Chord Track and Previous Midi/Audio Tracks

How do I include loops in some tracks which are transposed using the Chord Track while leaving previously created midi tracks untransposed? I've tried a couple of different ways but everything gets transposed. So, of course, it sounds awful.

Any chance this is in the wrong forum?
Soundtrack? Garageband?

Similar Messages

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Using avid m-audio fast track and avid m-audio fast track solo together

I Wanted to use avid m-audio fast track and avid m-audio fast track solo together so that I can get 4 inputs
i I tried to select it, but could enable any one only. How can I use them together??

You can use only one device at a time I Logic. However, in the Audio MIDI Setup utility (Applications>Utilities) you can create an aggregate device, which effectively combines multiple devices into one "virtual" device, which you can then choose in Logics' coreaudio device setup.
How to combine multiple audio interfaces by creating an aggregate device

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

Global Chord Track and Marquee Tool

Hi there,
I wanted to select some Chords on the global chord track, but the marquee tool doesn't seem to work here. When i click & drag (with the marquee tool, of course!), no marquee will draw, but the first chord that i touch is selected and pulled away from it's position.
I consider this a bug, but maybe it's a feature - can somebody help me?
Fox

Bump.
No ideas, anyone?
Fox

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play. How do you report a problem with a mandatory apple app?

Audiobooks purchased from Audible.com. They play on iTunes on my computer. They have been playing on my iPod Classic until two days ago. I'm in the middle of two books and now one does not keep track of where I am and the other does not play. I also have other books not playing on the iPod that use to play. They all play on iTunes on my computer.

Sources with 5.1 and 2.0 audio tracks in file

I have a quicktime file that contains 8 audio tracks - the first is 5.1 (i.e. 6 channels), the second is 2.0 (i.e. the stereo downmix of the 5.1).
Tracks 3-8 are mono iso channels
Is there a way of PPro correctly interpreting the tracks as such?
Currently it defaults to presenting them as 3 x 5.1 tracks and modifying the audio channels offers the options of them all being 5.1 or all stereo or all mono etc

looks like when changing the audio channels its all or nothing, so all 5.1 or all stereo/mono. i was able to make a multichannel sequence and then modify the audio channels of the video clip. i set the audio tracks to 1, then made the audio channels 5.1 and brought in just the 5.1 track, then made it stereo selecting ch7/8 and brought in just the stereo track. i changed the mixer to send the stereo track to ch7/8 for export too. but now on export it wants to export as 5.1 or multichannel 8 mono/stereo. so even while getting it configured for the timeline, the export isn't smart enough to export 5.1+stereo... maybe im missing something, or premiere is really crippled for audio.

How can I delete the audio track from a clip and have no audio associated?

the clips I insert always add an audio track,and seem to be linked to video track.I just want to delete audio tracks,and have no audio track associated with the original clips .
How do I do this ???

Second time this question came up today.
Click the a1/a2 buttons in the patch panel at the head of the timeline to decouple the audio from A1/A2. Then edit the picture into the timeline.

How do i remove buzz and hiss from audio track?

I'm using Premiere Elements 13, Windows 8, 64 bit
My original film has some hiss and buzz that I would like to remove. I tried applying DeNoiser and New Blue Hum Remover, but neither seemed to make a difference. Perhaps I need to tweek the tools to make them suppress more of the unwanted sound? Any suggestions are welcome. Thanks.

aperture14
Just some quick things to check out for now.
If the Premiere Elements audio effects are not working for you, please check out the noise removal offered by the free audio editor named Audacity. Have you used that before?
http://audacity.sourceforge.net/
Here are Audacity suggested how to. Think noise reduction rather than noise removal.
http://forum.audacityteam.org/viewtopic.php?f=50&t=70063
http://www.makeandbreakeducation.com/audacity-remove-hiss/
Please check out the descriptions of the options of the New Blue Hum Remover and other relevant audio effects in the Premiere Elements reference effects
http://helpx.adobe.com/premiere-elements/using/effects-reference.html#audio_effects
To be continued
ATR

Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

My midi/audio interface Edirol PCR 1 won't work with Yosemite and Roland have no driver update. Is this the end of the line for this device.

My midi/audio interface ( Edirol PCR1) will not interface with Yosemite 10.10 and Roland have no driver update, is there any fix for the problem or is the end of the line for this device.

Same problem here, what a shame as this has been my favorite portable keyboard for ages. Whenever I see one in a store(very rarely) I'll grab it.

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

When you are playing a song back and it says audio overload and then stops playing, what do I have to do to have it play all the way through?

System Overload.
The audio engine was not able to process all required data in time.
(-10011)

Much food for thought there - and, welcome back, Erik.
I've had an interesting occurence of the System Overload message on a recent project; I had a software instrument track with a lot of FX plug-ins and always got the message as soon as the playhead hit the first region on the track, which is no mystery. I bounced out the track and put the audio file on a new audio track, removed the plug-ins from the old track and then deleted it. I also changed the format of the song and inserted a new part at the beginning. The thing is, I still get the overload message at exactly the same point as it used to occur before, which seems odd.
It only occurs the first time I play it through, so its not a problem as such (one of those things I can live with) but it would be interesting if anyone could shed any light...

Drag and drop FLAC audio into iPod to convert and add?

I manually sort my music as albums in folder directories. I have never liked how iTunes wanted to sort my music back in 2005 and I don't like it any more today.
I recently got a 6th gen iPod Nano via the 1st gen iPod Nano replacement program and I am disappointed in how I cannot use Winamp to manage my playlists anymore. Winamp would automatically transcode incompatible FLAC audio into MP3 before transferring onto my 1st gen Nano.
I have my iPod options under iTunes set to automatically convert higher bitrate audio to 192kbps AAC, but dragging and dropping FLAC audio into my iPod gives an error message that prevents me from adding anything.
I thought maybe I had to import my audio into iTunes' library first, but scanning for media adds every audio file including system and program audio files to my library, which really clutters things up. It treats each artist as an album, so compilation albums of 30 audio tracks from 30 artists appear as 30 individual albums in my iTunes library. Most cumbersome.
I am also appauled in how it did not detect or support playback of FLAC audio. I am not willing to convert my entire library into a proprietary lossless audio format just because iTunes wants me to when other programs and I were getting along so well without iTunes and my 1st gen Nano.
Anyway, what I am hoping to achieve is to find a streamlined way to convert FLAC audio files into MP3 or AAC while I am transferring them to my iPod without having to involve another program to manually convert before adding. This is a huge convenience factor for which I am regretting having my 1st gen Nano replaced. I will admit that I am perhaps being overly stubborn here. Maybe I'll just sell this 6th gen Nano while it's still pristine and get a Sansa Clip or something. Apple products have become too stifling and I won't be surprised if there was no way to achieve what I am asking to do here, so maybe this ends up a being more of a rant than a search for answers.

foobar2000 with the ipod plugin will allow you to drag/drop FLAC files and when it syncs the ipod, it converts the FLAC files on the fly. MUCH better than dealing with the crappy iTunes interface and having to pre-convert the files. I absolutely loathe iTunes and it just gets worse and worse!

Why can I no longer drag and drop .mid files into GB?

I can no longer drag and drop .mid files into GB. When I try, the track files flash and disappear. Please help
Mac mini Mac OS X (10.4.6)

found solution, thanx everyone

Chord Track and Previous Midi/Audio Tracks

Similar Messages

Maybe you are looking for