Choosing a highly-available, networked file system for VM images

What's the consensus here on highly-available, networked file systems for VM disk images?
HA-NFS seems difficult and overly-complicated.
GlusterFS doesn't seem to be well-suited for this task.
Ceph/RADOS seems popular but there isn't much information available.
OCFS2 seem to be suitable but there also isn't much information available.
Eric P.
Truckee, CA

Actually, I still would suggest taking a closer look at what I had mentioned in your other thread:
[Use OCFS2 to Share Local Storage (DAS) Across OVM Compute Nodes|https://forums.oracle.com/forums/thread.jspa?threadID=2438632&tstart=0]
I still think that this would also solve thus thread. In the end, there is no how-to on how to build that up and you probably will need some help from some experts. I for myself, also didnÄt configure all of that on my own - i left ASM/Cluster part for some contractor to setup and focused on the iscsi-target/initiator setup along with the multipath setup on m VM servers.
Maybe I will do a little write-up, once we get it all sorted out, since we do experience some strage behaviour of our storages boxes, while ASM hammers ob them quite hardly, but I suspect the raid controllers to blame and not the concept… ;)

Similar Messages

  • Client for NFS fails to restart - Event ID: 16387 - Windows(R) failed a request to initialize the Network File System (NFS) redirector

    I have seen this issue out there in a few threads but a definitive solution has not been posted by Microsoft that I can find. So here is the simple answer. The long answer why this doesn't work on a default install of MSNFS is going to have to come from
    Microsoft and should be in the form of a hotfix.
    Problem Description
    On boot, Client for NFS starts and remains running. If an attempt is made to restart the service from the MMC or nfsadmin, an error occurs and nfsclnt fails to start.
    Event log error:
    ==================================================================
    Log Name:      Application
    Source:        NfsClnt
    Date:          7/7/2011 2:39:51 PM
    Event ID:      16387
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      myserver
    Description:
      Windows(R) failed a request to initialize the Network File System (NFS) redirector
    <[d:\w7rtm\base\fs\remotefs\nfs\client\nfsclient\service.c:199] : 0: The operation completed successfully.
    >.
      Client for NFS cannot start.
      Windows may be low on system resources.  Try increasing available system resources by closing programs, then start Client for NFS manually.
    ==================================================================
    PROBLEM CAUSED BY: When shutting down Client for NFS using the Services GUI, Client for NFS Redirector is not shut down
    SOLUTION: Stop NFS Redirector - 'sc stop NfsRdr' - Then start NFS client service - 'nfsadmin start client'
    Use 'nfsadmin client stop' to correctly shut down both the Client for NFS service and the Client for NFS Redirector.
    'Network File System (NFS) redirector' is actually "Client for NFS Redirector" and not listed as a service even though "Client for NFS" requires it.  
    Using 'sc', details on the hidden NfsRdr system component can be queried and then used to stop the redirector so that nfsclnt.exe can reload it on start up using the Services GUI.
    C:\Windows\System32>sc GetDisplayName NfsRdr
    [SC] GetServiceDisplayName SUCCESS
    Name = Client for NFS Redirector
    C:\Windows\System32>sc qdescription NfsRdr
    [SC] QueryServiceConfig2 SUCCESS
    SERVICE_NAME: NfsRdr
    DESCRIPTION:  Kernel-side part of Client for NFS. Enables a Windows based computer to access NFS server shares
    Hope this thread is helpful !!

    Thank you for your sharing and this will certainly help others have similar issues in future.TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • Cloned volume gets stuck at boot "Waiting for Network File System"

    I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
    Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
    When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
    I am not trying to run from a remote or network drive, just a 2nd drive in my
    G4 from which I have previously been able to boot (until this last clone attempt that is).
    I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!

    Hi Kool,
    So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
    If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
    So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
    Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
    Bo

  • Want to access network file system using JFileChooser

    Hi all,
    I want to access and display the drives of a network file system in the JFileChooser dialog. For example by specifying a machine name, I want to access the drives(C, E, F....) of that machine. Can anyone please guide me on how to go forward with this.
    Thanks in advance

