Choose application window runs SLOW

When choosing a default application, or just an application to open with, it runs INCREDIBLY SLOW. As in, 5 seconds to render every change (scroll, click, etc). Everything else runs marvelously.
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Model Name: MacBook Pro
Model Identifier: MacBookPro10,1
Processor Name: Intel Core i7
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP101.00EE.B05
SMC Version (system): 2.3f35
Serial Number (system): C2QN502TFG1J
Hardware UUID: 844B3DBD-6D74-528A-B160-06F19232D10D

I created an account on here just to say that I'm having this exact same problem as you. It just started out of nowhere and I have no idea how to fix it.

Similar Messages

SAP B1 APPLICATION IS RUNNING SLOW IN SERVER AFTER UPGRADE

Hi,
The sap application is running slow in server after upgrading it from 9.0 to 9.1 it's taking 5-10 secs to open a document after clicking it and its taking more time in client system.
what are the steps to be taken so that the application will run without any delay.
Regards,
Karthik B

hi please check bellow thread ,it may help you
Client Machines Logon to SAP Server is Very Slow
update the status
regards
AKR

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Windows running slow on 512 RAM

i was just wondering if running windows on the macbook on 512MB RAM will be really slow. cuz i heard that the ram is designed to be really fast for the mac os but when you run windows it's different. I'll only be using the macbook for photos, music, school stuff, movies. let me know if you have anything else to say about this like maybe upgrading the harddrive or whatever.
thanks.

It is difficult (nearly impossible) to compare RAM performance under MacOSX vs. Bootcamp WindowXP (Or Windows system in general). Benchmark out there are only for reference and different people have different sayings which is simply confusing.
However, there are tons of reviews on the net that shows Bootcamp Windows performance is similar to other notebook PC on the market. Apple Macbook performance is definetely not the best, but not too bad.
So the general rule for upgrading notebook applies to MacBook as well. If you have cash, dish out more RAM. This will benefit the overall machine performance significantly.
I agree with the other poster here regarding the requirement of RAM under MacOSX and WinXP.
I've upgrade my brothers Macbook to 1.25GB and my Mac Mini to 1.25GB. Both machine shows significant improvement on most operation.
So if you have $, try to spend as much as possible on RAM.

Running Slow, Displaying information I can't find...

I have a MacBook Pro and when I run any application it runs slow. At first I thought, 'It is almost full, I should clear it.' I did, about 30 gigs of it but it is still running incredibly slow. I've looked into About This Mac and it says there is 100.27 GB worth of Movies. I have no idea what these movies are but I can't locate them anywhere on my mac. Anything that I did have on my mac I transfered to an external harddrive and had deleted (or so I thought). I've run OmniDiskSweeper but even that can't locate the movies. Aparently there is 56.31 GB worth of Other things on there too! I have it plugged into power but it still runs slow. I've been meaning to take it in to have the battery replaced (or serviced as it has notified me a couple times but just dissapears) as it has done 757 Cycles, which I assume is recharges. Just choosing the Apple logo and then About This Mac takes about 30 seconds per selection. Any gesture takes forever to load as well. Choosing another window take ten to fifteen seconds to swap over. So any selection really takes ten to forty seconds to swap over. I've shut down, and restarted my computer but still no luck. I'm a little confused as the only time I have EVER experienced this - and I don't mean to start any quarrels - was with a Windows computer.
I'll give you an indication of how slow it is. I've opened Safari and have Apple as my home page. Twenty-five minutes have passed by but the loading bar is sitting comfortably with the 'o' in .com. Running pages takes forever to load and so does keynote. As does Word and PowerPoint. I do not know what else to do. I've been cleaning things off and erasing free space, deleting trash and deleting trash securely. I'm at a loss! My MacBook has never run this slow and has been so relaible until this pass couple months. I'm confused. The following is what my Mac is...
MacBook Pro
13-inch, Mid 2009
Version 10.8.4
Processor 2.35 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
I probably sound like a clueless fool, but I've never had problems like this. Usually I'm the one helping my friend, parents, and other colleagues with computer matters. Any advice and help would be greatly appreciated!

