CHKDSK run on WD ext HDD - hang at Correcting errors in the Volume Bitmap - does it take very long?

Hi
As a background, my WD extHDD ( 1.5T) was working fine until today. When connect to PC, it cannot be reach but the drive letter (G:) appears and after awhile show CRC errors. The HDD cannot be access. After looking at some hep pages instructions, I
run the following at the CMD window : chkdsk G: /f /r. The CHKDSK runs through and did fixed some bad sectors .. and it when through stage 5 completed and after that it has the following message :
Free space verification is complete.
Adding 10 bad clusters to the Bad Clusters File.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Correcting errors in the Volume Bitmap.
It is still "running" for over 12 hours now.. I am not sure if I need to stop it ( reboot?) or continue to wait for a status change ?!!
Please help !!!
st99my
The complete details of the CHKDSK run is below :
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\test888>chkdisk G: /f /r
'chkdisk' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\test888>chkdsk G: /f /r
The type of the file system is NTFS.
Volume label is Elements.
Stage 1: Examining basic file system structure ...
50432 file records processed.
File verification completed.
0 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
58276 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
3923 data files processed.
CHKDSK is verifying Usn Journal...
10905608 USN bytes processed.
Usn Journal verification completed.
Stage 4: Looking for bad clusters in user file data ...
Windows replaced bad clusters in file 43621
of name \PERSON~1\audio\PCSTUD~1.ZIP.
Windows replaced bad clusters in file 43773
of name \PERSON~1\audio\AUDIO-~1\JACKTR~3.MP3.
Windows replaced bad clusters in file 43783
of name \PERSON~1\audio\AUDIO-~1\JE4C19~1.MP3.
Windows replaced bad clusters in file 43785
of name \PERSON~1\audio\AUDIO-~1\JE4BE5~1.MP3.
Windows replaced bad clusters in file 43788
of name \PERSON~1\audio\AUDIO-~1\JEC96B~1.MP3.
Windows replaced bad clusters in file 43953
of name \PERSON~1\audio\AUDIO-~1\NY1477~1.MP3.
Windows replaced bad clusters in file 44981
of name \PERSON~1\audio\THRUTH~1.VER\NEWTES~1\40_MAT~1\40096M~1.MP3.
Windows replaced bad clusters in file 45777
of name \PERSON~1\audio\THRUTH~1.VER\NEWTES~1\46_1CO~1\460291~1.MP3.
Windows replaced bad clusters in file 45866
of name \PERSON~1\audio\THRUTH~1.VER\NEWTES~1\47_2CO~1\470172~1.MP3.
50416 files processed.
File data verification completed.
Stage 5: Looking for bad, free clusters ...
419430987 free clusters processed.
Free space verification is complete.
Adding 10 bad clusters to the Bad Clusters File.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Correcting errors in the Volume Bitmap.

1. Backup most important files to another device or cloud
2. Use diagnostics tool(s) from WD
http://support.wdc.com/product/download.asp
3. Send log to WD support and consider replacement of external HDD. If warrancy applies send HDD to WD directly.
Rgds
Milos
PS: Reseller and vendor warracies may differ (5 to 2 years in my case)

Similar Messages

Portege R100: FDISK and HDD format takes very long time

I have Portege R100 and when I tried to run FDISK it take very long time to Create a DOS partion.
After running FDISK I tried to do FORMAT the HD and is taking more than 6 hours to Format hard drive.
After Format I tried to Load Win XP but it system just hanged with message Loading files...
Could some one hep me out

it's a known problem that FDisk cannot cope with the 1.8" hd in your R100
Use the method described in this thread and you will succeed :
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232

Query takes very long time and analyze table hangs

Hi
One of the oracle query taking very long time (ie more than a day) and affecting business requirment of getting the report in time.
I tried to analyze the table with compute statistics option, however it hangs/runs forever on one of the huge table?
Please let me know how to troubleshoot this issue

Hi,
What's your Oracle version?
You should use DBMS_STATS package not ANALYZE..
Regards,

