CIE chromacity graph in labview

Has anyone ever implemented CIE chromacity graph in labview.
Please let me know how to approach this problem.

Muks
Sorry, I should have been more clear. I can get the required x, y values.
Its plottig these values on a real CIE graph. The discussion you , I have
taken a look that long ago. It discusses how get CIE values, which is
not a problem. Also I am attaching a screenshot of a software which uses
a simple x,y plot, with a reference point, at 0.313 and 0.329 and takes
realtime RGB values values and plots them as a point. Is it posible to do
somehting like this in labview. Either of them is good enough for me.
Checkout the snapshot.
Attachments:
xyplot.JPG ‏7 KB

Similar Messages

Facing memory error during shifting from 3d stem graph to 3d surface graph in labview 2010

hello all,
earlier I was using 3D Stem graph in labview 2010. Now we want to move to Surface plot for same data.when i am trying surface graph it shows memory error.
I have 10240 data.
I was using vector method in stem graph so now for Surface graph i have thought that i have to make matrics of 10240x10240 and its diagonal elements should be my Z co0ordiants.
plz help me out here.
thanks & regards,

hello mikeporter,
thanks for reply.I am attaching my Vi. It has some error also.plz look into it.
X and Y are my co-ordinates pairs.I will be having values for these and have to update for same.
Attachments:
Untitled 2_surface.vi ‏184 KB

How to print a 3D Graph with Labview 5.1?

I would like know if i can print a 3D Graph with Labview 5.1.

From NI knowledgebase: "LabVIEW 5.1 includes a 3D Graph control in the Full and Professional Development Systems. Visit the LabVIEW Product page for more information on ordering or upgrading to LabVIEW 5.1. The LabVIEW 5.1 Base package includes a demo version of the 3D Graph control."
Hope this helps

How to Send Multiple Plot XY Graph from LabVIEW to Microsoft Excel

The link below describes exactly what I would like to do, however the link to the solution/work around does not work.
Has anyone got an alternative solution?
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E

Please check the link again as it seems to be working fine now.
How to Send Multiple Plot XY Graphs from LabVIEW to Microsoft Excel:
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E
The standard Excel Insert Graph.vi cannot insert multiple XY Graphs to Microsoft Excel, so you will need to use the Report Generation Toolkit for Microsoft Office. You will find a link to an example program at the bottom of the page. I have also attached it below.
Attachments:
example.zip ‏35 KB

Calculer l'aire d'un graph sous Labview

Bonjour,
Je voudrais calculer l'aire d'une zone d'intérêt délimitée sur un graph sous labview. Je m'explique :
Supposons que j'ai fait l'acquisition des données sur un graph. Je voudrais en fait, exploiter ces données, en délimitant plusieurs zones dans ce graph afin d'en calculer l'aire. Auriez-vous la gentillesse de m'orienter vers une solution qui pourra m'épargner un calcul manuel.
Merci par avance

Réponses données sur forum dupliqué à l'adresse suivante:
http://forums.ni.com/t5/Discussions-de-produit-de-NI/Calculer-l-aire-d-un-graph-sous-Labview/td-p/15...
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

How do set up multiple devices with multiple graphs in labview

Hello,
I am new at LabView, and we are trying to setup a test rig to measure voltage, pressure and flow rates. We are currently using a NI-6009USB box and Labview version 8.2. Our problem lies in setting up the actual measurements on separate graphs. How do i go about setting up the daq-assistant to measure mulitple devices, and graph them on their own graphs? We also need to know how to program in when measuring flow, how to convert it from square wave form to a calibrated curve?
Any help would be greatly appreciated!
Nate

When you configure the DAQ Assistant, you will be first asked to select the measurement type. Assuming that you have voltage sensors because you have the 6009, you select Analog Input>Voltage. You then get a list of devices. Since you only have one, it should be listed as Dev1. Expand that and then pick the channels you have connected to the sensors. Just like it says at the bottom of the of the channel window, you can select multiple channels with <CTL> or <SHIFT> click. After you've done that, the next window is where you select your sample rate, number of samples, etc. You can also select a custom scale for each channel. This is where you would enter any formula you have from the sensor vendor in order to convert a voltage reading to scaled units.
The output of the DAQ Assistant is a dynamic data type. You can wire this to a single graph to display all readings together or use the Split Signals function to break out individual channels for separate graphs.
Message Edited by Dennis Knutson on 02-22-2007 03:33 PM
Attachments:
Split Signals.PNG ‏4 KB

