Chromebook bluetooth

Hello,
I have a chromebook 14, and I am trying to use a MS Bluetooth mouse (Microsoft Intellimouse Explorer for Bluetooth). I can see the mouse when I open the bluetooth settings, but when I try to connect the mouse, it says 'connection failed'. The funny thing is, when I open the 'crosh' shell, and then the 'bt_console', I can see the mouse:
crosh> bt_console
[NEW] Controller 34:23:87:BB6:B2 Chromebook [default]
[NEW] Device 00:0D:3A:A4:3C:01 Microsoft Mouse
And I can connect using 'connect 00:0D:3A:A4:3C:01', and from then on the mouse works well.
When I connect the mouse and the press the 'Make/Break connection' button on the mouse, the connection also fails, but with a different message (sorry, system is in Dutch):
Verificatie geannuleerd tijdens verbinden met '00:0D:3A:A4:3C:01'.
In english, that would be: 'Verification canceled while connecting with ...'
Does anybody have a tip how to get the mouse working without the 'bt_console' hack?

Thanks for finding that it connects using the bt_console app! I've logged a bug against ChromeOS here: https://code.google.com/p/chromium/issues/detail?can=2&q=bluetooth%20microsoft%20mouse&colspec=ID%20...

Similar Messages

Chromebook 14 Bluetooth

I have a Chromebook 14 - q070nr. It doesn't find any bluetooth devices when it scans. I have three other bluetooth devices (cell phone, remote speaker and my car) . They all see each other and connect together. Sounds like I have a hardware problem?

Hi Richard909,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Chromebook 14-q070nr and issues with connecting to Bluetooth. Here is a link to using the bluetooth on your HP Chromebook. It shows you how to enable and connect. If this doees not help, please call our technical support at 800-474-6836. If you are calling within North America, the number is 1-800-474-6836 and for all other regions click here.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Chromebook 14 & Logitech Bluetooth Mouse

I'm trying to operate my HP Chromebook 14, with a Logitech Bluetooth Mouse.
The Chromebook model is 14-Q063cl.
The Logitech mouse model is M-RCQ142
The Logitech Mouse is recognized, and works correctly for a while, then randomly stops working.
It is necessary to Disable Bluetooth then re-"Enable" Bluetooth on the Chromebook, to get it to work again (for a few minutes).
What is the problem?

Which model are you using? I am using the Logitech Performance MX.

Got New AC Card, Can I Use old one for Bluetooth

OK, the title pretty much sums up my question. I got this ASUS wireless adapter
http://www.asus.com/us/Networking/PCEAC68/gallery/
and a new Nighthawk Netgear router. My question isn't about configuring them, but so far I've not seen BlueTooth mentioned. My computer, an HP Envy 700-216 apparently uses a wireless card, that is a 150 Mb/sec, that also handles the Bluetooth.
So my question is, can I keep the old card in, and somehow configure it to only do the Blue Tooth function in the computer, while allowing my new AC card, to function as the wireless adapter, in "AC" mode? And if so, how do you think I'd accomplish this?
Or should I just remove the other one? Is there a way to deactivate just the wireless portion, without disabling the Bluetooth?
This question was solved.
View Solution.

Hi,
You might run into an IRQ sharing problem with two network cards. I would suggest removing the wireless card and get the AC card working. If you need to pair Bluetooth devices with your PC then consider trying an USB Bluetooth adapter.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP ENVY Phoenix 810-270st CTO Desktop -Bluetooth and Windows 8.1

I recently purchased a Phoenix 810 with Integrated Bluetooth 4.0 and Wireless LAN 802.11a/b/g/n/ac featuring Dual-band (2.4 GHz and 5 GHz) 2 x 2 MIMO technology. when I purchased the system I used the Bluetooth to connect to external bluetooth speakers with windows 8.1. I could easily see this menu option in my network option in the control panel. Recently I tried to use the speakers but could not however they show in my system devices. I also tried to add new and discovered thar Windows is not longer showing anything with Bluetooth in the control panel.
I have downloaded latest drivers but Windows still does not recognize bluetooth in the control panel anywhere. Any idea why I could setup and pare bluetooth deviced and now I can't?

