Choppy Video When Running From CD

I burned a .MOV file to a CD and when I play it from the CD it is very choppy. How do I fix this so that the movie plays normally?
File Info:
Kind: QuickTime movie
Size: 82 MB
Dimensions: 1280 x 720
Codecs: H.264, AAC
Color profile: SD (6-1-6)
Duration 01:01
Audio Channels: 1
Total bit rate: 10,713
Encoding software: 4.0.1
Rating: 0
Thanks!

Yes, I know this will work but I want to know why it is choppy when playing from the CD. I have never seen this behavior with any other computer. Is there something wrong with the optical drive? Do I need to tweak some setting? Thanks.

Similar Messages

Choppy video when streaming from web-site

I have tried to stream video from the site http://portevergladeswebcam.com/ (this is for watching cruise ships and other maritime traffic and the site claims to be "High Definition Video"). If anyone wants to look at this site, do it in the daytime! When viewing the web-site over a home WiFi network, with a fully updated Playbook, the motion of the moving vessels is smooth for a few minutes, but then it becomes choppy. The vessels "jerk" along. I have test the Playbook simultaneously with a Motorola Xoom, connected to the same WiFi network, and the Xoom motion is smooth all of the time. Can someone tell me whether this shows a limitation of the Playbook, or is there something I might be able to do to fix it.
Thank you
Gordon1M

Yes, I know this will work but I want to know why it is choppy when playing from the CD. I have never seen this behavior with any other computer. Is there something wrong with the optical drive? Do I need to tweak some setting? Thanks.

ZBook 17 g2 - poor DPC Latency performance when running from z Turbo Drive PCIe SSD

I'm setting up a new zBook 17 g2 and am getting very poor DPC latency performance (> 6000 us) when running from the PCIe SSD. I've re-installed the OS (Win 7 64 bit) on both the PCIe SSD and a SATA HDD and the DPC latency performance is fine when running from the HDD (50 - 100 us) but horrible when running from the PCIe SSD (> 6000 us). I've updated the BIOS and tried every combination of driver and component enabling/disabling I can think of. The DPC latency is extremely high from the initial Windows install with no drivers installed. Adding drivers seems to have no effect on the DPC latency. Before purchasing the laptop I found this review: http://www.notebookcheck.net/Review-HP-ZBook-17-E9X11AA-ABA-Workstation.106222.0.html where the DPC latency measurement (middle of the page) looks OK. Of course, this is the prior version of the laptop and I believe it does not have the PCIe SSD. Combining that with the fact that I get fine performance when running from the HDD I am led to believe that the PCIe SSD is the cause of the problem. Has anyone found a solution to this problem? As it stands right now my zBook is not usable for digital audio work when running from the PCIe SSD. But it cost me a lot of money so I'd sure like to use it...! Thanks, rgames

Hi mooktank, No solution yet but, as of about six weeks ago, HP at least acknowledged that it's a problem (finally). I reproduced it perfectly on another zBook 17 g2 and another PCIe SSD in the same laptop and HP was able to reproduce the problem as well. So the problem is clearly in the BIOS or with some driver related to the PCIe SSD. It could also be with the firmware in the drive, itself, but I can't find any other PCIe drives in the 60 mm form factor. So there's no way to see if a differnt type of drive would fix the problem. My suspicion is that it's related to the PCIe sleep states - those are known to cause exactly these types of problems because the drive takes quick "naps" to save power and there's a delay when it is told to wake back up. That delay causes a delay in the audio buffer that results in pops/crackles/stutters that would never be noticed doing other tasks like video editing or CAD work . So it's a problem specific to folks who need low-latency audio performance (very few apps require low latency audio - video editing, for example, uses huge buffers with relatively high latency). A lot of desktops offer a BIOS option to disable those sleep states but no such option exists in HP's BIOS for that laptop. In theory you can do it from within Windows but it doesn't have an effect on my system. That might be one of those options that Windows allows you to change but that actually has no effect. One workaround is to disable CPU throttling. That makes the CPU run at full speed all the time and, I believe, also disables the PCIe and other sleep states. When I disable CPU throttling, DPC latency goes back to normal. However, the CPU is then running full-speed all the time so your battery life basically goes to nothing and the laptop gets *very* hot. Clearly that is not necessary because the laptop runs fine from the SATA SSD. HP needs to fix the latency problem associated with the PCIe drive. The next logical step is to provide a BIOS update that provides a way to disable the PCIe sleep states without disabling CPU throttling, like on many desktop systems. The bad news is that HP tech support is not very technical, so it takes forever for them to figure out what I'm talking about. It took a couple months for them to start using the DPC Latency checker. Hopefully there will be a fix at some point... in the meantime, I hope that HP sends me a check for spending so much time educating their techs on how computers work. And for countless hours lost re-installing different OSes only to show that the performance is exactly the same as shown in the DPC Latency checker. rgames

