Choose the key from the allowed namespace

Hi All,
I am using SAP HR practice system and I am getting this error "Choose the key from the allowed namespace" while trying to Define Generation rules for Quota type selection in Time Management.
Error message as below; Can some one please guide me how to resolve this.
I also tried saving without clicking on save or green button but by pressing enter nothing worked.
Choose the key from the allowed namespace
Message no. SV019
Diagnosis
You have attempted to create an entry and have used a key which is not in your namespace.
This can cause problems in later upgrades because the entry could be overwritten by an import, or overwrite an existing entry.
Procedure
Check your entry and try to enter a key value from your namespace.
You can display the namespace definition with RDDKOR54.
If you must use the key entered, document your change so that it can be repeated after an upgrade or release change if necessary. If you put the data in a change request, you can export it before an upgrade or release change, and import it again afterwards.
Best Regards
Raskii

Raskii,
When you are trying to clear a warning message in SAP, press enter. That's not intuitive. The natural tendency is to continue to press save.
So the sequence of events is:
- change the data
- press the save button
- receive a warning error message
- press enter, and continue to press enter until you are notified that the change has been saved
This will work if it's truly a warning message.
Regards,
Howard

Similar Messages

  • DST - Choose the key from the allowed namespace

    Hi everyone. I am trying to add the new Timezone setting as per note 919538.
    When I do, I get a message "Choose the key from the allowed namespace". Another search in OSS said that this can only be correct with a support pack.
    Does anyone else have experience with this or seen this error?
    Thanks!

    Re: DST - Choose the key from the allowed namespace  
    Posted: Mar 6, 2007 6:36 PM   in response to: Galina Savikovsky           
           Click to reply to this thread      Reply
    Hi friends,
    The problem is , may be you are all trying to click " SAVE" after doing all the entries.
    1. Do all the entries
    2 Click Enter ( or) that green tick mark on the top left corner next to the place where we put the TCODE.
    You will get the transport request for the change you have made
    Hope this helps, points are appreciated
    Uday

  • Allowed Namespaces for the infotype subtypes

    Hi,
    I am creating a subtype as RFID with a time constraint 2 for IT0105. When i was saving the same, the system prompted a message as :  "Choose the key from the allowed namespace". It was just a prompt and the system allowed me to save the record successfully.
    Would just lke to know if there will be any implications of this on any other functionality further. Can someone let me know the same.
    Thanks in Advance.
    Suresh

    It should not create any problem.......
    This message is coming might be SAP has Repository Name space and this word is not available in that repository.
    Standard Repository Name spave for PA is "/1PAPA/" .
    Mohan

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • Is there any  way to incorporate elements from the 2006 namespace in an application that uses the 2

    I have a desktop app built in AIR using the 2009 namespace.  Is there any way to incorporate any of the of the xmlns:mx="http://www.adobe.com/2006/mxml" components into it? 
    Or better yet, since the AIR namespace is sort of layered on top of the spark namespace, is it possible to do the same with the 2006 namespace?

    xmlns:mx="library://ns.adobe.com/flex/mx"  is the spark mx address, which is completely different than the original 2006 mx library. 
    The thing is:  I love AIR, hate spark, loved the 2006 pre-spark functionality.  It is so much more convenient and user friendly.  Given the choice between having the display seperate from the  processing, or having it be convenient and easy  to work with, I choose the later option.
    For the most part it seems like the AIR api is like a layer on top of the spark - flex system..   I would like to be able to over lay the same AIR functionality on top of the the old system....
    Possible or no?

  • Choosing a folder from the hard drive

    Hi
    I need to allow the user to choose a directory to save a logfile to from a Business One form that should get launched when they click on a browse button. I have currently got the below code which is located within the the ItemEvent.
    Dim FolderWindow As New Windows.Forms.FolderBrowserDialog
    FolderWindow.RootFolder = Environment.SpecialFolder.MyComputer
    FolderWindow.ShowDialog()
    The FolderBrowserDialog window does appear however there is nothing shown where the folder directories should be so therefore not allowing for a directory to be chosen. If I however copy the exact same code and place it into the sub Main for example it works OK.
    I've had a look around the forum and theres a couple of people who look as if they've also had this problem but there's no fixes given. Does anyone know why the folders aren't being shown or another way I can allow the user to choose a directory from the Hard Drive?
    Thanks
    Steve

    Hello Steven
    In the last year i have published a solution in c# and vb.net which is working properly.
    you can donwload a simple source from:
    http://www.progi-tech.hu/ShowFileOpenDialog.zip
    before you call the browser window, you can tell the .NET to Acess to the filesystem by the following .NET code
    Dim f As New FileIOPermission(PermissionState.None)
    f.AllLocalFiles = FileIOPermissionAccess.AllAccess
    Regards
    J

  • How to retrive Exchange product key from the Installed Exchange Servers

    How do I retrieve the Product key from an existing installed exchange servers.

    Right. Think of the security implications if you could just grab the key from the software itself.
    Do any software products allow that?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How to setup to trigger an event when choose the value from cookie

    Hi,
    I define an firepartialaction event for the messageTextinput, this event can be triggered when the user key in the via keyboard. but failed to be triggered when the user choose the value from the cookie. How to setup or program to trigger the event even the user choose the value from the cookie?
    Best Regards,
    Jiang

    Hi,
    so the next missing information is what the event is that you expect to fire. If the cookie value is displayed in a list then John is correct and you populate the input field behind the scenes in which case e.g. no ValueChange listener fires or autoSubmit action is issued as you don't update the data through the UI component
    Frank

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • When opening up Firefox, I kep getting a message: Firefox kept this page from reloading". My home page opens up but some other websites do not open until I hit the "allow" but. How do I remove this or adjust this?

    My home page opens up fine, and there is a message, " Firefox kept this page from automatically reloading", and this same message shows up all the time. When I got to new websites, they will not open until I hit the "allow button" How do I turn this on or off, or adjust it?

    Go to Tools --> Options.
    In the Advanced tab go to "General". Uncheck the check box "Warn me when websites try to redirect or reload the page"

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

  • End User will build the report by himself by choosing the columns from tabl

    We are using Oracle 10g Application server (Forms and Report Services), Forms and Report., our most urgent requirement is End User have to build the required reports by him Like wizards style, (Example Adhoc, MIS reports)., More clear, from the form we want to show all the tables structures, queries, after that end user will choose some columns from the form and specified the condition by himself to run the report after that he will press start button , then automatically report has build for the selected columns from the end user., and this report is parmanent afterwords., he can use any time.
    Like this kind of report building is possiable , anyone has faced same situation.

    Yes it is.
    In BW, this can be achieved by using document management. The option will be available to the user via context menu in the report (goto-->documents - text/pdf/img etc). In your case user can choose to create/change/display a 'text' document, which will be attached to the report.
    cheers,

  • How do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

    how do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

    Where is this example spreadsheet? Without seeing it I can only guess at what you are asking.
    To make a drop-down list (a pop-up menu in Numbers-speak), format the cell as a pop-up then edit and add to the list of items.
    If the example spreadsheet is pulling in a dollar value based on what car you chose in the pop-up, it is probably using LOOKUP or one of the other lookup functions, getting the information from another table (a lookup table). If, instead, these dollar values are what you are choosing in the pop-up, then you need to create a pop-up with these values in it.
    The Help menu includes a link to a page where you can download the Numbers Users Manual. It also has a link to the Formulas and Functions guide. Both are useful to new users.

  • HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

    How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
    The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

    Try Settings>iCloud>Storage & Backup>Change Storag Plan.  If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

Maybe you are looking for