Hi,
I am running Windows 8.1 with Bluetooth and Bluetooth does not show in the Control Panel. Look for the Bluetooth icon on the task bar. See the below image.
Once you pair up and acknowledge the passcode on both devices this the following screen should appear (example).
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Envy 23 all in one Win 8.1 bluetooth doesn't receive photo from phone

Trying to upload a jpg file from my phone to my windows 8.1 Envy 23 All in One via bluetooth. The PC and phone pair up ok and phone shows it is sending. When the phone starts sending, the PC's bluetooth device status changes from not connected to connected. After about a minute, the phone says the transfer failed and the PC status goes back to not connected. The phones error message says request could not be handled correctly. Also, the bluetooth icon window doesn't ever include selections to receive file or send file. HP Support connected remotely, reinstalled the bluetooth driver, deleted the device, paired up again, but no change with the transfer. HP concluded it is a hardware problem and says to send the PC in for repair. (Still under warranty.) Doesn't sound like hardware to me, and I don't want to be without my PC and possibly have to reinstall all programs and data when it returned. Thinking of getting a cable to connect directly to the PC. Any ideas what might be wrong?

Hi,
Open up Bluetooth settings ---> Share and make sure that box to Allow remote devices to browse, send and receive pictures, music and other files is checked. The click on Open Bluetooth Exchange Folder -->right mouse click for properties, Share and the review your exchange settings.
Check the Permissions on the above image so that your know for sure what you are allowing for transfer types etc..
It is possible that the WIFI adapter is failing during a transfer process if the software is properly setup.
Be patient and Bluetooth transfers can be slow.
You should get a notification on the PC that the file was successfully received. Additionally, your phone should be indicating an up transfer.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Need Wireless adapter with Bluetooth for Dv7-4287cl

I have a DV7-4287cl and it did not come with Bluetooth on the network card. the built in Card is the Broadcom 4313, HP part number 593836-001. I cannot find any reference to a option to swap this card out for one with Bluetooth. I spent over an hour on the phone today with HP and they offered no help.
The product number of the Dv7 4287cl is: XZ031UA#ABA I don't know if the serial number is needed or not, so please let me know if this is important. I really need to get this resolved as an external USB BT adapter is not acceptable.
Thanks.

Hi,
I suspect that you may need the below part. The part number should be 537921-001 Bluetooth SB module. HP Partsufer didn't list the bluetooth part for your DV7 but did show it for my DV7-4100t. It 's a fairly complex installation process. You might want to get a quote from a professional that has access to the HP Partner Services Library.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP - Officejet 100 Wireless Printer Setup with Chromebook

I am considering on purchasing this printer to use in my dorm. I have an HP Chromebook 14 and wanted to know how to connect it to the printer. Does it just work with bluetooth straight out of the box after I insert my wifi settings? DO i just turn on Bluetooth and send the files? I don't have a desktop to install the driver, like most normal printers would require, so I am relying on Google Cloud Print and Bluetooth printing. There is no way to install a driver on my Chomebook because that is not how the are made to work. Is there any other way to set it up without have to install any drivers? Or will it just work once I connect it to either wifi or Bluetooth? Any help is helpful.

Hi,
Your printer isn't web enabled so may may not be able to setup google cloud print via blue tooth.
There is a HP 1200w NFC/ Wireless Mobile Print accessory for your OJ100 mobile printer to enable it to support wifi printing:
Here's the link that shows how to set up your OJ100 with the HP 1200w:
Here's a link on how to setup google couldprint for your non e-print enabled printer:
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Bluetooth on a Pavillion Elite (e9270f) upgraded to Win 8.1

I had been using a USB-based Bluetooth device on this machine as a System 7 OS. I just upgraded to Win 8.1 and the Bluetooth doesn't work with my Android phone anymore. Is HP going to release a driver for Win 8.1? Thanks
This question was solved.
View Solution.

Hi,
This site may have a Windows 8 driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion P7-1254 bluetooth

ended blue tooth in my tray on HP Pavilion P7-1254; how do I enabled it?

