Choppy Playback when using the PLAYBACK feature in preferences

I've been running into an issue since the PPro CC 7.1 update in October where Premiere will play footage just fine until you tell it to send a signal out to another monitor. Before hand everyhting played fine in the Program and Playback Monitors. Now whenever switched on it plays back choppy constantly. Doesn't matter the footage format.
To further explain -- I have a 3 monitor setup 2 for editing and a thrid for preview playback. All of this runs via my Retina MacBook Pro and has worked fine since PPro 6.0. Never had any slowdown and its been one of my favorite features in PPro.
So when this update came around I ran into the playback issues mentioned above. So I just keep playback switched off and just leave the third monitor barren... figuring it was a bug (?) I waited and saw a few updates, but nothing that fixed said problem. Though with each update and bug fix I've eagerly gone through the same exercise of trying out this feature once more. Again, nothing has changed... However I found out this evening, that when using my three monitors and suffering through the playback, that I can tell monitor to toggle to full screen and instantly my playback monitor has corrected itself and the two play in perfect sync (quick note the program monitor is choppy when not in full screen mode and trying to playback with the third monitor). I can toggle on and off during this playback and when on its fine, the moment its off, its choppy again. Absolutely bizzare. And to some extent makes my playback monitor somewhat useful agian... albeit in a very tedious fashion.
The point is, I'm at my wits end again here. I've seen plenty of choppy playback post, but nothing quite like this. I've tried to clearing caches, and preferences, even did a unistall/reistall tongiht... and I'm coming up with the same issues in the exact same places. But ultimately I am no closer to finding a proper solution to this particular playback issue. Aside from doing a clean install of the OS and all my software, though I'm not sure its worth it just yet. Even if its my last resort.
Has anyone run across playback as bizzare as this? Did you find a solution? Is there a post I've missed? - Thanks
Specs --
Macbook Retina Mid 2012
16 GB Ram
MacOS10.9.1
Premiere CC 7.2.1 (4)

In the iPhoto preferences set Mail as your email client
LN

Similar Messages

  • Premiere Pro CC - Jerky Playback when using the Playback Option (Mavericks)

    I certainly jumped the gun and wished I hadn't, but Mavericks as sort of sunk part of my traditional editng approach. I know, should of waited to upgrade... alas.
    In PPro CC, whenever I have the playback optioned turned on for another monitor, I get stuttery/jerky playback in the program monitor and the playback monitor. When I turn off the feature, I get smooth playback, but have sacrificed the playback monitor, which is quite essential. Has anyone run across this issue or recognize what could be throwing things off?
    This was true in 7.0.1 and the latest update 7.1.0. -- I'm not sure its an Adobe issue, this may be fully on Apple... with high chances of that.
    To try and fix I made sure power nap was turned off on my Adobe Apps and that my Mission control spaces weren't separate for each monitor...
    Thoughts?
    Running Macbook Retina on Mavericks, Premiere Pro CC, 16 GB Ram...

    Go back to http://forums.adobe.com/community/premiere and enter
    mavericks
    in the line under ASK A QUESTION to read previous mavericks discussions (there are several) with at least one having a possible solution
    click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

    Hi everyone,
    I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
    on different physical disks to have them not slow-down each other in case of intensive disk accesses.
    So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
    individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
    Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
    Thanks in advance.
    Cheers,
    Sebastian

    Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform.  Lastly, you could copy the vhd file to a different location
    before starting the VM.
    .:|:.:|:. tim
    Hi Tim,
    thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
    The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
    How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
    2x physical machines carrying severel HDDs
    8+ VMs spread to run on the 2x servers
    when setting up replication I can only set the storage-location from server A on B and vice versa B on A
    Thanks again for your reply.
    Cheers,
    Sebastian

  • I get an 'Invalid Image Type' error when using the Locate Features. (Evaluatio​n version)

    I'm using the Evaluation Version of Vision Builder. I Simulate Acquisition using my own image (jpg), which loads fine. However, when I try to use any of the Inspection Steps features, other than Enhance Images, I get an "Invalid Image Type" error.

    Hello,
    Vision Builder functions usually work with a certain image type. For example, all the functions listed under Binary (in the menubar) will only work with binary images. Likewise, color functions will work for color images and grayscale will work for grayscale images.
    You can convert a color image into a grayscale by extracting a color plane and a grayscale image can be converted to binary using the threshold function.
    Hope this helps!
    Regards,
    Yusuf C.
    Applications Engineering
    National Instruments

  • Audio will not playback when using the blackmagic card

    Hey
    I have a Premiere Pro CS.5.5 running on MacPro running lion and with a black magic extreme 3d card.
    Audio wont playback in source window, i hit play and nothing happens the time and cursor just stand still, no audio playing no errors no nothing.
    However if i put that wav file in my timeline everything works fine.
    Video plays fine in the source monitor and outputs to my SDI monitor with the black magic card.
    If i go to preferences and player settings and select adobe player as the default instead of blackmagic then the audio (and still video) works fine.
    in the source viewer but i am not getting anny image on my SDI monitor.
    The timeline and record window everything still works fine.
    Have annyboddy had this problem
    Thank you
    Mvh
    Thomas J Mikkelsen
    Editor
    M2Film Denmark

