Chnages in Service PR after Creation of PO

Hello,
I have created a Service Purchase requisition with service no & then Purchase Requisition has been converted to PO.
Now I want to chnage the Serice Qty PR ( to increase), but it is in disable mode , system is not allowing to do any changes...
Can you please provide me the solution ............
Regards,
Raghunath Bal

Hi
We cant able to change the Qty in serivce PR once you saved it (like material PR ). You can delete the line item and then create a new one .
regards
Anand

Similar Messages

How to trigger an SMS after creation of Activity / Interaction Record

Dear Experts,
Our Client requirement is to trigger an SMS immediately after creation of an Interaction Record. I want to define an Action for this.
But what processing type should I use for SMS, (like Method Call, Smart Forms Mail / Fax / Print and Workflow). We are using an external service provider domain to send SMS to our customers. It has been configured in SCOT.
But from CRM configuration front there is no specific processing type for SMS. then how system reads telephone number from the BP master.
Kindly help me to resolve the issue, your suggestions will be highly appreciated.
Best regards
Raghu ram

Raghu,
In your case you could copy a "print" action method class and create a z-version. Then modify the print action method so that the smartform output triggers a call to your output type.
Or you could just code a new method that creates a new BCS send request using the CL_BCS document and your output type.
It just depends on how whether you want to use smartforms to build the message or build it in some other method.
Take care,
Stephen

Delegate Calendar Entries disappear seconds after creation

Environment.
Exchange 2010 on prem. Office 2013. CEO and COO have the same Executive Assistant. This person has Manage Full Access Permissions for both CEO and COO.
She regularly adds calendar events to either persons calendar without issue for the past 5 months since she started. Until today. Now, on either calendar, as soon as she creates a Meeting or Appointment, it disappears after 3-10 seconds.
Ran the repair process on Office. Same issue. Removed the Manage Full from both accounts and added it back. Same issue. Had both CEO and COO manually give her delegate access through Outlook. Same issue.
Any suggestions would be much appreciated.
Thanks.

I was faced with the exact similar problem of my COO sharing her calendar with 2 admin assistants whereby one of them was having issues updating
the calendar as they would vanish within 20-25 seconds after creation whereas the other assistant was successfully able to do so without any problems even though she was also on cached mode.
After banging our heads with zillion’s of tests of profile, online mode, offline mode, new profiles, New Laptop, New Configuration, Active Sync
devices such as Apple, BB, Androids and going through lot of hue and cry on forums, I opened up a call with Microsoft and they pointed me to Exchange 2010 registry entries which eventually did the job. I would only like to summarize my solution which is:
Refer to
http://technet.microsoft.com/en-us/library/ff477612(v=exchg.141).aspx
for default values which will be altered in the solution.
Event ID 9646 was being logged under my application event
viewer indicating the following error
Mapi session “ “ exceeded the maximum of 500 objects of type "objtFolder".
RESOLUTION:
To resolve this issue, you simply need to create the following registry keys on each of your mailbox servers.
Navigate to HKLM > System > CurrentControlSet > Services > MSExchangeIS > ParametersSystem. Create a new key in ParametersSystem
named MaxObjsPerMapiSession. In MaxObjsPerMapiSession, create a DWORD named
objtFolder with a decimal value of 600.
Please note that the DWORD keys should have the same upper and lower case combination therefore copy it from the article above and paste
in your registry.
The Information Store will pick up these changes after a few minutes; you do not need to restart the Information Store service. If you continue
to see this error, only this time specifying that the user has exceeded the new 600 object threshold, increase the value of each DWORD by 100 until the errors stop.
Similarly, you can see Event ID 9646 indicating other objects also being exceeded as per the above Tech Note and similarly registry entries need
to be keyed in resolve the issue.
You will also have to see the user side Sync Issue logs under outlook as they keep indicating various error codes which relate to these problems
and many more. At times we tend to ignore such logs however are very meaningful.
Sharing this to minimize a lot of headaches for fellow colleagues who should not suffer the way we did.
Cheers
Faisal Khan.

Could not retrieve the in-memory service URL after starting the in-memory.

A local jvm process is discovered but mission control will not connect.
Both jvm process and mission control are on the same host.
Any suggestion?
Thanks.
This is the mission control help version:
Oracle® JRockit Mission Control 3.1.0 (R27.6.3-40_o, 112101)
I'm running mission control and a jboss web server on jrockit:
$ java -version
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
On linux:
$ uname -a
Linux isidore 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
This is the message that appears in the controlling tty window:
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
SEVERE: Could not retrieve the in-memory service URL after starting the in-memory agent!
Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
Here is the exception in the dialog details:
Could not open Management Console for [1.6] JBoss (5,474).
java.lang.NullPointerException: null
java.lang.NullPointerException
     at com.jrockit.mc.rjmx.ConnectionDescriptorToolkit.getHostName(ConnectionDescriptorToolkit.java:152)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:521)
     at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:144)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.establishConnection(RJMXConnectorModel.java:111)
     at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.connect(RJMXConnectorModel.java:154)
     at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:95)
     at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:61)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:38)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:74)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

After I posed the above, I saw that the url on the exception is munged.
I didn't stumble over how to manually override that url.
Instead, I added remote jmx capability to the process and added a connector. That is my work around.
Thanks,
John

Document Series Error after creation of a new Posting Period

Hi
While Creation of a new Document Series for user created UDO (after creation of new Posting Period
with Period Indicator) on update its showing a message box
"Application Error occurred, Dump file created in path C\Program Files\SAP\..\Log......"
And soon SAP B1 gets exit.
Can any one help me to come out of this problem.

