Chrome - have to disable security settings

When I launch my edge animate file and load in Google Chrome, it is saying that my site is not secure. I have to disable security settings to view.  Have I loaded the file incorrectly? What is the work around for this? I cannot have my users disable their security settings to view my site.

Hi James
We need more info on this to understand the problem. Do you load the Edge Animate runtime over Adobe CDN or use the runtime locally? (You can check about these option in publish settings). Can you please share your composition with us so that we can take a look at it and narrow down what is actually causing a security issue?
Also can you pl see if your issue is similar to this forum post : Publish folder not displaying site in Chrome
Thanks
Manigandan

Similar Messages

  • When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor.  How do I fix these?

    When I turn on my computer I get the following error messages:
    Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
    Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
    How do I fix these?

    Library/LaunchAgents: com.promethean.activmgr.plist
    Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
    Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
    HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
    These are the system extension errors
    "/System/Library/Extensions/AppleGraphicsControl.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
    "/System/Library/Extensions/BJUSBLoad.kext"
    "/System/Library/Extensions/EPSONUSBPrintClass.kext"
    I do not know what any of these do or how to fix them.  I have run multiple disk permission repairs & disk repairs.  The startup & system extension errors continue to come up.
    I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

  • Everytime I start up my MacBook Pro, I get this message.  'Insecure Startup Disabled.'  "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

    Everytime I start up my MacBook Pro, I get this message.  'Insecure Startup Disabled.'  "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

    Update your HP Printer drivers/software at their website or uninstall using the developers method.

  • I am facing with the following problem whenever i start my laptop.Insecure Startup Item disabled."/Library/StartupItems/MobileBrServ" has not been started because it does not have the proper security settings.

    I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
    Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.

    Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.

  • How do I deal with "StartUpItems if2k" has not been started because it does not have the proper security settings?

    Whenever I turn on or restart my MBP, a dialog box appears saying --> “/Library/StartupItems/if2k” has not been started because it does not have the proper security settings. 
    How can I fix this? 
    First, I searched online and found a site with a If2k_Remover_V2.zip file, but whenever I try to open the link, a page comes up saying,
    Forbidden
    You don't have permission to access /w/files/if2k/If2k_Remover_V2.zip on this server.
    Any thoughts on this?
    Also, I see the if2k folder in the Library/StartUpItems; is it something I can just drag into the Trash?  Or would that be a bad move?

    Did you ever figure this out? I just upgraded to Lion on my Air and I have the same issue.

  • Error message: ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings."

    I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
    Thanks!

    Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
    Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

  • Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not  have the proper security settings. Help!?!?

    Hello:
    I keep getting this message upon startup. Can't figure out how to address it. Here it is.
    "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
    Any suggestions?

    There's an invisible one name "Icon" according to the error message.
    Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder.  At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    killall Finder
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    killall Finder
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

  • What to do when you encounter "does not have the proper security settings

    What to do when you encounter: /Library/StartupItems/Qmaster" has not been started because it does not have the proper security settings. AND......../Startup Parameters.Plist ?
    I have a PowerMac G5 using Operating system 10.6.8
    I took this mac to  the Apple store, they reset my os software and I have been having problems eversince. Since this Mac weights about 50 lbs, I don't want to take it in a gain. But - I am 67 years old and don't really understand some lingo - so straight english would really help.
    I so appreciate any help I can get.

    >>I have no idea what all that means...
    rwxrwxrwx    root  admin
    It shows that the files are owned by 'root' & in the group 'admin', while being readable (r) , writeable (w) & executable (x) by user:root, group:admin and everyone else.
    Startup items must be owned by root, the group must be wheel, and they must only be writeable by root.
    You can't readily make the required changes via Finder, so you'll either need to reinstall the software that added them, remove (trash) them altogether (they start qmaster, used by fcp &/or compressor) or use Terminal & the 'sudo' command to alter the ownership & permissions.
    If you choose the latter - run these two commands in Terminal while using an admin account, you'll be asked to enter the admin password, which won't be echoed onscreen. Restart afterwards. It's important that you copy/paste these exactly.
    sudo chown -R root:wheel /Library/Startupitems
    sudo chmod -R ugo+rwX,go-w /Library/Startupitems
    However - your startup problems with the prohibited sign are unlikely to be resolved by this, although it should avoid the warning messages you describe.
    When did the startup problems begin  - after adding any new software or making other changes ?.

  • Hi! When I try to log on to Facebook a page comes up saying "Cookies are not enabled" I have checked my security settings and it says they are. help!

    When trying to log on to Facebook the page sayes "Cookies are not enabled"
    I have checked my security settings and the boxes for
    Accept cookies from sites
    accept 3rd party cookies
    are both ticked.
    Help!

