Choppy Audio & Video with Capture Window

Newbie to CS3.....I have a mini-dv tape that was recorded in hdv. I opened a new project using 1080i (60). I opened the capture window and hit play to see how the tape plays (I am playing it through a HDV Sony camera). The video plays perefect when I watch in on the LCD screen of the camera. When I watch it on the Capture screen, the video plays, stops, plays again - audio is all choppy. I cannot figure out why the tape is not playing fin in capture mode. I am using a PC. Is there an update I do not have or patch that perhaps fixes this issue?
Thanks, Steve

Could my issues be related to my processor - I am using a Pentium 4 2.53 Ghz with 1 MB of RAM.
Could be. I know that Jim Simon edits SD material happily on a machine not too different from that.
With HD, depending on the CODEC used, there are usually three elements that play a role in the playback and editing:
1.) CPU
2.) RAM
3.) HDD configuration (I/O sub-system)
Each can play a role in the playback/editing process. What are your full system specs? Might well be a clue, or clues, in that.
Good luck,
Hunt

Similar Messages

  • EMBDED AUDIO VIDEO WITH 5.1 audio  ON FCS 2

    EMBDED AUDIO VIDEO WITH 5.1 ON FCS 2
    DEAR MEMBERS
    IAM USING INTEL MAC PRO MACHINE AND FCS 2 .
    ON THE FCP 6 TRACKS OF AIFF AUDIO WITH VIDEO
    I WANT TO CREATE EMBDED AUDIO VIDEO WITH 5.1 SORROUND IS IT POSSIBLE ?
    with ucncompressed format i dont know how to export with comprerssor or sound track pro
    WITH WITH THIS CONFIGURATION. HOW CAN WE DO IT. CAN U HELP US

    FCP Does NOT do Surround Sound.
    You will need to Edit your project as normal in FCP.
    When you're edit is complete you will export your Audio to SoundTrack Pro where you will complete your Surround Sound Audio Mix.RightClick your Audio on the timeline > Send To Soundtrack
    http://www.apple.com/es/finalcutstudio/soundtrackpro/sound.html
    You can use Soundtrack Pro 2 to do audio mixing and panning for 5.1 surround sound, and then carry the resulting audio into FCP. However, you’ll need additional hardware (costing anywhere from $300 to $2,000) to get those six audio channels out to speakers—the Mac’s built-in digital audio optical port won’t suffice.
    - People in this forum seem to hate it when I mention Vegas... but Vegas is the only NLE I know of that will mix your surround sound audio directly from the timeline.

  • Creating Dynamic Audio/Video with OSMF Framework?

    Hi All, Thanks to this forum and the OSMF framework - I learn ways to improve my application each day with OSMF. I am experimenting creating dynamic sound as well as video and was wondering if that is possible with the OSMF framework. Can I write a plugin that will allow me to stream a media file and modify it before playing it in the flash player? I could do this with the sampleDataEvent in Sound class and also had some success using netstream appendBytes in flash 10.1. Can i use the OSMF framework for such applications? Does the plug-in architecture allow me to create a media element as a byte array ?
    Thanks

    Tony
    Let us back track through the details.
    Premiere Elements 11 on Windows XP 32 bit.
    What are the video compression and file extension of the file created in PowerPoint? What version PowerPoint? What is the frame size and frame rate?
    What are the audio compression and file extension (mp3 or .wav) of the audio created with this Cubase software? Are you dealing with mono, stereo, or 5.1 channel?
    From your description, it sounds like you are letting version 11 set the project preset for you. What is it setting? We can find that out from the reading under Edit Menu/Project Settings/General - Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio, even if the fields appear to be grayed out.
    If you import your .wmv export back into the Premiere Elements project, do you see content in both the video and audio tracks? If so, do both play back when you press the play button of the Edit area monitor?
    Have you checked Edit Menu/Preferences/Audio Hardware and ASIO and have you checked out your audio in the Edit area with the Audio Meter opened to verify sound level? See Window Menu/Audio Meters.
    Is the problem confined to this PowerPoint video and Cubase audio? What happens if you try this with a video from your camera and soundtrack from one of the SmartSound soundtracks?
    Please review the above and then let us know the answers to the questions.
    Thank you.
    ATR