Hi,
Please explain what you mean by "ended bluetooth in the tray"?
It's probably still running but you just can't see the icon in the tray. Check the following setting.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Toshiba Chromebook

Hi all!
i've just bought the toshiba chromebook and i've just installed arch on it (it's easy since it has an x86 cpu and seabios). I red
https://wiki.archlinux.org/index.php/Ac … Chromebook to help me.
by the way, i've 3 important problems (or 2?):
1- i'm still not able to get my touchpad work (neither using the kernel patches described in the link above[assuming they are the correct ones for me])
2- i get tons of "resume error" if i try to poweroff the notebook after a recover from suspend mode.
(basically, i put the chromebook in suspend mode for a while, next i recover it and i can do my work, finally, if i try to poweroff, it gives me that error)
3- (i don't know if it's a problem) during the boot i get this error
usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
Hoping for aid!! XD
PS: i'm italian, sorry for grammatical or sintax mistakes!
Last edited by mark_1 (2014-02-15 16:38:17)

thank you all for support!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007bf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf7a000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Toshiba Leon, BIOS 12/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bf7a max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C800000 mask 7FFF800000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 write-combining
[ 0.000000] 5 base 00FF800000 mask 7FFF800000 uncachable
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x00efffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x00bfffff] page 2M
[ 0.000000] [mem 0x00c00000-0x00efffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x01000000-0x2fffffff]
[ 0.000000] [mem 0x01000000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0177c000, 0x0177cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37900000-0x37c77fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37486000-0x377fdb8f]
[ 0.000000] Move RAMDISK from [mem 0x37900000-0x37c77b8f] to [mem 0x37486000-0x377fdb8f]
[ 0.000000] ACPI: RSDP 000fdbb0 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 7bf840e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 7bf88690 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130725/tbfadt-202)
[ 0.000000] ACPI: DSDT 7bf84250 04431 (v02 COREv4 COREBOOT 20110725 INTL 20090123)
[ 0.000000] ACPI: FACS 7bf84210 00040
[ 0.000000] ACPI: HPET 7bf88790 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 7bf887d0 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 7bf88830 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 7bf89730 008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: SSDT 7bf89fd0 0005C (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0177d000, 0x0177dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7bf79fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0002ffff]
[ 0.000000] node 0: [mem 0x00040000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x00efffff]
[ 0.000000] node 0: [mem 0x01000000-0x7bf79fff]
[ 0.000000] On node 0 totalpages: 507399
[ 0.000000] free_area_init_node: node 0, pgdat c15d6640, node_mem_map f6506020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3725 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2191 pages used for memmap
[ 0.000000] HighMem zone: 280444 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00030000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00f00000-0x00ffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f64de000 s33408 r0 d23936 u57344
[ 0.000000] pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505623
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b726a4e0-dd32-4284-aa06-1634c120f63a rw quiet add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic lapic i8042.nopnp=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4062152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf7a)
[ 0.000000] Memory: 1997500K/2029596K available (4328K kernel code, 431K rwdata, 1280K rodata, 612K init, 952K bss, 32096K reserved, 1121776K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15e8000 - 0xc1681000 ( 612 kB)
.data : 0xc143a39e - 0xc15e7c40 (1718 kB)
.text : 0xc1000000 - 0xc143a39e (4328 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1396.841 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.08 BogoMIPS (lpj=4656136)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000055] AppArmor: AppArmor disabled by boot time parameter
[ 0.000056] Yama: becoming mindful.
[ 0.000072] Mount-cache hash table entries: 512
[ 0.000330] Initializing cgroup subsys memory
[ 0.000338] Initializing cgroup subsys devices
[ 0.000341] Initializing cgroup subsys freezer
[ 0.000343] Initializing cgroup subsys net_cls
[ 0.000345] Initializing cgroup subsys blkio
[ 0.000380] CPU: Physical Processor ID: 0
[ 0.000382] CPU: Processor Core ID: 0
[ 0.003066] mce: CPU supports 7 MCE banks
[ 0.003084] CPU0: Thermal monitoring enabled (TM1)
[ 0.003103] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.003297] Freeing SMP alternatives memory: 20K (c1681000 - c1686000)
[ 0.004396] ACPI: Core revision 20130725
[ 0.007470] ACPI: All ACPI Tables successfully acquired
[ 0.008807] ftrace: allocating 19323 entries in 38 pages
[ 0.020375] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053999] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[ 0.054007] TSC deadline timer enabled
[ 0.054016] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.054027] ... version: 3
[ 0.054028] ... bit width: 48
[ 0.054030] ... generic registers: 8
[ 0.054031] ... value mask: 0000ffffffffffff
[ 0.054033] ... max period: 0000ffffffffffff
[ 0.054035] ... fixed-purpose events: 3
[ 0.054036] ... event mask: 00000007000000ff
[ 0.080827] CPU 1 irqstacks, hard=f5cce000 soft=f5cd8000
[ 0.080830] smpboot: Booting Node 0, Processors # 1 OK
[ 0.091126] Initializing CPU#1
[ 0.096725] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096741] Brought up 2 CPUs
[ 0.096744] smpboot: Total of 2 processors activated (5589.17 BogoMIPS)
[ 0.098842] devtmpfs: initialized
[ 0.100378] RTC time: 8:35:39, date: 02/16/14
[ 0.100438] NET: Registered protocol family 16
[ 0.100661] cpuidle: using governor ladder
[ 0.100663] cpuidle: using governor menu
[ 0.100800] ACPI: bus type PCI registered
[ 0.100803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100870] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.100873] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.100875] PCI: Using MMCONFIG for extended config space
