Chromium for osx Marveicks  and chrome remote desktop cloud computing App!

Hello!!!
Good Day to Everyone.
I'm clkwong@ and cho leung Kwong@ in Hong Kong.
I have an imac and a macbook air , both of them is installed mac osx Marveicks.
I download chroimium for mac Marveicks on both machines and install chrome remote desktop on both machines.
When I have openned the chrome remote desktop and it was been logged in gmail account,  after accept the authority , then I choosed  the option in chrome remote desktop --> my computer.
It needs to input pin (any 6 numbers) and input again , then ok.
After that the cloud needed  to confirm the pin!
And then I  used the macbook air and opened chrome remote desktop and choose the logged in gmail account computer and
comfirmed the pin.
Amazing, something happened, I could use the macbook air to operate the imac.
For the above my experience of chrome remote desktop of chromium for mac osx Marveicksv use, I have an idea for remote access as follows :-
1. I can use iphone 5 series with 4G lte/advanced and apple remote desktop App for ios 7 to connect to home's apple computer through icloud.
2 . I can use iphone 5 series 4G lte and icolud with home's apple computer Internet share as wifi router to operate home's appliances which have wifi devices with App.
3. I can use iphone 5 series 4G lte and icloud  to operate with home's apple computer for 4K video downloaded from website and stored in home's apple computer with usb 3.0 external Hard Disk.
Thanks, Jesus loves.
reported by clkwong@ in cloud!!!

Hi Shay,
Thank you for posting in Windows Server Forum.
Please check that required ports is opened for remote desktop (port 3389)?
Are you performing remote desktop with IP address or Hostname?
Did you find any specific error for your case?
Also there is required network connection available. If you can successfully connect with IP address then there might be issue with Hostname resolution for your server. From your description it also seems that there are some credential issue occurs for you.
Please try with domain\username and verify. 
You can also try URI scheme for connecting, for more detail refer this article.
Remote Desktop Client URI Scheme Support
http://technet.microsoft.com/en-us/library/dn690096.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

    iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

         If they have set up port forwarding for you already then that is different.  In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients.  It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer.  I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
         I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
    The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
    First:
    ssh ipaddress -l adminusername
    (example: ssh 192.168.1.1 -l macadmin)
    Second:
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
    After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

  • Difference between Terminal server connection and MSTSC remote desktop connection

    Hi everyone , Wats the main difference between Terminal server connection and MSTSC remote desktop connection? Well both are used to connect a server remotely. right!
    Are there any much difference between them?

    RDP is a protocol and MSTSC is the RDP client.
    In the situation you are referring to, you use MSTSC (RDP Client) in both cases, but when you connect to a client PC (Windows 7, Windows XP, etc) you can only connect if nobody is using that PC at the moment, if you connect to a server you can work along with
    some other users. Server OS supports 2 connections by default, if you want more people you need Remote Desktop Services and RDS licenses.
    Thanks,
    сила в справедливости

  • In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download.  Can I reinstall the app without losing my music?

    In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download.  Can I reinstall the app without losing my music?

    The obvious way to resolve this on a computer would be to uninstall the app, then reinstall it, however on an iOS device that would cause all the data assoicated with the app to be thrown away.
    Make sure your iTunes library has the latest updates for all your apps, then backup and restore the device. This should pull back a fresh copy of the app from your iTunes library and then give it the data from your device backup.
    tt2

  • I dropped my phone in water and put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes

    And then put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes

    Put it in rice for another 4 days.

  • I am having trouble installing and using remote desktop client and admin on the same imac.  I need help?

    Can you give me a step by step on getting the client and the admin part of remote desktop to work?  I am new to this and I need for remote desktop to work to install the Faronics Deepfreeze enterprise console on the new imac in office.  The OSx version is 10.8.3  Any help will be greatly appreciated.  Also, when I go to install the admin, it says that the remote desktop client is not updated and I cant get mac app store to show any updates.  May be doing something wrong.