  • Big issue on audio/video reproducing after Windows 10 installation

    Dear All,after I've installed windows 10, I was not able anymore in reproducing mp3 and mp4 files with the message regarding audio/video boards as probably not updated and the code 0xc00d11d1 (0x8007007e) after I'm making attempts in launching files.Obviuosly everything is correctly updated as I've checked on HP/nVIDIA/IDT codec sites and drivers updated for the windows 10 64bit version.Are you so kind in helping me with this important trouble?Thank you in advanceBestPas

    You are totally right.
    I have a Spectre 13 Ultrabook and HP tells me that everything it's ok for the upgrade.
    FALSE.
    After the upgrade I also found that audio was corrupted and after a quick google I found I was not alone and that IDT seeems to be unsupported.
    Whatever.. if it can help you, reinstall the driver but chise to select the new driver among the one already on your pc.
    At this point install the High Definition driver.. NOT the one previously installed.
    It worked for me to get the audio back... not sure about the quality because after 3 hours I went back to Win 8.1 because of the miserable value of Windows 10.
    Let me add that the care of HP for the existing customer willing to migrate is at least superficial

  • Firewire speeds and audio/video with Apple TV

    Hello,
    I hope someone can give me some advice regarding 400 vs 800 Firewire connections.
    After picking up an Apple TV about 8 months back, I have decided to consolidate all the audio/video content on my wife's and my Macbooks.
    Looking at grabbing a Mac mini and connecting a large hard disk via Firewire to that to store everything. I don't plan on connecting the Mac mini to the TV...will continue to use the Apple TV unit for that. However, while some some of the content will sync between the Apple TV unit and external hard disk connected to the Mac mini, I figure there will still be a good portion that would be shared/streamed off the external disk as it is viewed or listened to.
    I currently have an Airport Extreme network, and I am able to share/stream video and audio from my Macbook to the Apple TV and it works great. My question is, when I add the Mac mini and start streaming/sharing off the external hard disk attached to it, will there be a difference in performance if the drive is connected via 400 Firewire vs an 800 Firewire?
    I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.
    If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash. The machine doesn't need to do anything more than stay powered on with the iTunes app running and sending files back and forth to the Apple TV.
    Thanks in advance!

    +I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
    +If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
    No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
    A used Mini will usually lack the Apple warranty.
    Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
    If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

  • Audio playthrough via capture window

    How to set Audio playthrough during capture previewing? I want to hear the audio as I preview etc.
    It doesn't appear to be in any of the Preferences settings I can find...
    FCP HD 3.0
    Thanks

    William,
    Can't be done. And as odd as that sounds (since iMovie can) it's to do with the way FCE captures material. It captures the audio separately where as iMovie captures it all in one muxed file (hence why you can monitor it in iMovie).
    It makes the audio easier to work with in FCE as it's already on a separate track, whereas in iMovie you have to extract audio to do any processing to it.
    The only way to monitor during capture is by plugging some headphones into your camera.

  • Windows 8.1 on 13" rMBP Mid 2014 unusable. Slow, choppy audio/video

    I've installed Windows 8.1 Pro on my new 13" rMBP Mid 2014 and it runs terribly slow. The mouse movement is choppy and I can't even listen to music, which is horrible. The computer often as if it's running at 100% capacity - even though it's almost idle. If I click a link or press a button the audio track skips and does so randomly, too. On OSX it runs at least 10 times as well/flawless. I saw that some people said Retina laptops are slower with Windows because of the screen, but I'm not even using the Retina screen. I am on a external monitor with a disabled screen.
    Check out this DPC Latency Report:
    Troubleshooting attempts:
    - I've checked if there's an update for the audio drivers available and just reinstalled the current one.
    - I've reinstalled the newest Boot Camp Support Software.
    - My OSX version (the one before Yosemite) is fully updated.
    - I've disabled many devices in the device manager (network, audio, sound, etc) to see if it's a faulty driver, but couldn't find it.
    Do you also have similar problems with Windows 8.1 on the newest MBP? What can I do to fix this?
    Thanks