[ 0.100877] PCI: Using configuration type 1 for base access
[ 0.101778] bio: create slab <bio-0> at 0
[ 0.101921] ACPI: Added _OSI(Module Device)
[ 0.101923] ACPI: Added _OSI(Processor Device)
[ 0.101925] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101927] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103064] ACPI: EC: Look up EC in DSDT
[ 0.112086] ACPI: Interpreter enabled
[ 0.112098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.112105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.112122] ACPI: (supports S0 S3 S4 S5)
[ 0.112124] ACPI: Using IOAPIC for interrupt routing
[ 0.112149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112295] ACPI: No dock devices found.
[ 0.123591] ACPI: Power Resource [TNP0] (off)
[ 0.123630] ACPI: Power Resource [TNP1] (on)
[ 0.124131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.124169] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.124198] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.124314] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.124320] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.124556] PCI host bridge to bus 0000:00
[ 0.124560] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.124563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.124565] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.124568] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.124570] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.124573] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.124575] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.124578] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.124580] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.124583] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.124585] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.124588] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.124590] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.124592] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.124595] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.124597] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.124600] pci_bus 0000:00: root bus resource [mem 0x7ea00001-0xfebfffff]
[ 0.124602] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.124614] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.124742] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[ 0.124760] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.124770] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.124778] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.124898] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.124910] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit]
[ 0.125055] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.125078] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
[ 0.125148] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.125207] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.125256] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102
[ 0.125276] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff]
[ 0.125289] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff]
[ 0.125450] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000
[ 0.125471] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff]
[ 0.125483] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff]
[ 0.125645] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000
[ 0.125665] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff]
[ 0.125678] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff]
[ 0.125849] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.125866] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit]
[ 0.125941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.126001] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.126046] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.126120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.126236] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.126260] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff]
[ 0.126364] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.126426] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.126473] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[ 0.126688] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.126707] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.126716] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873]
[ 0.126732] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f]
[ 0.126741] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877]
[ 0.126750] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.126760] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff]
[ 0.126803] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.126897] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.126914] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit]
[ 0.126939] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.127053] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.127088] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit]
[ 0.127358] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.127384] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.127445] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.127504] pci 0000:01:00.0: supports D1
[ 0.127506] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.133434] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.133441] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.133456] pci_bus 0000:00: on NUMA node 0
[ 0.133655] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.133718] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.133776] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.133833] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.133890] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.133947] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134004] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.134061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134515] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.134566] Found 1 acpi root devices
[ 0.134611] ACPI: EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[ 0.134702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134706] vgaarb: loaded
[ 0.134708] vgaarb: bridge control possible 0000:00:02.0
[ 0.134749] PCI: Using ACPI for IRQ routing
[ 0.136409] PCI: pci_cache_line_size set to 64 bytes
[ 0.136462] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.136465] e820: reserve RAM buffer [mem 0x7bf7a000-0x7bffffff]
[ 0.136574] NetLabel: Initializing
[ 0.136576] NetLabel: domain hash size = 128
[ 0.136577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.136591] NetLabel: unlabeled traffic allowed by default