Want to run a BDC even if there is an error in the TCode

Hi,
In one of the screens in my BDC an error comes (this happens when that transaction is run from command prompt in foreground also). But in the actual transaction after the user sees the error, he is able to continue changing the fields on the screen and post it. However in BDC, as soon as the error comes, the BDC exits and comes back. I would like it to continue, just the way it does during the manual entry, is there a way I can do this?
The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC. I also tried using function module L_TO_CREATE_POSTING_CHANGE, but it gives the same error as the screen
FORM create_to USING r_mblnr TYPE mblnr
                     r_to_lgort TYPE lgort_d
                     r_sto_bin TYPE lgpla
               CHANGING rt_bapi_message TYPE type_t_bapi_message
                        r_success TYPE c.
DATA: v_mode TYPE c,
        wa_bapi_message TYPE bdcmsgcoll.
CLEAR s_bdcdata.
REFRESH t_bdcdata.
PERFORM bdc_dynpro      USING 'SAPML02B' '0203'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RL02B-MBLNR'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'RL02B-MBLNR'
                                r_mblnr.
PERFORM bdc_field       USING 'RL02B-MJAHR'
                               '2009'.
PERFORM bdc_field       USING 'RL02B-DUNKL'
                                'H'.
PERFORM bdc_dynpro      USING 'SAPML03T' '0102'.
PERFORM bdc_field       USING 'LTAP-NLTYP'
                                r_to_lgort.
PERFORM bdc_field       USING 'LTAP-NLBER'
                                '001'.        "destn storage section
PERFORM bdc_field       USING 'LTAP-NLPLA'
                                r_sto_bin.        "destn storage section
v_mode = 'N'.
CALL TRANSACTION 'LT06'
                   USING t_bdcdata
                   MODE   v_mode
                   UPDATE 'S'
                   MESSAGES INTO t_messtab.
IF sy-subrc <> 0.
IF sy-subrc = 0.
    LOOP AT t_messtab INTO wa_bapi_message.
      APPEND wa_bapi_message TO rt_bapi_message.
      EXIT.
   MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
     WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
    ENDLOOP.
ELSE.
    LOOP AT t_messtab INTO wa_bapi_message.
   MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
     WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
      APPEND wa_bapi_message TO rt_bapi_message.
    ENDLOOP.
   APPEND t_messtab to rt_bapi_message.
ENDIF.
COMMIT WORK AND WAIT.
ENDFORM.                    "create_to
Thanks for reading

Hi ,
Now as per the transaction an error is prompted only when the compiler interprets it as false on a data field or a combination of them . Now its in the programmers hand to validate the data before submitting it to the screen .. now this validation should cover all scenario's . One point i want to make here is that bdc is nothing but replaying how the user enter's manually for no of records..
i dont know about this tcode LT06 .
//The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC.//
you are entering the material doc no in screen 0203 ..use all screen mode and check what is the error prompting if any and in the normal debugging track that error if some user exit is written using sy-binpt with some error message..
did you tried some relavant tcode other than LT06 which can be used for this purpose cause sometimes we have alternate tcodes to run the bdc .. please check on this .
Br,
Vijay.

KE30 Report:-Takes very long time and ends in a Run time error

Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin Tiwari

HI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari

Select statement takes very long to run with order by clause.

Hi all,
I have a select statement which when I run without the order by clause takes arround 2 minutes to run. But with the order by clause it goes on for ever. I am trying to access the database server through a network which is not too fast.
The select statement is based on 9 views which are again based on some views. It also has inline views and outer joins. These views and inline views can not be done away with.
When selected without the order by clause it gives 3215 records.
Anything like 2 to 3 minutes will be Ok.
Thanks.
--Malay

