Chnage G/L account in PM Order Item

Does anyone know how to change Plant maintenance order line item G/L account, when doing the item reservation.
When we do manual reservation using MB21 we can assign the G/L account for specific item. But when we use PM order facility to material reservation its not possible to change G/L account of specific item.
Please give your solutions on this issue....
Reg,
K

Hello K
If I understand your query correctly, then it is not possible in standard. the G/L information is transfered from PM side and not possible to modify it from MM transactions.

Similar Messages

PO Account assignment F(Order) with item category D(service

Hi Gurus,
I have created Po with with account assignment F (Order) & item category D (Service).But when i am going to change the Order number in account assgnment tab .It is not in editable mode, it is not indisable mode .So how it will come into editable mode. .what configuration setting i have do please help me sir.
Thanks in advance.
Regards,
Kirti

>
kirtiratna tabhane wrote:
> Hi kishor,
>
> We are not crating the PR w.r .to any order in that case can we change .How.But why we can not directly change into PO.If i am Creating thr PO with Acc *** F (order ) for material.inn that case it comes in editable mode.please help me.
>
> Regards,
> Kirti
Hi Kirti,
yes, if you create the PO using transaction ME21N, or ME21, then you should be able to change it. Unless the PO has already been closed, or deleted, or the goods received has been carried out for the PO. Then you cannot change it.
You can check the PO status, if the gr has been carried out, there should be a PO history tab in the item level.
If the PO is closed, or deleted, there should be a trash bin icon next to the item in the overview.
If the PO is created with reference to order (F), then in account assignment tab, there should be an order number. In this case, then you need to trace back to the RF, delete it, then change the data in the order, create another RF, then you account assignment in PO will be corrected.
Hope this helps.
Regards,
Anisah

Unable to post to consumption account in sales order creation

Dear Members:
It's a struggle for a while, that I am getting error - "not possible to determine consumption account" , "the system was not able to determine a consumption account for purchase order item with acc assignment" and suggresting to address "GBB" posting key- while creating sales order in VA01.
This is when generating sales order for make-to-order BOM item with header-item item categories as TAQ-TAE with sched. line "CS" attached to TAE (forcing it to generate purchase requisition). Also I have GL accounts entered for GBB posting key in AUF/BSA/VKA.
Could someone please give clue where I am going wrong - appreciate very much.
Thanks
Atanu

I had also faced the same problem.Please do the following,
Logistics - General> Material Master> Basic Settings> Material Types> Define Attributes of Material Types
You will reach to this screen
Select the Material type and check for the Quantity /value update for the material type.
I maen here you should put tick mark infront of your plant.
I hope this will help you.
Regards,
Shrikant

Sales Order/Item as Account Assignment in Accounting Doc.

I have a scenario where we are selling some services. Process is to create sales order --> Create billing document in reference to sales order & then release it to accounting. I am using materials of type DIEN( service) for the purpose and have customized the sales order / item category. Process is working fine till creation of accounting document but the accounting document is missing sales order/item in it [as account assignment]. I am not sure what config I am missing.
Attached file shows where I am expecting the sales order / item to be seen.
Please provide hints on this.
Thanks in advance.
Sonal

Hi Sonal
If you want the billing doc to post in the sales order as cost object, then your GL has to be cost element and the account assignment category in Sales order must be E
Check the Requiremebt Type in the Procurement tab of sales order.
This RT is assigned to a Requirement Class and the RC is mapped to Acct Assgn Catg.
Spro - Cost object controlling - prod cost by sales order - control of sales order related.....
In this node you can see which RC is assigned to RT
Br. Ajay M

G/L Account is missing in item data in sales order with reference to quotation

Dear SAP Guru,
I have a problem in accordance with G/L Account missing sales order. Initially, please find the below lines.
1. If I do the sales order without reference to quotation there is no error in G/L Account missing.
2. If I do the sales order with reference to quotation there is an error that G/L account is missing in item data.
I have checked the VKOA, the settings are fine.
Kindly anyone of you resolve this issue.
Warm Regards
Vidya Sagar

G/L account is missing in item data.
Many times, it has been discussed on this issue in SCN and please search with the same text so that you will find many threads asking various areas to check. Take the inputs from there and post here still if you have issue.
G. Lakshmipathi

New contract account for every line item in subscription order....

