Chorus effect question...

So ive been having trouble getting the chorus effect used in rap vocals....i spent hours browsing the net looking for answer. Most of them say stuff like re record the chorus which isnt wat im lookin for. Ive tried using chorus vst plugins...but the all make it sound robotic/metalic...if u listen to a rap song the chorus voices are perfectly in sync without sound robotic. Ive also tried over lapping vocals of the same kind but all that does is increase the volume...does anyone kno how to do this? Or any vst plugins thatll do it for me?? Im using adobe cs.5.5 ive got good quality mic ect....

donellbard wrote:
Most of them say stuff like re record the chorus which isnt wat im lookin for.... if u listen to a rap song the chorus voices are perfectly in sync without sound robotic.
Generally what 'they say' is indeed correct. What you have to do is re-record the vocal - or the part you want out of it - over and over again, each time trying to get it perfect. What happens is that invariably, it isn't quite perfect each time, and that's what gives rise to it sounding perfectly in sync, only not quite - if you see what I mean. If you are going to do this properly, then you change your position in front of the mic a bit, move slightly away, change the mic position, etc. And finally pan it slightly left and right of your main vocal, so it's very slightly detached from it.
It's possible that you might be able to achieve something similar with a plug-in, but it would have to alter the timing of phrases back and forth a bit, in order to achieve the same result, preferrably without screwing with the pitch too much. I'm not personally aware of any that can do this, but there again it isn't something I need to do very often. It really does work best if you re-record.

Similar Messages

  • How to create a warm full chorus effect on a vocal track? What effects, plugins or methods to use?

    Hey, I am using Logic pro 9 and have been for quite sometime now. The reason I am here today is because I want to know how to create a warm, more full, (almost doubling) chorus effect for my vocal hooks for the hip-hop tracks that I create. I have always heard that type of effect on hooks and never knew how they did it. For example in this song (This song is not my song, excuse the language but this is the type of effect i am looking for. Go to 1:12 of the song)
    http://www.youtube.com/watch?v=5aok9Hq7GQ4
    This is what I am looking for. PLEASE SOME ONE HELP I WOULD REALLY APPRICATEIT!! Thanks

    True, the equipment that I am using does matter and at the moment I am only using a usb microphone with no pre amps or audio interface. I was asking that question to know what methods people use to create that chorus  effect. What I did for the time being until I get my new set up I had a main vocal track that was centered and had no effect on it, then made 2 other copies so I had 3 tracks all together I panned one track all the way left and the other track all the way right then I applied the stereo spreader to the two copied tracks and turned the mix 76% channel delay 250 same intensity 100% and speed 1.644 Hz. Then I manually moved the tracks so that the left panned track came first then the main track then the right panned track. It was very small moves not to the point were you could tell just gave it that chorus effect. Do you think those were the right things to do? So its close almost there and maybe with the new setup it will be what I am looking for. But PLEASE KEEP COMMENTING EVERYONE HAS THERE OWN METHODS I AM CURIOUS TO KNOW YOURS!

  • Edit to tape audio promlem - sounds like "chorus" effect

    I have tried to Edit to Tape an HDV Sequence, down converted to SD, to a Digibeta deck.
    When I monitor (headphone out of digibeta deck) while recording it sounds normal. When I rewind and check tape it sounds like the audio is "doubled up", almost like a very short chorus effect is on the audio. as well as this I can hear what sounds like tape crackle now and again.
    However - when I do a straight crash record from the timeline - the audio plays back fine, no crackle.
    So thinking it was an edit to tape settings problem i clicked on the audio button in the edit to tape window and notice audio was set to ALL ON. I changed this to A1 and A2 on, thinking that my extra audio tracks (which I had disabled, these where the original audio, not the OMF exported stereo mix) were somehow going down the SDI anyway...
    No luck - did the edit to tape again and still sounded the same.
    My heart rate has returned to normal now as the network kindly will accept the crash record with non standard timecode - but I of course still want to find out the problem so this doesn't happen again next week....
    The Sequence was HDV 1080i, via a Decklink HD Extreme Capture Card, set to down convert to anamorphic 16:9. Sony Digibeta DVW-A500P deck.
    Anyone know what the problem could be?
    thanks
    Hugh

    for the benefit of anyone who searches for forum for a similar problem - it appears to have been a sync issue. changing "out ref" to "input video" appears to have fixed it.

