Choppy playback in Premiere CC2014

After upgrading from CC to CC2014 playback is very choppy and inaccurate. Same project worked great in CC. Also cannot get Directlink to AE to work ( greyed out).
Would I need to upgrade my current AE CC to the newer version 2014?
2008 MACPRO, ATI radeon 5870, 32GB, internal videoraid, OS X 10.9.5

Hi Umon,
f umon kawamura wrote:
I have finished the project mentioned and actually started a new project - but that one does not even play back altogether now ( this morning it did) and it only has audio and jpg - stills... but since I did not change anything else on my machine since the upgrade ( except for also installing Speedgrade, which is why i wanted to upgrade ), I wonder what the possible problem could be?
Did you Direct Link the new project to SpeedGrade? That can cause sluggishness with certain GPUs.
What are the frame dimensions of the stills? Stills over 4000 pixels in either dimension can cause performance issues.
Is CC different in regard to CUDA/graphic card use?
As time goes by, the weaker and older GPUs tend not to work very well, especially if VRAM is less than 768 MB. There are two 5870s, one has 1 GB VRAM which is OK and the other only 500 MB, so not so good.
I do not see my 5870 listed for CUDA support ( neither for CC ) but does that mean CC2014 may not be working altogether?
Well, it's an OpenCL card so that's why it's not under CUDA. It should work, just not with GPU acceleration if the GPU is not supported.
Thanks,
Kevin

Similar Messages

Choppy playback in Premiere Elements 12

Hey,
Okay so I'm trying to create a short film for a class assignment and I'm having trouble viewing back the footage I have. I've been told to look into rendering my footage but I'm not getting a orange band above to render it with. I am aware that if there isn't an orange band then the program has 'decided' that I'm getting the best footage I can get but it's not helping the fact that the footage I want to edit is all choppy.
How can I fix this? I need to know as soon as possible please. Thank you.

Jerky or slow playback http://forums.adobe.com/thread/1071217
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•How many and what speed are your hard drives?
•Which version of Quicktime do you have installed?

Why Do I get Choppy Playback in Premiere Pro CS6

Before upgrading from CS5.5 to CS6 I wiped my computer and started from scratch. When editing 4 angles in CS5.5 I never had any problems with playback... even after adding titles, effects..
In CS6 I have my 4 files set into a multicam sequence but when I play back and start cutting from cam to cam it gets choppy.
I am running:
Windows 7 64bit
On a Dell Studio XPS 9100
Intel Core i7 930 @ 2.80GHz
12.0 GB Ram
ATI Radeon HD 5800
I have my memory preferences in PR set to 12 GB Installed, Ram for other aps = 3 Ram fpr PR 9GB, and it set to performance
Any help to speed up and render this proper would be great, Still have to add color correction, titles, logo.