    On an older 13" 2012 MBP with Intel HD4K. (and an SSD - if there are no paging/swapping issues otherwise), it shows

  • Choppy flash video on all windows internet browsers

    Hello everyone.
    Like Carl E. Myers Junior recommended me, I opened a new discussion about my problem, which is:
    I noticed this problem, from the middle of January.
    I always watched videos in streaming, on youtube, veoh, megavideo, videoweed and usually not more than 10 or 20 minutes long.
    After what, I started to watch some WebTV programz that were more than a hour long, and I noticed choppy videostreaming, at the first I tought a specific site problem, but, than I started watching some TV Series on various sites, like veoh, videoweed and megavideo, and there the same thing.
    Practically I tried the thing on IE 9, FF 6, Chrome(16.0.9...) with Windowz 7, after watching 20 - 30 minutes of video it becomes chopped more rarely becoming very choppy, like 2-3 frames/second after 40 - 50 minutes.
    I've tried to copy and paste the link inside a new tab on the same browser session, watching videos on different flash player sites allways on the
    same browser session, nothing to do the same thing on all browsers.
    I've tried to empty the browser cache, and even deleted all local data of the Flash Player (watch the pic 1) on Win Control Panel, nothing even than.
       pic 1
    The only thing helped when I opened a new browser session, there I had other 30 minutes.
    So, the only solution was watching the video in 2 or 3 browser sessions.
    Anyone has a clue, or facing the same problem?
    Pls write, 'cose the Adobe Team wont wake up for only one nut guy who faces the problem.
    My PC:
    Samsung:
    OS Windows 7
    Browser Chrome 16.0.912.77
    Browser FireFox   9.0.1
    Browser IE 9
    Browser Safari 5.1.2
    Flash Player 11,1,102,55
    AVG Antivirus
    By the way, I even try the same thing on other PC's, gives the same problem.
    Thx for anyone's attention.
    Message was edited by: Gaduk

    I have seen this problem on some sites that were streaming a video using the JW Player.  What I usually do is the note the time, refresh the tab and set the video back to the time.  The problem seems to occur on my system when the RAM usage gets up to about 48% when a JW Player video is running. 
    Have you noted the CPU, RAM and Video RAM usage when the choppiness occurs?

  • Audio Problem With Capturing

    Hello,
    I'm experiencing some trouble with the audio of projects that I'm trying to capture. I've attached the camera with the Firewire cable to the computer like I've done a million times before. This particular footage that I'm capturing is about an hour long, and once it is done capturing and I play it back, at about 9 minuts and 30 seconds in, the audio becomes nothing but a horrible static sound. The tape itself is fine, since I've played it back through the camera. I don't think the problem is with the camera or the firewire cable either, since I tried different ones with the same result. I figure now it must be something to do with my computer.
    Any help will be greatly appreciated.

    hey there patrick.
    A couple of thoughts ...
    - If you are using Capture Now, stop using it and try Logging scenes then use Batch Capture.
    - Make sure your 'Capture limit' is set to 60 minutes or less and you have unchecked 'limit file size to xxx mb"
    - verify your capture hard drive is formatted Mac OS Extended.
    - make sure you are using an 'Easy Setup' for the appropriate video format.
    report back.
    x

  • Importing Alg Audio & Video with distorted audio, how to improve sound now.