The select statement is as follows :-
SELECT f.system_name,
a.signal_type,
f.sys_signal_name,
a.bus_desc,
b.vl_ident,
b.vl_name,
b.src_mac,
b.src_mac_addr,
b.dest_mac,
b.dest_mac_addr,
b.network,
bb.bufr_size_in_bytes,
bb.bag_in_ms,
bb.is_rma_used,
bb.is_ic_used,
bb.sub_vl_cnt,
bb.skew_max_in_ns,
cc.msg_name,
c.src_ip,
c.src_ip_addr,
c.src_port,
c.dest_ip,
c.dest_ip_addr,
c.dest_port,
cc.rate_in_ms,
cc.tx_mode,
cc.protocol,
cc.port_type,
cc.msg_length_in_bytes,
d.mnemonic,
d.start_addr32,
d.lsb,
d.end_addr32,
d.msb,
d.format,
d.init_value,
d.fs_mnemonic,
d.fs_afdx_data_id,
d.digital_data_id,
DECODE(
d.digital_datatype,
NULL, '',
'UNUSED', '',
api$util.concat_column_data(
'api_'
|| d.digital_datatype,
'digital_data_id',
d.digital_data_id,
bool.FALSE
) AS data_details,
f.connection_id
|| '_'
|| a.digital_bus_id
|| '_'
|| b.afdx_vl_id
|| '_'
|| bb.afdx_output_id
|| '_'
|| c.afdx_frame_id
|| '_'
|| cc.afdx_msg_id
|| '_'
|| d.afdx_data_id AS KEY
FROM api_afdx a,
api_afdx_vl b,
api_afdx_output bb,
api_afdx_frame c,
api_afdx_msg cc,
api_afdx_data d,
vf_signal e,
(SELECT DISTINCT aa.signal_id,
cc.system_name,
bb.connection_id,
bb.sys_signal_name
FROM vf_nodes aa,
vf_connections bb,
vf_system cc
WHERE aa.connection_id = bb.connection_id
AND bb.system_id = cc.system_id) f
WHERE e.signal_id = f.signal_id(+)
AND e.digital_bus_id = a.digital_bus_id
               AND a.digital_bus_id = bb.digital_bus_id(+)
AND bb.afdx_output_id = b.afdx_output_id(+)
               AND b.afdx_vl_id = c.afdx_vl_id(+)
AND bb.afdx_output_id = cc.afdx_output_id(+)
AND cc.afdx_msg_id = d.afdx_msg_id(+)
ORDER BY f.system_name,
a.signal_type,
f.sys_signal_name,
b.vl_name,
cc.msg_name,
d.start_addr32,
d.lsb;
Where api_afdx ,
api_afdx_vl ,
api_afdx_output ,
api_afdx_frame ,
api_afdx_msg ,
api_afdx_data ,
vf_signal ,
vf_nodes ,
vf_connections ,
vf_system
are all views.

When I try to run applications on my domain controller, I get error message, "The service cannot access control messages at this time."

My domain controller is Windows Services 2008 R2. I get this error message when trying to open Active Directory, Group Policy, services, etc. We had this problem previously. Rebooted the server and it worked for awhile, but the problem
has reoccurred.

I would agree with others. Installing recent updates might solve the issue. Also, checking the errors in event viewer might help.
Have you tried to reboot the server? If no, you can start with that.
If none of the propositions helped, you can consider doing the following if you have at least one additional DC/DNS/GC server:
Run netdom query fsmo to identify the FSMO roles that the faulty DC is holding
Transfer FSMO roles that the faulty DC is holding to another healthy DC
Demote the faulty DC (If you are unable to do it, you can consider running
dcpromo /forceremoval and running a metadata cleanup)
Re-install the OS of the faulty DC and install the recent updates
Promote the re-installed server as a DC/DNS/GC server
Of course, you need to consider taking system state backups before proceeding.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Error message-the volume unkown is about to run out of disk space.

When I try to log and transfer any of my video clips from my camera it doesn't work, because in the middle of the transfer it comes up with a message saying volume unknown is about to run out of disk space, please clear some space and hit continue...This shouldn't be, because I have more than enough room on my mac. So I'm wondering what, if anything do I need to delete. And what else I have to do so I can get back to successfully transfering my clips. Thanks alot!

Are you capturing to the internal boot/system drive of your computer?
Also, how much remaining free space do you have on the drive you have set as the media or scratch disc?

Visual studio lightswitch takes very long time (hangs for 20 sec) when changing entities properties in screen design

hi, I have lightswitch project that is growing up every day. Now it has 200 database table and about 450 default screens. When I first started the lightswitch project with few tables
(about 50 tables), it responses very fast. Gradually when I created the screens, the response takes 10 seconds for any changes I made in the screens or on the tables (*.lsml). Now, it takes 20 seconds (-+2 sec) to be able to do the next change!. For example,
changing the group name, entity input type, width, table summary property ,arrange fields in the groups, change display name (which I change the most),,etc. Just imaging that I can change 3 things on a minute! I am using lightswitch with VB coding , but no
programing codes (yet), I uses only HTML screens, no extensions, connected with SQL express 2012 (but I think that has nothing to do with the slowness since the problem is on the screens design time), I have created the project from scratch three times, with
visual studio 2013 ultimate update 3, update 4, and now with Update 5 CTP 1 !! Yet, the same result. Strange that the freezing time is always about 20 seconds!! Any idea why this is happening? Any resolution?! Regards, Hasan

