CIF activate with out transferring

Hi ,
We have 50000 materials CIF ed successfully in one integration model.But accidentally we deactivated that version to inactive . Because of that we are unable to use change pointers to those 50000 Materials.
Now how do i activate that version to active with out having to re transfer all the materials again.
Thanks,
Srini

Hi Srini,
See SAP Note 740865.
Best Regards,
Mike

Similar Messages

Mod: m7 j020dx-TouchSreen is acting strange and activates with out me touching it

HP LapTop Model: m7 j020dx
Running Win 8.1
This is the very first computer that I have owned that has "touch screen" capability so not quite sure what may be causing this; a hardware setting, needed software update or a virus.
Over the past week I have noticed something very odd happening with this laptop screen. At first did not give it much thought because i had thought that maybe i may have done something to cause this but realized now it does it on its very own.
I could be doing absolutely nothing on the computer and all of a sudden the cursor moves to a new point on the screen. Like i said at first was not quite sure what the heck was going on. Did not give it much thought at first but have noticed this is happening more and more now. So I started paying far more attention to his and have seen that while looking at my screen I see that a "blotch" would appear (as if i had touched the screen with my finger causing the impression on the screen) out of no where and the cursor would then fly across the screen to the point of the blotch. I would move the cursor to a new point on the screen and after a while (could be one second or one minute) the blotch reappears as if i actually applied pressure to the screen with my finger) the blotch would reappaer and the cursor flies to that part of the screen again. Sometimes it gets so bad where the moment i move the cursor it flies right back to that same spot over and over even to the point where if i attempt to restart the computer i can't even select the menu steps to restart because the cursor keeps flying across the screen as if it had a mid of its own.
I first started to shut off the computer by shutting it down by using the "power button" which i know is not the right way to do it but at these times the only way i can shut it down or restart it because the cursor makes it impossible to even use the windows key to restart it.
Yesterday i had to restart the system at least 4 different times to get it to stop.
Is anyone else experiencing this problem. Is it a virus or does this tend to happen with a touchscreen computer.
Any information will be appreciated.
Thanks

Hello @hplap2014,
I have read your post on how the TouchScreen on your notebook computer is functioning in a strange manner, and I would be happy to be of assistance!
To further diagnose the issue with the TouchScreen, I suggest following the steps in this document on Troubleshooting Touch Screen Issues in Windows 8. This should help return the functionality of your computer's TouchScreen abilities.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I need help! how can i use my phone with out sim

how could I manage the fact my iPhone 5s wont activate with out sim card? I just want to use it as a ipod!

You can use old iPhone as iPod, but first you need SIM card to activate it.
Insert a SIM card into the phone and connect it your computer with iTunes open and follow the activation assistant to activate the iPhone. Once the iPhone have been activated, remove the SIM card.
Know more at:
Using an iPhone without a wireless service plan - Apple Support
<Edited by Host>

HT1349 i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

i had 4 point something i dont know lol but i used to text anyways with my wifi on "textfree app" until i updated like a dummy i didnt know they would ask for the sim card and my day got ruined . all i wanted to know is if i put a sim card like if i buy a at&t card for 4$ on amazon if it would unlock it and i can use it again for i can play angry birds -_- but u kinda made my day better thanks

HT3939 how can i know the ios version with out activate the divice?

hi, my iphone 4 was locked with ktf korea, and i made the payment for unlocking the phone through internet one month ago,
but i am not able to do the second step which provided by the unlocking site, i don't know which ios is running in it ,
can i get it with out activate the phone....

Are you able to access the home screen? With the app that looks like a cog, it's the settings app, then you scroll a little way down to General, then the first thing you should see is "About", hit that, scroll down until you see "Version", that is your iOS that your phone is currently running. OR go to Settings > General > Software Update> and it'll tell you there too. OR try plugging your phone into your computer via 30 pin/usb cord. I'm assuming you already have an iTunes account with a current iTunes I.D. and passcode, once you plug it in and iTunes recognizes the device, in the top right it will say "iPhone" and this little bar that says that will have a spinning icon while it is synced to iTunes, click it and in the banner at the top of iTunes will say what version of iTunes the iPhone 4 has.

