having trouble with... through your GPU or on-board plug in? If on the VideoCard through the HDMI.. dod you go into Control Panel/Sound, and make the selection for the correct 'Default'?
Hiya Panther57,
The Mushkin memory is BLACKLINE model 4x2gb
The graphic card is is in the first pcie slot (nearest cpu)
the audio is onboard Realtek 7.1
I have tried the AMD Autodetect and it takes about 20-30 minutes to install the ctalyst control centre which has FAILED on the last 12 or attempts,
I've benn having this problem for about thelast 10 days and try to address it towards the middle of the day most days by downlloading one or another driver....
I tried to reinstall from the cd but it fails and inside the CCC install package some options (the ones which matter in this case) are not selectable they are already checked and read as follows...
Your xxxxxxxxxxxx driver files re update/latest version and do not need updating.
Which I assume means it wont install those files.
Just a thought...
Wonder if its worth writing to the CCC team directly?
Thanks for any and all help.

Best and most stable VIA chipset drivers

Can anyone suggest which are the best VIA chipset drivers for the K8T Neo2 FISR mtoherboard (6702E)?
Live update syas 5.07A .... and that iswwhat I have at present ....
JLP

hello,
stuck with MSI drivers: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=608&kind=1

Need WXP drivers for my Equium A300D

Model number - PSAK2E - 001003KS
Serial - 58316186w
Hi all!
I have purchased a Equium A300D-13x today and I have taken Vista off of it and installed WXP home+SP2. All is not well! I am still in need of a few drivers, the machine runs on a AMD turion and I cannot find chipset drivers for it anywhere! Also its running a AMD graphics card, once again I cannot find compatible drivers for that.
The only chipset drivers available from what I saw was the Intel ones.
I hope you can help!

hi,
klick this link
http://computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
select
Notebook --> Satellite Pro --> Satellite Pro A Series --> Satellite Pro A300D --> PSAK1E --> Windows XP
here they are
cu

P35 chipset drivers

has any one any idea why i cant find chipset drivers for vista on this mobo at intel...if i search i can find the latest 9 series for xp pro but when i search for vista home premium it says no longer available..is because vista already has them...i think not because after instaling vista it evenualy says SOLVE PROBLEMS and yeh uou guessed it .it says smbus drivers needed and points to the intel site and automaticaly finds the right drivers to download

You can either go to: http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1212
or you can get them from the Intel website here: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=816&OSFullName=Windows+Vista*&lang=eng&strOSs=163&submit=Go%21
Psy

Z77MA-G45 clearance for large cpu heatsink?

Hi .
I am currently ordering parts to put together a quiet pc. I am looking at getting a Z77MA-G45 mbd but am worried that the heatsinks around the cpu area look tall so may restrict the use of a large cpu cooler. The CPU heatsink I am looking at is a 'scythe mugen 3.'
Can I assume that the Z77MA-G45 is a fairly standard design (heatsink wise) so the mugen 3 should fit without any clearance issues?
Thanks.
edit.... Quote from a Mugen review 'The distance between the lowest heatsink fin and the mainboard surface is 48 mm'
So I guess a simpler question is. How tall are the heatsinks around the cpu socket on a Z77MA-G45 please?

That cpu should fit fine. I have never used that paticular cooler but from the look of it: http://www.xbitlabs.com/articles/coolers/display/scythe-mugen-3_3.html#sect0
The mobo used in that picture has much larger heatsinks than the g45.

Chipset drivers for Z77MA-G45 i3-2120 cpu ?

Similar Messages

Maybe you are looking for