Choose accent color for hovered icons when using dark interface in Bridge?

How about add the ability to choose the accent color for hovered icons when using a dark interface in Bridge? Currently, the icon color remains orange and unchangeable. Personally, I would prefer a blue accent color to match my system. Any chance of making this possible in CS6?

Oh, I should add that I'm looking for solutions somewhat up-to-date and/or are related to or designed for 10.6 Snow Leonard. I did a search for answers before asking the question, and the (mostly unsatisfactory) answers I found were all from several years ago and applied to earlier versions of OSX (10.3, 10.4, etc.), and therefore no longer were relevant or usable.

Similar Messages

The cyan color won't print when using our HP Pro 6500 Officejet printer

the cyan color won't print when using our HP Pro 6500 Officejet printer. Can I get help with this?

This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

No performance gain when using local interfaces

Hello,
I'm doing some tests to compare performances between remote ejb interfaces and local ejb interfaces.
I have two stateless session beans EJB1 and EJB2, EJB1 calls a method on EJB2, this method receives one object as the only parameter and returns it immediately. The parameter is a big object (~700ko). My test consists simply of making 1000 calls from EJB1 to EJB2, one time with remote interfaces, one time with local interface. For both tests, the EJBs run in the same container, same VM.
The results show absolutely no differences between the remote and the local interface !
As I found these results a bit surprising, I changed the serialization method of my parameter object this way:
private void writeObject(java.io.ObjectOutputStream out) throws IOException {
System.out.println("writeObject(MyBigObject)");
out.defaultWriteObject();
just to check if my object is serialized when using remote interface. And the response is no.
So question is: is there an "undocumented optimization" of the stub/skel generated by weblogic which make local calls when calling a remote method inside the same VM ?
Some precisions:
- I'am using weblogic 8.1sp2
- When calling remotely my EJB2 from an external batch (running in a separate VM), I see the message "writeObject(MyBigObject)" so the serialization is done in this case.

<Fr?d?ric Chopard> wrote in message news:[email protected]..
So question is: is there an "undocumented optimization" of the stub/skel generated by weblogic which make local calls when callinga remote method inside the same VM ?
>
Some precisions:
- I'am using weblogic 8.1sp2
- When calling remotely my EJB2 from an external batch (running in a separate VM), I see the message "writeObject(MyBigObject)" sothe serialization is done in this case.
WebLogic 5.x, 6.x and 7.x do call by reference for co-located EJBs by default. 8.1 has this behavior turned off by default. You may
experience call-by-reference optimization in 8.1 only if it has been turned on explicitly in the deployment descriptor.
Hope this helps.
Regards,
Slava Imeshev

Strange behaviour of name used for desktop icon when mounting SMB shares

My iMac is joined to a Windows Active Directory domain. This works fine. User logins are setup to mount various Windows shares at login time using some custom scripts that I have written, invoked from an Applescript app that runs as a login item. Again this works very nicely. The one strange thing is as follows, and this is troublesome for me...
The sequence of commands used to perform the mount is:
mkdir /Volumes/mountpoint
mount -t smbfs //servername/sharename /Volumes/mountpoint
This correctly mounts the share on /Volumes/mountpoint
but the desktop icon that appears as a result is called 'sharename' not 'mountpoint'. Why is this a problem? Well consider that one has the following shares that one wants to mount:
//Server1/System (will be mounted on /Volumes/Server1System)
//Server2/System (will be mounted on //Volumes/Server2System)
what I'd like to see are two desktop icons with names 'Server1System' and 'Server2System' but in fact I end up with two icons both called 'System' with no way to tell which is which other than actually opening one of them in Finder.
Anyone know
(a) Is this behaviour expected (i.e. by design)?
(b) Is there a way to control the name used for the desktop icon when mounting things this way?
Thanks!

But, to invoke your app you will need to include it, otherwise you get the error above
sometimes you call
http://host:port/blank/page.jsp
instead of
http://host:port/blank/faces/page.jsp
In the last one the Faces Servlet will get your request and locate page.jsp inside the faces context. If you don't include it then you get that error

Blank screen for few seconds when using "bright applications"

Hi
I have my MSI GF5600 VTDR256 for almost a year now and still facing the same problem (after various driver updates still existing :-( )
When I use application with a lot of bright colors, like Apple iTunes for example, the screen goes blank for 2 or 3 seconds and then returns to my application. Sometimes the screen isn't built up like it should be (pieces of text unreadable, desktop showing "through" some parts of the application). Problem also occurs when quickly scrolling websites with a lot of white in it.
I connected my Philips 170B4 17" TFT using a DVI cable to the MSI card. Don't know whether the problem occurs when using a VGA cable to connect my monitor.
The following screenshot illustrates how my screen looks after having another blank screen:
Somebody any suggestions?

