Choosing Edit In Photoshop does not carry my develop settings

Hi,
Something awry has happened to my Lightroom. All of a sudden, when I want to open a photo in Photoshop by right clicking and selecting Edit In Adobe Photoshop CS4, I don't get the traditional TIFF file which used to be generated (as in _MG_9999_Edit.tif) with all the changes made to the raw file in the Develop module. Instead, the direct RAW file is opened in PS and it looks TOTALLY DIFFERENT than what I see in Lightroom 2.
What happened?
Thanks in advance,
Juan

Hi,
Yes, thanks. That has always been the behavior but not a couple of days ago. It so happens I had several virtual copies and maybe it wasn't choosing the correct one?
My LR is 2.5 and ACR 5.5
For non virtual copies it works fine.... Can you confirm this?
Regards,
Juan

Similar Messages

LR3 DNG Edit in Photoshop Does Not Open in Camera Raw

I have LR 3.2 64 bit and CS5 v12.0.1 64 bit and Camera Raw 6.2 under Windows 7. I do 95% of my editing in Lightroom. I do occasionally choose "Edit in Photshop" and in the past a DNG or CR2 image opened in Camera Raw (at least I think that is the case). Recently however, I noticed that if I have a DNG or a CR2 file, right click, and select "Open in Photoshop..." it opens the file directly in Photoshop, not in Camera Raw. I have tried deleting my LR3 preference, deleting my CS5 preferences, and deleting both, but the behavior does not change. Does anyone have an idea to explain this?
Thanks,
Alan.

Thanks for the quick response. For some reason I was thinking that it had happened that way in the past, but now that I think about it, I guess there would really be no reason for it to open in Camera Raw. Sorry for the unnecessary question.
Alan.

When in Lightroom 2.3 edit in Photoshop does not bring up image in Photoshop

When in Lightroom 2.3, you go to edit in and select Photoshop, it opens Photoshop CS6 but does not bring the image in. This has only happened recently and maybe I have done something to make this happen as it never used to happen. What can I do to figure this out?

First, update your LR 2.3 to 2.7. The update is free and should help with some things: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4677
If after updating Lightroom, it doesn't start working, initiate a repair install of Photoshop CS6.

Photoshop does not remember my preformance settings.

Hello I have Win XP and using Photoshop CS4, everytime I make a change under EDIT / PREFERENCE / PREFORMANCE/ and set my desired settings, when ever I restart wwindows and check those prefrences they go back to the default mode. But my work stattion is always saved. Is there a check mark some where where it tells photoshop to remember these settings?

Check your user privileges and folder permissions! Clearly it is unable to write to the pref file and only holds the settings in memory while the program is open. In fact the "crashes" Zeno was mentioning might not be the cause, but the result of this issue.
Mylenium

Photoshop 5 edit menu button does not function

The edit menu button does not load the edit page on my Photoshop 5 program. I tried deleting the program and reloading from the disc. I am getting nowhere with that and now I get a message saying that I have use the disc on too many computers.. jjmack answered my earlier question regarding the same issue with a request for more information about the edit menu button.
Harold Bergh

1. Restore requires replacing everything I had on my iPod, right?
2. Do you do anything else other than reply to Discussions, or is there a reward for having this many posts?
3. The problem resolved itself after having been turned off for twenty-four hours.

Downloaded photoshop CS6 to my new iMac. Opened photoshop but can't bring in a photo from iPhoto - get message that says photoshop does not recognize this type file. Suggestions?

I donwloaded photoshop CS6 to my new iMac. Opened photoshop but cannot openn a photo from iPhoto library - I get a message that says cannot complete our request becausse photoshop does not recognize this type file.
Suggestions?
Rick

You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

"Edit In" Photoshop CC not working for RAW or DNG files after applying LR 5.3 and Camera Raw 8.3

I just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
I'm at a complete loss, dead in the water, with a mountain of editing work piling on top of me. Kicking myself for applying the upgrades, which I had been delaying for some time to avoid just such a cluster%#$. Ugh.
I'm on a PC running Windows 7 64bit.
Any suggestions would be greatly appreciated.

In the normal situation, LR needs to see a PS installed for it to detect the Edit In PS option is possible, so if you uninstall both, then install PS, first, then LR. Of course with this release there may be some hiccup that requires installing either one or the other, again, but if you've uninstalled both and are reinstalling both, then install PS, first.

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people :(

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people

There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Photoshop does not start unless I reboot

I have been having this problem since yesterday. Photoshop does not start after I use the computer for a while. I opened Windows Task manager to see if any processes start at all, even though the application does not start. Two processes (1) AdobeIPCBroker and (2) Photoshop.exe process start, but photoshop application does not open , not does it show up in the applications. What may be going wrong?
Arun

domike wrote:useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
Where did you get this idea? This is the problem.
Follow the wiki
Also, you realize everything you are installing and doing only remains in memory. Why are you installing all these packages? Are you going to repeat this installation and user creation at every reboot?
EDIT: something else is wrong too - but until you fix the above, it will be hard to know if it is a separate cause, or an indirect effect. /run/user/0 should not be relevant, but /run/user/1000 should be used. I suspect your method of starting X is logging out of the 'su'ed user and is dropping back to the root login that it is under. You'll likely need to change tty's to log in as your user - on a normal system you could log out of the root session and back in as your user - but on the iso I think autologin for root is set on tty1. Of course you could disable this too.
Last edited by Trilby (2014-05-28 11:44:42)

How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?