[ 0.136718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.136726] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.138753] Switched to clocksource hpet
[ 0.145219] pnp: PnP ACPI init
[ 0.145236] ACPI: bus type PNP registered
[ 0.145302] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145344] pnp 00:01: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145408] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.145412] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.145415] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.145425] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.145429] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.145431] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.145434] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.145437] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.145440] system 00:02: [mem 0x00f00000-0x00ffffff] has been reserved
[ 0.145444] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145632] pnp 00:03: [dma 4]
[ 0.145661] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.145700] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.145802] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.145806] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.145847] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.145918] system 00:07: [io 0x1000-0x10fe] could not be reserved
[ 0.145922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145955] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146003] system 00:09: [io 0x0900-0x09fe] has been reserved
[ 0.146007] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146055] system 00:0a: [io 0x0200] has been reserved
[ 0.146057] system 00:0a: [io 0x0204] has been reserved
[ 0.146060] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.146063] system 00:0a: [io 0x0880-0x08ff] has been reserved
[ 0.146066] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146111] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.146156] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.146206] pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.146316] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146498] pnp 00:0f: Plug and Play ACPI device, IDs INT33c7 (active)
[ 0.146516] pnp: PnP ACPI: found 16 devices
[ 0.146518] ACPI: bus type PNP unregistered
[ 0.183326] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183333] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.183344] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.183347] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.183350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183352] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.183354] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.183357] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.183359] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.183362] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.183364] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.183367] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.183369] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.183371] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.183374] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.183376] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.183379] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.183381] pci_bus 0000:00: resource 19 [mem 0x7ea00001-0xfebfffff]
[ 0.183384] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.183387] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.183431] NET: Registered protocol family 2
[ 0.183627] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.183647] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.183665] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.183682] TCP: reno registered
[ 0.183685] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.183691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.183752] NET: Registered protocol family 1
[ 0.183766] pci 0000:00:02.0: Boot video device
[ 0.184248] PCI: CLS 64 bytes, default 64
[ 0.184294] Unpacking initramfs...
[ 0.292644] Freeing initrd memory: 3552K (f7486000 - f77fe000)
[ 0.292882] apm: BIOS not found.
[ 0.292913] Scanning for low memory corruption every 60 seconds
[ 0.293222] audit: initializing netlink socket (disabled)
[ 0.293234] type=2000 audit(1392539739.293:1): initialized
[ 0.311209] bounce pool size: 64 pages
[ 0.311221] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.312898] zbud: loaded
[ 0.313020] VFS: Disk quotas dquot_6.5.2
[ 0.313081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.313295] msgmni has been set to 1717
[ 0.313574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.313610] io scheduler noop registered
[ 0.313613] io scheduler deadline registered
[ 0.313647] io scheduler cfq registered (default)
[ 0.313885] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.314005] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.314022] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.314024] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.314029] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.314044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.314063] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.314121] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.314123] vesafb: scrolling: redraw
[ 0.314126] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.314370] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4160k, total 4160k
[ 0.319767] Console: switching to colour frame buffer device 170x48
[ 0.325002] fb0: VESA VGA frame buffer device
[ 0.325017] intel_idle: MWAIT substates: 0x11142120
[ 0.325019] intel_idle: v0.4 model 0x45
[ 0.325021] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.325157] GHES: HEST is not enabled!
[ 0.325172] isapnp: Scanning for PnP cards...
[ 0.636722] isapnp: No Plug & Play device found
[ 0.636795] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.637673] i8042: PNP detection disabled
[ 0.638328] i8042: Warning: Keylock active
[ 0.639116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.639284] mousedev: PS/2 mouse device common for all mice
[ 0.639366] rtc_cmos 00:08: RTC can wake from S4
[ 0.639515] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.639546] rtc_cmos 00:08: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.639766] Intel P-state driver initializing.
[ 0.639782] Intel pstate controlling: cpu 0
[ 0.639801] Intel pstate controlling: cpu 1
[ 0.639872] drop_monitor: Initializing network drop monitor service
[ 0.640013] TCP: cubic registered
[ 0.640152] NET: Registered protocol family 10