I recently reinstalled my computer, so I started with the latest driver at that moment and the problem occured.
I have a 400 Watt dual fan power supply feeding:
- Gigabyte GA-7VRXP Mainboard
- 1024 MB PC2700 memory
- MSI FX5600 VTDR256
- 1 onboard RAID controller with two 20 GB Harddisk RAID 1
- 2 additional harddisks
- Sound Blaster Live Drive
- Plextor PX2410
- Plextor PX708A
- Floppy drive
- LeadTek TV Card (2000/Expert)

HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
Hope someone else might have a solution.

Color Settings: Getting colors in PS CC to match colors of the image when used as a Windows Background

or vice versa. I probably do not know enough to be able to ask the question properly.
The colors of photos in PS CC are not the same when used as a desktop background in Windows 7. The colors are somewhat more saturated when as a background on the desktop and while not totally unusable, it would be nice to have matching color between my PS editing screen and the photo as viewed as a desktop background.
The following are some conditions that may or may not be relevant to the answer of my following question.
1.) I am a complete novice to Color Management so a presumption of knowledge and the heavy use of jargon may not penetrate my head.
2.) I shoot with sRGB embedded in my photos.
3.) My RAW conversions use sRGB IEC61966 - 2.1.
4.) My PS Color Settings are North American General Purpose 2 with sRGB IEC61966 - 2.1 as the working space and Intent as Relative Colormetric
5.) In the Win 7 Control Panel>Color Management>Device, my Device = NEC LCD2690wuxi, ICC Profile = NEC LCD2690wuxi (default), file name = nl269wui.icm
6.) In the Win 7 Control Panel>Color Management>Advanced, Device profile = System Default sRGB IEC61966 - 2.1 and (everything else set to System Defaults too). The only difference from the PS Color Settings being that Windows is defaulted to Perceptual Intent, but a change in either PS or Win 7 has no effect on the relative color differences.
7.) The monitor is set to the Native internal preset, but the relative differences in color remain the same even if the monitor is changed to sRGB, or any other internal preset.
8.) I have Proof Setup set to Monitor RGB but none of the settings will match the Win 7 Background color.
Now, my question is this. How would you set up your color settings/profile in PS and/or Windows to match color between PS and the Windows desktop of Windows 7?

Nevermind. I didn't have Proof Colors checked.

Need advise for best practice when using Toplink with external transaction

Hello;
Our project is trying to switch from Toplink control transaction to using External transaction so we can make database operation and JMS operation within a single transaction.
Some of our team try out the Toplink support for external transaction and come up with the following initial recommendation.
Since we are not familar with using external transaction, I would like member of this forum and experts, to help comment on whether these recommendation are indeed valid or in line with the best practice. And for folks that have done this in their project, what did you do ?
Any help will be most appreciated.
Data Access Objects must be enhanced to support reading from a TOPLink unit of work when using an external transaction controller. Developers must consider what impact a global transaction will have on the methods in their data access objects (DAOs).
The following findSomeObject method is representative of a finder in the current implementation of our DAOs. It is not especially designed to execute in the context of a global transaction, nor read from a unit of work.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
ClientSession clientSession = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
obj = (SomeObject)clientSession.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
clientSession.release();
if (obj == null)
// throw an appropriate exception
return obj;
However, after making the following changes (in blue) the findSomeObject method will now read from a unit of work while executing in the context of a global transaction.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
Session session = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
if (TransactionController.getInstance().useExternalTransactionControl())
     session = session.getActiveUnitOfWork();
     readObjectQuery.conformResultsInUnitOfWork(); }
obj = (SomeObject)session.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
if (TransactionController.getInstance().notUseExternalTransactionControl())
     session.release();
if (obj == null)
// throw an appropriate exception
return obj;
When getting the TOPLink client session and reading from the unit of work in the context of a global transaction, new objects need to be cached.
public getUnitOfWork(ILoginUser aUser)
throws DataAccessException
     ClientSession clientSession = getClientSession(aUser);
     UnitOfWork uow = null;
     if (TransactionController.getInstance().useExternalTransactionControl())
          uow = clientSession.getActiveUnitOfWork();
          uow.setShouldNewObjectsBeCached(true);     }
     else
          uow = clientSession.acquireUnitOfWork();
     return uow;
}