Hello!
How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?
So... Quite often I choose to 'Edit in photoshop' from Lightroom but then end up not saving the result. (for example, because I just wanted to experiment with the photo, or I'm not satisfied with the results)
However, Lightroom always creates a copy of the original photo, which stays in the catalog even if the photoshop changes aren't saved.
Is there a way to stop this, and only add a photo if it has been edited in PS?
Using LR5 with PS CS6 on a Mac 10.9
THANK YOU!

Select 'Open the Image in PS as a Smart Object'. The image will be rendered by ACR in memory without being written to disc until you save it from within PS.

Changing animation frame rate when rendering in photoshop does not change the length of the video?

I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it.

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

The edit JSP page does not appear...

Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
               <h:dataTable
                         value="#{myBean.myDataList}"
                         var="myDataItem"
                         binding="#{myBean.myDataTable}"
               >
                    <h:column>
                         <f:facet name="header">
                              <h:outputText value="Ajdi"/>
                         </f:facet>
                         <h:commandLink action="#{myBean.editMyData}">
                              <h:outputText value="#{myDataItem.id}"/>
                         </h:commandLink>
                    </h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
     private List myDataList;
     private HtmlDataTable myDataTable;
     private MyData myDataItem;
     protected Connection Conn;
     // *********************** actions ***********************
     public String editMyData() {
          myDataItem = (MyData)getMyDataTable().getRowData();
          return "editmydata";
     public String saveMyData() {
          try {
               updateDataInDB();
          catch (SQLException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          catch (NamingException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          return "listmydata";
     // *********************** setter ***********************
     public void setMyDataList(List myDataList) {
          this.myDataList = myDataList;
     public void setMyDataTable(HtmlDataTable myDataTable) {
          this.myDataTable = myDataTable;
     public void setMyDataItem(MyData myDataItem) {
          this.myDataItem = myDataItem;
     // *********************** getter ***********************
     public List getMyDataList() {
          if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
               loadMyDataList();
          return myDataList;
     public HtmlDataTable getMyDataTable() {
          return myDataTable;
     public MyData getMyDataItem() {
          return myDataItem;
     // *********************** others ***********************
     public void loadMyDataList() {
          try {
               getDataFromDB();
          catch (NamingException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
          catch (SQLException e) {
               System.out.println(e);
               System.err.println(e);
               e.printStackTrace();
     void getDataFromDB() throws NamingException, SQLException {
          myDataList = new ArrayList();
          java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
          PreStat.execute();
          java.sql.ResultSet Rs = PreStat.getResultSet();
          while(Rs.next()) {
               MyData OneRecord = new MyData();
               OneRecord.setId(Rs.getLong(1));
               OneRecord.setName(Rs.getString(2));
               OneRecord.setValue(Rs.getString(3));
               myDataList.add(OneRecord);
     void updateDataInDB() throws SQLException, NamingException {
          String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
          java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
          PreStat.setString(1,myDataItem.getName());
          PreStat.setString(2,myDataItem.getValue());
          PreStat.setLong(3,myDataItem.getId().longValue());
          PreStat.execute();
          ownGetConnection().commit();
     Connection ownGetConnection() throws SQLException, NamingException {
          if (Conn == null) {
               InitialContext IniCtx = new InitialContext();
               DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
               Conn = Ds.getConnection();
          return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
     <h:panelGrid columns="2">
          <h:outputText value="Name"/>
          <h:inputText id="name" value="#{myBean.myDataItem.name}"/>
          <h:outputText value="Value"/>
          <h:inputText id="value" value="#{myBean.myDataItem.value}"/>
     </h:panelGrid>
     <h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>

I have put his lines in the faces-config.xml and now it works:
     <navigation-rule>
          <from-view-id>*</from-view-id>
          <navigation-case>
               <from-outcome>editmydata</from-outcome>
               <to-view-id>editmydata.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>
     <navigation-rule>
          <from-view-id>*</from-view-id>
          <navigation-case>
               <from-outcome>listmydata</from-outcome>
               <to-view-id>listmydata.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
     public String editMyData() {
          myDataItem = (MyData)getMyDataTable().getRowData();
          return "editmydata";
is it right or Do I make a mistake somewhere?

Could not complete the video frames to layers command because photoshop does not support video in th

When I attempt to import a video I get the message "could not complete the video frames to layers command because photoshop does not support video in this version of windows" I am running on windows 8.1 pro (32 bit), shouldn't this be compatible???????????

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Choosing Edit In Photoshop does not carry my develop settings

Similar Messages

Maybe you are looking for