    Any links or guidance provided would bhi helpful

  • Confusion with OCFS2 File system for OCR and Voting disk RHEL 5, Oracle11g,

    Dear all,
    I am in the process of installing Oracle 11g 3 Node RAC database
    The environment on which i have to do this implementation is as follows:
    Oracle 11g.
    Red Hat Linux 5 x86
    Oracle Clusterware
    ASM
    EMC Storage
    250 Gb of Storage drive.
    SAN
    As of now i am in the process of installing Oracle Clusterware on the 3 nodes.
    I have performed these tasks for the cluster installs.
    1. Configure Kernel Parameters
    2. Configure User Limits
    3. Modify the /etc/pam.d/login file
    4. Configure Operating System Users and Groups for Oracle Clusterware
    5. Configure Oracle Clusterware Owner Environment
    6. Install CVUQDISK rpm package
    7. Configure the Hosts file
    8. Verify the Network Setup
    9. Configure the SSH on all Cluster Nodes (User Equivalence)
    9. Enable the SSH on all Cluster Nodes (User Equivalence)
    10. Install Oracle Cluster File System (OCFS2)
    11.Verify the Installation of Oracle Cluster File System (OCFS2)
    12. Configure the OCFS2 (/etc/ocfs2/cluster.conf)
    13. Configure the O2CB Cluster Stack for OCFS2
    BUT, here after i am a little bit confused on how to proceed further. The next step is to Format the disk and mount the OCFS2, Create Software Directories... so and so forth.
    I asked my system admin to provide me two partitions so that i could format them with OCFS2 file system.
    He wrote back to me saying.
    *"Is what you want before I do it??*
    */dev/emcpowera1 is 3GB and formatted OCFS2.*
    */dev/emcpowera2 is 3GB and formatted OCFS2.*
    *Are those big enough for you? If not, I can re-size and re-format them*
    *before I mount them on the servers.*
    *the SAN is shared storage. /dev/emcpowera is one of three LUNs on*
    *the shared storage, and it's 214GB. Right now there are only two*
    *partitions on it- the ones I listed below. I can repartition the LUN any*
    *way you want it.*
    *Where do you want these mounted at:*
    */dev/emcpowera1*
    */dev/emcpowera2*
    *I was thinking if this mounting techique would work like so:*
    *emcpowera1: /u01/shared_config/OCR_config*
    *emcpowera2: /u01/shared_config/voting_disk*
    *Let me know how you'd like them mounted."*
    Please recommend me what i should convey to him so that i can ask him to the exact same thing.
    My second question is, as we are using ASM, for which i am gonna configure ASM after clusterware installation, should i install Openfiler??
    Pls refer the enviroment information i provided above and make recommendations.
    As of now i am using Jeffery Hunters guide to install the entire setup. You think the entire install guide goes well with my enviroment??
    http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
    Kind regards
    MK

    Thanks for ur reply Mufalani,
    You have managed to solve half part of my query. But still i am stuck with what kind of mount point i should ask the system admin to create for OCR and Voting disk. Should i go with the mount point he is mentioning??
    Let me put forth few more questions here.
    1. Is 280 MB ok for OCR and voting disks respectively??
    2. Should i ask the system admin to create 4 voting disk mount points and two for ocr??
    3. As mentioned by the system admin.
    */u01/shared_config/OCR_config*
    */u01/shared_config/voting_disk*
    Is this ok for creating the ocr and voting disks?
    4. Can i use OCFS2 file system for formating the disk instead of using them as RAW device!!?
    5. As u mentioned that Openfiler is not needed for Configuring ASM... Could you provide me the links which will guide me to create partition disks, voting disks and ocr disks!! I could not locate them on the doc or else were. I did find a couple of them, but was unable to identify a suitable one for my envoirement.
    Regards
    MK

  • How to create a network file system on a small ethernet lan?

    Hi there,
    Have been wondering about creating a network file system on a small ethernet based lan. i don't know anything about how you do this but figure you need more than a normal external hardrive Many thanks for any responses

    Hi there,
    As far as I understand, you would like to be able to have a central location that all your computers can access and store files?
    If this is the case, and you want to use your lan router, there are many products that do such a thing. These devices are known as "Network Attached Storages" or NAS. They plug into your router like your computers do, and then allow your computers to access hard drives stored in the devices.
    The following link shows some NAS units on the tech shopping site Newegg.
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=124&name=Network-Storag e-NAS
    Hope that helps, and let me know if you have any more questions!
    Elliott

  • EMac won't start up, only gets to "Starting Network File System"

    Would appreciate any help. I'm a novice. Have a 4-year-old eMac that offered updates for Quicktime and iTunes. I let it go ahead. Got to a point where it said to close iTunes before continuing update. I did close iTunes and OK'd to continue update. Right away the monitor became shaded it and said to restart. Now when I turn it off and try to restart, it makes the start-up sound and the circle clicks around and then suddenly stops. Then the blue line fills in until it gets to "Starting Network File System" and then becomes shaded again saying to restart. I did some research and tried holding down the option key while powering on. Now I have a Macintosh HD icon with a blue X, as well as a 3/4 circle w/arrow and a straight line arrow. Any help would be very, very much appreciated. Thank you. kcorbett