    Been using iMovie & Quicktime to import Analog A/V. This last project I imported the movie into iMovie. The sound has lots of echo and distortion. Can someone tell me what would be the best iLife program to use for audio correction.
    Can you also help me with a jump start on some of the best quick corrections for distorted sound, echo & hiss. I would like to restore the audio as best as I can with the iLife programs.
    For the record I am also interested in turning stereo audio into surround sound.
    Help for my rookie self would be much appreciated as I am currently in a tight time crunch.
    Many thanks.
    John

    You may try iDealshare VideoGo to increase the volume of a video at Video Audio Volume Booster -Increase Audio Volume in AVI, MOV, MP3, MP4, WAV
    Working as an Audio Volume Booster, iDealshare VideoGo can easily boost sound volume for almost all kinds of audio file like  increase MP3 volume, increase WAV volume, increase FLAC volume, increase  AAC volume, increase AC3 volume, M4A, WMA, AU, DTS, AIFF, OGG, MP2,  APE, OPUS, CAF, VOC, etc.
    Working as a Video Volume  Booster, iDealshare VideoGo helps you raise audio volume for all video  files like increase MP4 volume, increase MOV volume, increase AVI  volume, WMV, FLV, AVCHD, MKV, MXF, WebM, SWF, OGV, 3GP, ASF, RMVB, etc.
    iDealshare  VideoGo also has a feature of increase sound volume as well as change  the source file format like convert the source audio or video files to  other more compatible audio or video formats.

  • Audio/Video with Nimas or OPS 2.0 format

    1. Which version of ADE support Audio or Video or text to speach conversion capability.
    2. Does ADE supports NIMAS standard if yes, how (any guidelines or tutorial for using creating and reading NIMAS for Adobe digital edition).
    3. Is there any Hardware means device begins supporting ADE commercially, has publisher and consumer started using it.
    4. Any links and tutorial for audio and video supports.

    Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
    Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
    Convert your files to DV-AVI Type II with 48KHz 16-bit Audio
    I have NOT used the products below, I only forward due to other mentions
    $99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
    $99 http://www.womble.com/products/mvw.html
    $90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
    $80 http://www.nchsoftware.com/prism/index.html
    $75 http://www.videoredo.com/en/index.htm
    $70 http://www.nchsoftware.com/prism/index.html Converter
    $40 http://www.daniusoft.com/dvd-ripper.html#135
    $40 http://www.deskshare.com/dmc.aspx Digital Media Converter
    $20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
    $00 http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
    $00 http://www.squared5.com/ MPEG Streamclip Converter
    $00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
    $00 http://www.virtualdub.org/ Mpeg to AVI Converter

  • Can't get audio/video with hdmi on my tv

    no video or audio on my tv with my hdmi

    Try
    Plug it in first switch on TV, so Macbook will reconise it. In System Preferences,Display etc
    then select Arrangement, . then go back and go into Sound, select Output and tick HDMI cable.? This will get your icons onto your TV and Sound
         try also switching between miror images

  • Red and green bars over video in capture window

    I have strange bars over the video I am trying to capture. Here is the link to the photo.
    http://www.pilgrimageproductions.com/Brian_Pilgrim/Welcome.html
    Any help would be great

    I'd bet you thought of mentioning what format you are dealing with, whether you are playing DVCAM tape on a regular DV camera or not, capture settings etc. but eventually you didn't.
    Do that, throw in as much useful info as you can when you post, always.
    G.

  • Compressing audio/video with mono sound

    Hey all,
    I have a video that has mono sound. On the left channel no sound and on the right channel the sound itself. Now I want to use compressor to compress the video and audio to AppleTV format. When I convert it the sound stays the same.
    My questions is how to I combine both audio channels to 1 channel or how to I get sound in both channels.
    Stefan Segers

    To get the audio to be routed to both left and right output channels, open the video in your NLE (FCE, FCP, Premier, etc) and pan the audio to center. Export and recompress in Compressor.
    -DH

  • Cant watch videos with new windows

    i got a new lap top for christmas had adobe reader all ready installed.i could watch any youtube videos now i cant wath anything i have the new windows idk y i cant watch videos.

    You need to install Flash Player.

Maybe you are looking for