Choosing 2 tracks at the same time

If I want to move 2 tracks at the same time, how do I do it?
THANKS

Rearranging where things go in a song. For example, I am adding a drum solo before the song starts and I dont want t have to move each individual track.

Similar Messages

  • In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    scottiewade wrote:
    Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
    Hi
    Wrong..
    To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
    Make sure that you have turned off Group Clutch (this disables all Groups)
    Maybe this will help
    http://support.apple.com/kb/VI248
    CCT

  • Multiple Inst tracks recorded @ the same time

    I AM TRYIN TO RECORD TWO INST TRACKS AT THE SAME TIME USING TWO SEPERATE MIDI DEVICES. IS THIS POSSIBLE, AND IF SO HOW IS IT DONE ?
    THANKYOU.

    Ok, let's try step-by-step.
    I'm assuming you already have in the arrange window two instrument tracks for Inst1 and Inst2 such that you can play/record each instrument individually.
    Now proceed as follows
    1. Open the environment and choose the Audio layer. From the New menu choose the Channel Splitter. It appears on the window. Make sure that its Icon box is checked in the parameter box. Then draw cables from output1 to Inst1 and output2 to Inst2.
    2. Open the arrange window. Create a new track. Click and hold the track name, from the popup menu select (Channel Splitter). Voila, now we have the channel splitter track!
    3. Make sure the channel splitter track is selected.
    4. Make sure your midi devices are sending on midi channels 1 and 2.
    Now you should be able to play and record both devices at the same time. The recorded notes will first appear on the channel splitter track. After recording select the region and apply 'Demix by Event Channel'. This will create two new tracks containing the recorded notes of each instrument. For playback drag both regions to the original instrument tracks.
    Good luck! Feel free to ask if something doesn't work as expected.

  • Preview multiple video tracks at the same time.

    This may have already been covered at some point on here but I was unable to find it. Please forgive me if it has.
    I'm editing a 2 camera presentation for a company. I've laid both cameras in the sequence. Camera 1 is on V1 and Cam 2 on V2. They are in sync and ready to go. My questions is, "Can I preview or monitor both tracks at the same time as if I was switching this live?" I want to be able to preview cam 1 at the same time cam 2 is playing on the canvas so I know when to cut V2 and switch to V1. Is this possible to do in FCP? Thanks in advance for any help you can give me.
    Thanks!
    Mike

    It's not your only option, though you could do that if you wish.
    You can still finish the edit with multiclip...(provided your clips are still in sync)
    With your playhead at your last cut point, option-click on V1 to activate it's track selector as the only one active, then hit the 'f' key (this will load clip one in the viewer at that point in time). Set an inpoint on clip 1, the do the same for V2 (clip 2)
    Next select both clips in the browser and hit control-click / Make Multiclip. Choose 'Synchronize using: In Points', click ok.
    Now dbl-click the new multiclip in the browser, make V3 active and hit F-10 (overwrites the multiclip onto V3)Next, dbl-click the V3 multiclip in the timeline, go to the top/center button of the viewer and set the Sync to 'Open'. Then, single-click in an open space in the timeline, place your playhead at the head of the new V3 multiclip and hit the space bar. You should see both clips rolling in sync in the viewer.
    Check the manual for Multiclip button bars and any additional settings like activating 'Multiclip Playback'.
    K
    PS - you might want to duplicate your working timeline to test this procedure, then you can always delete the old clips and drop your V3 multiclip on to V1 to finish the edit.

  • Is there a way to see or play two video tracks at the same time?

    I have video shot using two cameras at the same event.  If I take the video and put it in a sequence, say video1 and video2, how can I watch both tracks at the same time so I can edit them?  I tried using multi-camera monitor and have that show video1, while watching video2 in the right hand panel, but it doesn't work very well.  By that, I mean the multi-camera monitor does not play at the same time.  Instead, it stops, then when I play the other monitor it is still until I stop the other one.  Then, it "catches up".  If I play the multi-monitor, the other one is still until I stop the multi-cam monitor.  So, anybody have a better solution that I can use where they both play at the same time?
    BTW, my hardware is brand new and I have a 6-core i7-3930K processor with 16 GB of memory, so I don't believe the problem is with my hardware not being enough to run PPro 5.0 correctly.