    bjadk,
    Welcome to the Apple Discussions!
    If Apple Hardware test is reporting RAM memory errors, no amount of reinstalling, or Disk Warrior, or anything else, will help. The install and repair attempts, sabotaged by bad RAM, would actually corrupt the hard drive worse on each attempt.
    Do you recall how much RAM was in the eMac? Did you get RAM size reports from AHT? Check the RAM slots on the eMac by opening the access door on the bottom (see eMac - Do-It-Yourself). If there are two DIMMS, pull the one in DIMM slot 1 (that'll be the one on the top if I recall correctly). Removing the bad RAM may leave you with too little RAM to actually run the eMac; you can check your eMac model and use that info to order good RAM from Crucial.
    Yet another potential problem comes to mind. If the Mac is three years old and hasn't been used much, has it been largely turned off and either unplugged, or plugged into a surge protector that was itself turned off? It the Mac hasn't been able to draw a trickle current while nominally turned off, the PRAM battery could be drained, which can also interfere with starting up and using the computer. You can use a voltmeter to check the battery while in the battery holder and replace it if it's more than 0.1v below the nominal 3.6v value.
    When AHT gives the RAM a clean bill, use your OS X Install disc to boot the computer and again try Repair Disk and/or use single-use rmode to run fsck (per Using Disk Utility and fsck). IF Repair Disk/fsck report making repairs, repeat that step until it either reports no problems found or unable to repair, since one directory error can mask other errors. As already mentioned, DiskWarrior has an excellent track record of making repairs where Disk Utility could not.
    If Disk Utility or Disk Warrior repair the disk, you can proceed to an Archive and Install (you'll need 5 GB or so free space on the hard drive to do an A&I; if space is tight, use the Installer options to select language support for only the language(s) you actually use).
    If no utility can repair the disk, an Erase & Install with the one-pass write zeros option selected could recover use of the drive, by forcing the drive to update it's record of bad disk sectors to avoid. This would lose any data and programs for which you don't have a backup or install discs, through.

  • Change repository from Network File System to SharePoint

    I have a brand new instance of Unifier 10.1, and have configured it to use the "Network File System" as the repository. I have 3 documents added to the library. I would now like to change the repository to point to an instance of SharePoint. The instructions in the Connecting the Content Repository to Primavera Unifier document were followed, using the SharePoint Connector. It was not setup up by me, but I am fairly confident it is setup correctly.
    When I attempt to upload a document, a very generic error message is displayed, suggesting I try logging out and back in again. Not very useful. In the logs however, I am getting the following error:
    java.lang.Exception: Base path is not set
      at com.skire.dm.utils.FileUtils.createTodaysFilePath(FileUtils.java:869)
      at com.skire.dm.utils.FileUtils.getTodaysFilePath(FileUtils.java:858)
      at com.skire.common.taskdefs.DiskFile.doUpload(DiskFile.java:411)
      at com.skire.common.taskdefs.DiskFile.execute(DiskFile.java:168)
      at com.skire.webant.WebTask.perform(WebTask.java:93)
    Does anyone know what else may need to be configured to switch to using SharePoint as my repository type?
    Has anyone attempted to switch repository types after the initial configuration and addition of documents?
    Any help would be greatly appreciated.

    HI SamoIPP,
    I agree with Alex on analysis and discovery, and also make sure to design the web applications and site collections taking into consideration the size and capacity plan
    check those blogs
    http://blogs.technet.com/b/ptsblog/archive/2013/11/04/migrating-file-shares-to-sharepoint-online.aspx
    http://blogs.c5insight.com/Home/tabid/40/entryid/129/Best-Practice-Should-SharePoint-Replace-Your-File-Servers.aspx
    there are tools like those below and content matrix gives you 25 GB free to move
    http://www.metalogix.com/Products/Content-Matrix/Compare.aspx
    http://sharepointpromag.com/vyapin/file-share-sharepoint-20132010-migration
    http://gallery.technet.microsoft.com/office/The-Migration-Dragon-for-c0880e59
    http://sharepointmetadataandclassification.typepad.com/blog/2009/12/new-file-share-to-sharepoint-migration-utility-from-microsoft.html
    http://www.vyapin.com/products/sharepoint-migration/dockit/sharepoint-migration-tools.htm
    http://www.tzunami.com/products/td-file-shares-migration/
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

  • Network file system

    Hi,
    Can anyone tell me how can I create a program that will allow me to share file between multiple operating systems like windows and linux in a network.Basically I want to create a network file system browser between heterogeneous file systems.

    http://jcifs.samba.org/ May help with Window's shares.
    http://j-ftp.sourceforge.net/ This is a client that supports lots of protocols and is GPL'ed so you can look at the source if you need but be sure you understand the license first.
    I'm not sure if you can get something that works with java.io.File but across the network. I'm pretty sure you need to use something provided by your OS for that. It'd be great if someone proved me wrong on this.

  • Can a BIP report be deliveredto local or network file system

    We have OBIEE 10.1.3.4 installed on Linux Redhat 5.2. We have some reports on BI Publisher and want to save the report to a local or network file system. Not sure if it is possible as save to file system is no list as an option in BIP Admin Delivery list.
    Please help!