The 1st update came out today. Downloading now. Looks like it should fix my old problems... fingers crossed
What's new in Adobe Premiere Pro CS6 6.0.1:
May 26th, 2012
Features added or changed in this update:
· Improved performance using OpenCL, especially when used on Mac OSX v10.7.4 or later.
· Added encoding presets with additional bit-rate settings for XDCAM HD.
· Added Automatic Peak File Generation preference in the Audio category for turning off automatic peak file generation for imported audio. By default, this preference is enabled and matches the behavior of Premiere Pro CS6 (6.0.0).
· When this preference is disabled, importing audio or opening projects will not cause peak files to be generated. If peak files were already generated, then waveforms will be visible. Files imported before the preference was disabled will continue to generate peak files.
· Enabled “smart rendering” and added Enable Smart Rendering Codec setting to the Video tab of the MXF OP1a exporters for XDCAM HD and XDCAM EX to enable or disable smart rendering for these formats. This option defaults to the off/disabled state. We’ll have more information about this feature in a post on this blog within a day.
Bugs fixed in this update:
· Start timecode was not imported or exported correctly when working with AAF files.
· Some files from the Canon 5D Mark III camera were imported with the wrong timecode.
· Playing/viewing waveforms in the Source Monitor caused audio dropouts with some XDCAM HD clips.
· NTSC MXF OP1a files that were exported with drop-frame timecode had video data that was tagged as non-drop-frame.
· Switching the Renderer project setting from Mercury Playback Engine Software Only to Mercury Playback Acceleration GPU Acceleration on a computer using OpenCL caused Premiere Pro to crash under some circumstances. Switching between the two settings on a computer using CUDA would in some cases cause problems with video and/or audio playback.
· Crash when using full-screen, cinema mode on some computer systems.
· Tape capture was not working correctly with some third-party systems.
· Crash when capturing from tape using some BlackMagic hardware.
· An extra, black frame was included at the end of the output when exporting to P2 MXF in some circumstances.
· First two frames were being played twice on external monitor using Matrox MXO2.
· Crash when using “hover scrub” with Matrox MXO2.
· Audio/video synchronization was off by a few frames when playing video on external monitor.
· The Export Frame button was not exporting the correct frame, instead exporting a frame one or two frames away from the current frame.
· Some audio files and some MXF files would go offline or have their audio reconformed when the project was re-opened or when Premiere Pro was minimized or lost focus.
· Crash when modifying an effect property while playback was occurring.
· Hang/freeze when using a dissolve transition on an adjustment layer.
· Dropped frames and audio/video synchronization issues when exporting to tape using some third-party hardware.
· Information about dropped frames on output to tape was not accessible to third-party systems.
· Some QuickTime files were imported with the wrong field order.
· When audio was sent through a Mercury Transmit plug-in, any number of channels that was not 2 or 6 was treated as mono.
· In HDV editing mode, File > Export > Tape could not be used with third-party hardware.
· The current-time indicator (playhead) was not returning to the current time after using the Play Around command.
· Last several frames of output when exporting to tape were black.
· When encoding a 23.976 fps video to H.264, the duration of the video in the output .m4v file was too short, and audio drifted out of synchronization with the video.
· Transparency (alpha channel) information from a dynamically linked After Effects composition was rendered incorrectly in Premiere Pro.
· Importing some QuickTime OP1a files caused Premiere Pro to hang.
· The duration of the audio track sent to SpeedGrade using the Send To SpeedGrade command was the length of the entire Premiere Pro sequence, not the length of the work area.
· Timecode written to trimmed clips using the Project Manager did not match the source timecode for some QuickTime files.
· Various other crashes.

Premiere choppy playback after update

Greetings,
I'm having a rather bizarre issue which has just came about recently.
I've been running PPro CC successfully for six months without issue. After the most recent update to 7.2.2 I'm having choppy playback both in the source and program monitors. I'm editing mostly AVCHD from a Panasonic HMC80 camera. The choppy playback occurs regardless of resolution or frame rate. I even tried a standard DV file and that too is playing back not smooth. Changing the playback resolution to 1/2, 1/4 etc.. makes no difference. Changing from Mercury software to hardware makes no difference. I tried creating a new project as well as clearing cache files, previews, etc.. and still have the problem. As a last effort, I re-installed my OS, and re-installed Creative Cloud and Premiere. The issue is still present. My hardware cannot be the issue as I've been editing successfully before. Nothing has changed except for the Premiere update. I've read elsewhere that others are experiencing the same issue. Any thoughts?
Windows 7 Home
Premiere Pro CC 7.2.2
i7 [email protected]
8GB RAM
NVIDIA GT 425M

Im having the same problem. Didnt show up until after the 7.2 update.
Major lag on one specific spot in the timeline, and muting all tracks makes no difference on the lag.
I cleaned my project file, caches, downgraded playback resolution, tried the mercury playback function. Nothing. Now the choppiness seems to bleed into the rest of the project until it is all so slow and unplayable. I'm having a harder time finishing this project as time goes on.
almost same specs
windows 7 home
Premiere CC Pro 7.2.2
Intel i7 2670QM
Nvidia gt 630m 1gb vram
8gb ram

Choppy Playback of Blackmagic ProRes in Premiere CC

Hi there,
I'm editing a friend's short film, shot on the Blackmagic Cinema to ProRes files. In standalone Quicktime, outside of Premiere, the files play seamlessly, but in the Premiere CC project, Source and Program Monitors, the clips are choppy/frame-dropping, even at 1/4 resolution.
I've edited countless shorts and features on this system - Canon 5D, 7D, Scarlet, C300 - and I've never experienced choppy playback. Any advice on how to nix this? Quicktime is fully updated, and, like I said, the files play perfectly in actual Quicktime.
Thanks!
Stephen

