Choosing x200t for Linux use

Hi!
I'm planning to get new x200t (tablet) and use it mostly with Linux.
Any suggestions on what components are compatible with Linux?
I guess this new and expensive MultiTouch display won't be supported, so I'm getting SuperBright WXGA.
But what about Intel WiMAX/WiFi Link 5350? Or should I get the 5100/5300?
Is AT&T 3G card supported?
Also - any way to order this (or similar models) with Linux pre-installed (and avoid paying for Windows completely)?
Thanks!
Dmitry
DJ
NJ

Hello,
i'm using openSuSE 11.1 on an X200t. Unfortunately, all the tablet-buttons are not working. Has anyone working buttons in use ? What linux-distro is used and were there tweaks to be applied ?
Kind regards,
pepun
X200t

Similar Messages

Choosing oracle for linux ! what are merits and demerits

we are going to choose oracle for linux for our e-commerce site which will serve as search engin and shopping mall.

Thanks cgawoods for the advice...
I followed all the steps that you mentioned... Installing the Oracle client proved to be easy as pie on the Linux server, and connecting to the Oracle instance on the NT server was instantaneous with sqlplus... tnsping also finds the Oracle server without a hitch.
I also made the modifications to the coldfusion start script you mentioned, i.e. setting ORACLE_HOME, etc (which is also mentioned in Allaire's docs).
However.... (yes, here it comes) The DSN still comes up as 'failed' when I try to add a new one using the native drivers in the Coldfusion Administrator.
Do I need to do anything on the Oracle server side (NT) first in order to get things working?
I'm pretty stumped at this point as to why this won't work.
Thanks
DH
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cgawoods ():
I've done Cold Fusion installs on Solaris 2.6, and am an OCP DBA. If you download the Oracle 8.0.5 EE (RedHat 5.2) or Oracle8i EE(Redhat 6.0-6.2) Server programs, you may use the "Server" installation as an Oracle Client. Once you get Oracle installed, you will need to configure the tnsnames.ora file to point to your remote database. Then, you will need to point Cold Fusion to the $ORACLE_HOME where you installed the Oracle Server software. You will want (and probably need) to use the "native" oracle driver for Cold Fusion instead of the ODBC driver. Once the Oracle installation is complete, and you can "tnsping" the Oracle instance on NT, you should be able to configure Cold Fusion to talk to your Oracle database. It's just a matter of reading Allaire's documentation on configuring Cold Fusion for use with Oracle at that point.<HR></BLOCKQUOTE>
null

Can't download oracle 9i for linux using a download manager

where do i download 9i for Linux 64bit???
I need it and I can't find it anywhere.
Please, let me know.
Thanks,
M

MarGur wrote:
where do i download 9i for Linux 64bit???
I need it and I can't find it anywhere.
Please, let me know.Oracle E-Delivery Web site
http://edelivery.oracle.com/
Thanks,
Hussein

Getting an error to order a VM for Linux using a Template

Hi All,
I have tried to submit the order a VM for Linux RHEL6.1.
Portal page is not showing the Administrator Password's "Enter and Renter" tabs on the page and the message showing on the the tab space is as follows:
Important: To set the root password on your virtual machine, please refer to the appropriate restrictions for your Linux operating system flavor.
I have created root password on the RHEL OS itself
I submitted the order after that it is showing the error as follows:
Can any one help me on this how isolate this issue..?
Thank in Advance.
-Noor.

Hello,
Unfortunately there is not enough information here. It is possible that some of the configuration steps have not completed successfully. Without seeing adding screenshots or XMLs it might be hard to answer this question.
Could you please open TAC case? They woudl be able to answer it quickly.
Also, is this question about Cloud Solution or Workplace Solution?
Thanks,
Max.

Sat 3000-601: Needs BIOS for Linux using

hi
I`m searching for a newer or older BIOS for my notebook.
With the 2.30 TRAD Version, I don`t get the nvidia card to work properly with linux, and with the original BIOS it did.
Perhaps there is a diffent solution for this problem, but I like to test it with an old version.
So can anybody tell me where to download it!?
Thanks, Florian

hi Richard
the problem is that, that when the x-server starts the display goes totally black (including the backlight of the display) and that the notebook freezes when I exit the server in any kind (console switching, or when I shutdown) and with certain GLX funktions, used by 3D applications ( I haven't investigated which exactly, because I can't, becouse of a lack of knowledge and becouse the notebook is dead at this point.
So I first tried some tipps from the Nvidia installatoin guide like not using a rivafb-fram-budder-device, or trying some boot options to disable ACPI or to force that the IRQ's are not allocated by the BIOS (which didn't work at all, there where still 5 devices, which shared IRQ 10 and at last I tried so force the Nvidia-module to use its own AGP-device instead the AGPgart-driver in the original kernel.
But nothing helped.
Bye Florian
P.S. I thing ACPI is still buggy within the new BIOS Version