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support?

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

Failed to initialize Databank exception when run from OLT

HI All,
I've created a script with an associated databank,that runs perfectly fine when run from OpenScript. But when I run from OLT, the following waring is encountered.
Start failure message from agent "OLT Server": oracle.oats.common.databank.DatabankException: Failed to initialize Databank 'Forms.forms'
Stopped Autopilot because of error on agent "OLT Server".
Name of my DB is : forms
and Script name is :Forms
Please let me know the solution for this.
Regards,
Karthik
Edited by: user777720 on May 21, 2013 5:00 AM

Have you tried changing the parameter in the Assets/Databank "Save Path" from "Relative to current script" to "Relative to a repository"?
Regards, Ian.

Hizzing / bad sound when running from battery power (Ups)?:

Why is my computer (Imac) emitting a hizzing sound when running from the UPS (battery)? I am testing a offline UPS type: POWERWARE Eaton Protection Station UPS 500VA 250W. My Imac is suppose to use max 200 watts of electrity (Imac 24 inch. intel 2.8 Ghz, 4 GB memory). When running from AC there is no sound. When testing (pulling out the cord on the UPS the Imac starts emitting a disturbing hizz / sound)???

I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....

Hyperlink in pdf is missing when run from server.

Hello,
I create a link for a field in a report (using Hyperlink tab Hyperlink information). When I export the pdf from Crystal Report, I could see the link when mouse over the field. But when I run the report from opendocumentfrom server) , the link is missing. Does Crystal Report support hyperlink in pdf when run from server? Or do I miss anything?
Thanks for your help in advance.

Moving to BusinessObject forum

Jdbc connection blocks when run from jar

The following code establishes a connection EXCEPT when run from within a jar file:
String jdbcDriverName = "oracle.jdbc.driver.OracleDriver";
String dbConnectionURL = "jdbc:oracle:thin:@192.168.2.7:1521:PRISM";
String userName = "mdo";
String password = "mdpass";
// Load the JDBC driver and create a connection to the database
Class.forName( jdbcDriverName );
OracleDataSource dataSource = new OracleDataSource();
dataSource.setURL( dbConnectionURL );
dataSource.setUser( userName );
dataSource.setPassword( password );
connection = dataSource.getConnection();
When run from a jar file, the application does not execute beyond the line:
connection = dataSource.getConnection();
No exceptions are thrown, it just appears that getConnection never returns.
Do I need to do anything different to execute this code from within a jar file?
Thanks in advance,
Phil
<><

When building the JAR file, I inadvertently included files from two Oracle JDBC driver versions (1.2 and 1.4). I was building a single jar file with all files in it.
I am guessing same named files existed in both driver JARs and caused "confussion" when combined into the single JAR.
Still, I would have expected an exception to be thrown or a null connection to be returned instead if the thread just blocking.
Thanks for all replies,
Phil
<><

Microsoft Dynamics AX WebSession() is null in Enterprise Portal when running from a List Page.

Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page.
The WebSession() works for a detail page, but nor a list page in EP.
Does anyone know of a workaround to this issue?
Thanks.
Scott

Hello,
You should ask in the Microsoft Dynamics Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Scim makes leafpad take a while to load, except when run from terminal

Leafpad normally loads up in an instant. But with scim running (More specifically with the required environment variables exported. Scim simply running without the environment variables does not cause the problem, but then scim does not work.), although it shows up immediately, the scrollbar, menubar etc are greyed out for a few seconds and the program cannot be used until it is fully loaded.
I'm sure this is specifically a leafpad problem, because there is no noticable lag in other programs. (Mousepad for example is fine.) However, the fact that it loads immediately when run from a terminal scares me. Why doesn't gmrun (and the fvwm menu) work just like a terminal? Is there a possible fix to this problem?

droog wrote:
I'm not having this problem as far as i can see, I use fvwm and scim already so installed leafpad to test and it starts instantly from fvwm's menu or terminal.
from gmrun leafpad starts instantly too so maybe i'm missing something.
what are you exporting?
Just the normal:
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE="scim"
export QT_IM_MODULE="scim"

Subreport not displayed when Run from SAP Business One

We have a crystal report that displays a subreport when it is run from within the Crystal 2008 Designer but not when run from within SAP. Has anybody else seen this error? We have tried importing it into SAP and checking the connections of the report and subreport etc but to no avail.

Sastry,
The main report is a document layout with the sub report linked into it using the DocEntry key field from SAP. The subreport should display data based on that link.
This main report only has the one sub report and when you preview in Crystal it returns data, when you preview using the same criteria but inside of SAP, it is not displayed.
Thanks
Mark

Create trigger not audited when run from sql developer Version 3.2.20.09

Creating or editing a trigger is not being stored in the audit table when run from sql developer.
Here is a sample script to show the issue:
Grant Connect,create table,create trigger To testuser Identified By testuser;
create table testuser.testtab(t1 number);
Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';
CREATE OR REPLACE TRIGGER testuser.testtab_bi_trg BEFORE
Insert
ON testuser.testtab FOR EACH ROW
begin
null;
end;
Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';
drop user testuser cascade;
If I run the script from sql developer the CREATE TRIGGER statement does not get audited.
If I run the script from sql plus or All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.
If I edit the trigger from sql developer the CREATE TRIGGER statement does not get audited.
If I edit the trigger from All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.

DoyleFreeman wrote:
Not sure what you mean by "perform the audit".
Have you tested my script? Does the "Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';" increment by 1 after each of the ddl statements or only after the Create table statement.
Your question doesn't have ANYTHING to do with sql developer and should be posted in the Database General forum
https://forums.oracle.com/community/developer/english/oracle_database/general_questions
Yes - and it works just fine once you ENABLE AUDITING. Your scripIt does NOT include the statements or code used to ENABLE auditing and, specifically, enable auditing for triggers.
Auditing doesn't just 'happen'; you have to enable it and you have to specify any non-default auditing that you want to perform.
Have you read any of the extensive documentation about auditing to learn how to use it?
See the Database Security Guide
http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm
Also see 'Auditing Functions, Procedures, Packages, and Triggers
http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm#BCGBEAGC
And see the AUDIT statement in the SQL language doc for how to specify auditing of specific operations.
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_4007.htm
Select count(*) From Dba_Audit_Trail Where (Owner='SCOTT' or username = 'SCOTT')
and action_name = 'CREATE TRIGGER';
COUNT(*)
0
audit create trigger by scott
CREATE OR REPLACE TRIGGER emp_copy_bi_trg BEFORE
Insert
ON emp_copy FOR EACH ROW
begin
null;
end;
Select count(*) From Dba_Audit_Trail Where (Owner='SCOTT' or username = 'SCOTT')
and action_name = 'CREATE TRIGGER';
COUNT(*)
1

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Java application behaving differently when run from netbeans

Hi,
When i run my program from netbeans it receives packets from ip addresses which are not in my subnet
but when i run it from outside netbeans it doesn't receives packets from ip addresses which are not in my subnet.
Can anybody explains why my application is showing different behavior when run from netbeans and when run independently?
Thanks.

Bingo! My script started the rmiregistry and continued on to start the servers. Apparently, it was too quick. I put a 10 second delay after the rmiregistry startup and all is working as it should.
Thanks for your help. You get the Duke dollars if I can figure out how that works.

Choppy Video When Running From CD

Similar Messages

Maybe you are looking for