Is their a way to activate the "find my iphone" app with out having the iphone with you

is their a way to activate the "find my iphone" app with out having the iphone with you

how do i activate the lost mode on my "find my iphone" app without reporting it lost? What do i have to do to activate this app prior to any loss? [email protected] Thanks, JN

Bdc program with out coding

Hi All,
I want to know how to write a bdc program with out coding...
Thank you,
Gopi....

Hai.
check this.
BATCH DATA COMMUNICATION
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
The first is when application data to be replaced is transferred at once, and only once.
The second situation is to transfer data periodically from external systems to SAP and vice versa.
There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called batch input or batch data communication.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
Advantages offered by BATCH INPUT method:
1. Can process large data volumes in batch.
2. Can be planned and submitted in the background.
3. No manual interaction is required when data is transferred.
4. Data integrity is maintained as whatever data is transferred to the table is through transaction. Hence batch input data is submitted to all the checks and validations.
To implement one of the supported data transfers, you must often write the program that exports the data from your non-SAP system. This program, known as a data transfer program must map the data from the external system into the data structure required by the SAP batch input program.
The batch input program must build all of the input to execute the SAP transaction.
Two main steps are required:
To build an internal table containing every screen and every field to be filled in during the execution of an SAP transaction.
To pass the table to SAP for processing.
Prerequisite for Data Transfer Program
Writing a Data Transfer Program involves following prerequisites:
Analyzing data from local file
Analyzing transaction
Analyzing transaction involves following steps:
The transaction code, if you do not already know it.
Which fields require input i.e., mandatory.
Which fields can you allow to default to standard values.
The names, types, and lengths of the fields that are used by a transaction.
Screen number and Name of module pool program behind a particular transaction.
To analyze a transaction::
Start the transaction by menu or by entering the transaction code in the command box.
(You can determine the transaction name by choosing System Status.)
Step through the transaction, entering the data will be required for processing your batch input data.
On each screen, note the program name and screen (dynpro) number.
(dynpro = dyn + pro. Dyn = screen, pro = number)
Display these by choosing System Status. The relevant fields are Program (dynpro) and Dynpro number. If pop-up windows occur during execution, you can get the program name and screen number by pressing F1 on any field or button on the screen.
The technical info pop-up shows not only the field information but also the program and screen.
For each field, check box, and radio button on each screen, press F1 (help) and then choose Technical Info.
Note the following information:
- The field name for batch input, which youll find in its own box.
- The length and data type of the field. You can display this information by double clicking on the Data Element field.
Find out the identification code for each function (button or menu) that you must execute to process the batch-input data (or to go to new screen).
Place the cursor on the button or menu entry while holding down the left mouse button. Then press F1.
In the pop-up window that follows, choose Technical info and note the code that is shown in the Function field.
You can also run any function that is assigned to a function key by way of the function key number. To display the list of available function keys, click on the right mouse button. Note the key number that is assigned to the functions you want to run.
Once you have program name, screen number, field name (screen field name), you can start writing.
DATA TRANSFER program.
Declaring internal table
First Integral Table similar to structure like local file.
Declaring internal table like BDCDATA
The data from internal table is not transferred directly to database table, it has to go through transaction. You need to pass data to particular screen and to particular screen-field. Data is passed to transaction in particular format, hence there is a need for batch input structure.
The batch input structure stores the data that is to be entered into SAP system and the actions that are necessary to process the data. The batch input structure is used by all of the batch input methods. You can use the same structure for all types of batch input, regardless of whether you are creating a session in the batch input queue or using CALL TRANSACTION.
This structure is BDCDATA, which can contain the batch input data for only a single run of a transaction. The typical processing loop in a program is as follows:
Create a BDCDATA structure
Write the structure out to a session or process it with CALL TRANSACTION USING; and then
Create a BDCDATA structure for the next transaction that is to be processed.
Within a BDCDATA structure, organize the data of screens in a transaction. Each screen that is processed in the course of a transaction must be identified with a BDCDATA record. This record uses the Program, Dynpro, and Dynbegin fields of the structure.