Trying to use 10G for linux

Two Problems
1. I downloaded 10 for linux,
used gunzip
Now I am at ship.db.cpio
I ran cpio -idmv ship.db.cpio
The command never stoped, what did I do wrong ???
Next problem
The 10G for linux state:
I need to change on my linux computer,
sysctl.conf, pam.d/login, limits.conf, profile
There all read only files,
What do I need to do ????
I am using Red hat linux EP. rev 3 newest one.

1. Use cpio -idmv <ship.db.cpio
sysctl.conf, pam.d/login, limits.conf, profileThese are system files : you have to login as root to modify them, or su - root if you are already connected as another user.

Where to download OAS9i V1.0.2.2 for Linux RedHat RH6.2(kernel 2.2.16 or later) use?

So that we may better diagnose problems, please provide the following information.
- Server name:linux1
- Filename
- Date/Time: 2/6/2002
- Browser + Version: Netscape 6
- O/S + Version: Linux RedHat 6.2 (Kernel 2.2.19, glibc 2.1.3)
- Error Msg
I am a member of OTN, and I tried to download and test OAS9i for my platform - Linux RedHat 6.2(Kernel 2.2.19, glibc 2.1.3), and I tried to find the related OAS9i product for Linux use from your site "Oracle9iAS Download Options", but I got a confused about those items, I found v1.0.2.2.1 OAS9i image *.cp file there, but there installation guide itself shows that it is for V1.0.2.2 use,that is for Intel Linux use(Kernel 2.2.14 or later, glibc 2.1.3), however, the image *.cp file which could be downloaded is V1.0.2.2.1, is for Intel RH7.1 Linux use(Kernel 2.4.3-12, glibc 2.2.2-10).
So that's very strange, and I want to know that where can I download the *.cp files for Intel Linux RH6.2 use(Kernel 2.2.19 or later, glibc 2.1.3), my platform is RH6.2 because I heart that Intel Linux RedHat's version over 6.2 doesn't be certificated by ORACLE, so I always use Intel RedHat 6.2 as my basic platform, so who can tell me where to download the imgae *.cp files for my platform use? Or any suggestion?
Thanks in advance!
Best Regards!
Frank

You wrote:
There no longer are standalone upgraders for Safari.
I beg to differ, amigo...
...but you're correct in saying that they're not generally available. You have to know where to find them. Evidently, you don't...and obviously I didn't either, or I wouldn't have asked. But I think I know how to find out where they are now.
Thanks again for your prompt replies.

It is possible for linux version to use the same icons of windows and mac version in the navigation bar?

Firefox for linux uses the gtk theme icon in navigation bar, instead mac and windows uses other (trasparent) icons . I find more beautiful icons used in mac and win. Is there any way to force firefox to use this type of icons?

Have you checked the themes add ons? You may find a "Windows 7" theme or something similar!

In LabVIEW for Linux, cannot link to a shared library file (.so).

Hello all,
I'm having trouble using the Call Library Function Node within LabVIEW for Linux (using Ubuntu). I can configure my Node correctly, and it sees the available function within it with all the proper parameters, but when I close the Call Library Function dialog box it does a quick search and asks me to Find the Shared Library Named "mySharedLibraryName." If I select it again, it merely repeats this over and over until I cancel. Has anyone seen this before or know what is causing this? The .so file was compiled using gcc++ - is there anything specific that should have been included (does it need a header file)? Could some missing file be causing this?
Thanks,
Jason

The elf shared library format is a supported feature of all Linux distributions since about Linux 1.0 or earlier. So it is not really an issue that Ubuntu wouldn't support shared libraries as used by the LabVIEW Call Library Node. Since the Call Library Node seems to be able to see the exported functions during selection of the function it also doesn't seem to be a problem with proper export of the symbols.
This leaves over some dependencies of the shared library on some other shared libraries including C runtime libraries. Was the shared library compiled on the system you try to use it? If not you may have an incompatibility of the C runtime library version used on the system that was used to compile the shared library and your Ubuntu system you try to load it.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Oracle openstack for linux

I want to install openstack for linux using two nodes.
1- Compute Node (Oracle VM Server 3.3.1)
2- Control Node (Oracle VM Manager 3.3.1+ openstack software)
Please tell me the steps how can I install and configure it.