    This is what I usualy do to setup ARDclient on a client computer.
    on the client computer
    go to menu bar (white bar at top of the screen)
    click on the apple menu
    chose system preferences
    click show all button
    click Users & Groups
    click the lock to unlock
    click + to create a new account
    chose new account: type "administrator"
    name the user some thing applicable like "ARDuser"
    set a secure password
    click create account
    click show all button
    click sharing
    set the computer name to some thing descritpive that identifies the computer
    check remote login
    click on remote login
    set allow access for: "only these users"
    click the +
    chose the ARDuser from the list
    click select
    check remote management
    click on remote management
    set allow access to "only these users"
    click the +
    select the ARDuser from the list
    click select
    check: observe, control, genereate reports, open & quite applications, delete and replace items, start text chat or send messages, restart & shutdown, copy items
    click ok
    click the lock to lock system preferences
    click show all
    quite system preferences
    At this point you should be able to connect to the client using Apple Remote Desktop using the ARDuser setup above. Make sure the client and the ARD computer are on the same network the same way. IE both on ethernet or both on wifi. On the same internet conenction, if your were trying to conenct to a client over the internet there is more involved. 
    on the ard computer:
    open apple remote desktop
    from the left column select discover
    make sure the list is set to bonjour
    the client computer should show up on the list, with the name set above
    select the client from the list
    click control
    you will be prompted for the user/pass to log into the computer. that's the ARDuser setup in the steps above.

  • Intermittent Disconnects for clients of 2008 R2 Remote Desktop Services

    Hello, I have an issue that I am trying to work on for a client who is experiencing intermittent disconnected sessions when logged into a Windows 2008 R2 Remote Desktop Services (RDS) server.
    As I mentioned, the disconnect is intermittent in nature and almost appears to be network related, although I cannot find any data in the Application, System, or application specific logs to support that.
    The RDS server overall does not exhibit any error, but the user's session is briefly interrupted and then restored.  I would like to be able to gain some additional information about what is going on under the hood, but I am having trouble finding any
    details on how to turn on debug logging for Terminal Services (er, RDS) on 2008 R2.
    Can someone provide some additional details on what kind of logging or other means that I can take on this server in order to gain some additional insight?
    Thanks in advance for any advice.

    Hi,
    There are certain reason for which the client get disconnect from the server. The following are some of the commonly seen symptoms:
    • You may be limited in the number of users who can connect simultaneously to a Remote Desktop session or Remote Desktop Services session.
    • You may have a port assignment conflict.
    • You may have an incorrectly-configured Authentication and Encryption setting.
    • You may have a certificate corruption.
    More information.
    http://support.microsoft.com/kb/2477176
    If you want to have log for login\logoff for the client on server end then you can get the information from below log.
    Event Viewer>Application and Service Logs>Microsoft>Windows>TerminalServices-LocalSessionManager>Operational
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Purchasing License for Taking more than 2 remote desktop

    Could you please tell me procedure i.e. which license we have to purchase, so that more than 2 users can take remote desktop of (Server 2008 R2, Server 2012 R2) at a time.
    We are planning to purchase the license but no idea of what needs to be purchased.
    Thanks,
    Babasaheb

    Hi,
    Thank you for posting in Windows Server Forum.
    To access more than 2 concurrent users you need to purchase RDS CAL. There are 2 types of RDS CAL available.
    Per Device and Per User. When you purchase Per Device it will be allocated to that device and any user can access from that device. For Per User CAL, it will be allocated to particular users and that user can use any device for remote connection.
    So it depends on your environment requirement that which CAL do you prefer to buy. But please see that before you install the CAL, you must have RDS License server install and also activated; then only you can configure the RDS CAL.
    To purchase RDS CAL, you can purchase latest version of RDS CAL (Server 2012 R2) so that it can handle the server 2008 R2 server also.
    More information.
    Remote Desktop Services Client Access Licenses (RDS CALs)
    http://technet.microsoft.com/en-in/library/cc753650.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Mac and Microsoft Remote Desktop

    If I download Microsoft Remote Desktop can I download programs that run on windows operating system?

    Hi,
    From your description it seems that you want to download the software from remote server on MAC device when you perform remote desktop from MAC. If I misunderstand then please clarify your points.
    You can download MRD MAC from below link.
    https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Since upgrading to OS 10.8.5 login keychain corrupted keeps asking for password for OSX, mail and Safari. Solutions?