The screen identifier record is followed by a separate BDCDATA record for each value, to be entered into a field. These records use the FNAM and FVAL fields of the BDCDATA structure. Values to be entered in a field can be any of the following:
Data that is entered into screen fields.
Function codes that are entered into the command field. Such function codes execute functions in a transaction, such as Save or Enter.
The BDCDATA structure contains the following fields:
PROGRAM: Name of module pool program associated with the screen. Set this field only for the first record for the screen.
DYNPRO: Screen Number. Set this field only in the first record for the screen.
DYNBEGIN: Indicates the first record for the screen. Set this field to X, only for the first record for the screen. (Reset to (blank) for all other records.)
FNAM: Field Name. The FNAM field is not case-sensitive.
FVAL: Value for the field named in FNAM. The FVAL field is case-sensitive. Values assigned to this field are always padded on the right, if they are less than 132 characters. Values must be in character format.
Transferring data from local file to internal table
Data is uploaded to internal table by UPLOAD of WS_UPLOAD function.
Population of BDCDATA
For each record of internal table, you need to populate Internal table, which is similar to BDCDATA structure.
All these five initial steps are necessary for any type of BDC interface.
DATA TRANSFER program can call SESSION METHOD or CALL TRANSACTION. The initial steps for both the methods are same.
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
SESSION METHOD
About Session method
In this method you transfer data from internal table to database table through sessions.
In this method, an ABAP/4 program reads the external data that is to be entered in the SAP System and stores the data in session. A session stores the actions that are required to enter your data using normal SAP transaction i.e., Data is transferred to session which in turn transfers data to database table.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. You can either explicitly start and monitor a session or have the session run in the background processing system.
Unless session is processed, the data is not transferred to database table.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
Parameters to this function are:
User Name: User name
Group: Name of the session
Lock Date: The date on which you want to process the session.
Keep: This parameter is passed as X when you want to retain session after
processing it or to delete it after processing.
BDC_INSERT
This function creates the session & data is transferred to Session.
Parameters to this function are:
Tcode: Transaction Name
Dynprotab: BDC Data
BDC_CLOSE_GROUP
This function closes the BDC Group. No Parameters.
Some additional information for session processing
When the session is generated using the KEEP option within the BDC_OPEN_GROUP, the system always keeps the sessions in the queue, whether it has been processed successfully or not.
However, if the session is processed, you have to delete it manually. When session processing is completed successfully while KEEP option was not set, it will be removed automatically from the session queue. Log is not removed for that session.
If the batch-input session is terminated with errors, then it appears in the list of INCORRECT session and it can be processed again. To correct incorrect session, you can analyze the session. The Analysis function allows to determine which screen and value has produced the error. If you find small errors in data, you can correct them interactively, otherwise you need to modify batch input program, which has generated the session or many times even the data file.
CALL TRANSACTION
About CALL TRANSACTION
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program by
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>
Messages into <MSGTAB>.
Parameter 1 is transaction code.
Parameter 2 is name of BDCTAB table.
Parameter 3 here you are specifying mode in which you execute transaction
A is all screen mode. All the screen of transaction are displayed.
N is no screen mode. No screen is displayed when you execute the transaction.
E is error screen. Only those screens are displayed wherein you have error record.
Parameter 4 here you are specifying update type by which database table is updated.
S is for Synchronous update in which if you change data of one table then all the related Tables gets updated. And sy-subrc is returned i.e., sy-subrc is returned for once and all.
A is for Asynchronous update. When you change data of one table, the sy-subrc is returned. And then updating of other affected tables takes place. So if system fails to update other tables, still sy-subrc returned is 0 (i.e., when first table gets updated).
Parameter 5 when you update database table, operation is either successful or unsuccessful or operation is successful with some warning. These messages are stored in internal table, which you specify along with MESSAGE statement. This internal table should be declared like BDCMSGCOLL, a structure available in ABAP/4. It contains the following fields:
1. Tcode: Transaction code
2. Dyname: Batch point module name
3. Dynumb: Batch input Dyn number
4. Msgtyp: Batch input message type (A/E/W/I/S)
5. Msgspra: Batch input Lang, id of message
6. Msgid: Message id
7. MsgvN: Message variables (N = 1 - 4)