Hi Guys,
I am having a problem with the subscription order.
Whenever I change the subscription order and add a line item to it, SAP by default creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
Can you suggest me any solution for this problem?
Thanks in advance...
Regards,
Abhay

Hello Abhay,
This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
We had a similar requirement and an enhancement was developed per specifications.
Regards,

In ME21N error-Purchase order item still contains faulty account assignment

Hi
While creating the PO in ME21N the following error occurs.
"Purchase order item 00010 still contains faulty account assignments"

Hi,
Details you have provided for account assignment in item detail is not faulty or not sufficient.
If you are charging PO to a cost center, check for cost center and GL account.
If you are charging PO to network....check for GL account, network and activity.
sk.

"Purchase Order item 00010 still contains faulty account assignment items"

Dear Gurus,
Good Morning and have a nice week ahead. One of our users encountered the following error in SRM(front end) when try to approve the shopping cart.
"MEPO 046 : Purchase Order item 00010 still contains faulty account assignment items"
As per my investigation, this specific error appears when shopping cart is created for a particular cost center only. when i ordered the similar material for different cost center, I did not encounter this error.
Your valuable inputs pls. Any OSS messages???
Pls help..
Best Regards
Thamarai Kannan MK

Hi
See these SAP OSS Notes which will definitely help ->
Which SRM version are you using ?
Note 990946 - BBPSC01: Accounting error during PO creation
Related Notes
Note 1000184 - Account assignment error when document transfer to back end
Do let me know.
Regards
- Atul

Restrict Ordered Items Sold to an Account

Hi,
Is there a way to restrict item/s that can be ordered for a particular account ? Also can the restriction be placed on the no of items that can be sold to an account on an order ?
Consider 11i and R12 versions.
If not available out of box then any recommendations on the best approach for satisfying this requirement would be appreciated.
Thanks

That's an unusual requirement - more often you want to restrict the maximum order value which you can do via credit management.
I'll be interested to see if anyone has a better suggestion but one possibility would be to do this via pricing setup as a workaround - if you want to restrict the customer to 100 max qty of items A, B and C, set up price breaks for those item/customer combinations with a range of 1 to 100.
That will mean that if you try to sell 101 of one of those items to your customer, you'll get a pricelist failure. The downside of this is obviously that your CSRs won't get a more helpful message along the lines of 'max ord qty to this customer exceeded'. If you can't live with that, one other option would be to do the same setup on an inactive modifier list and write a forms personalization to check this customer/item matrix ... reporting an error/warning message if the max pricebreak qty on the inactive list is exceeded.
Regards,
Jon

Table Name to take report of Open Sales Order items&its relevant GL Number.

Hi,
I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
Any pointers on this will be appreciable.
Rgds,

Hi
There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But by creating your own report using LIS then it is possible
Regards
Srinath

In MR11 - u201CNo (suitable) purchase order/item found     u201C.

Hi Friends,
We are having issue with MR11 in 4.6 B. While doing MR11 for a PO where Delivery costs have not been balanced, we are getting message u201CNo (suitable) purchase order/item found     u201C.
In the research, we found that in 4.6 B, MR11 is using program SAPMM08K, where as in ECC 6.00, it is using program SAPRCKM_MR11.
Initial fetch from PO history table :
4.6 B -> In 4.6 B we are using EKBI view (Join via EKKO / EKPO / EKBE for MR11) to fetch the PO history table. (It is not considering EKBZ table for delivery cost records)
Program is checking the Quantity of EKBI, if there is no difference in quantity then it is coming out of loop and showing message
No (suitable) purchase order/item found
    Message no. M8 401
3CAUSE&
    No purchase order exists which corresponds to your entry for a quantity
    difference posting.
ECC 6 -> In ECC 6.00 we are using view V_CKMLGRIR (DB View: Selection for MR11 Clearing GR/IR Clearing Account Table u2013 EKKO, EKPO and EKBE)
Here also program is checking the Quantity in the View, if there is no difference in quantity then it is going for another fetch (which is missing in 4.6 B).
In the another fetch, it is checking View V_CKMLGRIR_FR (DB View: Selection for MR11 Clearing Freight Clearing Accnt Table u2013 EKKO, EKPO and EKBZ)
I've searched sap notes but couldn't find much help. I've tried different search criteria but no luck. Could anyone able to help me?
Thanks,
Ramesh S

HI
MR11 will show only the blocked invoices due to quantity/price difference.
First of all please check your invoice (MIRO of your required PO) that it is blocked for invoice verification or not .(Please note block for payment is not relevant for MR11).
Further please check if you have mainatined any tolerance in GRN (MIGO) for under or over delivery , so it is not escaping the PO due to under/over tolerance limit.
Cheers
Mukta