Hi SDCone,
SDCone wrote:
Me, too. But as soon as I re-synched the project and moved back, the
choppiness stopped. Like clockwork. I have found that, since updating to
CC, I am using PP 6 more often.
As tough as that is to take, I appreciate your feedback.
Have an awesome weekend,
Kevin

Choppy Playback when using the PLAYBACK feature in preferences

I've been running into an issue since the PPro CC 7.1 update in October where Premiere will play footage just fine until you tell it to send a signal out to another monitor. Before hand everyhting played fine in the Program and Playback Monitors. Now whenever switched on it plays back choppy constantly. Doesn't matter the footage format.
To further explain -- I have a 3 monitor setup 2 for editing and a thrid for preview playback. All of this runs via my Retina MacBook Pro and has worked fine since PPro 6.0. Never had any slowdown and its been one of my favorite features in PPro.
So when this update came around I ran into the playback issues mentioned above. So I just keep playback switched off and just leave the third monitor barren... figuring it was a bug (?) I waited and saw a few updates, but nothing that fixed said problem. Though with each update and bug fix I've eagerly gone through the same exercise of trying out this feature once more. Again, nothing has changed... However I found out this evening, that when using my three monitors and suffering through the playback, that I can tell monitor to toggle to full screen and instantly my playback monitor has corrected itself and the two play in perfect sync (quick note the program monitor is choppy when not in full screen mode and trying to playback with the third monitor). I can toggle on and off during this playback and when on its fine, the moment its off, its choppy again. Absolutely bizzare. And to some extent makes my playback monitor somewhat useful agian... albeit in a very tedious fashion.
The point is, I'm at my wits end again here. I've seen plenty of choppy playback post, but nothing quite like this. I've tried to clearing caches, and preferences, even did a unistall/reistall tongiht... and I'm coming up with the same issues in the exact same places. But ultimately I am no closer to finding a proper solution to this particular playback issue. Aside from doing a clean install of the OS and all my software, though I'm not sure its worth it just yet. Even if its my last resort.
Has anyone run across playback as bizzare as this? Did you find a solution? Is there a post I've missed? - Thanks
Specs --
Macbook Retina Mid 2012
16 GB Ram
MacOS10.9.1
Premiere CC 7.2.1 (4)

In the iPhoto preferences set Mail as your email client
LN

Choppy playback/rendering for one camera in a multicam sequence

Any help is appreciated with this weird, specific problem...
I have a sequence (let's call it "MAIN") which contains many separate multicam sequences (let's call them "M1" through "M5"). Each of these multicam sequences is made up of footage from two cameras, a Canon 5D Mark III and a Canon C100. All footage in M1-5 was shot sequentially, and neither camera changed settings, although the cameras recorded with different settings from each other. The 5DIII recorded at 1080p 23.976fps. The C100 at 1080i 60Hz. This footage makes up all the assets in my project panel and they have no special media interpretation.
Here's the problem. Everything looks/plays fine until I get to M3 in my MAIN sequence. When I switch to camera 2 (the 5DIII), the playback in the program monitor looks about half the framerate of the original footage and all of my other sequences. Camera 1 plays smoothly. Camera 2 in any of the other multicam sequences plays smoothly (while in MAIN). When I open up M3 in the timeline, it plays smoothly. When I open up the original video in the source window, it plays smoothly. Everything plays smoothly but camera 2 in M3 (in MAIN) in the program monitor.
I rendered a clip of MAIN that has M3 cam 1, to cam 2, back to cam 1. Camera 1 is smooth, while camera 2 plays back at about half frame rate and looks interlaced. So this is a real problem and not just some display issue.
The interlaced look of the render made me think there's some sequence settings that were off, whether they were in MAIN or M1-M5. However, the sequence settings of M1-M5 are all identical, and the sequence settings of MAIN are not affecting any of the other multicam sequences.
I tried restarting my computer and deleting my cache. No dice.
Premiere Pro CC
Windows 7 Professional 64 bit
HP Z820 w/ 2 x Xeon E5-2630
128GB RAM
GTX-570
Addendum: After playing around with sequence settings a bit, but after resetting them to be all as they were, now M2 is giving choppy playback on camera 1, while camera 2 plays smoothly. What in the world is going on here?