  • If you need help quickly... Guideline for posting an effective question.

    Whenever you have a question that you would like answered, do pose that question effectively.
    First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
    The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
    Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
    Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
    Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
    Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
    Last:
    Everybody has to learn, has the right to ask questions and be helped.
    If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
    I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
    The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
    These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
    So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
    1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
    2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
    3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
    4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
    5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
    6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
    7. Download Process Explorer , and either post a screen shot or a link to the results.
    8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
    When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
    If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
    Hope this helps to post more meaningful questions and get an answer much quicker.

    Whenever you have a question that you would like answered, do pose that question effectively.
    First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
    The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
    Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
    Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
    Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
    Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
    Last:
    Everybody has to learn, has the right to ask questions and be helped.
    If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
    I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
    The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
    These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
    So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
    1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
    2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
    3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
    4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
    5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
    6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
    7. Download Process Explorer , and either post a screen shot or a link to the results.
    8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
    When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
    If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
    Hope this helps to post more meaningful questions and get an answer much quicker.

  • Channel Changing effect question.

    Question for the professionals:  How can I create a “channel change” with distortion, etc. effect on Final Cut Pro?  I need it for a sketch so with each segue, or scene, it looks like the “viewer” changed the channel.  Any help would be greatly appreciated.
    Thanks,
    Matt

    Why not just follow Christina's original response - you should be able to make what you need...
    http://library.creativecow.net/articles/smith_stephen/badTV.php
    Patrick

  • Browser and transition/effects questions

    Sorry Guys n Gals, me again!
    Simple q's for you all...
    Firstly, when I view browser by "large icons" is there anyway I can arrange the clips by order they were captured? I can do this as a list but for some reason cant do it in "large icon" view!
    Secondly, when I apply a transition or effect can I preview it (like in i-movie) before rendering it?
    Thanks
    Alps

    Ta Gary.
    Bit of a bu**er that Apple didn't allow us to have order of capture easier on icon view!! I really dont think I have the patience to re-label all my captured clips after I've captured em!!
    Oh, and after I typed the [stupid] question of "how to preview effects/transitions" I realised how stupid a question it was. I think I've figured it out now!
    Now just wait for my next silly question/s............
    Alps

  • Spry Effects questions

    I have two (2) questions about using the Spry Effects script in a horizontal slide configuration.
    Question 1:
    In DW CS4 if I add the command <duration: 500,> the numerals turn red.  I also get an error in line ???? from DW which is the line the variable is on.  If I go ahead and accept the change I see the desired quicker slide in Firefox and Safari.  The default is 1,000 milliseconds so I am cutting it in half.  But!  In Internet Explorer 7 the script locks the browser window up.  Even if I revert to the saved HTML and JS files the problem still persists.  This problem also occurs if I set the duration higher than 1,000 milliseconds.
    This also happens if I upload the files to the Internet.  I was forced to redo the line in question and copy my saved SpryEffects.js over to my working directory.  This unlocked the file in Internet Explorer 7.  Any suggestions on how to get the quicker response time in Internet Explorer 7?
    Question 2:
    In Firefox I get a border around the button that enacts the Spry Effect.  I set the text decoration to "none" for both of the IDs for the images.  This thin line does not appear in Internet Explorer 7 or Safari 4.0.3.  My version of Firefox is version 3.5.3.
    The file can be viewed here.
    Thank you in advance.

