Choosing a DVD burner replacement

I would like to ask Steve Grisetti (and Chuck) and other members of this Forum to assist me in replacing the original DVD burner (internal) On this Dell Dimension 4700 5 year old computer. (8x21w61, Windows XP) The cable is a ribbon cable that connects to both dvd drives. I am not clear because there are so many configurations as to what to buy. Circuit City is one good source as it seems and I would like to find a good burner fo $40-$60. Here is one (SATA) that I have looked at. Please include any good links that could/would assist me. Thanks http://http://www.circuitcity.com/applications/searchtools/item_upsell.asp?EdpNo=4665188

I would not have a Sony burner at the top of my list, based on tests, where they were never a top-contender for a podium place, contrary to LG, Samsung and possibly Pioneer. Anyway, since they are so cheap nowadays, it does not really matter what the price is, it is more about compatibility with different formats, reliability and burn results. From that perspective in PATA burners, my preference would definitely be Samsung.

Similar Messages

Qosmio G10 DVD Burner replacement

My DVD Burner failed out and needs to be replaced. It's a UJ-831S. I bought the same one but I got a CD-ROM Error at start up. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD Burner (c-select, master....). Do you know if can change the firmware of my DVD Burner ?
Thanks in advance,
Alain

A released firmware that is BRAND specific (like the one I have attached... (TOSHIBA OEM)) is made to run on a Toshiba model and has been configured with the correct Cable/Master/Slave settings. As you might already know, notebook CD-drives control the required CSM settings through the Firmware that is programmed on them rather than through a "jumper setting" like on desktop versions.
(The other improvements that are mentioned in the firmware documentary are irrelevant for us,... the important note that was meant to be read is the COMPATIBILITY statement to the G10 requirements)
I made several drives work on different notebooks after applying similar firmware upgrades like this one, and (to me) this would be the normal way to go in case I bought a drive with different settings than my notebook's requirements.
The only difficult part in the whole procedure is "WHERE to find a notebook?" that has access to the CD-drive BEFORE you apply the new firmware with the changing CSM setting. In our case, he does have access to the drive on a friends notebook, so he could easily apply the upgrade on his own.
I don't want to encourage anybody to do something he is not familiar with, therefore (for the sake of remaining in safe territories and keep the adrenalin levels normal during the flashing process) the best would be exchanging the drive with a "compatible manufacturer pre-flashed with correct settings" drive.
The procedure I describe should work, but is only meant to be followed by a person, who is taking up ALL RESPONSIBILITIES ON HIS OWN to proceed with this. My part in this thread is only to discuss and explain the process (and concept) of using this specific firmware upgrade that also changes the CSM.
Regards,
electrochain

Satellite 1730CDT, DVD burner replacement

Hi,
is it possible to replace the cd-rom drive with a DVD burner?
Does this notebook support "cable select"?
Guenter.

Hi,
normally you can only replace the existing drive with the same one, but you can check http://www.toshiba-europe.com/storage and look if a DVD burner would fit!
You should know which drive do you have!
Bye

Can i replace the dvd burner with a second hard disk in my pavilion dv6 6915nr?

Can I remove the dvd burner and replace it with a secondary bay hard disk?

Hi,
Yes you can, you need something like this to hold the HDD (or SSD):
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=289
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Choosing an external DVD burner all the time instead of the built in burner

I have the Superdrive but prefer to use the external DVD burner to save wear and tear on the Superdrive. When I pop in a blank DVD to burn, the drop down menu appears and I have to manually click on the external DVD burner. Is there something in the system preferences that I can click so that the external burner shows up and not the Super drive?

This is our resident iPhoto guru, Terence Devlin's, advice:
You can move your iPhoto Library to an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Once that is done you can import directly into the iPhoto library on the external HD.

Replacing a dvd burner

I have a HP Pavilion dv6-6c54nr, Windows 7 64 bit. I have some experience with desktops but I have never opened up a laptop. My dvd burner needs replacing, I'm told it will have instructions, hopefully they are good. Any pointers? Thanks.
This question was solved.
View Solution.

This is your maintenance and service guide: http://h10032.www1.hp.com/ctg/Manual/c03099531.pdf
Use it well! It has detailed instructions with step-by-step diagrams in case you get lost.

Replace W520 Sony Optiarc AD-7710H DVD Burner with Sony Optiarc BD-5750H Blu-ray Burner?

I am planning on replacing the DVD burner which shipped with my W520 (4270CTO) with a Blu-ray burner. Evidently not all W520s ship with the same drives.
Does anyone know whether the front bezel on the W520 is the same for the two Sony Optiarc drives mentioned above? If not, which Blu-ray burners can accept the W520 front bezel from the Sony Optiarc AD-7710H, which is the drive my machine shipped with?
Thank you!
W520, Intel QM67 Express Chipset, i7-2760QM, 1000M NVIDIA GPU 2GB DDR3, 1920x1080 FHD LED, 16GB Corsair Vengeance PC3 12800, Intel Centrino Ultimate-N 6300, Samsung 840 Pro 256GB SATA 3 SSD, Sony Optiarc BD-5750H Blu-ray Writer, Dual-Mode DisplayPort.
Solved!
Go to Solution.

I think you swap the bezels. I did with mine.