Missing CO Sales Order Item in 643 Cross Company Movement

Hi all,
we are working in a make-to-order scenario in which the company A/plant A sells a finished product produced by company B/plant B.
The sales order item is a cost object (account assignment category E – “Ind. cust. w. KD-CO” is set in the requirement class in use) and is derived into the Transfer Order (Account Assignment tab) from production company B/plant B to selling company A/plant A.
When we try to transfer the finished product from plant B to plant A by means of 643 movement the system provides error message KI 235 – Account xxx requires an assignment to a CO object where xxx is the Cost Of Goods Sold for company B. This is due to the fact that FI is not able to derive the sales order item as a posting cost object.
We have activated cross company CO objects by deactivating the Company Code Validation indicator (field TKA00-RKBUK) for controlling area settings.
Any suggestions?
Thanks in advance.
PierGiorgio

Hi Abhi,
yes it is: "E" is the entry value in the field consumption of the requirement class involved.
Thanks, PierGiorgio

Mandatory partner function at sales order item level

Hi all,
I'm customizing partner schema at item level for sales order. I have created a custom partner function, I put it in a new sales order item partner procedure and i set this partner function as mandatory (I want that system show me a message if this function is missing at item level in sales order). This partner function is defined only at sales order item level (not at header level or customer master).
If i create and save a sales order with an item type that use the item partner procedure I have created, system don't show me any message for the item custom partner function missing, else if it is set as mandatory in sales order item partner procedure.
I have read some posts in these forums about this functionality, but it seems a different situation.
Someone had a similar type of problem?
Thank you in advance for any possible suggestion.
Regards
Gianpaolo

Hi,
First you have to create a new partner function.
Then assign that partner function to the account group.
Then assign that partner function to partner determination procedure for the item category.
Over here click on the mandatory button also.
Then assign that partner determination procedure to item category.
Then to XD02 and give your customer number and in the partner tab maintain the data for that partner function.
Now go to VA01 and create your sales order you will see you partner function.
If you wont have maintained it in the customer master then it will prompt an error.
Regards
Raj.

No account is specified in item 0000001037

Dear Gurus,
Sales return is being performed. During Accounting posting for Credit memo, we are getting this error..
I have checked VKOA Settings. Material Acc posting., Customer Acc posting.
In Billing document, Revenue acc analysis.. GL account has been properly triggered. Still getting the error in Accounting Type 'S'
in OB52 Posting period is open.
We are getting the following error:
No account is specified in item 0000001037
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000001037" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000001037" of the FI/CO document.
I have checked Transfer document Settings for RV, i cannot find what is 'item 1037'. But i understand in 1037, 10 is line item no.
Please through some light
Regards
Praveen

Dear,
Please check whether have the Account Assignment Group been input in the Customer Master (Billing tabstrips - Accounting sections - Field name: Acct assgmt group).
The Account Assignment Group will be copied automatically into the sales order. Check whether the sales order (VA03 - Goto - Header - Financial Accounting - Field name: AcctAssgGr) have been filled in automatically.
Check whether the billing document (VF03 - Goto - Header - Header - Field name: AcctAssgGr) have been filled in automatically.
If the customer master have not been maintained and the user have already input the sales order, then the user will have to maintained the Account Assignment Group manually either in the sales order or the billing documents.
Take note for One Time Customer, the user have to input the Account Assignment Group manually into the sales order. One Time Customer can be used by many customer, therefore, the system will not be able to determine the Account Assignment Group manually
Check whether the configuration in transaction VKOA have been done correctly
Regards
AJIT K SINGH

Sales order costing - tracking of actual costs at sales order item level

Hi
We are going with sales order costing for services
Service material is non-valuated hence the scenario is non-valuated sales order stock
PP module is not implemented.
I am having following questions
1. How to track the actual costs at sales order item level? Is Internal order/CO production order is required to be created for the same?
2. Can I do activity confirmations directly from cost center to sales order item.
3. Can Raw material is issued directly against sales order item.
4. Is Sales order is a real or statistical account assignment object?

dear friend,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/42/d7248ab27111d19e9a080009b0db33/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/90/ba6cfb446711d189420000e829fbbd/frameset.htm
reagrds,

Chnage G/L account in PM Order Item

Similar Messages

Maybe you are looking for