Have you opened Disk Utility>First Aid and run Verify and Repair?
Also look at these comprehensive documents for other possible solutions:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.
Message was edited by: OGELTHORPE

Application runs slower on Solaris

We have developed an Application in Java (Servlets, JSP & Core Java classes including thread).
My Application runs fast on Windows, but its terribly slow on Solaris. When the application is run on Solaris the CPU usage is very less around 3 to 5 % only and there is no major io bound operation also. Please comment on this behaviour when am running the application on Solaris.
For eg: A while loop in my program took around 16 msecs to execute in Windows machine, but the same while loop is taking 250 msecs to run in solaris.
Note: The solaris machine is very powerful than the desktop windows machine.
Thanks & Regards,
Salin

Which version of Solaris are you running and what threading library is currently in use? Did you use some profiling application to arrive at the benchmark results you obtained or some other means were used? Does the code within the while loop call any classes making use of Java threads and synchronization mechanisms?

Macbook running slow, applications shutting down.

so my macbook is running slow lately, and it keeps on autimatically shutting down applications.-e.x. skype
how could i fix this?
could this be a trojan??
thanks

Not necessarily malware...
Carina... which Mac OS X do you have installed?
How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

MacBook Pro is running slow and All applications getting not responding..

MacBook Pro is running slow and All applications getting not responding after every 30 seconds. I have tested by hardware test nothing wrong with hardware. I am worried Because I am totally stuck with my macbook pro Help me Please !!! I have tested by creating guest account and also new account as administrator. same thing happened. apps running. I opened activity monitor and watched carefully when any app stucked, In activity monitor there is in front of ap name following text appeared : (Not Responding) in red color. 129GB free memory, 4 GB RAM Core i3 MacBook Pro 13 inch.
Instant help needed..
Thanks in ADVANCE !!!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

I am trying to launch Firefox 9.0.1 on Windows 7 but the application window isnt visible even though there is a firefox.exe process running in task manager.

I am trying to launch Firefox 9.0.1 on Windows 7 but it isnt working. I try to launch it and the application window does not show. When I look at the task manager and then look at the Applications tab, Firefox isnt listed. If I go to the Processes tab, there is a firefox.exe*32 process listed. Each time I double click the Firefox icon, a new firefox.exe process is spawned but there is never a visible instance of the Firefox application.
There are no errors in the application logs. I end up just having to kill the processes.
I tried launching in safe mode by holding down the shift button but the same thing happens.
Any suggestions on what to try? It has never worked since upgrading from version 8. I tried un-installing and re-installing

I went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
There are no default folders appearing under the profile folder when I start Firefox.
I have Firefox installed to my E drive.
Nothing happens. The process appears in the task manager but no application shows up.
Cant start it in safe mode, cant run the profile manager.

I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what....

I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
The tools are not responding when I try to use them. Some of them work sometimes, but not others and some don't work at all. I'm in a design class online and I need these tools desperately. I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
Any help anyone can give me will be appreciated.
Thanks,
Rose Ireland

Maybe these links provide some pertinent information.
Optimize performance | Photoshop CS4, CS5, CS6, CC
Photoshop: Basic Troubleshooting steps to fix most issues

I have an OpenGL application that run in a window. I would like to use this application and use its window in a VI interface. Note t

hat I DON'T WANT TO OPEN the window application FROM the Labview VI BUT IN the Labview VI. I think it's possible to do that and to do communicate the OpenGL application with the Labview Interface using an ActiveX but I don't know how. Can someone help me ?You can answer the question or send it at [email protected]
Regards.
Cyril

hat I DON'T WANT TO OPEN the window application FROM the Labview VI BUT IN the Labview VI. I think it's possible to do that and to do communicate the OpenGL application with the Labview Interface using an ActiveX but I don't know how. Can someone help me ?The desired behavior you desribed may not be possible with that application. In general LabVIEW does not offer a window object that other standalone applications can run it. The closest thing is the ActiveX container. If the programmers for your application created an activeX control of your program and they provided documentation, it should be pretty easy to incorperate the app and labview into one window. I recommend contacting the manufacuturer of the app to see if they have an activeX control version of the app.

Jdev 11g application is running very slow.

Hi,
I have deployed the application on Solaris OS, Weblogic 10.3.2 and JDev 11g.
Application is running very slow, means each page is taking time to launch.
Server setup is as follows:
8 cpu's
6gb of memory
8gb swap
15gb /apps
20gb /logs
Please let me know if I need to set any parameters at server level to improve the application performance.
Thanks.