The LEDs were reflecting on the book that the GoPro was on but I got it to work with a garbage matte using a frame grab with the lights off and including the book. It worked a treat! But I am going to remember the dark grey matte thing; less is more and all that. Thank you for your input, much appreciated. Ooh and as for multicam syncing I just nested the composite shot and used that as a single camera source.

Choppy playback with mxf files...

Hello. I have been working with Premiere Pro CS3 for quite sometime until just recently. Then last week I installed Windows 7, then Premiere Pro CS5.5 along with various updates. I usually work with DVCProHD (Panasonic), 720p, 60p. I just started working on a new project and playback is very choppy, whether the footage is rendered or not. Everything else works fine. My computer (purchased in 2008) has Dual Intel Xeon 5150 (10.64 Ghz total), 4GB DDR2-667 FBDIMM RAM (4x1GB), and an ATI FireGL V3350 256MB PCIe Video Card. I am using a dual monitor set up as I used to do with Premiere Pro CS3 and Windows XP (with no problem before I went to CS5.5). I checked the settings for the Mecury Playback and it seems to show that it is selected but also grayed out (can't be changed to anything else). Anyone have thoughts on why the choppy playback? Even Premiere 6.0 never gave me choppy playback like this. Thanks in advance.

> Exactly how much RAM is Premiere Pro CS5.5 able to use at maximum?
All of it. That's one of the reasons that we ported Premiere Pro to be 64-bit.
Are all files of all types giving you choppy playback, or just some? If it's only some files, then tell us as much as you can about those files.

Why am I getting such choppy playback?

Long time reader, first time poster, I'll make this short and sweet. Here are my specs:
Imac 27"
3.4 GHz Intel Core i7
24 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048 MB
1TB internal Fusion drive SSD
I am working in a fairly big (1TB footage) 4k mixed with 2k project. It's a 3 simultaneous camera shoot, so I need to multi-cam. I have two external WD Caviar Black 7200rpm drives. I also have a Lacie 1TB Thunderbolt drive available.
Because the final output will be 1080, but possibly 2k in the future, I decided to import all the RED footage natively (as opposed to transcoding to prores 1080). All my sequences are 1920x1080, with multi-cam nesting in 1080 as well. Ram is allocated to 20GB Premiere, 4GB other.
No matter what I've tried, I always get choppy playback in the project...especially with multi-cam activated, even at setting my resolution to 1/4. What I've tried:
All Media on WD 01 drive...Project, Cache, Preview, Scatch on WD 02 drive...Internal SSD for OS and Apps: Terrible performance
All media split between WD 01 and WD 02...Cache, OS and Apps on Internal SSD...project, preview, scratch on WD 01. I also tried the same thing but with the project, preview, and scratch on my Lacie 1TB Thunderbolt and internal SSD: Slightly better than all media on 01 drive.
At this point I feel like I've tried every variation of where the MEDIA, Cache, project, and Scratch/preview files go but nothing seems to give me smooth playback consistently. I'll have brief periods where it's very smooth, but then choppy soon after. I'd understand if I were trying to edit in 2k or 4k, but all my timelines and nests are 1080. Even if I pre-render the sequence, it barely helps. Is it possible I need more RAM, a better GFX card, better external drives? Help?!
EDIT: Premiere 2014 updated to latest version. No big apps running aside from Premiere. All my drives have at least or close to 50% space available.

