Chrome Browser doesn't display nav bar links
My nav bar works fine in other browsers but Chrome just shows a blank bar. Any ideas that might correct this?
What's the URL of your site so we can examine it first hand?
OT
Similar Messages
-
E61i internet browser doesn't display properly
Hello,
I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
Does anybody have a clue?It sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck. -
every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save
What site is doing this? 99% of the time it is a problem with the headers sent from the web server.
-
My safari browser doesn't display as it normally should
my safari browser doesn't display as it normally should with all the colors/animations/pictures. I've tried the 32 bit mode, I've tried restarting safari, I've tried and even after the update in safari and the OS, it still looks like this. What can I do to fix it?
Hi adidas --
Double check your Safari preferences.
Make sure in "Appearance" that "Display images when the page opens" is checked. -
Some browser doesn't display the MW page correctly
after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case. -
Scroll over highlight function not working on custom nav bar links
Hi - I've created a custom nav bar in iWeb (www.HollywoodRC.com). I have it set up so that the text highlights when scrolled over. This function works in iWeb but does not work on my published site in Safari; however, works in my published site on IE. Any ideas on how to get the scroll over highlight to work on my published safari site? All the links work properly.
Thanks,
SteveNo. Things must have changed. I created a hyperlink with a non web safe font, LedgerD, added a drop shadow and published. I also put the same link in a shape. You can see them in this test page: Page-1 . The two items are image files but they do not contain the link text. Very strange. The hyperlink text can't be selected nor dragged to the desktop like other links, like the Click to Play links on the page, however.
However, I don't know how IE will handle it. According to this IE emulator site, http://ipinfo.info/netrenderer/, IE can see the drop shadow. But it doesn't tell us how the links will work. -
Browser doesn't display the right web page
Hey everyone,
I have this problem with a web page that doesn't display
right. What happen was my client has a news web page that is being
updated once every week. The way I update it is changing the
content on Dreamweaver and copy the codes and pasting them on the
server interface, and resave them. Thus, over riding the old news
page.
Everything display right on my computer. The only thing is I
have to refresh my browser in order for the right page to show up.
Once it did, then it stays as that.
The thing is, my client still sees the old news page even
after I've replaced it with the new codes.
I've done this for him for over 3 months, and this problem
has never occur before.
I don't understand why it's like this. If this is happening
to him, wouldn't it be happening to other people's computer as
well. If it is, then it's bad news, cause no one would like to
always have to refresh their browser for the right news page to
show.
Could anyone explain why this is happening? And how would it
affect other users? Or is this even possible.
Thanks in advance, everyone.
JenIt sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck. -
Firefox doesn't display content, especially links.
This is my problem in a screenshot: http://d.pr/i/DjkB
The content isn't displayed and especially links. Links are always not there and sometimes text is displayed but all websites are disfunctional because of this.
Here's a link to a screenshot displaying how the same website should look like: http://d.pr/i/ZRvNDid you manage to find out which font Firefox is using in the case when text doesn't display?
You will have to remove or update that font.<br />
You can also check that font in Fontforge.
*http://fontforge.sourceforge.net/ -
Coloring email link differently from nav bar links
Hi: Please go to tedandada.com. Click on "contact us" on menu on the left. On the "contact us" page you will see two email addresses. They are black. I would like them to be red before they are even rolled over or clicked to open an email program.
How can I color them? I noticed that I can select and color ordinary text but I cannot select and color the email addresses because they are links.
I do not want to change the way the links work in the nav bar. I want them to stay as they are.
Thanks.
SKath and Murray:
Kath wrote:
How right you are Kath.
May I suggest something? I will do HTML tutorials at this site:
http://www.w3schools.com/default.asp
So -- Murray and Kath -- I am not stubborn. (Okay, I am stubborn --- but I am not hopelessly stubborn). Also I like to learn new things.