Sorry for late response.
Actually I was busy some other projects
Now I have completed install of Compute Node(Oracle VM Server 3.3.1)
But Control node (oel 6.5) openstack-packstack rpm install was successfull.
Configuration give me the following error
aring servers
[ DONE ]
Installing Dependencies
[ DONE ]
Copying Puppet modules and manifests
[ DONE ]
Applying 192.168.21.48_prescript.pp
192.168.21.48_prescript.pp:
[ DONE ]
Applying 192.168.21.48_mysql.pp
Applying 192.168.21.48_amqp.pp
192.168.21.48_mysql.pp:
[ DONE ]
192.168.21.48_amqp.pp:
[ DONE ]
Applying 192.168.21.48_keystone.pp
Applying 192.168.21.48_glance.pp
Applying 192.168.21.48_cinder.pp
192.168.21.48_keystone.pp:
[ DONE ]
192.168.21.48_glance.pp:
[ DONE ]
192.168.21.48_cinder.pp:
[ DONE ]
Applying 192.168.21.48_api_nova.pp
192.168.21.48_api_nova.pp:
[ DONE ]
Applying 192.168.21.48_nova.pp
192.168.21.48_nova.pp:
[ DONE ]
Applying 192.168.21.48_neutron.pp
192.168.21.48_neutron.pp:
[ ERROR ]
Applying Puppet manifests
[ ERROR ]
ERROR : Error appeared during Puppet run: 192.168.21.48_neutron.pp
Error: Could not start Service[neutron-server]: Execution of '/sbin/service neutron-server start' returned 1: Starting neutron: [FAILED]
You will find full trace in log /var/tmp/packstack/20150419-114625-UwcUPI/manifests/192.168.21.48_neutron.pp.log
Please check log file /var/tmp/packstack/20150419-114625-UwcUPI/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150419-114625.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 192.168.21.48. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://192.168.21.48/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.

LabView 8 for Linux application distribution

I have build an application for Linux using labview application builder.
I now have a app.o file, but the application builder does not create a distribution package (unlike the windows application builder where it creates a data.cab that contains the application and runtime engine parts).
How do I distribute the runtime engine components (or know what they are and where they are)?
How do I tell an end-user how to install my program and the runtime engine?
Note: This application does not interface any hardware. It reads a file using the command line and writes another file.

If the built application does not use any NI drivers, or NI-VISA then the only other component you will need is the LabVIEW Run-time Engine. You can download the version of the LabVIEW RTE that matches the version you built the application with from our download site http://joule.ni.com/nidu/cds/fn/p/sn/n17:runtime,n19:Linux,n23:4/lang/en.
To install your application on another machine you should only need to install the LabVIEW RTE rpm(s) using rpm.:
rpm -Uvh *.rpm
Then copy your binary file your built with the application builder to the new machine and run it.
Shawn Bohrer
National Instruments
Use NI products on Linux? Come join the NI Linux Users Community

Cvi for linux and gtk+

Is there any way that I can manipulate UI window settings like titlebar visible (ATTR_TITLEBAR_VISIBLE) via GTK+ or other toolkit in Linux? Basically, I am trying to manipulate the visual attributes of the UI that are not compatible in Linux such as the titlebar visibility, minimize and maximize buttons hidden, etc...
In windows, I have used the windows SDK to create/manipulate system tray icon menus. Perhaps there is a similar approach in Linux?
Thanks for reading,
-pete
Message Edited by pshrew on 06-02-2010 12:12 PM
Solved!
Go to Solution.

Hi Pete,
After a little more research, I have found that it is possible to modify these attributes, because CVI for Linux uses the X Window System. To do this, you would be able to get a reference to the X Window System attribute by using the function int GetPanelAttribute (int panelHandle, int
panelAttribute, void *attributeValue) with ATTR_SYSTEM_WINDOW_HANDLE for the panelAttribute. From here, you could use X Window System functions to modify properties.
Best,
John M
National Instruments
Applications Engineer

Konqueror browser for Linux has an useful CPU limitation feature for websites using Flash content. Can you add such a feature in Firefox?