Oh, yes, of course, your /logs partition should be 22.25 GB instead of 20 ;) (that was a joke before you run off and ask for more space)
To amplify what Timo said, you've provided actually no information whatsoever that would help anyone even begin to know what is causing the performance problem. Have you looked at the EM screens? Have you turned on logging to see if it's the database perhaps? You need to do much more diagnosis.
John

Script to get application stats running on multiple windows servers

Hi,
I am beginner in powershell and trying to write a script to get the different stats of an application/s running on windows WAS server. am trying to gather all the stats into one custom object and planning the tabular output to send via html mail.
am finding it hard to frame logic to get this done and below is piece of script. can somebody guide on this ?
# Get the profiles list in the server
$ppath = "profilePath"
$profiles = Get-ChildItem "profilePath" | ForEach-Object { $_.Name }
$SystemInfo = @()
$profiles | ForEach-Object {$_}{
$Obj = New-Object -TypeName PSObject
$pathToCheck = $ppath + $_ + "application path"
$SerFile = "profilePath" + $_ + "service file"
$ContFile = "profilePath" + $_ + "context file"
if(Test-Path $pathToCheck)
#Write-Host "Profile ==>" $_
$Obj | Add-Member -MemberType NoteProperty -Name Profile -Value $_
$PIDFile = $ppath + $_ + "PID file path"
if(test-path $PIDFile)
$ProcID = get-content $PIDFile
#Write-Host "PID ==>" $ProcID
$memTmp = Get-WmiObject -class Win32_PerfFormattedData_PerfProc_Process | where{$_.idprocess -eq $ProcID} | Select WorkingSetPrivate
$memUsage = $memTmp | Select -Expand WorkingSetPrivate
#Write-host "Memory ==>" $memUsage
else{
$ProcID = "PID Not Found"
$Obj | Add-Member -MemberType NoteProperty -Name Memory -Value $memUsage
if(test-path $SerFile)
$temp = Get-ChildItem -name $SerFile
$SerStr = $temp.Substring(0,4)
$nm = Get-Service -name *$SerStr* | Select Name
$name = $nm | select -expand Name
$sts = Get-Service -name *$SerStr* | Select Status
$status = $sts | select -expand Status
#Write-Host "Service Name ==>" $name
#write-host "Status " ==> $status
else{
$SerStr = "Service Not Found"
$Obj | Add-Member -MemberType NoteProperty -Name Service-Name -Value $name
$Obj | Add-Member -MemberType NoteProperty -Name Service-Status -Value $status
if(test-path $ContFile)
[XML]$rav = get-content $ContFile
$tmp1 = @($rav.GetElementsByTagName("context-root"))
$client = $tmp1[0]."#text"
#write-host "Environment" ==> $client
else{
$client = "ContextRoot Not Found"
}$Obj | Add-Member -MemberType NoteProperty -Name Environment -Value $client
write-output $Obj | format-table -autosize Profile , Environment

Hi Ravi0211,
The script below may be helpful for you, which can filter the process based on the property "idprocess" and the services based on the service "name":
$pids=@()
$output=@()
$output1=@()
get-content d:\processid.txt|foreach{
$pids+=$_} #store the processid as an array
Get-WmiObject -class Win32_PerfFormattedData_PerfProc_Process | foreach{
if ($pids -contains $_.idprocess){#filter the processid listed in the file d:\processid.txt
$Obj = New-Object -TypeName PSObject
$Obj | Add-Member -MemberType NoteProperty -Name idprocess -Value $_.idprocess
$Obj | Add-Member -MemberType NoteProperty -Name Memory -Value $_.WorkingSetPrivate
$output+=$obj}
$services = get-content d:\service.txt
Foreach($service in $services){
Get-service | foreach{
If ($_.name –like “*$service*”){#filter the service based on the service name stored in d:\service.txt
$Obj1 = New-Object -TypeName PSObject
$Obj1 | Add-Member -MemberType NoteProperty -Name Service-Name -Value $_.name
$Obj1 | Add-Member -MemberType NoteProperty -Name Service-Status -Value $_.status
$output1+=$obj1}
$output
$output1
I hope this helps.

Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window. Can't make it fill the screen. Just switched from windows. Thank you.

Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window. Can't make it fill the screen. Just switched from windows. Thank you.

Check to see if the resolution has been changed in System Preferences.
Allan

I recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in notebook trying to record.

i recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
Also, I feel that it overheats often and my battery runs out pretty quickly. I had the macbook (black) and this never happened before. I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

This is exactly what keeps happening to mine too. I was at a conference taking notes, and I was
using the Notebook template, and doing some audio recording simultaneously. About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working. However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it).
Does the crash happen to you under similar cirucumstances? The update might help a little, but it is definitely not the solution. Does anyone have any solutions? Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

Choose application window runs SLOW

Similar Messages

Maybe you are looking for