Recommend you take a look for disc layout & such over at the Tweaker's Page ...
Tweaker's Page ...
http://ppbm7.com/index.php/tweakers-page
Basically they recommend just the program file on the system/OS disc ... and then putting things on other drives as per the needs of the "asset" ... some need very fast connects, a couple only mostly fast connections.
Footage is mostly a one-way read-only operation, and export out is mostly a read operation, so those can at need be on somewhat slower connections as long as they aren't on the SAME drive over a slower connection. Such as say one of the PNY 128Gb high-speed USB3 flash-drives into a USG3.0 external port on your computer. I've adapted this from one of the other users, and it works fairly well for my 1080p footage. I export to one of several drives I've got in external boxes connected via USB. It's adequate, though not blazing.
Everything else ... project files, database, previews, cache ... there's a TON of read/write work going on constantly during playback with these. So 7200 or faster "standard" drives or SSD drives, connected internally via SATA-II or better, or external via eSATA-II and Thunderbolt connections are needed. None of the Firewire nor USB2/3 connections available have near adequate sustained read/write speeds to work in the massive testing they've done at the above mentioned site. The "burst" speeds claimed by manufacturers are achieved on the absolute most ideal set-up with the um ... right size? ... of data packets to get the best numbers. They aren't usable numbers for heavy and constant read/write demands like the Adobe DVA's through at the machine.
Remember ... during playback ... PrPro "reads" the source footage including when to jump in & out of every clip, throws in all your instructions for editing, color changes, transistions, effects, EVERYTHING ... and on-the-fly builds the image you see in the playback monitor. It doesn't make something for it to just 'read' from disc, it does this on the fly. Even when you make previews for a section of a timeline, any change you make ... those previews are outdated.
Which is why we all need machines that both have pretty solid hardware off the mobo, AND plenty of high-speed disc connections. Best case is say a 4/5 disc array of 2Tb discs in RAID 0 or 5 for the project files, d-base, cache, & previews ... and that can maybe even have media (original footage) on it.
Neil

More choppy playback issues

None of the previous discussions have provided a solution, even though I followed all of their advice.
I have a new project, started on CC2014 V8.2.0
OS X Yosemite 10.10.2
Macbook Pro I7 16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
Working on 1920X1080 sequence, *no* effects, absolutely none
footage and project file on external thunderbolt 2Gb Western Digital HD
After playing the sequence for a few seconds, it starts to 'hang' and 'stutter' and will not play smoothly.
I have:
clicked "Maximum Render Quality" in sequence settings
unchecked "Composite in Linear Color" (although it keeps checking itself back on)
cleared all the caches, both within Premier, and using "WhatSize" app
restarted, rebooted, re-everythinged
Still will not play smoothly. Any suggestions? Besides going back to FCX that is....

1. two weeks ago I completed a project with footage from the same camera, on the same computer, with the same drivers, and had no problem, so I have trouble believing it's the Nvidia driver.
2. I did turn off, then on, then off, then on, etc. the GPU acceleration, no effect
3. Again, the same project I completed two weeks ago was from the same external HD (You're right, 2Tb, sorry) and again no problem.
4. I upgraded to Yosemite just a couple of weeks after it came out, long enough ago that I can't remember exactly when, but again have completed many projects since without this problem.
5. I can play the mp4 files on any other program smoothly, VLC, Quicktime, RealPlayer, etc. so it's not the footage.
I went through the forums and tried every suggestion I found, and it seems like there were indeed a lot of issues with choppy playback, and a lot of suggestions on how to fix it. None of the steps put forward have helped, and according to at least one of the forums I've read, that person was unable to find a workable solution. Starting from scratch seems pointless, since I just started this project fresh a few days ago.
I really feel like in the latest update from Adobe something else got screwed up and I have no choice but to live with it until they decide to acknowledge it and fix it.

Choppy playback after upgrading hardware

I've recently upgraded from a phenom 965 and 7gb 1333 gb ram, to an i5-2500k with 16gb 1600mhz. Otherwise everything is the same, i just reinstalled windows and premiere pro after the upgrade. After the upgrade this error, or annoyance, occured. Here's all the specifics:
-Premiere pro CS5.5.2 v/latest updates
-Windows 7 pro (fresh install v/important updates)
-h.264 in mp4-container
-no error messages
-very choppy playback after "jogging". When theres a lot of movement, the picture becomes very "stuttery" and "pixelated" in that area.
-no extra codecs or similar is installed.
- hardware:
-nvidia gtx 560 v/latest drivers
-i5 2500k @ 4,6Ghz
-16Gb 1600mhz xmp ram
-7200rpm 500gb source hdd
-5200rpm 120gb scratch disk
-Agility 120gb ssd OS and programs
I have tried using 1/4 playback, using ssd as scratch disk, installing and uninstalling extra codecs but none of it made any difference. The cpu or ram never exceeds 50% capacity when the problems occur.

But wouldnt the cpu reach 100% capacity before it starts being the bottleneck?
Only if all the other components supply data fast enough that the CPU can run flat out. If the CPU has to wait for other components to catch up, CPU load will be less than 100%.
If you race alone on a track and there are no other contestants (components) in the race, you can go flat out at 100% of the speed, but if the track is filled with many other contestants (components) from a local old-age house, your speed will drop significantly.