    Everything is set up right.
    And when i put stuff in the timeline all is outputting fine on the monitor and with the audio
    So if i am trying to play a wav file in the source window, the cursor is not moving and the timecode is not counting it just dosent move.
    But as soon as i drag the wav file to the timeline there is no problem, the audio file is playing just perfect.
    So it is the source window that is the problem.
    Thank you for all you help
    Thomas J Mikkelsen
    Editor
    M2Film Denmark

  • Is there a way to remove the blurred background wallpaper effect when using the phone in iPhone 4S' iOS 7?

    Hello.
    A few nights ago, my picky client finally upgraded his iPhone 4S' iOS 6 to iOS 7. He doesn't like the blurred background wallpaper image when using the phone feature (e.g., calling and talking). Is there a way to disable this new visual effect like in iOS 6?  I am pretty sure this is by design by Apple.
    Thank you in advance.

    sberman wrote:
    I'm not completely sure I understand, but ...
    Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
    I will tell him about that, but I don't think that would be it if that is related to animation.
    We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

  • I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there.  Why doesn't it show up in the folder?

    I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there.  Why doesn't it show up in the folder?

    What system and iPhoto version are you running?
    If your're using iPhoto 9 or later  Command (right) - click on the photo in the search window and select Show Event in the Contextual menu. 
    That will take you to the event where the photo is.
    OT

  • When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box, for a specific area on the page...instead of it going on in one straight long line...?

    When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.

    Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
    Thanks,
    Josh

  • HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    Hi,
    I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
    Good Luck

  • I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

    i have installed photoshop elements 12.
    when I try use the editing features it said that i must login to Adobe to register the product.
    but each time i try to it said there is a problem.
    help
    the problem stated that the internet is not connected, but that is not the case.

    I had the same issue and I'm running Windows 7.  Tried working with technical support for several hours but they were no help.  They just had me doing the same things over and over, offering no real answers.  I finally got fed up and have decided to return my product for a full refund.

  • When I try to use the Message feature on my iPad 2, to send a message to a friends iPhone (on iOS 5 too), why will it not allow me to send the message?

    When I try to use the Message feature on my iPad 2, to send a message to a friends iPhone (on iOS 5 too), why will it not allow me to send the message?

    Check to make sure you are not typing your message in the Subject line.  If you are, it won't let you send the message.  Cut and paste the message into the Message field and you should be all set.
    FYI, you can disable the Subject line from your messages in Settings/Messages.

  • Why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink?

    Question
    why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink? This feature has always worked perfectly on all my windows XP computers,but not at all on any of my versions of firefox on windows 7.How can i fix this? Why does it not work?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. You can also attach a screenshot on this page below '''Post a Reply''' > '''Add images: Browse ...'''

  • When using the "submit by email" feature can you add 2 emails?

    When using the "submit by email" feature can you add 2 emails?

    Yes. Seperate them with semicolon (;) just like you would in a normal email client.
    Kyle

  • When I try to use the customize feature for toolbars, the toolbars themselves disappear as soon as I click "customize." Ideas?

    When I try to use the customize feature for toolbars, the toolbars themselves disappear as soon as I click "customize." This happens whether I choose "customize" from the drop-down menu, or use the "control-click" option. I don't remember having this problem before, since I've customized the toolbar previously, although not for a while.
    I'm running Firefox 17.0 on an iMac with OS 10.6.8

    Hello rheahirshman
    check it in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#os=mac&browser=fx17 Safe Mode], in Safe Mode window select '''''"Start in Safe Mode"''''' and see if this happen again, '''''if not''''' see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#os=mac&browser=fx17 Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Maybe you are looking for

  • How to: Secure pdf form that is emailed and later uploaded

    We have a pdf form that will be posted on our website.  Local college/university faculty will link to the form on their websites or just give students the link to our page.  Students will fill the form and it will be emailed to a faculty member from

  • Referenced masters:  How can you tell where a photo's master is?

    After reading many recommendations on this site, I have set up my main library on my internal HD with referenced masters on an external HD. Now I need to import a job which I shot out of state and which was saved as a managed library on my MBP. So I

  • OBIEE 11g: Freeze Column Headers?

    Hello experts,   I am still new to 11.1.17 and my boss wants me to have the report's panes frozen, just like in excel.  Does anyone if there is an easy way to do this besides going through the instanceconfig.xml? Just through analysis I was thinking

  • HT3204 how do i get a song as a ring tone

    I want to use a song i have downloaded as my ring tone how do i get it to my default ringtone

  • Using UK 02 iPhone in Australia

    Hi, I am moving to Australia for 6 months and would like some guidance on using my iPhone. Since I got a 3G phone, I cannot imagine life without it! But, I understand the data roaming charges will be really expensive. Does anyone have any solutions??