[ 0.640380] NET: Registered protocol family 17
[ 0.640390] Key type dns_resolver registered
[ 0.640751] Using IPI No-Shortcut mode
[ 0.641181] registered taskstats version 1
[ 0.641618] Magic number: 2:54:574
[ 0.641700] rtc_cmos 00:08: setting system clock to 2014-02-16 08:35:40 UTC (1392539740)
[ 0.641935] Freeing unused kernel memory: 612K (c15e8000 - c1681000)
[ 0.641952] Write protecting the kernel text: 4332k
[ 0.641982] Write protecting the kernel read-only data: 1284k
[ 0.642388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.653011] systemd-udevd[48]: starting version 208
[ 0.655522] Linux agpgart interface v0.103
[ 0.657032] [drm] Initialized drm 1.1.0 20060810
[ 0.658355] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.658407] ACPI: Lid Switch [LID0]
[ 0.658477] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.658482] ACPI: Power Button [PWRB]
[ 0.658548] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 0.658552] ACPI: Sleep Button [TPAD]
[ 0.658603] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input5
[ 0.658607] ACPI: Sleep Button [TSCR]
[ 0.658685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 0.658689] ACPI: Power Button [PWRF]
[ 0.659253] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.659311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 0.664839] [drm] Memory usable by graphics device = 2048M
[ 0.664845] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 0.664847] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 0.664864] Console: switching to colour dummy device 80x25
[ 0.664978] i915 0000:00:02.0: setting latency timer to 64
[ 0.665372] i915 0000:00:02.0: irq 57 for MSI/MSI-X
[ 0.665384] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.665385] [drm] Driver supports precise vblank timestamp query.
[ 0.665478] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.724664] fbcon: inteldrmfb (fb0) is primary device
[ 1.295316] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 2.295200] Switched to clocksource tsc
[ 2.345249] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.365124] Console: switching to colour frame buffer device 170x48
[ 2.370651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.370653] i915 0000:00:02.0: registered panic notifier
[ 2.370672] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.425046] raid6: mmxx1 2695 MB/s
[ 2.481706] raid6: mmxx2 2750 MB/s
[ 2.538356] raid6: sse1x1 2265 MB/s
[ 2.595032] raid6: sse1x2 2737 MB/s
[ 2.651679] raid6: sse2x1 4583 MB/s
[ 2.708327] raid6: sse2x2 5557 MB/s
[ 2.708329] raid6: using algorithm sse2x2 (5557 MB/s)
[ 2.708331] raid6: using ssse3x1 recovery algorithm
[ 2.708523] xor: measuring software checksum speed
[ 2.741653] pIII_sse : 8588.400 MB/sec
[ 2.774981] prefetch64-sse: 9430.800 MB/sec
[ 2.774983] xor: using function: prefetch64-sse (9430.800 MB/sec)
[ 2.781015] bio: create slab <bio-1> at 1
[ 2.781924] Btrfs loaded
[ 2.814461] ACPI: bus type USB registered
[ 2.814495] usbcore: registered new interface driver usbfs
[ 2.814507] usbcore: registered new interface driver hub
[ 2.815091] usbcore: registered new device driver usb
[ 2.815797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.815985] ehci-pci: EHCI PCI platform driver
[ 2.816151] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.816162] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.816169] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.816184] ehci-pci 0000:00:1d.0: debug port 2
[ 2.817598] SCSI subsystem initialized
[ 2.819540] libata version 3.00 loaded.
[ 2.820077] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.820099] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe051f800
[ 2.828323] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.828670] hub 1-0:1.0: USB hub found
[ 2.828678] hub 1-0:1.0: 2 ports detected
[ 2.828837] ahci 0000:00:1f.2: version 3.0
[ 2.829262] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 2.829292] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.841655] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 2.841662] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm apst
[ 2.841667] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.842027] scsi0 : ahci
[ 2.842127] scsi1 : ahci
[ 2.842182] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 58
[ 2.842184] ata2: DUMMY
[ 2.842353] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.842357] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.842364] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.842453] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.842476] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
[ 2.842731] hub 2-0:1.0: USB hub found
[ 2.842745] hub 2-0:1.0: 8 ports detected
[ 2.843057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.843062] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.843307] hub 3-0:1.0: USB hub found
[ 2.843324] hub 3-0:1.0: 4 ports detected
[ 3.135078] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.161677] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.162151] ata1.00: ATA-9: SanDisk SSD i110 16GB, i221000, max UDMA/133
[ 3.162157] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.163264] ata1.00: configured for UDMA/133
[ 3.163536] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 i221 PQ: 0 ANSI: 5
[ 3.165691] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.165788] sd 0:0:0:0: [sda] Write Protect is off
[ 3.165794] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.165812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.166469] sda: sda1
[ 3.167348] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.195714] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 3.211779] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 3.212424] btrfs: disk space caching is enabled
[ 3.219564] Btrfs detected SSD devices, enabling SSD mode
[ 3.258862] hub 1-1:1.0: USB hub found
[ 3.258949] hub 1-1:1.0: 8 ports detected
[ 3.313576] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.314097] systemd[1]: Set hostname to <archie>.
[ 3.371286] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.371368] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.371386] systemd[1]: Starting Login Prompts.
[ 3.371400] systemd[1]: Reached target Login Prompts.
[ 3.371412] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
[ 3.371423] systemd[1]: Starting Remote File Systems.
[ 3.371433] systemd[1]: Reached target Remote File Systems.