Blu ray burner replacement for Envy 17 dvd burner

Hi All,
I would like to replace the DVD burner in my Envy 17 laptop with a blue ray burner, if possible. The DVD burner model is HP GU70N. Does anyone know if that can be done, and if so, suggestions on burner model, etc.
Envy 17, E0K85UAR#ABA 17-J013cl
Thanks in advance for any help.
Paltroon1

Hi @paltroon1
Welcome to the HP Support Forums!
In answer to your question about Blueray writers comaptible with your model, I attach a copy of the:
HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC - Mainten...
On page 55 in the section on replacing the optical drive it shows the following as one of the options for this notebook.
Blu-ray Disc Read/Write with SuperMulti DVD±R/RW Double-Layer Combo Drive 720247-001
Also you can look at the following if you wish to order one.
HP Notebook PCs - Ordering HP Certified Replacement Parts
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

MBP july 2009, replacing the dvd burner UJ 868

Any suggestion about with what replace the uj 868? is the 898 ok or please something else?

You should be able to replace that drive with any slimline (Notebook Style) "Slot loading" CD/DVD burner available, which there is a very small selections.
All modern CD/DVD drives have the exact same connections, power and data, in the exact same physical place on the drive case.
But it must be the same type of drive. Type meaning the data interface, SATA or PATA. More then likely yours is a SATA as PATA went out of use 6+ years ago.

DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

There is only one option and that is to replace the drive. It is not expensive to perform the replacement yourself if you so choose.

Need recommendation for external DVD burner drive!

I'm one of the officers for a film club at the University of North Carolina at Wilmington. Recently, I discovered that we had, in our offices, a fully-functional, if not somewhat dated, iMac G4. After getting the neccessary OS X upgrades (it's now running the latest version, 10.4.8), I need to upgrade the CD drive, which is currently just a CD burner drive. It can't even play DVDs, much less burn them, both things we need to have working if we want people in our organization to be able to use this computer.
Since I don't want to physically remove the drive and replace it with an internal DVD burner drive, I'd like a recommendation for a good external one. I noticed that there's only one option on the Apple Store, the LaCie d2 DVD+/-RW Drive, and that doesn't look like it's been getting very good reviews. Does anyone have any other options I could choose from?
iMac G4 Mac OS X (10.4.8)

Good point Keith.
I have no experience of this model but this one from OWC (a company who get very good press on these boards) promises iDVD 5 and 6 support. It's somewhat cheaper than the Lacie in the Apple store but doesn't have Lightscribe.
mrtotes

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

My DVD burning problems solved....here's what I did.

Like some of you, I was having MAJOR problems burning DVDs. My initial setup was a dual 2.0 ghz G5 purchased in July of last year, so it came with a 8x burner and iLife '04 (iMovie 4.0.1 and iDVD 4.0.1). Seeing as how I have 1.5gigs RAM and a fairly new system running 10.4.3, I didn't think I was going to have any problems burning DVDs....
HA.
Nothing worked right......a 1-hour long project burned for more than 8 hours without finishing, or iDVD would quit for no reason, or the burn would fail. I noticed that Terminal said that during these burns it was only burning at 4x even though 47x was requested. Chapters were not working. Applecare was not helpful, only suggesting that I try to burn under a new user, and then call them back. That didn't work either.
I probably took the lazy man's way out, but I decided this waste of time was unacceptable. I went out and purchased a 16x SuperDrive Pioneer DVR-110D replacement from MCE for $92, and upgraded to iLife '05 for another $79. I installed the drive myself (VERY easy with the included instructions), and tried the new setup under a newly created user.....
PERFECT burning every time. Not only that, but Terminal showed a requested burn speed of 16x and a burn speed of 16x. A two-hour project is now burning in less than 8 minutes. Multiplexing still takes time, but it's less than 1 hour!
On an interesting side note: when I try to burn under my regular user name, I STILL get an burning error (says image not complete, or incomplete....something like that). But under the user name created just for burning I have no problems. The chapter problem was solved when I stopped putting a chapter marker at the very beginning of my iMovie projects, since iDVD automatically puts one in called "Beginning," which you can change to anything you want.
Maybe this will help others.....
Dual 2Ghz G5 Mac OS X (10.4.3) 1.5 gigs RAM, iMovie 5.0.1, iDVD 5.0.1

it was only burning at 4x even though 47x was requested.
That's a issue discussed in the past.
It turns out that 8X DVD burning means about 47X CD burning - you were requesting 8X DVD but only got 4X DVD burning.
I haven't seen it discussed anymore so maybe Apple got around to eliminating that 'quirk' in terminology.
I suspect some of the early 8x DVD burners didn't perform as advertised. I'm glad your new 16X burner is working for you.

ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

G5 DVD burner error message? Help please?

I get this error message when I try burning a 1gb quicktime movie to dvd on my pre installed standard burner. Thanks in advance
the link below is a screenshot of the error
http://www.darkstargraphics.com/dvd_message.gif
Im at a loss and ready to by another
below is the dvd burner profile
PIONEER DVD-RW DVR-106D:
Firmware Revision: A606
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

The error "internal target failure" appears on PCs using this drive as well, so it appears that it's not a Toast specific error.
However, in my browsing, no one seemed to be able to tell if it was a true hardware failure of the drive, or if it was caused by poor quality media.
I'd try other brands of media and a lens cleaner before flashing the firmware. And, if you do decide to flash the firmware, the current, official firmware for that drive is here. The link in MLCinma's post contains hacked (region free) firmware and is outdated in any event.
Let us know what brand of media you're using and what speed you're burning at.
The DVR-106D has had lots of reports of failures, so it could very well be the drive. At least a replacement DVR-111D will only cost you about $40 - $50.

Choosing a DVD burner replacement

Similar Messages

Maybe you are looking for