As it generally is with this sort of question there is no exact answer.
The only required update when working with an External Transaction is that getActiveUnitOfWork() is called instead of acquireUnitOfWork() other than that the semantics of the calls and when you use a UnitOfWork is still dependant on the requirements of your application. For instance I noticed that originally the findSomeObject method did not perform a transactional read (no UnitOfWork). Has the requirements for this method changed? If they have not then there is still no need to perform a transactional read, and the method would not need to change.
As for the requirement that new object be cached this is only required if you are not conforming the transactional queries and adds a slight performance boost for find by primary key queries. In order to use this however, objects must be assigned primary keys by the application before they are registered in the UnitOfWork.
--Gordon

"No enought room on startup disk for Application Memory" when using the Accelerate Framework

Dear colleagues,
I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
After a short while, I get the "No enought room on startup disk for Application Memory error"
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your help will be greatly appreciated
Best regards,
F Lorenzo

The OP had posted this question in the iMac Intel forum.
I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
I would be interested in getting their take on this.
Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
My guess is that it is the combination of low available memory and low free drive space prompting this error.
From Dr. Smoke on VM:
it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
This gets more to the actual intent of your question...
EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
Message was edited by: WZZZ
<Hyperlink Edited by Host>

Performance Impact for the Application when using ADFLogger

Hi All,
I am very new to ADFLogger and I am going to implement this in my Application. I go through Duncan Mill's acticles and got the basic understanding.
I have some questions to be clear.
Is there any Performance Impact when using ADFLogger to slower the Appllication.
Is there any Best Practices to follow with ADFLogger to minimize the negative impact(if exists).
Thanks
Dk

Well, add a call to a logger is a method call. So if you add a log message for every line of code, you'll see an impact.
You can implement it in a way that you only write the log messages if the log level if set to a level which your logger writes (or lower). In this case the impact is like having an if statement, and a method call if the if statement returns true.
After this theory here is my personal finding, as I use ADFLogger quite a lot. In production systems you turn the log lever to WARNING or higher so you will not see many log messages in the log. Only when a problem is reported you set the log level to a lower value to get more output.
I normally use the 'check log level before logging a message' and the 'just print the message' combined. When I know that a message is printed very often, I first check the level. If I assume or know that a message is only logged seldom, I just log it.
I personally have not seen a negative impact this way.
Timo

Report for cost centers when using MVT 261

Guru's,
Most of the request for material for our storerooms are done through a work order and issued out using MVT 261. We're trying to find a report that shows the cost centers used when using MVT 261. I've tried using MB51 and MVT 261 but no cost centers populate. When I use MB51 and MVT 201 for reservations created manually there's no problem, all cost centers are populated.
Thanks
Eric

Hi,
The movement 261 is for Issue to Order & no issue to Cost Center, hence you have the problem.
You will get only the order number is case of 261.
Regards,
Prashant

How to populate column titles for y values when using Write to Measurement File Express VI with a tab delimited text-based .lvm file?

The .lvm file generated by the Write to Measurement File Express VI includes column heading titles for the y values, but they are a default value of "untitled". See attached example of a sample file when opened in Excel, the values in question are highlighted. Is there a way to specify the column titles when the file is written?
This is a similar question to this posting, which received a work around response to use the Write to Spreadsheet File.vi, rather than a solution when using this VI.
Message Edited by Hightop Raven on 05-02-2007 03:37 PM
Attachments:
column_titles.gif ‏13 KB

Sorry for the late reply. I was out of the office Friday.
You can do it, but the code can get rather ugly. Under the hood, the dynamic data type (the dark blue wire) is an array of waveforms. In your case, the scalar values you convert to a dynamic data type are being converted to an array of waveforms, each waveform having one element. You have two options.
Explicitly convert your scalars to one-element waveforms (t0=0, dt=1) and add the title before conversion to a dynamic data type.
Convert your dynamic data type to an array of waveforms and loop through them to add the column labels. The conversion blocks are in the Signal Manipulation Express palette.
I would recommend 2, since it is the easiest to add. It is also the easiest to run only on the first iteration. Just put a case selector around the loop, wire the selection to the While loop iterator, and set the case containing the label code to 0. The default case simply passes through the dynamic data.
My apologies for not including a screen shot. I am in the process of upgrading my machine and can't run LabVIEW. If you need one, let me know and I can post one tomorrow.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Choose accent color for hovered icons when using dark interface in Bridge?

Similar Messages

Maybe you are looking for