    "adobe multicam tutorial"
    http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

  • How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

    How can I record an Audio Instrument, and listen to a reference track at the same time?

    Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
    If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
    Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

    Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

    i am sorry, guys, but  I really really really need you guys' help. if u know ANYTHING...

  • Help with recording 2 tracks at the same time

    Basically I recently purchased an Audio Interface (BEHRINGER XENYX Q802 USB) and I'm having trouble recording multiple tracks at the same time while using it.
    When I set up 2 MONO tracks in my DAW (one using input 1, the other using input 2) all that happens is that I get a recording of one mic over both tracks in my DAW.
    This is probably a beginner post and I have looked it up on YouTube etc. but it just doesn't work for me... Maybe it has something to do with my Interface, but any help will be much appreciated.

    Hi Pancenter,
    Unfortunately I don't have the manual as I purchased it from a friend who failed to provide me with the Manual.
    But thank you for answering as this was what I needed to do.
    Many thanks
    Olie.

  • Why cant I see BOTH video tracks at the same time?

    I read all the manuals,I swear.
    I make film collage and want to do multiple layer exposures of different clips.
    So far I just have two video tracks-
    Why cant I see BOTH video tracks at the same time,I mean each track will create another layer,or exposure that will both play back viewable simultaneously right ?Or would that be considered "layering"?
    Does this have anything to do with the source vs. destination thing ?

    FCE plays back video tracks in a "top-down" manner: that is what's on track 3 obscures what's on track 2 which obscures what's on track 1. You can control scale, position and opacity of each clip on each track so that you can get the layering you seem to be after.

  • How do i record 2 tracks at the same time.

    i use a mixer to hook my mics into garageband, what i want to do is have 2 separate tracks and have them able to record at the same time. ive made separate tracks for each mic but i can only highlight one at a time to record so i need to figure out how i can have both tracks highlighted and giving me levels. if anyone can shed some light on this for me that would be great. i get the feel like theres a simple solution to this.

    Nik324 wrote:
    i use a mixer to hook my mics into garageband, what i want to do is have 2 separate tracks and have them able to record at the same time
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Is is possible to open event lists from different tracks at the same time in Logic Pro 9?

    Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9?
    When I switch between tracks the event list swiches as well. Thanks in advance.

    If you deselect the litte chain link icon in the event list window, it will no longer follow your region selection and you can openas many as you need. Also you can select multiple regions and see the inthe SAME window if you select to show multiple regions, and you can have the notes shown in their respective track colors.

  • Can I change all the outputs on all the tracks at the same time?

    When switching from my home with my interface (output 3-4) to somewhere else where I don't have my interface, I have to change each track individually to output 1-2 so I can hear it. It takes forever because I have several tracks. Can I do them all at the same time?

    with the mixer window open, highlight all the tracks, you do this by clicking and dragging over all of them, or hold shift and select each one. now your tracks will be temporarily linked.. and what ever you do to one track will effect all of them. Cheers.

  • Mulitple controllers and multiple tracks at the same time

    I have multiple keyboard controllers and rack modules. I would like to have each of them individually control their own midi tracks(connected to external rack modules) at the same time, so I can record live performances. Right now I create a track set the port and channel and I can play the desired external module one track at a time, but the second I try to use more than one controller they all play the same module.
    I come from Pro Tools.... and in that program for each channel I am able to select an input port/channel and an output port/channel and it works fine, but in logic I can't seem to select an Input port/channel for the individual tracks, they all seem to be the same. Where or how would I do this so I can streamline my setup?

    http://discussions.apple.com/thread.jspa?messageID=8065879&#8065879
    Eddie

  • Change the resolution for more files/tracks at the same time?

    Hello,
    we are now recording about 1000 LP to 32 bit (float) resolution for our archive, but for our and public use we will need 16 bit resolution. Is there any possibillity to change the resolution for more (for example 100 files) at the same time?
    IASA recommendations:
    http://www.iasa-web.org/tc04/introduction-first-edition
    »It is recommended that all audio be digitised at 48 kHz or higher, and with a bit depth of at least 24 bit.«
    Thank you.

    Sure
    Go to edit view select File->Batch Processing.
    Then select your files and resample settings
    Too easy.

Maybe you are looking for