    I have also found that the Spry works better in FireFox than
    IE7, when it comes to video
    http://www.catholicmemphis.com/catholicmensconference.html
    Check out this page and you will see that the Spry tabbed
    menu stops the video in FireFox but not in Explorer. I have seen
    this type of problem in a few forums, but know one gives an answer
    to those looking for solutions....

  • Silent film effects questions

    Hi,
    I'm shooting a film in which I'm trying to replicate the look of a silent film and have a few questions someone can hopefully help me with. (I'm using FCP 4.0)
    1. I'm trying to do an iris to transition between scenes, i.e. the screen will go black and the picture will diminish into a smaller and smaller circle, eventually leaving nothing but black. FCP 4 has an 'iris' transition, but it seemingly works in the opposite manner; a small circle of the next scene in the timeline (in this case an empty black frame) will start out small in the image and increase to cover the entire screen. How can I fix this to achieve the effect I'm going for?
    2. This one may seem stupid and there must be a very obvious answer, but I can't figure out how to go about it. I'm trying to make a silent film title card and have no idea how to make the border that's usually around them without it just looking like cheap straight lines. Any ideas?
    3. This isn't really related, but I shot using a wide angle lens and the lens is visible at the edges of the frame in all of my footage. I've been blowing the image up to about 106-108% (sometimes adjusting the center of the image) under the Motion tab in order to basically zoom past the edges of the lens in the image. Is there a better way to go about this, or is this really all I can do?
    Any help would be much appreciated. Thanks.

    1. After you apply the iris transition...dbl-click it to bring it into the viewer. You'll see a very tiny arrow towards the top right of the transition interface...click on it...it will reverse itself.
    2. You could create something in photoshop, or search your computer for 'matte' or 'mask'...see what's available. I know Digital Juice has gobs of them and you may have additional software installed that has something you could use.
    3. You might try vignetting the entire video...again, you may find a matte or mask somewhere on your computer, or you could create one using the 'Shapes/Circle (or Oval)', from the pulldown at bottom right of your viewer (has a film frame with an 'A' in it). Once you've tweaked it, just save it out as a .tif and import for use as a mask/matte. There are a variety of ways to incorporate it, including composite modes.
    K

  • Effects question

    hi! i have a quick question..i'm trying to learn motion graphics and effects..how would i apply a filter to a specific part of a video in final cut? (like make a baseball glow or something like that) thanks!!

    thanks! can you give a quick lesson on how to do this? i really appreciate it! < </div>
    Quickest route to effects competency: Hire it done and take notes.
    Second: Do the tutorials that come with FCP and Motion and LiveType.
    Third: Set your expectations lower.
    Fourth: RTFM. There's a great index, start with SPARK and REPLICATOR.
    bogiesan

  • LPX Filter and Effect Questions..

    Hi all - still somewhat new to LPX (10.0.6).
    With regards to filters and effects, there's two things I can't figure out how to do:
    (1) Apply an effect gradually, overtime. An example would be the EQ changing throughout a few bars.
    (2) Set a start point for filters that automatically reset after a specific number of bars. I'm using the Always Rising Filter preset for the basic Auto Filter and have it set to 8 bars. The problem is I can't tell it which bar to start with. It starts at measure 5 and goes to measure 12, I want it to start at 1 and go to 8. How can I change this?
    I know these are kind of amateur questions, I've googled and can't seem to find an answer. Thanks!
    Rebekah

    You could try automation. With a slowly changing eq for example...
    Say you've got an eq over a Ultrabeat pattern you've programmed in the tracks window and you want to do a slow eq change. Have a look under the Ultrabeat instrument in its channel strip. See the thing that says "READ" in a green box? Change it to "latch".
    Now, open your eq plugin and hit the spacebar to start your UB pattern playing. As it plays, move the parameter you want to change in the eq window.  Hit stop. Change automation mode back to "Read". A little yellow icon should come on in the Inspector area of the Tracks window next to your Ultrabeat instrument. That's showing that the automation is turned on.
    Now, magnify your view in the vertical plane (tool for this in the top left hand corner of your tracks window) until you can see the automation stuff appear below the representation of the midi notes in your Ultrabeat pattern. There should be a pull-down there that will show what you've just put in with automation. You now use that info to edit what you want the eq to do.
    That was a bit long-winded, I know...but you only have to learn the procedure of putting in automation once because it works pretty much identically for any automation function within LPX.