Hi Michael
again i appreciate your answer ...
i was trying to implement your suggested workaround of my problem, unfortunately, it won't work with me ! i cannot split the
project to smaller modules because of:
all screens are connected to each other's with buttons and clicks (view selected)
i have changed all the "display names" of tables fields (translation). i would have problem in translation whenever i
need to add tables or fields in the database, then i need to repeat that for all modules. i know that i can use other translation method, but i have already translated thousands of words !
i have spent 2 months in 2013 to learn MVC, but i did not like it. it is somehow complex for me. i am a volunteer developer (actually i
am network designer ).
i may lose the authentication , as i need to log-in to each module separately.
is there any root solution to this problem ; the VS Lightswitch (or IDE) slowness when there
is a lot of screens? maybe in VS2015?
i had great hopes for the lightswitch, and still it is the only IDE that i can use for the "Charity
ERP" project.
regards,
Hasan

Hi, I am running the latest version of Firefox and at times it fails to connect to the internet. This is a intermittent problem. It also (sometimes) take very long to open after I open Firefox?

Firefox does not always connect to the internet or is very slow to open. It is not with specific sites and when it does happen I have to either wait or shut down and restart the computer. It does not happen with my other browsers. (Google chrome)

I have been having the same problem, it's as if Firefox's internet connection is broken at intermittent intervals. I tried disabling all my plugins, creating a new profile, everything on the page below and even updated to version 8, but nothing helped. I think it's been happening for a weeks or so, maybe since an update(?) but it seemed a lot worse today. It's not my connection as I've been using Chrome as an alternative which works fine. I have not tried rebooting my machine.
http://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

Partition Ext HDD without losing the data already on the disc

I have an early G5 iMac 80gb HDD, Macbook and a Macmini
I have finally managed to get them all running the same version of ilife(08) and thought it was time to get them all running from the same hymn sheet...
I have been using a 500gb Ext HDD (iphoto,itunes etc) so i have filled around 300GB so far, the problem is I want to move my iMovie events/projects to the ext HDD to. I have followed the steps to move the files but I get a dialogue box telling me my drive isn't compatible with imovie. (iMovie 08)
When I check the Ext HDD format (using <apple>+i it tells me the format is appleshare...
So after that intro..... can I partition this drive and set aside say 100GB (178GB free) without losing the data on the drive??
Thank you for reading
Chris

Appleshare? That is not a format.
It must be formatted as Mac OS Extended (Journaled) if not already. Reformatting will delete everything on the disk.
How to partition a Hard Drive:
http://www.kenstone.net/fcphomepage/partitioningtiger.html

Airport Extreme freezing when accessing ext HDD

My Airport Extreme keeps dropping the connections when I try to access files on the WD 3TB external HDD connected in the USB port.
I am able to connect to the internet at all times using either a newly purchased 2012 Mackbook Pro, iPad, iPhone or Windows 7 laptop. But when I try to access my files on the ext HDD, it works 1/10 of the time. I am able to access the drive and partitions, but when I select files, mostly movies (avi & mp4), it will more often then none freeze up and drop the network/internet connection. It will then indicate in the Airport utility that the Airport Extreme is no longer in range and there is no more internet until I disconnect the power from the Airport Extreme, wait a few seconds and reconnect the power. 3 minutes later the Airport Extreme is back on-line and Internet and network are restored. I have had to do this more then 8 times this morning alone.
The Airport Extreme is currently using firmware 7.6.1.
Saw many posts dating back to 2008 and have tried changing configs to recommendations, but nothing is working.
Not sure what to do to correct this, need help.

Lebruny,
Did you happen to find the cause of the freez up of you AE?.
I have mine connected to a WD 2TB, and when I heavily access the drive, I encounter the same problem you described.
Thanks,
Daddu

Mac os ext hdd icon no show in desktop

How to show ext hdd icon in desktop. i tried to Finder>Preferences>General and look for the 'New Finder Windows Show:' option, and choose 'All my Files'. The icon still no show. I need to Applications->Utilities->Disk Utility to open my ext HDD.
Can you help me to solve the problem.
Thank you very much for your help.