3D graphs cause LabVIEW 2010 to hang

I've been using LabVIEW 2010 for several weeks without any problems, but today I noticed that it doesn't work at all with anything related to the 3D picture control. Today was the first time that I tried doing anything with the 3D picture tool since installing LV 2010. Dropping any of the 3D Graphs on the front panel of a new VI causes LV2010 to hang. (By hang, I mean the VI window remains open but most UI things no longer work. Right-clicking on the window does not show a context menu. The main menu doesn't work. The X button does not close the VI front panel window nor the diagram window. Control-Q does not cause LabVIEW to quit. I have to kill the process in Task Manager.) It is the same story with just a plaing 3D picture indicator. Also, the solarsystem.vi example does not work either. The problems start as soon as I open the solarsystem.vi. After killing LV with Task Manager and relaunching LV10, I do not get the LV message about a previous crash.
The problem I am talking about is for LabVIEW 2010 with the f2 patch running in Win7. I am actually running it using VMware Fusion 3.1.3 on a 2009 Mac Pro running Lion. The Mac drivers are all updated. Since it is VMware Fusion machine, the video driver on the Windows side is part of the VMware Tools installation, which is up to date.
After searching the forums, I've tried all the other potential solutions I could find: 1) repaired LV2010 using add/remove programs and 2) tried using the compatibilty mode settings to turn off Aero.
Interestingly, 3D graphs work fine on the Mac side for LV2010 for Mac.
Even more insterestingly, 3D graphs work fine on Win7 for LV 8.5, which I still have installed. The fact that it works fine for LV 8.5 would seem to indicate that Lion did not introduce the problem and that the video driver is working fine.
Solved!
Go to Solution.

Yep, it's the same virtual machine. I set it up almost 2 years ago and it has been extremely stable. Both LabVIEW 8.5 and 2010 have been perfectly happy on it. It's a great way to do LabVIEW on Win7. I didn't notice any changes at all to the VM when I upgraded from Snow Leopard to Lion. I installed LabVIEW 2010 before upgrading to Lion, but I didn't have occasion to work with 3D controls before the upgrade to Lion so I don't know if it would have worked on Snow Leopard. The Mac versions of both LabVIEW 8.5 and LabVIEW 2010 also work great on the both Snow Leopard and Lion.
I happen to have an XP virtual machine too, but I haven't installed LabVIEW there. Let me know if that would be a worthwhile test.
You might check with Marc Page--unless he has already upgraded again I think he has a similar machine to mine.
The video card is the original stock:
NVIDIA GeForce GT 120:
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0640
Revision ID: 0x00a1
ROM Revision: 3386
Displays:
Cinema HD Display:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display Connected

Why the graph in Labview does not plot when there is a different set of data collected

Hi everyone,
I need help from you guys as I faced a problem with my Labview program. Actually, what I am trying to do with the labview program is that I will be collecting data of different days and use them to plot graphs according to the date that i have set in my program. However, my graph fails to plot whenever there is a change in date, it remains at the first graph that is being plot at the start of the program. I have tried to look through the whole process and found out that actually the execution of my graph in the program is not completed which might cause this program. Therefore, I hope that you guys can help by taking looking through my program which has been attached and tell me the solutions if any! I really appreciate your help! It is a winrar file, extract them and open the AMK_solar monitoring system(stack).vi
Regards,
Kok Wan
Attachments:
Ftp version SMS.zip ‏1722 KB

Hi Kok,
"no formatting needed"
Why do you feed "2358" to FormatDateTimeString? The result will be "2358" - so no formatting function needed...
"other timestamp functions"
Found deep in your subVIs. You can work on timestamps as numbers, no conversion to/from string needed...
This contains 3 unneccessary locals and a race condition resulting from overuse of locals...
"The problem is I cant still get my graph plotting"
Which graph? There are a lot of it...
Don't you read new data (correctly)? Is the data arriving in the correct wires?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Again mixed signal graph and Labview 2012

I have just experienced a weird change in labview 2012 on the mixed signal graphs. In a preliminary analysis, it seems that the most critical behavior is related to the silver mixed signal graph, although i didn't have the time to test the standard one.
Straight to the point... the property "plot area size" not only resizes the plot area, but also the graph; this is in contrast with what happened previously in LV2011. If the graph belongs to a subpane and if the property "fit control to pane" is enabled, the area resize prevents the graph from correctly fitting the pane.
Any suggestion?
cheers
m.
Attachments:
MixedSignalDisaster.vi ‏13 KB