    For other things to try, see the [[Websites say cookies are blocked]] article.

  • HT201413 I keep error 9 when i try to restore my Ipod 5.It seems to be that my device disconnects during the restore process, then error messege pops up. I have updated the security settings on my pc and it still doesn't work.

    Error 9 pops up when trying to restore Ipod 5. The problem seems to be that my ipod disconnects during the restore process. My ipod is stuck in restore mode so I can't access its update serever. I have already updated my pc and its security settings. Is there anything else i can try?

    Hello AS234,
    This error is typically indicative of a conflict with installed security software.
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Allen

  • Upgraded to Yosemite, Won't allow me to navigate JC Penny's web site. Have tripple checked security settings and cookie settings.

    Upgraded my i mac to Yosemite. Won't let me open the departments on JC Penny's web site. Never had a problem before the upgrade.  Checked my cookies and security settings as per JC Penny's I-T Dept.  Am I missing something?

    Which browser are you using?
    Have you tried a different one? Sometimes, not all websites are configured to be compatible with all browsers.
    I have no problem opening the jcp.com site and choosing different departments (women's, home, etc) with the latest Firefox browser.

  • How do I disable security settings on PDF fillable form?

    The PDF fillable form was made in Word and saved as a PDF. I tried copying it then bringing into Acrobat Pro X to make it a fillable form. Saved with Enabled Features but when opened into Reader I get a security warning restricting adding text or placing a signature. I've tried changing setting and can't figure out what is wrong or even if it's possible it fix this.
    Does anyone know how to fix this?
    Kwiley

    It is "The security settings on this document prevent adding text and /or placing a signature on it from Adobe Reader. To fill and sign this document you need to print it out."  These forms need to be fillable because they change and then my client places her signature or her bosses signature on the page.  Is there another way to do this?
    Thanks,
    Kathy

  • Everytime I start up my macbook pro get error message Insecure Start Up Item Disabled /Library/Startupitems/HPTrapMonitor has not been started because it does not have the proper security settings

    everytime I start up my computer I get error message
    Insecure Start-Up Item Disabled
    "/Library/StartupItems/HPTrapMonitor" has not been started because it does not have proper security settings

    Hope info from this article helps.
    http://support.apple.com/kb/TS3493
    Best.

  • I have changed my security settings but Firefox continues to block a site I regularly use, what can I do?

    Firefox does not allow me to access www.Kijiji.ca. I have unchecked the boxes related to blocking websites in Options and Security tabs but Firefox states "service is unavailable, try again later."

    The website loads fine for me, try reading [[Websites look wrong or appear differently than they should]]

  • How do I get a rid of the error message "Insecure Start-Up Items folder detected because the folder does not have the proper security settings?

    I recently upgraded my OS from 10.4.11 to 10.6.8, so that I could download iTunes to my new iPhone 5.  After upgrading to 10.6.8, I received error message about my Symantec Norton anti-virus security, so I upgraded that to security that's compatible with 10.6.8.  Now I receive the error message above, about my Start-Up Items folder.  There are currently no items in the folder.  How do I get rid of the error message above?  Thanks for any help.

    Hello,
    Resolution:
    To prevent the "Insecure Startup Items folder detected" message from appearing
    Open Disk Utility from /Applications/Utilities.
    Select the name of the volume where Mac OS X is installed (default name is "Macintosh HD").
    Click the Repair Disk Permissions button.
    After permissions repair is complete, restart Mac OS X and verify that the message no longer appears.
    http://support.apple.com/kb/TS3493?viewlocale=en_US

Maybe you are looking for

  • End of File reached error message when running report

    I am running this report in two different places.  On my own machine it seems to run fine however when I run it for a client on their server I get a message saying end of file reached and the report won't come up.  Any suggestions?

  • CF Mapping not working on linux

    We installed CF8 on linux, and my app ran fine. Then *something* happened, and now CF mappings are not getting recognised. I am not the admin for the box, and unfortunately there was a delay betwen it getting broken and me being able to look into it.

  • Question on Authorized Selection Values in Bex

    Hi experts Heres a little background on my problem.... I am currently doing my authorization using variables and authorization only kicks in @ I_STEP = 0. Which is after the user excutes the query.... Here comes the problem... at the selection screen

  • The iTunes notifier (exclamation point at the farthest left)

    The iTunes notifier (exclamation point at the farthest left)of the iTunes interface...that indicates a broken string...What is it called (so I can find faqs about them)? And most importantly, how can I remove ALL of the hundreds that have grown there

  • Upgraded and lost some fonts--restore?

    I created an InDesign File when I had CS2 installed years ago, and since then I've rebuilt my computer and installed CS4. When I opened that old InDesign File, I got lots of missing font warnings. So I take it that a bunch of fonts that came with CS2