Chose "encode selected video files" to create apple pro res, but only gave me audio. now files are gone.

Hello, I chose the "encode selected video files" from the finder to convert some H.264 files to Apple ProRes. It outputed only audio (but still as a .mov file). And I also selected to delete the source files after finished, so now the originals are gone and i'm left with only audio. is there any way to get back my original files?

Sounds like you selected Audio Only
If you regularly back up your system, you could locate the copy of the original file and restore it .
Russ

Similar Messages

  • Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

    Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
    We need it to be acceptable to all devices.
    Thank you!

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/iphone.html

  • Log and Transfer: Options besides Apple Pro Res 422 ?

    Hi,  I am now using a camcorder that records files to a card. When I use Log and Transfer in FCP, the resulting files default to Apple Pro Res 422, which are absolutely huge.  Is there a way to set this up to transfer to a smaller file type, maybe of a quality similar to HDV?
    Thanks, BOb

    There's a reason HDV files are small - they're highly compressed files.  Final Cut is a professional product - it's built for high quality video, which requires storage space.
    In some instances can change Log and Transfer preferences to transcode to ProRes422 LT, which is a lighter weight version of ProRes422.  The files will be smaller, but they probably won't be as small as you're hoping they will be.
    Open the Log and Transfer window.  On the upper region there will be a gear, pick that and pick preferences.  Find the camera type you're using and change the Target Format to ProRes422 LT if possible.  As you did not tell us what kind of camera this is it is impossible to tell which one you need to change.
    All that said, storage is pretty cheap.  If you don't do a whole lot of editing a 320gb G-Drive Slim for $80 would be a great investment.  If that isn't an option and you really need small files I would suggest editing in iMovie.  I believe it converts everything to H.264, which is very small in comparison to ProRes.  Don't try editing H.264 in FCP.

  • Exporting AVI to Apple Pro Res 422

    I am using Adobe Premiere Pro CS4 4.2.1 and I would like to export my source file (AVI) to Apple Pro Res 422. Is that possible?
    If not, which format do I export my video to be used on a Mac running Final Cut Pro. I realize I can export using Quicktime, but then Final Cut Pro would have to render the video. I am hoping to avoid the additional rendering step.

    Open the AVI file in MPEG Streamclip, and choose prores 422 as the export option, and see if that works.
    Here Is A Link To A Tutorial On How To Do It

  • Using the built in encode selected video files won't sync to iPad

    Hi, how is it that when I right click on a video file and choose 'encode selected video files' then select 1080p sometimes they will sync to my ipad and sometimes they won't. It seems odd that my ipad air can record and edit 1080p but mavericks encode option doesn't make compatible 1080p video files.
    The video files are recorded on a camcorder and I wanted to put them on my ipad to use ios's imovie.
    Any ideas would be very helpful.
    Thanks

    Restrictions are Off on the iPad. I was able to get the video onto my iPad by dragging and dropping it from the Playlist into the iPad on iTunes. I never had to do it that way before, but it worked. Very odd.

  • Apple pro res 422 file consuming more space than usual

    hi everyone!
    I've been  working with FCP 7 since 2008 and at the same time I started working with Canon T2 from 2 years ago and I haven't had any problems with my FCP workflow files, editing and output used to be H. 264 based files until I started to  have problems with my hd DSRL projects. Recently when editing the audio went out of sync and  I was suggested to change the Quicktime video settings from FCP 7 to imovie (which is th application I commonly use to create chapters and share to iDVD) this worked perfectly. It was the  first time I which I had  to  change the Quictime Settings to Apple Pro Res 422 The Out of sync problem was resolved but the space consumed by the file was enourmosly ncreased instead. ie. A 5 min project usually would take like a 500 mbs quicktime  file  and now using the Apple Pro Res 422 this 5 min project went up to 5.3 Ggs!! And also the exporting process is taking forever!! For instance I'm working  with a 30 min project and the Quicktime conversion never ends. It's taking about 12 hrs and is not taking  more than the 20% of the process. Is there something I'm doing wrong? I need help in a extremely urgent way!  Thank you all guys! And best regards from Mexico!!
    Mac Pro early 2008
    Processor  2.8 GHz Quad-Core Intel Xeon
    Memory  10 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon HD 2600 XT 256 MB
    Software  OS X 10.8.4 (12E55)

    >using the Apple Pro Res 422 this 5 min project went up to 5.3 Ggs
    That's about right for a ProRes 422 file. High quality video takes a lot of space. It's sufficient to use the lighter ProRes LT for the footage from your T2 by the way. Your MacPro can also have up to 4 hard drives for plenty of storage.
    Why are you using QuickTime Conversion?
    Exporting to QuickTime with current settings and self contained is the better way. Then you use Compressor to make your delivery format from that master. Compressor is faster because it can take advantage of multiple cores - FCP doesn't. It will also give you far more control and choice over the encoding.

  • Fcp forces me to render Apple Pro Res 4444 files when i drop on timeline

    i shoot with the canon 5d mark ii and i have been having problems making my videos easy to edit. I convert them from h.264 to the apple pro res 4444. when i take the files and then attempt to drag them into the project timeline, i am prompted to change the settings to match that of the video format. when i select no, all of the files require me to render before playback. when i select yes, i always get dropped frames and the video stalls and fails to play. selecting no and rendering is not time efficient at all and i know there is a better way to do this. any help or suggestions? i'm clearly doing something wrong.