I think that since this behavior is a regression (working properly until LabVIEW 2011 SP1) this should be fixed as soon as possible through a specific fix, without waiting for the next Service Pack.
This regression has been blocking the development of our application.
Could someone from the NI support give an answer, please?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Non monotonous graph scale /labview

Hy,
Is it possible to plot a graph with a scale which is not monotonous ?
For example, my X scale should goes from 10 to 60 and come back to 10 (from the left to the right).
Indeed, the values of Y are different with the same X if it is on the way going or the way back.
Thank you.
Antoine Dussaux
Thales-Cnrs Palaiseau.

Hello,
What you wanna do, isn't a simple XY graph. where you give the x and y?
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL

Troubles using graphs in labview 6i

Hello,
I am using labview 6i and I have troubles with graphs.
This is very simple.
I create a new VI, then right clic with the mouse to open the command palette, select a graph, and then try to put it on the front window. Immediatly, an error windows opens and says something like (it's written in french): "error:image.cpp,line 4149. etc..."
Is it a known bug and is there a soft to update and solve this trouble?
Thank you
Daniel

> I am using labview 6i and I have troubles with graphs.
> This is very simple.
> I create a new VI, then right clic with the mouse to open the command
> palette, select a graph, and then try to put it on the front window.
> Immediatly, an error windows opens and says something like (it's
> written in french): "error:image.cpp,line 4149. etc..."
> Is it a known bug and is there a soft to update and solve this
> trouble?
The problem is an incompatibility between LV and the video driver. The
correct fix is probably to download the latest video driver from the
manufacturers web site. Another thing to do is to open the video driver
configuration and often there is a setting for acceleration. Turning
the acceleration down will sometimes make the problem go a
way. Other
things to try is to try other video depths and possibly different
monitor sizes.
Greg McKaskle

Plotting graph in LabVIEW from MySQL data table

Is there any possibility to plot the data from MySQL data table in LabVIEW graph/chart??
can somebody help me??
thanks...

I am new with LabVIEW and I am also with the same problem.
No problems to write data into MySQL, but when trying to read data neither "fetch element data" or "get properties" answer !
It is not possible to get a simple recordcount using the "get properties". The same script give the right answers with MS Access, only changing the DB reference from "connection string" to a "UDL". Does somebody can post an example retriving data (that runs ok even with a WHERE clause in the recordset) using MySQL ?
The connection string I am using is:
Driver={MySQL ODBC 5.1 Driver};Server=127.0.0.1;Database=DBname;User=root;Password=xxx;Option=785;
Attachments:
MySQL_Access_diff.JPG ‏88 KB

Reset button for My graph in labview

I have a program with a xy graph showing sequences for the motor movements.i need a reset button on my front panel to reset my graph sequences because i have got two kinds of sequences snake and hopper. i need it to be clear so that i could start a new sequence and to be able to visualize them separately.

What does your existing code look like?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to copy the XY graph on labview front panel and insert into Excel using labview

Hi all,
The XY graph display on LV front panel after test. How can I copy this XY graph and insert into excel file?
Thank you very much for your help.
Khanh

KPRO wrote:
Hi,
I refer to insert it into excel since report is in excel format, but if it's too hard to do so I can save it in another format.
Either way, will labview support this? Anyway, thank you very much for your quick reply.
Khanh
You are already using the Report Generation Toolkit? There is the "Append Control Image to Report.vi" that would make this easy.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Troncature d'un graphe sur labview

Bonjour,
Je voudrais réaliser une troncature d'un graphe obtenu à partir d'une acquisition. Càd une fois j'ai le graphe entre les mains, je ne garde que la partie qui m'intéresse (une sorte de fenêtrage mais la notion de fréquence n'intervient pas ici).
Merci de m'aider
PS: J'ai labview 8.5

Bonjour,
la notion de graphe est une notion d'affichage. Les données qui viennent de votre acquisition sont un tableau (prennant différentes formes selon ce qu'il transporte).
Tronquer votre graphe revient à sélectionner les valeurs qui vous intéressent dans le tableau, et les afficher dans votre graphe.
Un bon vi vallant mieux qu'un long discours, postez votre vi (le plus léger possible) qui montre votre problème...
Cordialement,
V-F

CIE chromacity graph in labview

Similar Messages

Maybe you are looking for