BUT - I would still like you to walk me through this one thing I want to do one step at a time - using the knobs and dials. In the meantime, I will do the HTML tutorials -- but obviously it is going to take me time to get the hang of it. So please humor me in the meantime.
All I want in response to this post is the FIRST STEP. After I do that, I will write again for the second step.
MY object is to color the links which automatically open a mail program: "[email protected]" and "[email protected]"- on the "Contact Us" page on the tedandada.com site ---- without affecting the behaviour of the links in the nav bar.
I just want these links blue. I am not interested in hover or visited effects for these two links. (Perhaps these are not even called links - as they perform an action of opening the users mail program rather than linking to a place on my site or an external site).
Okay so far -- I hope.
Step 1: I open the page "contact us" on tedandada.com
Step 2: Here it seems I have four choices to start with (using the knobs and dials)
a: I can open "External CSS" in the head section of the "contact us page."
b: I can open "page properties" on the "contact us" page
c: I can click on the "open CSS editor" in the upper right corner of the contact us window.
d: I can select the links I want to color and open the CSS palette.
So --- Which of the four choices above (a, b, c or d do I do first?)
Let's just start here. OK?
In the meantime, I AM taking both of your advice to learn some HTML - by doing the tutorials --- but until I get a handle on it, please bear with me and help me the bells and whistles way.
Thanks for your help and patience. -
Lighting effects filter doesn't display options bar (PS CC)
When I start the lighting effects filter in Photoshop CC (64 bit) it doesn't display the correct options bar so I can't choose options and not even quit the filter:
I had to think about this one. Open the Window menu, and recheck 'Options'.
-
Premiere Pro CC Media Browser doesn't display a RAID
I'm running PP CC 7.2.0 on a Mac (10.8.5).
I've added an additional RAID (OWC Mercury Elite Pro Qx2 - 16TB) to my Mac Book Pro Retina attached via USB 3.0. However, it does not show in the Media Browser.
Above shows view of my Local Drives.
Above shows view of mouse selected local drives. The OWC drive is "seen" by the Media Browser, yet I can't get it to "mount" as a Local Drive.
I have reset PP CC's prefs with a restart with SHIFT held down. I have unmounted other dirves, guessing that I had too many devices on the USB bus (a silly idea, really - but worth a test) to no avail.
Thoughts?Hi Alex
I ended up reformatting the OWC drive using File Utility and now it works fine. All I can think is that there's something Premiere doesn't like about how OWC's formatting utility works. The good news is that the drive works great when you finally get it running.
Sean -
Browser doesn't display websites full size..help!!
Hi
Both my browsers Safari and Firefox don't display webpages to the full size of the browsers. For instance when i enlarge my web browser the websites are either all left sided or centered with two large white margins left and right. How do i adjust the browsers to display webpages using the full browsing screen?
I remember having this issue when i first got my macbook pro but forgot what i did to correct the problem. Now i have the new IMAC and have the issue again:(
Thanks for your help.Welcome to the forums!
when i enlarge my web browser the websites are either all left sided or centered with two large white margins left and right.
Like this forum web page?
How large the web page appears in the browser is governed by whomsoever designed the web page. Nothing you can do about it. -
Hi folks,
I have created a template in CSS with seven pages created
from it. The navibar consists of a graphic rollover with the
'hover' state created as an animated .gif. (first time I've tried
this). I am having a strange problem though, when testing the
buttons in the browser to make sure there all work and corresponde
with each other, the links work once or twice and then just seem to
stop working i.e. not linking to the selected page at all.
I have double checked the .dwt file to make sure all the
links have been placed, which they have. However when I re-check
them in the DW8 'Select file' window the file isn't highlighted
anymore - so I need to re-select it. Has anyone any ideas why this
is happening or any way round this. I have re-started DW8 and my
Mac - just in case, however the same problem arises.
Has anyone else tried to do an animated .gif as a 'hover'
state? I cant believe this is a reason why the links wouldn't work,
or am I wrong?
Many thanks in advanceGive us a look at it then.