[ 3.371444] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.371484] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.371495] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.371525] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.371534] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.371568] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.371578] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.371600] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.371610] systemd[1]: Starting Root Slice.
[ 3.371805] systemd[1]: Created slice Root Slice.
[ 3.371816] systemd[1]: Starting User and Session Slice.
[ 3.371902] systemd[1]: Created slice User and Session Slice.
[ 3.371914] systemd[1]: Starting System Slice.
[ 3.371983] systemd[1]: Created slice System Slice.
[ 3.371993] systemd[1]: Starting system-netctl.slice.
[ 3.372079] systemd[1]: Created slice system-netctl.slice.
[ 3.372090] systemd[1]: Starting system-getty.slice.
[ 3.372171] systemd[1]: Created slice system-getty.slice.
[ 3.372181] systemd[1]: Starting Slices.
[ 3.372192] systemd[1]: Reached target Slices.
[ 3.372205] systemd[1]: Starting Journal Socket.
[ 3.372258] systemd[1]: Listening on Journal Socket.
[ 3.372724] systemd[1]: Starting Apply Kernel Variables...
[ 3.373061] systemd[1]: Starting Journal Service...
[ 3.373398] systemd[1]: Started Journal Service.
[ 3.418232] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 3.428629] systemd-journald[117]: Vacuuming done, freed 0 bytes
[ 3.508856] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 3.509418] systemd-udevd[150]: starting version 208
[ 3.591546] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[ 3.715640] ACPI: Requesting acpi_cpufreq
[ 3.740506] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.741205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.798179] usb 2-4: new full-speed USB device number 4 using xhci_hcd
[ 3.812766] usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 3.962599] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.962604] ACPI: Thermal Zone [THRM] (47 C)
[ 3.975610] ACPI: AC Adapter [AC] (off-line)
[ 3.978210] usbcore: registered new interface driver usbhid
[ 3.978214] usbhid: USB HID core driver
[ 3.993579] ACPI: Battery Slot [BAT0] (battery present)
[ 4.032517] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 4.034541] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 4.034707] ACPI: Fan [TDP0] (off)
[ 4.035153] ACPI: Fan [TDP1] (on)
[ 4.035410] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.093541] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.098998] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 4.099058] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 4.099120] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 4.099496] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 4.101508] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 4.101631] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.101723] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 4.105312] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.105842] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.107120] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.108031] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.108443] iTCO_vendor_support: vendor-support=0
[ 4.111125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.111156] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060)
[ 4.111771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.123017] media: Linux media interface: v0.10
[ 4.132248] Linux video capture interface: v2.00
[ 4.142524] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.145486] microcode: CPU0 updated to revision 0x17, date = 2013-09-14
[ 4.159066] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.159122] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.160899] microcode: CPU1 updated to revision 0x17, date = 2013-09-14
[ 4.160961] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.183412] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 4.199701] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input15
[ 4.199850] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 4.200637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/input/input16
[ 4.200760] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 4.253340] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b433)
[ 4.257620] cfg80211: Calling CRDA to update world regulatory domain
[ 4.258825] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input17
[ 4.258905] usbcore: registered new interface driver uvcvideo
[ 4.258907] USB Video Class driver (1.1.1)
[ 4.272998] tpm_inf_pnp 00:0d: Found TPM with ID IFX0102
[ 4.274122] Bluetooth: Core ver 2.16
[ 4.274139] NET: Registered protocol family 31
[ 4.274141] Bluetooth: HCI device and connection manager initialized
[ 4.274149] Bluetooth: HCI socket layer initialized
[ 4.274152] Bluetooth: L2CAP socket layer initialized
[ 4.274164] Bluetooth: SCO socket layer initialized
[ 4.328004] usbcore: registered new interface driver btusb
[ 4.416370] ath: phy0: ASPM enabled: 0x43
[ 4.416375] ath: EEPROM regdomain: 0x6a
[ 4.416377] ath: EEPROM indicates we should expect a direct regpair map
[ 4.416380] ath: Country alpha2 being used: 00
[ 4.416381] ath: Regpair used: 0x6a
[ 4.424663] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.425328] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xfb800000, irq=16
[ 4.445314] systemd-udevd[160]: renamed network interface wlan0 to wlp1s0
[ 4.614754] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 8.181805] wlp1s0: authenticate with 00:23:cd:18:68:6c
[ 8.201384] wlp1s0: send auth to 00:23:cd:18:68:6c (try 1/3)
[ 8.203777] wlp1s0: authenticated
[ 11.760828] wlp1s0: associate with 00:23:cd:18:68:6c (try 1/3)
[ 11.764340] wlp1s0: RX AssocResp from 00:23:cd:18:68:6c (capab=0x401 status=0 aid=2)
[ 11.764389] wlp1s0: associated
[ 11.764420] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 11.764626] wlp1s0: deauthenticating from 00:23:cd:18:68:6c by local choice (reason=3)
[ 11.771280] cfg80211: Calling CRDA to update world regulatory domain
[ 12.034134] fuse init (API version 7.22)
[ 15.403667] wlp1s0: authenticate with 00:23:cd:18:68:6c
[ 15.415208] wlp1s0: send auth to 00:23:cd:18:68:6c (try 1/3)
[ 15.417728] wlp1s0: authenticated
[ 15.419690] wlp1s0: associate with 00:23:cd:18:68:6c (try 1/3)
[ 15.423205] wlp1s0: RX AssocResp from 00:23:cd:18:68:6c (capab=0x401 status=0 aid=2)
[ 15.423253] wlp1s0: associated
in particular
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b726a4e0-dd32-4284-aa06-1634c120f63a rw quiet add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic lapic i8042.nopnp=1
[ 0.637673] i8042: PNP detection disabled
[ 0.638328] i8042: Warning: Keylock active
[ 0.639116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.642388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

