Choice of the interface module, for step motor

Hello,
I would to control a step motor through the Labview software (control speed, direction of rotation, number of steps ...) Thus, I would like to know which module interface NI would be the best suited to my engine, for the control and the electric supply.
The engine is a : Superior Electric, type M061; 7V, 7A
Furthermore, I also looking for all documents (examples, tutorials) that can help me to program the VI on Labview : hardware installation, programming on Labview .
Many thanks for your help,
Regards,
A. Benjamin

Hi,
Are you looking for the Software interface only? Do you have
the drive and controller already? Are you
looking for a PCI solution or a cRio? NI offers different solutions. Check Motion Control from NI. Also here are some
links to help you understand the concept. When you decide what approach you
want to go, let us know and we can help you get started. Also, many examples will
be installed when you install the NI motion drivers.
Fundamentals of Motion Control
Motion Control Resource Kit
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National Instruments

Similar Messages

Trying to install the output module for Bridge CC but there is no extensions folder for Windows

I am trying to install the output module for Bridge CC on a Windows system, but there is not an extensions folder in my Bridges CC folder. I have seen several discussions about this issue for Mac's but nothing on a PC. Suggestions that I could use to remedy this situation? - Thanks!

For installing it please download the package as listed in the below mentioned link and follow the install instructions.
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
Please follow the below mentioned steps:
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location as mentioned:
Windows 64-bit:                Go to C:\Program Files (x86)\Common Files\Adobe\Bridge CC ExtensionsWindows 32-bit:
               Go to C:\Program Files\Common Files\Adobe\Bridge CC Extensions
2.   Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder (location as mentioned in Step 1).
Do let me know if this helps.
Regards,
Ashutosh

How to find the function module for standard tables.

Hi
Could any one please tell me how to find the standard function module to update the standard tables
Thanks & Regards
Sowmya

Hi sowmya,
To find the function modules for standard tables you go for a where used list of that particular table and check only function module interfaces checkbox...
and more over you can go for DB_UPDATE_TABLE will be the function module for updating database table..
Hope this information would help you
Regards
Narin Nandivada

Guide for configuring the Claims module for India Payroll

Hi all,
I am configuring the Claims module for India Payroll.
Can anyone please help me with a step by step guide.
Currently I have maitained a few types of claims under spro->Payroll->India Payroll -> ESS->Advance Claims->Reimbursement Types->Maintain Attributes of Reimbursement Types.
But when I try to submit any claim request from portal, its giving the error "Employee number not maintained for : 00005007".
It would be helful if anyone can provide help regarding activating the claims workflow (WS18900023) as well.
Thanks in advance,
Sattam.

Hi Praveen,
Thanks a lot for ur reply. I have done those configurations, still I will check again.
I have identified another error. When I try to add a start event to the worlfow WS18900023, and activate it.....its giving the error "BUS1009 cannot be executed" .
Is this the cause of malfunction? If yes how to solve it?
Pls Help
Sattam.

How do I turn off hierarchical keywording in LR 5? The interface preference for auto complete is off and I still get California United State Country. I just want Caliofrnia.

How do I turn off hierarchical key wording in Lightroom? The Interface Preference for Auto Complete is already turned off, but I still get California>United States>North America when all I need is California.

You need to be signed in order to reply to posts.
One reason why you may see the hierarchical type format for the keywords is that you have keyword 'California' duplicated in your keyword list.
Lightroom will display them with "< Parent-keywords" appended to the end.
ie California < State < Country and California < United States
If you re-keyword the photos so they only use one version and then delete the duplicate keyword from your keyword list then it will display just "California".
Bruce

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

How to findout the Function module for a particular object

Hello friends,
   Related to my thread, there was one thread in the forum,to find out the function module for a particular object.I tried the solution provided my our experts but couldn't got the results.Thats why i am putting this thread again.
I want to find out the function modules used for the particular object, i.e. Production order.
   solution i tried is, first go to T.C SE37, then in function module field put the object name like Production order and enter, than it will show another screen, there also put object name in function module field and than press enter, it will show all the function modules available for that object.
    So could you guys help me out to find out where i am wrong in the process of finding out the function module for a particular object.
                       Plz don't bother abt the point.Helpful answers will definitely get awarded.
                            Thanking you guys for your valuable support till now and hoping to get in future too.

