Choppy scrolling after updating to iOS 4? (Device: iPhone 3GS)
Is anyone else experiencing a little slugginess in scrolling speed after updating to iOS 4 on the 3GS? The worst choppiness happens at the homescreen when scrolling through pages; the pages seem to "stick" a little bit occasionally, like they're running through a sticky surface.
Even this is a minor issue it's really annoying and makes the phone feel very flimsy, cheap and slow. I hope Apple will do something about it in the next update.
Similar Messages
-
Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!
Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!
-
I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.
Howdy syafiqahmad,
If your iMessage and FaceTime still hasn't activated by now, I would recommend you use this specific section of the following article as long as you verify you've done all the other troubleshooting from it for this issue:
If you get an error when trying to activate iMessage or FaceTime
If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
Contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling -
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
-
Can't send iMessage after update to IOS 7 on iPhone 5
After I update to IOS 7 on iPhone 5 the iMessage function seems not working properly. when I trying to send iMassage the "sending" bar loads up to 90% (slowly) and then stops dead and doesn't move. It stays at that 90% mark until it either starts working, many minutes later, until I delete the message, until it goes to "sending failed" or whatever it says with the little red "!" it will not automatically send by text even the iMessage function is not working. This problem wasn't happened all the time but regularly. This problem happened when I update to IOS 7 on my iPhone 5 and also happened in my friends' iPhone 5 with IOS 7. After I restart everything will back to normal until it crashes again.
Anyone who get the same problem like me?I found the same solution, resetting network settings. Sure we have to re-input Wi-Fi network passwords, but it's not a big deal. What is a big deal is that this solution is temporary -it works for a day or two and then the problem returns, for both me (iPhone 4, 7.0.2 Verizon) and my wife (iPhone 5, 7.0.2 AT&T). I've just reset my network settings for the 2nd time since installing iOS 7 on launch day and 7.0.2 on it's launch day.
C'mon Apple! A little help here? I really don't want to have to do this every few days. -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
After updating my iphone 4 to iOS 5, it refused to read my att SIM Card. I went to the Apple store (Lennox Mall, Atlanta Georgia) for help, they told me that it was an Att problem, and needed me to get a brand new Sim Card from Att. I went to Att and replaced my SIM Card to a new one. I later returned to the Apple store, but the phone still didn't work. The apple techs blamed the att network, and stated I needed to go home and wait for 24-48 hrs, and retry the att network again, and hopefully the phone will work. The next option they gave me was to pay $200.00 to get a replacement because my phone was out of warranty.
So I basically I have a phone which has never been dropped, not abused, no water damage or what so ever. Prior to my IOS 5 update, it worked perfectly without any problems. Now, that its not working as a result of either Apple's or Att's fault, no one seems to be helping or standing behing their product. Both parties are blaming each other for the problem. Can someone help??I've seen a number of reports of this on here. In most cases where people took their phones in to the Apple store, they were given a replacement, even if the phone was out of warranty.
-
After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.
I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer -
After upgrading to IOS 7.4 my iPhone asks for a password. I did not use a password before. The AppleID password does not work. Can you please let me know how to disable this screen? Thank you!
Hi Joanna711,
Thanks for visiting Apple Support Communities.
Try the steps in this article if you're not able to enter the passcode on your iPhone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
All the best,
Jeremy -
HT4623 After updating to IOS 6, my iPhone won't restore from back up.
I updated my iPhone 3GS to the new IOS 6 and i backed it up before i done anything. and it starts to restore from back up but it gets 3/4 way done and the green bar stops moving and the time remaining goes up instead of down. what do i do to restore from my back up?
I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer -
trying to update to ios6 on iphone 3gs but keep getting error code 1403
Try updating over Wi-Fi:
Settings > General > Software Update. -
HT5868 After updating to ios 7, my iphone is no longer showing as a storage device in Windows 7
Priot to updating my iphone 5 to ios 7, my device showed up in My Computer as a device and I simply copied a bunch of photos to Windows 7 and then deleted them from my iphone in the Windows folder. After the ios update, my phone is no longer showing as a Device with Removable Storage on my computer. I restarted my computer and also clicked the trust this computer option on my phone. (Synching with itunes works perfectly so I know the connection is ok) Any ideas?
Thanks!I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer -
After update to iOS 7.1, iPhone 4 won't work. Stuck in recovery mode. Won't restore.