Hi,
Whenever Dump file created, it is high time to log a message to SAP support. This problem is beyond forum function.
Thanks,
Gordon

Service Desk Message Creation Error on R3E System

Dear Team ,
We are not able to create the message from R3E System.Whenever we are
creating the message from R3E Satellite system ,message is thrown "Error513 , No Message is not created in service Desk." At the same time, in
CRM_DNO_Monitor on solution manager system , I am able to see thismessage without external reference number. This solution manager is
connected to 5 satellite systems where service desk message creation is
working fine.
This problem is occuring only with R3E & R3T System.and it might affect
to R3P production servers also . Kindly look into this as urgent issue
Message creations on R3E systems was working fine upto 12/4/2008.
HR/ABAP/BASIS Patch Application activity was carried out on 17/4/2008 onR3E System.Kindly suggest if this has affected message creation.
Regards,
Pavan.

Hi pavan,
Pl check ,action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO) is correct or not also check
Number ranges are assigned correctly.
Assign the points ...
Regards
Chandravilas
Edited by: Chandravilas Sonawane on May 14, 2008 12:13 PM
Edited by: Chandravilas Sonawane on May 14, 2008 12:25 PM

Error ' Quantity exceeds quantity in PO' in service entry sheet creation.

Hi,
I am getting error "Quantity entered 7,000 exceeds quantity 5,000 in purchase order' , Message no. SE363" while creating service entry sheet
PO Quantity - 1 AU
Service quantity - 5 HR
in service entry sheet creation i am giving 6HR instead of what is planned in PO
Not sure what driving this error, please help
Thanks

Hi
Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be able to accept service overdeliveries even if you have the unlimited indicator set.
Regards,
Mauro

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

Baseline date in Accounting document changed after creation of Invoice List

Hi all,
1) User Requirement:-
Creation of Invoice document(using VF01), Transfer u201CGoods Issue Dateu201D to FI accounting as a Baseline date instead of Invoice creation date.
To meet the above requirement I did enhancement name: SDVFX008 user exit: EXIT_SAPLV60B_008.
Its working fine and transfered goods issue date to Accounting(as baseline date) insted of invoice date.
2) Problem:-
After Creation of Invoice List (VF21) system again overwriting baseline date iwith invoice list date.
Does anyone know how to Stop overwriting baseline date in accounting while creation of invoice list.
Thanks & Regards
Sudheer

Hi Valerie,
do you recall the User Exit?
Thanks

Purchase order rate change after creation of gr.

In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
We want to restrict the po line item rate change after creation of goods receipt against that line item.
Please suggest.

solution 1 : Do not give authorization for ME22
solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
try above 2 solutions which are simple

Configuration steps involved after creation of new personnel subarea in sap hr module

Dear Friends,
Let me know what all config to be done after creation of a new personnel sub area in SAP HR module?
So that all infotypes including IT0007 & IT0008 are captured for hiring an employee & running the payroll ?
Reg,
TD

Hi Tanuja,
Normal customization only you have to do for every PA & PSA. if you don't have the steps i will give you the steps.

Auto Creation of Delivery with PGI and Billing after creation of Sale Order

Dear Experts,
I am having one Req. like...After creation of sales order ..automatic Delivery and Billing should be done.
Right now i m able to create automatic Delivery but PGI is not happening for that delivery.
Is there any configuration I have to do ... or by any user exit we can get the solution.
Can u please provide me solution for this.
Regards,
Sanket.

Hello,
yes, you can create the PGI Atomatically by BATCH JOB using the program nder the VL23 transaction code.
Goto the Transaction code SM36 to create a job for the program SAPMSSY0 which is the program for the AUTO PGI
create a variant for the Delivery document types and sales organisation combinatioans and add this variant to the bath job created in SM36.
Set the time of the Job to run after every 5 minutes, so once the job exected it will pcik all the Deliveries which are pending for the PGI.
After the PGI done you can run SDBILLDL program to create the Billing for all the document which were cleared and due for Billing.
Hope it is clear for yo, please revert if you need frther clarification .
santosh

No cubes are reflecting in XIP ,after creation of manual IDOC

Hi Experts,
I am got a mail from client saying that "No cubes are reflecting in XIP ,after creation of manual IDOC"..
Please tell me weather this is issue is related to XI or not if it so, Can you please anybody tell me how to look into this type of issue...
Please help me..
Many thanks in advance..
Regards
Raj

Hi ,
Thank you Sourabh, so I need to get the IDOC basic type from customer and need to check the IDOC using IDX5. Please correct me if I am wrong..
With Warm Regards
Raj

Service entry sheet creation for planned services

Hi,
I have created a service purchase order with planned services. After this I am trying to create a service entry. During ML81N, I give the P.O number and then click on create service entry.
However, to adopt the services from the purchases, there is a service selection tab which takes the user to the services tab of the purchase order and then the user must select the relevant service and click on the adopt button to bring the service into service entry sheet screen.
However, in my case, the service selection tab is not appearing on the service entry screen. Hence I am not able to call the services from the purchase order. I am on ECC 6.0 version.
Am I missing some step in config or in procedure ?
Kindly advice.
Regards,
Rajeev

Hi,
This doesn't sound like a config problem.
If the services are on the PO then you should be able to select the option to choose them from the PO services.
A remote (very remote) possibility is that you may have an authorisation problem, stopping you from being able to use the PO details? Is this possible? do you have authorisation to change this PO via ME22N etc:?
Steve B

Service Request disappears from the list of My Service Requests after changing status to In process

Service Request disappears from the list of My Service Requests after changing status to In process
Incident manager (resp.) > Agent Dashboard

Hi,
As far as I know, this is a new feedback, Please vote this customer voice, here is the link:
http://feedback.azure.com/forums/216926-service-bus/suggestions/6062851-batching-in-rest-api, or create a new voice at azure feedback forum:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Chnages in Service PR after Creation of PO

Similar Messages

Maybe you are looking for