  • Fade effect question

    I can implement a fade in effect with a single image, but I
    cannot get the same code to work with the arrayed images generated
    in the "photoDemo" tutorial on the Adobe site. Sho Kuwamoto has a
    fade in working in his tutorial (
    http://labs.adobe.com/technologies/flexbuilder2/tutorials/#)
    though with different syntax (that I can't make work either), so I
    know the array isn't the issue. Why does this work in one, but not
    the other, example?
    Any help would be greatly appreciated. I'm using the FB3
    Beta for the moment.
    Thanks in advance.
    1) In this example, the fade out works fine ...
    <?xml version="1.0"?>
    <!-- Simple example to demonstrate the Fade effect. -->
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml">
    <mx:Fade id="fadeOut" duration="1000" alphaFrom="1.0"
    alphaTo="0.0"/>
    <mx:Fade id="fadeIn" duration="1000" alphaFrom="0.0"
    alphaTo="1.0"/>
    <mx:Panel title="Fade Effect Example" width="95%"
    height="95%"
    paddingTop="5" paddingLeft="10" paddingRight="10"
    paddingBottom="5">
    <mx:Text width="100%" color="blue"
    text="Use the Fade effect to show or hide the text and
    image. Use an embedded font when applying the Fade effect to
    text."/>
    <mx:Image source="photo.png"
    visible="{cb1.selected}"
    hideEffect="{fadeOut}" showEffect="{fadeIn}"/>
    <mx:CheckBox id="cb1" label="visible"
    selected="true"/>
    </mx:Panel>
    </mx:Application>
    2) In the itemRenderer ("thumbnails" here) of the "photoDemo"
    tutorial on the Adobe site (
    http://learn.adobe.com/wiki/display/Flex/1b.+Code+Files),
    it does not. It compiles and runs, but seems to ignore the effect
    call. Why?
    "thumbnails" ...
    <?xml version="1.0" encoding="utf-8"?>
    <mx:VBox xmlns:mx="
    http://www.adobe.com/2006/mxml"
    width="125" height="125"
    horizontalAlign="center"
    paddingBottom="5" paddingLeft="5" paddingRight="5"
    paddingTop="5">
    <mx:Fade id="fadeIn" duration="1000" alphaFrom="0.0"
    alphaTo="1.0"/>
    <mx:Image source="{data.thumbnail.url}"
    showEffect="{fadeIn}" />
    </mx:VBox>
    main ...
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute">
    <mx:Script>
    <![CDATA[
    import mx.collections.ArrayCollection;
    import mx.rpc.events.ResultEvent;
    [Bindable]
    private var photoFeed:ArrayCollection;
    private function requestPhotos():void {
    photoService.cancel();
    var params:Object = new Object();
    params.format = 'rss_200_enc';
    params.tags = keywords.text;
    photoService.send(params);
    private function photoHandler(event:ResultEvent):void {
    photoFeed = event.result.rss.channel.item as
    ArrayCollection;
    ]]>
    </mx:Script>
    <mx:HTTPService id="photoService" url="
    http://api.flickr.com/services/feeds/photos_public.gne"
    result="photoHandler(event)" />
    <mx:states>
    <mx:State name="panel1Zoomed">
    <mx:SetProperty target="{panel1}" name="width"
    value="831"/>
    <mx:SetProperty target="{panel1}" name="height"
    value="455"/>
    <mx:AddChild relativeTo="{panel1}"
    position="lastChild">
    <mx:TileList x="9" y="55" width="791" height="353"
    dataProvider="{photoFeed}"
    itemRenderer="thumbnails"></mx:TileList>
    </mx:AddChild>
    </mx:State>
    </mx:states>
    <mx:Panel x="10" y="10" width="542" height="75"
    layout="absolute" id="panel1" resizeEffect="Resize">
    <mx:Label x="10" y="10" text="Keyword:" width="63"/>
    <mx:TextInput x="116" y="8" id="keywords"/>
    <mx:Button x="307" y="8" label="search"
    id="keywordButton"
    click="requestPhotos();currentState='panel1Zoomed'"/>
    </mx:Panel>
    </mx:Application>