Audio waveform causing choppy playback

Having issues with nearly all Premiere cc 2014 (8.1) timelines where playback with audio track expanded to show waveform causes bad, choppy playback. As soon as i collapse the audio track playback is perfect. Not very useful when cutting interviews and needing to see waveforms.
Running a late 2013 mac pro 3.5ghz 6 core intel xeon e5 32gb ram all footage stored on a lacie 6tb thunderbolt.
Any fixes or help appreciated
Thanks

Everything's on the internal drive - a 320 gig 7200 rpm WD. Still has ~120 gigs free. The thing that's really getting me is that when I unplug the USB audio adapter, the video playback is fine.
There is an external drive for TM backups, but I just unplugged that to see if it was part of the issue and it doesn't seem to change anything.

Reverse Speed Causing Choppy Playback

I am using CC Premiere Pro 2014 and am getting choppy playback when I reverse the footage. The footage is slow and jumpy. The footage is mp4 shot at 24 fps. I have rendered the clip and still get the same results. Using a new souped up Mac and have cleared the cache so computer isn't the issue. Any way to fix this?

System spec:
Asus x58 P6-Delux
i7-950
12GB RAM(1600Mhz)
1 System drive 500GB
1 TB (RENDER+Project)
2X1TB Raid 0 (For Footage)
Nvidia GTX 570
OS win 7 64 bit (Professional)
PrPro CS5 (5.0.3)
Media Encoder 5.0.1.0
NO Extended Desktop (1 Display)
Project Setting : DV PAL (4:3 1.097PAR) 48Khz Lower Field First
Footage :20 Min DV PAL 4:3 1.097PAR 48khz Lower Field First
All Driver are update (cheked at the manufactor website)...

HD video has choppy playback on timeline

Equipment:
New MacPro 2 X 2.93 GHz 6-Core intel Xeon
12GBs Ram
Nvidia Quadro 4000 2048 MB video card
Software 10.7.2
Video Card: Kona 3 with 9.0.3 driver & 9.01 premier plugin
Videodrive: 7200 RPM 2 TB internal (not the system drive) remaining space about 750 GB
Adobe CS 5.5 software
I just switched from FCP 7 to CS5.5 including a new computer which I perceive is optimized for CS 5.5. In playback my audio is choppy and dropping out some of the time, then if I stop and start the payback it will be fine, or sometimes there is no audio. doesn't seem to be any consistencey in what will happen the next time I start playback. On the timeline is a 1080i ProRes file I finished in FCP 7, then imported the video & audio file to Premier to make a couple of last minute changes. Program is 50 minutes long. I have the sequence setup as Kona 1080i compressed. I imagine I have missed something very basic here, but don't have a clue what it could be. Can anyone point me in the right direction?
Thx...Jim Watt

John,
I don't really think it's applicable in this particular situation. I have just switched to PP for FCP-7. All my FCP 7 shows are mastered in ProRes and this last one of course was too and it's the one I had to make a small change in. I didn't see anything in the post you referred me to that suggests that PP cannot/will not play back proRes material.
At the moment I'm screening DVCPROHD 1080i material and I'm having the same problem with choppy playback/freezes and lost audio in the viewer. I saw a post that came from Walter Biscardi for audio setup and followed that, which did seem to help a little, but the problem still exists. This is what i did...
Audio...set preferences in Premier to "built in output" and also set audio mapping to same, set audio hardware to "built in output" with caches at 1024
set computer preferences audio output to Kona card...
So I think this is some sort of setup that I have missed since I get identical problem with ProRes and DVCPROHD. Any other sugestions will be most appreciated. I'll give AJA a call tomorrow if I can't find a fix on the forum.
thx...jw

What configuration of the new macbook pro do I need to run FCS 3 without choppy playback.

Yep, just wondering what configuration of the new macbook pro do I need to run FCS 3 without choppy playback or lagging. I'm thinking about the 7200rpm, 2.2ghz, antiglare, 4gb ram, with 1gb GPU graphics card configuration

Nothing wrong with the computer. Playback is dependent on the media and the drives.

Choppy playback in Premiere CC2014

Similar Messages

Maybe you are looking for