I have recently found that Konqueror browser for Linux can help user to limit cpu usage while visiting a website using flash technology by changing settings in the Flash section and adjusting the slider from VERY HIGH settings to HIGH and MEDIUM and so on. It actually works, and it does not have a direct impact on the general performance for flash player but it may generate some conflicts if other extensions such as add-blocker or click-to-flash are enabled also.
Maybe you can add a similar setting in Firefox in the browser option section or just as an useful addon or extension.

Sorry for being late with my reply. I've just tested that addon that you mentioned in your post ( https://addons.mozilla.org/en-US/fire.../system-monitor/ ) , it looks like a system monitor and nothing more than that.
As for the memory tip ( about:memory ) I agree that it can be extremely useful for users that have less than 1 gb memory installed on their system. I know very little about computers but I can tell your tip for optimizing memory usage in firefox has merits.
Me, I have another problem with cpu overload in Firefox, Internet Explorer, Opera and most of the browsers with flash support enabled. Each and every time time I visit a page that features all sort of adds and gadgets based on flash technology, and each time I try to watch a video online my cpu goes all the way up to 100% and stays there until i finally decide to close the browser.
I am running winxp and also linux on a Dell Optiplex GX260 machine with 2000 MHz cpu, 1024 Mib ram and 128 Mib video card, it is not the best computer in the world but still 2000 MHz should be enough for a limited and uneventful web experience.
It is not as much an issue with the web browser, any browser, the whole problem is caused by funny people claiming to be deeply involved with web development, and promoting flash technology for ages instead of choosing other alternatives, more user friendly. All I am saying is that flash ruined the entire web experience making people to believe that they actually need dual-core cpu and coreduo and deepfreeze cpu and so on which is only partially true.
I always get better results for cpu usage when watching online videos that use media player as default player and not flash player, and my cpu stays below 70% usage which is not much but still it is not 100% usage.
Konqueror offered me a nice surprise, and I was able to limit cpu usage once I moved that slider from Very High setttings for flash player to Medium settings. I got something between 80-90% cpu usage as a result, and I was very pleased to finally see a working solution to my problem at least for linux if not for windows.
The only other browser that I can use for windows only, which handles both flash player and cpu usage well is Kmeleon browser which is a long forgotten project but does offer nice features once you find some plugins that it needs to make it come to life again.

How to create a c++ shared library (.so) for linux real time (for myRio) with Eclipse to use in LabView?

I tried already these Tutorials and Advices but I didn't find a solution:
- http://www.ni.com/tutorial/14625/en/
- http://www.ni.com/tutorial/14690/en/
- http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
- http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
- and some more
I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
I've done these steps:
1. writing a c++ file in Eclipse (see screensot 2)
2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
3. putting this file on myRio (path: /usr/local/lib/)
4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
After I run this VI i get this error message: LabVIEW: (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
Perhaps someone can send an example which works on myRIO.
Thanks!
screenshot1
screenshot2
screenshot3
screenshot4
screenshot5
screenshot6
screenshot7

can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Linux using boot camp is it possible why people choose VMware or parallels?

Hi everyone,
Has anyone installed Linux using boot camp ? I'm asking this because i want to install the latest version of oracle database 11g and i need to install Linux or Windows to run the server.
There is no version of Oracle 11g for macosx atm.
Why people choose VMware and Parallels instead of using boot camp?
Please give some feedback.
Greatfully,
Nuno

UrbanJenkie wrote:
Hi everyone,
Hi Nuno and welcome to Discussions,
Has anyone installed Linux using boot camp ? I'm asking this because i want to install the latest version of oracle database 11g and i need to install Linux or Windows to run the server.
Quite a lot of people are running Linux on their Intel-Macs (I am not one of them...).
Here's a how-to for Ubuntu https://help.ubuntu.com/community/Intel_iMac
There is no version of Oracle 11g for macosx atm.
Time to complain(send a feedback to Oracle
Why people choose VMware and Parallels instead of using boot camp?
VMWare and Parallels have the advantage over BootCamp, that you can use them while still being in OSX, so that you can run Windows/Linux alongside OSX.
With BootCamp you have to restart your Mac each time you want to switch to/from Windows/Linux.
Please give some feedback.
Hope it helps
Greatfully,
Nuno
Regards
Stefan

Choosing x200t for Linux use

Similar Messages

Maybe you are looking for