    Ever since upgrading to OS 10.8.5 login keychain corrupted; keeps asking for pasword tor OSX, mail and Safari. Help!

    Have you tried opening Keychain Access and running Keychain First Aid (under the Keychain Access menu) on the login keychain?

  • IPhone and Windows Remote Desktop Connection

    Will iPhone run MS Remote Desktop Connection so I can get email from work?

    I TRIED THE RDMPLUS PROGRAM - COULD NOT GET IT TO WORK - COULD NOT GET RESPONSE FROM COMPANY. HOWEVER, I HAVE HAD GREAT SUCCESS THIS WEEKEND WITH A PROGRAM CALLED "FILE 2 PHONES". YOU CAN GO TO www.f2p.com AND CHECK THEM OUT. THEY HAVE TERRIFIC SUPPORT AVAILABLE (I ACTUALLY TALKED WITH A VERY KNOWLEGEABLE "LIVE PERSON" ON THE WEEKEND IF YOU CAN BELIEVE IT). CALL AND ASK YOU QUESTIONS ABOUT SECURITY.

  • Why I cannot type Thai? (MS Remote Desktop PC ios app)

    After I updated app , I found that I cannot type Thai. It's show only "?" every letters that I type. Before update I can use it very well. (I use ios system in Thai and English already (also ios7 and ios8).

    Hi,
    Thank you for posting in Windows Server Forum.
    Please update with newly released version, MRD 8.1.4 IOS and then verify the result.
    https://itunes.apple.com/in/app/microsoft-remote-desktop/id714464092?mt=8
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • HT4993 Would it be possible to create a separate itunes account for my iphone and ipod on the same computer?

    im trying to set up my iphone and dont want stuff from my ipod..... is iy possible to make another itunes account just for my iphone and keep it on the same computer? please help thanks

    You can use one iTunes account as it sees each device separetly. I have my iPod, iPad, and iPhone all on one iTunes account without any problems.

  • Can I use the same itunes for my ipad and iphone?  Will the computer erase my other device information?

    Can I use the same itunes for my ipad and iphone on my computer?  Will the computer erase my other device information?

    The computer will not erase the information.  Each device will show up in iTunes as a separate device and you can control the information for each device through iTunes.

  • TS1702 Trouble with updating my apps. It says it is updating, but has been saying that for three days and I can't use the app. What do I do to cancel or update?

    Trouble updating apps already downloaded. It says it is updating, but I cannot use the app , and it has said that for three days. Also have tried downloading new apps. They appear on the iPad, but they are dark and saying downloading. How do I cancel or get them to go thru?

    Use iTune (computer) to update the apps. When completed, sync to iPad.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%204/94f1fe0cf3c66737ba5 7a4e6b92df1a6.jpg

Maybe you are looking for

  • How to valiadate on the basis of employee id selected...

    Hi All, My requirement is to use the validation on the basis of the employee id selected. My CO if (pageContext.getParameter("submitButton")!=null) OAViewObject vo = (OAViewObject)am.findViewObject("EmployeeEOVO1"); if (vo != null) System.out.println

  • Can't import songs into itunes playlist folders from itunes music folder

    Ive got to be an idiot. ive had my ipod for years and ive yet to figure this out: how do i put music into my playlist folders? The only playlists ive been able to successfully create and use are the ones ON my ipod. but that requires me to plug in my

  • Images in Tilelist not actual size

    I am pulling urls from my database and having them and a small caption populate a tilelist. The images vary in size and I am wanting them to show up their actual size and will have 1 row in the TileList and just scroll horizontally to view the images

  • [GeForceFX] My monitor is blank

    When i played some games ( Need For Speed Underground 2 or Swat4 ) with a some time, my video cards apears had some problem, because my monitor goes to blank, and the monitor light is turn off and on, i don t know how to solve!I try to install other

  • Need Information about Encoding ?

    In file transfer , open data set syntax -- Default encoding is there , what is the significance of that encoding? Thanks Janardhan