    Thank you for help. But is it a way to save the whole report to one file instead split it according to a key.
    One way I can think of is to create a dummy key of a single value. Is there a BIP built-in way doing this?

  • Lucreate - „Cannot make file systems for boot environment“

    Hello!
    I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
    --($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207  -m /:/dev/md/dsk/d200:ufs
    Discovering physical storage devices
    Discovering logical storage devices
    Cross referencing storage devices with boot environment configurations
    Determining types of file systems supported
    Validating file system requests
    Preparing logical storage devices
    Preparing physical storage devices
    Configuring physical storage devices
    Configuring logical storage devices
    Analyzing system configuration.
    Comparing source boot environment <d100> file systems with the file
    system(s) you specified for the new boot environment. Determining which
    file systems should be in the new boot environment.
    Updating boot environment description database on all BEs.
    Searching /dev for possible boot environment filesystem devices
    Updating system configuration files.
    The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
    Creating configuration for boot environment <S10U6_20081207>.
    Source boot environment is <d100>.
    Creating boot environment <S10U6_20081207>.
    Creating file systems on boot environment <S10U6_20081207>.
    Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
    Mounting file systems for boot environment <S10U6_20081207>.
    Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
    Well - why's that?
    I can do a "newfs /dev/md/dsk/d200" just fine.
    When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
    /bin/nawk: can't open file /etc/lu/ICF.2
    Quellcodezeilennummer 1
    Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
    lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
    Would anyone maybe have an idea about what's broken there?
    --($ ~)-- LC_ALL=C metastat
    d200: Mirror
        Submirror 0: d20
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d20: Submirror of d200
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s0          0     No            Okay   Yes
    d100: Mirror
        Submirror 0: d10
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d10: Submirror of d100
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s0          0     No            Okay   Yes
    d201: Mirror
        Submirror 0: d21
          State: Okay        
        Submirror 1: d11
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 2097414 blocks (1.0 GB)
    d21: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s1          0     No            Okay   Yes
    d11: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s1          0     No            Okay   Yes
    hsp001: is empty
    Device Relocation Information:
    Device   Reloc  Device ID
    c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
    c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
    --($ ~)-- /bin/df -k | grep md
    /dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
    Michael

    Hello.
    (sys01)root# devfsadm -Cv
    (sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
    --($ ~)-- sudo env LC_ALL=C LANG=C lustatus
    Boot Environment           Is       Active Active    Can    Copy     
    Name                       Complete Now    On Reboot Delete Status   
    d100                       yes      yes    yes       no     -        
    --($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
                   boot environment name: d100
                   This boot environment is currently active.
                   This boot environment will be active on next system boot.
    Filesystem              fstype    device size Mounted on          Mount Options
    /dev/md/dsk/d100        ufs       16106660352 /                   logging
    /dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
    <code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
    Copying.
    *{color:#ff0000}Excellent! It now works!{color}*
    Thanks a lot,
    Michael

  • Let me know how to run high availability services in system 9 essbase.

    Hi
    Let me know how to run high availability services in system 9 essbase.
    thanks in ADV
    Message was edited by:
    user624564
    Message was edited by:
    user624564

    Hi,
    Now i am using essbase system 9.2 version,
    & URL : http://localhost:11080/eds/EssbaseEnterprise
    plz guide me to download the High Availability servers .
    thanks in Adv....

  • File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

    Hello,
    We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
    All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    If anyone able to help me with required Solaris file system. it will be great help.
    Please let me know if there is any query.
    Thanks.

    > All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    > But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
    > Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    So you'd need to read the installation guides
    Markus

  • Btrfs with different file systems for different mount points?

    Hey,
    I finally bought a SSD, and I want to format it to f2fs (and fat to boot on UEFI) and install Arch on it, and in my old HDD I intend to have /home and /var and  try btrfs on them, but I saw in Arch wiki that btrfs "Cannot use different file systems for different mount points.", it means I cannot have a / in f2fs and a /home in btrfs? What can I do? Better use XFS, ZFS or ext4 (I want the faster one)?
    Thanks in advance and sorry my english.

    pedrofleck wrote:Gosh, what was I thinking, thank you! (I still have a doubt: is btrfs the best option?)
    Just a few weeks ago many of us were worrying about massive data loss due to a bug introduced in kernel 3.17 that caused corruption when using snapshots. Because btrfs is under heavy developement, this sort of thing can be expected. That said, I have my entire system running with btrfs. I have 4 volumes, two raid1, a raid0 and a jbod. I also run rsync to an ext4 partition and ntfs. Furthermore I make offline backups as well.
    If you use btrfs make sure you have backups and make sure you are ready to use them. Also, make sure you check sum your backups. rsync has the option to use checksums in place of access times to determine what to sync.

Maybe you are looking for