    I've never used this effect.  Maybe if you preload the image(s)...
    Go to Behaviors panel.
    Click the plus sign (+).
    From the drop menu, select Preload Images.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Ken Burns Effect question

    I am using iPhoto 5.0.4. When I select a number of photos (or even one photo) and select slideshow, I get the Ken Burns effect whether the KBE box is checked or not. How do I defeat the KBE? Sometimes it's great-- but I'd like the option for a plain old slideshow as well!
    Is there some preference that I need to enable?
    Thanks.

    Hi Randolf,
    Make sure it is unchecked on the toolbar and under the settings button

  • N-Sqaure effect Question

    Is there a way to apply different/multiple clips using the N-Square effect, as opposed to just multiplying the same footage? If not, is there an iMovie effect that is similar to N-Square that will allow multiple clips to be used in each square?

    bump to the top...

  • HTML effect question

    Hi guys,
    I am trying to work out how to do something with html and
    need a little help.
    On ebay, I have seen an effect that some sellers use. It is
    basically a box with text in, and say 5 buttons above it with for
    example, about us, payment, shipping, etc on them. Now, when you
    click one of these button, the content of the box below changes,
    obviously to something relevant to what button has been pressed.
    But with ebay, you can only paste in html from one page in
    dreamweaver, its not like ftp hosting where you can put up several
    pages and like to anoter page when one of the buttons is clicked to
    create that affect.
    So what I want to know is, how do you create this effect in
    only one page of Dreamweaver?!

    here is an example of what I mean:
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=110244482430&ssPageName=STRK:MEW A:IT&ih=001
    if you look about half way down the page there is a links bar
    with about us, payment, shipping etc across it and a table below,
    and if you click on the tabs you can see that the content of the
    box below changes but the page doesn't refresh.
    I took a look at the code but I can't for the life of me work
    it out. You can only use one long page of html for eBay listings
    and can't link to outside pages so how they are doing this is
    beyond me. Can anyone help?

  • IChat webcam effects question!!!

    hey everyone
    i downloaded the extra effects that ichat has
    i see that you can add your own pictures as a custom background on one of the effects pages
    i was wondering...
    is there anyway to add your own cut outs of pictures to add inFRONT of you? (like the clown one or statue of liberty)
    if i can add my own pictures i made cut out that can go in front instead of behin please let me kno!

    To add to the discussion, I have come a bit further in the troubleshooting. I set up my old 10.5 server on an additional machine and used it as slave dns server. The new DNS server in 10.6 can not resolve home.wiederhol.de. The 10.5.8 server can resolve it using the same DNS database:
    home:~ admin$ nslookup
    home.wiederhol.de
    Server: 192.168.1.200
    Address: 192.168.1.200#53
    ** server can't find home.wiederhol.de.home.wiederhol.de: SERVFAIL
    ^C
    home:~ admin$ nslookup - 192.168.1.201
    home.wiederhol.de
    Server: 192.168.1.201
    Address: 192.168.1.201#53
    Name: home.wiederhol.de
    Address: 192.168.1.200
    I assume that this is the problem.
    Best regards,
    Thomas.

Maybe you are looking for