Dear
When the problem is solved please give points too. Otherwise why people will help others, give time and share their valuable knowledge. This will build up self confidence.
If not solved and closing, then mention the difficulties what u exactly looking for. Simpy closing is not enough because who ever is providing solution will not able to know the real problem.
How to give points I believe u already know that and need not explain.
I had seen many times this problem with others too. Even if the problem is totally resolved they give 2 in stead of 10.
Edited by: BNR on Sep 21, 2008 6:10 PM

Can you cure this problem ... no text cursor is available in the description box for step 4 of eBay.co.uk selling

I use XP Pro SP3 + Firefox 16.0.2
Since yesterday, when trying to sell an item on eBay.co.uk, no text cursor is available in the description box for step 4, so it is not possible to enter text.
However, text can be entered into all the other text boxes on the selling page.
For comparison, using Internet Explorer 7, text can be entered into that text box.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

What is the equalent module for SAP BASIS in ORACLE

Hi,
This is Krishna, i am new to Oracle, i am working as SAP BASIS Consultant and now i am planing to shift oracle please anybody help me " what is the equalent module for SAP BASIS in *Orcale*?".
Thanks in Advance to Everybody.
Krishna,
SAP BASIS Consultant
Edited by: user12292549 on Nov 30, 2009 11:41 PM

Hi,
Just use Trinidad's, I don't think 11g has an equivalent and Chris suggestion won't really work in this case as visible="false" is the same as rendered="false" for decoding purpose and you want it to be decoded in your case. Another poor man's solution would be
<af:inputText value="..." inlineStyle="display:none;"/>Regards,
~ Simon

Where can i download the weblogic modules for apache (source/precompiled)

I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.

At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus

Want to know the function module for Partial Payment F-28 in FI

Hello all
i want to know the Funtion Module for the documents in which Partial payment have been made .
For that i have the customer and invoice number .

Hi,
Use the FM FI_TERMS_OF_PAYMENT_PROPOSE for calculating the Payment due date call function 'FI_TERMS_OF_PAYMENT_PROPOSE'
hope it will help u.
thanks,
Neelima.

Requesting the relevant links for step-by-step or TAB'S for SEM-BPS

Hello Pro's,
Greetings for all.
I am surendra. I am working as a bw consultant since 2years. Now I want to learn SEM -BPS. i am exploring SDN to learn SEM-BPS, but it is very complicated to understand.
I request you to suggest ease method to learn the sem-bps and also if any materials like step-by-step or TAB'S.
please post the relevant links for step-by-step or TAB'S.
Thanks,
suri

Hi Surendra,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation. Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
Also check this too
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

In LV, using TS API, how do I specify the VI module for a Pass/Fail step?

I am writing a LabView VI which will let a user write a TestStand sequence. Each step in the seq is the same type, a Pass/Fail test. I need to specify for each step the LabView VI module location, and an input buffer. I am having difficulty finding out how to specify the module for the step using the TestStand API in LabView. How to do this????

Hi Drew,
I think Dennis might have come at this from the wrong angle.
Have a look at the example that ships with TestStand under
\Examples\SequenceBuilderTool\LabVIEW
This might give some clues, but I'd suggest posting this question over to the TestStand discussion Forum as suggested by Dennis.
There'll be a few more people there who can help a bit more in-depth
My personal suggestion is to create a custom step type that calls the .vi's and then you can create the steps in a new sequence file using your tool easily. This could be cumbersome for you if you already have a lot of steps setup.
Better then to create a resource to get the steps out of to clone them by creating a sequence file which is full of your steps. When you have a handl
e to a cloned step, you can change properties about it in memory, before putting it into the sequence (i.e. change it's name and stuff)
Otherwise you need to get the type and create a new step of this type.
If all you're stugling with is the module to call, then for the step you have a handle to, change the
you can either change the "Step.TS.SData.ViPath" as a string (TestStand set property value String with a reference to the sequence_context) or if you wanted to bring up the specify module dialog, if you have a handle to the step itself, call the method SpecifyModule.
Hope that helps
Sacha.
// it takes almost no time to rate an answer

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

Regarding parameters in the selection module for Datasource

Hi
I created the datasource and selection module.
Since the table parameters are no longer supported in the system ,i used changing parameters instead for selection module.
But in the generated call_select_function it is still using the table parameters to call the selection module and raising an error 'parameter is not defined' error
Please let me know how can i resolve this issue
Regards
Leon

Dear Leon,
I hope this earlier posting will be of some help...
Steps for Creating DataSource based on Function Module
Tables Tab:
============
i) Parameter Name = I_T_SELECT; Associated Type = SRSC_S_IF_SIMPLE-T_SELECT
ii) Parameter Name = I_T_FIELDS; Associated Type = SRSC_S_IF_SIMPLE-T_FIELDS
iii) Parameter Name = E_T_DATA; Associated Type = 'Like your extract structure'
Please NOTE: Please make sure that you have a tick on 'Optional' for all of the above. Also 'Type Specification' for E_T_DATA will be 'LIKE' but for the other two it will be 'TYPE'.
==========
When I try to change the E_T_DATA table parameter to my structure,
I receive message FL069 "TABLES parameters are obsolete!".
Have you encountered this problem ?
==============================
I could not exit the tables tab once the warning message was displayed.
However, I have since discovered that you don't need to specify the type spec and the associated type at all.
You can just leave them blank and only specify E_T_DATA in the Parameter Name.
The extractor seems to work just fine.
Refer the below weblog by Siggi...
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Regards, ABY

Choice of the interface module, for step motor

Similar Messages

Maybe you are looking for