James Loudon
www.fatgraphics.com
websites::photography::video
"tommysauce" <[email protected]> wrote in
message
news:f87as8$kjp$[email protected]..
> Hi folks,
>
> I have created a template in CSS with seven pages
created from it. The
> navibar
> consists of a graphic rollover with the 'hover' state
created as an
> animated
> .gif. (first time I've tried this). I am having a
strange problem though,
> when
> testing the buttons in the browser to make sure there
all work and
> corresponde
> with each other, the links work once or twice and then
just seem to stop
> working i.e. not linking to the selected page at all.
>
> I have double checked the .dwt file to make sure all the
links have been
> placed, which they have. However when I re-check them in
the DW8 'Select
> file'
> window the file isn't highlighted anymore - so I need to
re-select it. Has
> anyone any ideas why this is happening or any way round
this. I have
> re-started
> DW8 and my Mac - just in case, however the same problem
arises.
>
> Has anyone else tried to do an animated .gif as a
'hover' state? I cant
> believe this is a reason why the links wouldn't work, or
am I wrong?
>
> Many thanks in advance
> -
Browser doesn't display applets (classes)
hi all,
i am sure every beginner faced the same problem
though i am not a beginner, i am facing this strange problem, and i can't figure out where the proble is .
i just started developing simple swing applications. first i want to try the examples given in a tutorial.
most of them are japplets (applets created by swing components)
Strange thing is that none of htem works on my browser WHICH DRIVES ME CRAZY !!
let me make my situation clearer:
i put the Japplet class file and the html file whick invokes the applet under the same directory
as far as i know , since they are in the same directory i don't need t to set the classpath , am i right?
well, if i open the html file directly from that directory, it can find the Japplet and it works
but when i put them in another directory under the root of tomcat 4 and try to access them through :
http://<hostaddress>:8080/applet.html
applet.html opens but can't find my applet class saying that app.class not found
the relevant html code is as follows:
<html>
<body>
<applet code=app.class width=100 height=50>
</applet>
</body>
</html>
what am i supposed to do?where am i wrong?
by the way to make sure i also added .; to my classpath
my OS is win 2000,
i am using jdk1.3.1
do i need something else to make them work
thanks for helping in advance :)
cheers :)Is it a typing error or not.
Your html code is
<applet code=app.class width=100 height=50>Is this really the code you use?
I am missing the " "
<applet code="app.class" width=100 height=50>If you don't use the "", app.class can not be found. -
Duck Duck go Browser doesn't display search results, how to fix it?
The same search using other browsers displays the results. But i want to use Duck Duck Go
Did you already try safe mode or clear the recent history?
*[http://mzl.la/MwuO4X Firefox in safe mode]
*[http://mzl.la/NZyoI8 Clear recent history]
Also try reset Firefox
*[http://mzl.la/MnSTZB Reset Firefox]
Maybe you are looking for
-
Getting error while creating condition type in SPRO
Hi , can somebdy tell me why i am getting the following error while creating condition type in SPRO No valid change license available for message /sapcnd/ and also while rule determination using condition type we are getting the following error. syst
-
I created a large document earlier this year in Pages 09 ... over 100 pages and it has screen prints, pictures and text boxes ... when I try to open it in the new Pages 5.5.1, all of these pics, text boxes, etc, are missing!!! I can open it in the o
-
COPA document not generated though after billing and accounting generations
I have an issue with one instant. For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics. COP
-
Fix for iTunes and Stuttering Audio Upon Opening Other Programs
This was answered for me in another mega thread, so I thought I would create it's own topic in hopes of helping as many people as possible. This is a fix for those that have the problem of iTunes 7 working fine alone, but when opening another program
-
I just purchased an IPad 2 for my daughter. I connect to wi-fi at home and nothing happens, no internet, no facebook, no safari, no itunes, no connection. I t keeps telling me no internet connection. It connects to wi-fi at my work and public plac