Bluetooth does not synch with YouTube video

I like to watch YouTube videos on my Chrombook. The sound from my bluetooth speaker does not synch up with the video. My Macbook and Fire tablet do not have this problem. I've tried 3 different bluetooth speakers, and the HP is the only device that does not synch properly.
I don't see any way of modifying bluetooth on the HP.
Has anyone else noticed this problem? Is there a fix?

Hi @59seank ,
Thank you for your inquiry.
HP does not support the Chrome OS.
Please see Google Chrome support.
Here are two links that should help.
Chromebook Support
Fix Chromebook issues
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How do I use a bluetooth headset with garageband?

How do I use a bluetooth headset with garageband? I can't get it to work after many tries.

I can pair the headphones with the computer but the sound from GB is distorted and muffled. I can barely hear it. The set works with iTunes, but not with GarageBand.

How do i use my Platronix bluetooth with iPhone 4 to listen to music.

How do i use my Platronix bluetooth with iPhone4 to listen to music.
Its a mono bluetooth paired with the phone.
I dont want to buy a new stereo headset but can i use this same one.

One way is to sync the contacts from the old iPhone to iCloud. Then when you turn on the new phone and set it up for iCloud and turn on the Contacts in Settings >iCloud, they will come to the new phone. http://www.apple.com/icloud/setup/

How do I make Iphone proritise answering with bluetooth rather than ringing on phone?.

Previously, when I received a phone call in my car, the bluetooth radio would ring and then I would take the call by pushing button on steering wheel. Ever since installing latest IOS the bluetooth device connects but the phone just vibrates (doesn't even ring) The radio shuts off but the audio ring does not sound. Have to answer the phone manually. Defeats the purpose of having handsfree!! I note that when I phone voicemail while in car the screen shows options to use bluetooth, Iphone or speaker phone. When I am in the car I JUST want to use handsfree bluetooth (it is the LAW!!). Is this just a glitch in the new operating system update? and if so, when will it be repaired?

You can't. If iPhoto is open when you connect the phone then it will offer itself from importing.
Regards
TD

Chromebook bluetooth

Similar Messages

Maybe you are looking for