Hello,
So I'm pretty baffled at this point. Last night I started downloading the iOS 7.1 update as my iPhone 4 was plugged into iTunes. The update did not complete on my phone. Instead, the dreaded "Connect to iTunes" logo appeared. After researching last night and again this morning, I have not found a solution.
When I plug my phone into iTunes, this message appears: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." Then, I have the option to restore iPhone.
So, having come to terms that I will lose all data - luckily my photos and videos have all been uploaded to my computer - I began restoring it. As it's downloading, this message then appears:
I've read through the "More Information" page several times. Checked my host file, added the "# " in front of the gs.apple.com IP address, restarted the computer, and still no luck. I haven't tried updating or restoring on another computer yet, but I have a feeling that won't change anything - I've read other people's accounts and that step just didn't work.
I updated my iTunes to the lastest version and restarted. Nothing.
I downloaded tinyumbrella and RecBoot to try and exit the apparent recovery mode. This didn't work. I have tried numerous times restarting the phone (holding down the home button and power button) with different variations of unplugging the USB from my laptop, letting go of the home button when the Apple logo appears, holding down the + volume button along with the power button, etc.
Does anyone know what I should do? Would calling Apple help? Or would going in person to an Apple store be better? Would they replace my phone? I don't see how this can be resolved unless the Geniuses have a universal restart method that bypasses everything. I need my phone for work and would be okay with just restoring the phone. Note: My phone has not been jailbroken.
Really hope someone can help. I would greatly appreciate it...
Thank you!The fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
RecBoot and Tinyumbrella are hacking tools.
Google "iPhone DFU mode".
Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it. -
We have problem wifi conection after update to ios 7.1 iPhone 4s
Dear All,
we've problems after iOS 7.1 software update Iphone 4S 16 GB, please give us a solution to the problem, thank youThe fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
RecBoot and Tinyumbrella are hacking tools.
Google "iPhone DFU mode".
Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it. -
After updating to IOS 7, my iphone won't connect to my Itunes
Alright, this is what's wrong. I have an iphone 4s, which has always been working perfectly, but I decided to update it to the IOS 7 when it became available.
Once I had updated, which took forever, it seemed to work just fine again although very different from what i was used to. No matter I thought, I'd get used to it.
Today I then plugged it into my 4 year old macbook (running OS X 10.5.8 and unable to update for some reason) and it said that my iphone couldn't sync with the itunes, that I needed to update to Itunes 1.11 or newer, but - and here's the kicker - the version of Itunes available on the apple site, won't work unless I have operating system OS X 10.6.8 or newer.
So basically, updating my iphone has made it much worse, has made my expensive macbook fairly useless, at least for updating my phone.
I'm just thankful that I haven't updated my Ipad yet, now knwoing that it won't work right after the update anyway.
Any suggestions or ideas as to what I can do? I really don't wanna go out and spend a fortune on a new laptop just so I can sync my itunes.
Hope someone can helpI Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer
Maybe you are looking for
-
Error in sales order creation using FM IDOC_INPUT_ORDERS
Hi experts, I am using FM IDOC_INPUT_ORDERS for IDoc processing for creating sales order. I have added customized fields over VA03 screen and to VBAP table. I am using user exit EXIT_SAPLVEDA_001 for populating these additional fields. Here I am wri
-
Lion crash while I am trying to ugrade from 10.6.8
Dear All I just upgrade form 10.5 to 10.6.8, successefully Now I am trying to upgrade to Lion. Then I inserted a disk with the dmg of Lion. It start but it always crash and I can not understand why. Here is the report, may be you can help me. Cheers
-
Parameter list of values doesn't open in PLUS
Hi, For some reason, if I run a report directly from PLUS the list of values from all the parameters in one specific report does not open, but it does open both in DESKTOP and through the application (which is PLUS). The original report had one folde
-
Hi, I have this exercise which I'm not sure how to approach: Evaluate the following expresion, where '+' menas "push the following letter onto the stack," and '-' means "pop the top of the stack and print it": "+U+n+c---+e+r+t---+a-+i-+n+t+y---+ -+r+
-
Purchase Requisition Field mandatory in External Service processing order
Dear Team, I am running one scenario, wherein i am creating an Corrective maintenance order and i am using control key for external Service processing and entering the services and its rate and releasing the order. Now While Releasing