Hi lllaass,
Disk Utility will show the ext hdd. But, Ext Hdd icon will not show when i connect ext hdd to Mac computer.
Before, i tried use below command to enable mac ntfs. It will effect mac system. So, it will not show ext hdd icon on desktop?
iskutil info /Volumes/abc | grep UUID
echo “UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX none ntfs rw,auto,nobrowse” | sudo tee -a /etc/fstab
If i use these command. How to cancel to make ext hdd icon show on desktop?
Thank you very much for much.

Backup to Ext HDD

HI,
Am on 11.5.10.2
RDBMS 9i
OS RHEL 4.6
Server HP Blade server
we planned to take b`ackup to external hdd.
I mounted the ext hdd on /media/usbdisk
I taken the backup of Database.
But wen i try to take the backup of Application.. am not aber to see the content of EXT HDD(means DB Backup)..
CAn anybody tell me y???
Thanks...

HI,
Please any body help me..
Am trying to take backup to the USB EXT HDD.
Wen i Connected to Server.. it is automatically getting mounted in the /media/usbdisk
#fdisk -l
Disk /dev/sdc: 500.1 GB, 500107837440 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 60801 488384001 c W95 FAT32 (LBA)
Wen i try to open it from GUI.. Means
1. Computer
3.External HDD
its showing mount error...
its already mouted on /media/usbdisk
I took the backup to this mount point...
Wen i try umount
[root@hostname1 usbdisk]# umount -lfr /dev/sdc1
umount: /dev/sdc1: not mounted
[root@hostname1 usbdisk]# umount -lfr /media/usbdisk/
umount: /media/usbdisk/: not mounted
[root@hostname1 usbdisk]# ls
bprodata.tar.gz bproddb.tar.gz
[root@*hostname1*1 usbdisk]#
[applmgr@*hostname2*2 usbdisk]$ ls -lsrt
total 10950784
2968500 -rw-r--r-- 1 root root 3036769327 Apr 29 18:46 prodora.tar.gz
2093764 -rw-r--r-- 1 root root 2141916410 Apr 29 18:51 prodcomn.tar.gz
5888520 -rw-r--r-- 1 root root 6023946204 Apr 29 19:09 prodappl.tar.gz
[applmgr@hostname2 usbdisk]$
here am noy able to find hostname1 data????
plz help me somebody....
Thanks.
Edited by: user13025265 on May 2, 2010 4:26 AM
Edited by: user13025265 on May 2, 2010 4:26 AM

MacBook Pro takes a long time to start up or hangs at gray apple logo after minor fall

I upgraded to Mavericks a few days ago. Everything was working fine until yesterday, when my MacBook Pro started taking a really long time to start up or restart.
Before upgrading I had some directory problems which I fixed with DiskWarrior. I then upgraded to Mavericks. There was also a fall that I took, which resulted in the MacBook Pro hitting on one corner and getting a minor dent (It was inside a padded messenger bag when I fell). It worked fine for a whole day, but the next day it started slowing down and getting stuck.
I run DiskWarrior again and there was more directory problems, which were fixed again. When I start the MacBook Pro from an external HD with Mac OS X 10.8, there is no delay in starting up. When I switch to the internal HD, then I get very long delays (5-10min) or hangs at the gray apple logo screen.
DiskUtility did not report any problems, neither did SMART report.
Could it be that the HD got somewhat damaged and gets stuck intermittently? Is it possible to start up OK some times and others to get stuck?
How can I check the HD? Shouldn't the SMART report indicate a problem?
Any help would be greatly appreciated as this is my main work computer!
Chris

I think that my Mac was shutdown when it fell, but I am not 100% sure.
I did perform both SMC and PRAM resets. I will also try to run maintenance scripts. Thanks for the suggestion.
It keeps on taking around 10min to restart now, but it has not frozen yet.
The other very strange thing that happens (and this was the first sign I had when it started acting up) is that Mail.app cannot connect to my IMAP servers (a host provider and Google), even though my Mac connects to the internet. I have the MacBook Pro on the same ethernet network as my home iMac, and I get mail without a problem on the iMac! So something is blocking the mail on the MacBook Pro.
This happened for the first time on Friday and after that I kept having the long delays in startup or freezes I mentioned before.
Could those two be connected?
When I use an external HD as as start up I can get mail fine.

CHKDSK run on WD ext HDD - hang at Correcting errors in the Volume Bitmap - does it take very long?

Similar Messages

Maybe you are looking for