    Hi -
    While it may seem counterintuitive, transcoding to a ultra-high quality, specialized format like ProRes 4444 actually, in most cases, counter productive.
    Converting your h.264 files to ProRes 4444 is like buying size 26 shoes for size 9 feet. Apple ProRes 4444 is there for specialized use by people editing large frame size images +WITH an alpha channel for each frame+. To properly play it back will require both a high horsepower computer and high speed disk drive array to support the data rate involved in that format.
    May I make a suggestion? I would be to convert your h.264 material to Pro Res 422. Even ProRes HQ is beyond what you need to handle your material correctly.
    When you convert your files to ProRes 422, and allow FCP to set the sequence to the same settings, you will find that you will be able to edit without rendering. And don't worry - the quality of your image is set by the h.264 compression, the conversion to Pro Res 422 will not degrade it.
    A frequent example given on these boards: if you take a can of beer, and pour it in a keg, you still have just a can of beer, but it is harder to carry around - and the keg certainly takes up more space.
    There is a very useful White Paper written by Apple that describes the various flavors of ProRes and their correct application at:
    http://images.apple.com/finalcutstudio/docs/AppleProRes_White_Paper_July2009.pdf
    Hope this helps.
    MtD

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • When I try to open a file I created in Pages, I get this: "The required index.xml file is missing."  This has happened many times and I have forgotten how I've worked around it.

    When I try to open a file I created in Pages, I get this: "The required index.xml file is missing."
    This has happened many times and I have forgotten how I've worked around it.

    That is wrong advice and you appear to have repeated it all over the forum.
    All Pages files no matter what version have the same file extension, .pages, despite being radically different formats and that is the problem. The System does not distinguish between them when you double click on the file, it opens the first version of Pages it encounters.
    You need to right click on the file and choose the correct App version for the file. Unfortunately there are no clues to tell you which is which.
    If you are unhappy with this and the removal of over 100 features plus the problems with transmitting files across devices, servers and different versions of OS X, rate/review Pages 5.5.2 in the App Store.
    Peter

  • Trouble with flickering after converting AVCHD files to Apple Pro Res 22

    Hi guys.
    I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
    But I am having trouble with the files after converting them to this format.
    Every 60 frames I have a blurred frame.
    This results in a flickering effect when watching the clip.
    The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
    I have captured a still shot of the frame here
    http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
    Here are the settings I am using for the conversion
    http://www.willpower.net.au/DOWNLOADS/Error.JPG
    Here is the converted file in Apple Pro Res 22 format with the flickering
    http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
    I'd appreciate any help that you can offer.

    Actually I think I might have found the answer.
    After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
    So I think something got lost when converting the files to apple pro res.
    I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
    I'll come back to this post after shooting and making a little test movie today.
    Thanks for your help.
    PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD)

  • I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

    I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

    The XML format Premiere uses is not supported in FCPX. The only way I know of that may work is to go through FCP7 and then use 7toX to get to FCPX.

  • Final Cut 7: Apple Pro Res Export Drops In File Size?

    Hello all. We are noticing a 30% drop in file size when, after importing a 5-minute Apple Pro Res HQ file into Final Cut and performing minor editing (essentially removing a few frames from the ends), the resulting export (also Pro Res 422 HQ) is noticeably smaller, going from roughly 2.5 GB at the start to 1.7 GB at the end. Has anyone seen this? Is this normal? Does it affect file quality? If so, is there a workaround? Thanks for any and all help!
    Sequence and imported clip settings both match and are at the highest quality. The original file was captured from a BetaSP into Final Cut as a Pro Res 422 HQ via a Sony DVW-A500 deck.

    Those numbers suggest the possibility that you captured 29.97 and exported 23.98. Any chance that's the case?

  • HT2731 Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

    Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

    The verification email will have been sent to the email account that you put as the primary email address on the account - log into that email account as you usually do and you should have an email from Apple.

  • Exporting FCE project to Apple Pro Res 422 HQ Quicktime conversion file

    Hi Folks,
    I have recently tried exporting an FCE project (HD 1080 16:9) as:
    1. Quicktime file
    2. Quicktime conversion using Apple Pro Res 422 HQ
    and noticed that the Pro Res file is 2Gb. larger than the standard Quicktime file.
    Does this mean the quality is 2Gb better? (it certainly looks crisp and clear)
    Should I be doing this everytime I export from now on?
    Any information much appreciated.  Regards.

    Transcoding your material from one codec to a higher quality codec will not improve the quality of your source material. You are always limited by the quality of the image prior to the transcode.
    If you have a pair of shoes you want to store, you can put them is a shoe box, or you can put them in a shipping crate - but neither method will improve the shoes.
    The shipping crate will just take up more space.
    The only possible advantage of transcoding your AIC sequence from FCE to ProRes would be:
    1) you force the need to repeatedly decompress and recompress the file  - ProRes will bear this better than AIC
    or
    2) you plan to use the file in an edit system that supports working directly in Pro Res.
    MtD

  • Apple Pro Res 422 SD Files

    Hey i was wondering what steps (if any) I can take to use Apple Pro Res 422 SD files in my older Final Cut version 5.1.4. Just wondering if there is some updates or codec I'm missing to be able to see the files with. Thanks for any help anyone can provide

    There is a decoder for ProRes...
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
    Shane

Maybe you are looking for