For each entry, which is updated in database, table message is available in BDCMSGCOLL. As BDCMSGCOLL is structure, you need to declare a internal table which can contain multiple records (unlike structure).
Steps for CALL TRANSACTION method
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. UPLOAD or WS_UPLOAD function to upload the data from local file to itab. (Considering file is local file)
4. Loop at itab.
Populate BDCTAB table.
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>.
Refresh BDCTAB.
Endloop.
(To populate BDCTAB, You need to transfer each and every field)
The major differences between Session method and Call transaction are as follows:
SESSION METHOD CALL TRANSACTION
1. Data is not updated in database table unless Session is processed. Immediate updation in database table.
2. No sy-subrc is returned. Sy-subrc is returned.
3. Error log is created for error records. Errors need to be handled explicitly
4. Updation in database table is always synchronous Updation in database table can be synchronous Or Asynchronous.
Error Handling in CALL TRANSACTION
When Session Method updates the records in database table, error records are stored in the log file. In Call transaction there is no such log file available and error record is lost unless handled. Usually you need to give report of all the error records i.e., records which are not inserted or updated in the database table. This can be done by the following method:
Steps for the error handling in CALL TRANSACTION
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. Internal table BDCMSG like BDCMSGCOLL
4. Internal table similar to Ist internal table
(Third and fourth steps are for error handling)
5. UPLOAD or WS_UPLOAD function to upload the data from the local file to itab. (Considering file is local file)
6. Loop at itab.
Populate BDCTAB table.
Call transaction <tr.code> using <Bdctab>
Mode <A/N/E>
Update <S/A>
Messages <BDCMSG>.
Perform check.
Refresh BDCTAB.
Endloop.
7 Form check.
IF sy-subrc <> 0. (Call transaction returns the sy-subrc if updating is not successful).
Call function Format_message.
(This function is called to store the message given by system and to display it along with record)
Append itab2.
Display the record and message.
DIRECT INPUT
About Direct Input
In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not simulate the online transaction. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. Direct input checks the data thoroughly and then updates the database directly.
You can start a Direct Input program in two ways;
Start the program directly
This is the quickest way to see if the program works with your flat file. This option is possible with all direct input programs. If the program ends abnormally, you will not have any logs telling you what has or has not been posted. To minimize the chance of this happening, always use the check file option for the first run with your flat file. This allows you to detect format errors before transfer.
Starting the program via the DI administration transaction
This transaction restarts the processing, if the data transfer program aborts. Since DI document are immediately posted into the SAP D/B, the restart option prevents the duplicate document posting that occurs during a program restart (i.e., without adjusting your flat file).
Direct input is usually done for standard data like material master, FI accounting document, SD sales order and Classification for which SAP has provided standard programs.
First time you work with the Direct Input administration program, you will need to do some preparation before you can transfer data:
- Create variant
- Define job
- Start job
- Restart job
Common batch input errors
- The batch input BDCDATA structure tries to assign values to fields which do not exist in the current transaction screen.
- The screen in the BDCDATA structure does not match the right sequence, or an intermediate screen is missing.
- On exceptional occasions, the logic flow of batch input session does not exactly match that of manual online processing. Testing the sessions online can discover by this.
- The BDCDATA structure contains fields, which are longer than the actual definition.
- Authorization problems.
RECORDING A BATCH INPUT
A B recording allows you to record a R/3 transaction and generate a program that contains all screens and field information in the required BDC-DATA format.
You can either use SHDB transaction for recording or
SYSTEM ? SERVICES ? BATCH INPUT ? EDIT
And from here click recording.
Enter name for the recording.
(Dates are optional)
Click recording.
Enter transaction code.
Enter.
Click Save button.
You finally come to a screen where, you have all the information for each screen including BDC_OKCODE.
Click Get Transaction.
Return to BI.
Click overview.
Position the cursor on the just recorded entry and click generate program.
Enter program name.
Click enter
The program is generated for the particular transaction.
BACKGROUND PROCESSING
Need for Background processing
When a large volume of data is involved, usually all batch inputs are done in background.
The R/3 system includes functions that allow users to work non-interactively or offline. The background processing systems handle these functions.
Non-interactively means that instead of executing the ABAP/4 programs and waiting for an answer, user can submit those programs for execution at a more convenient planned time.
There are several reasons to submit programs for background execution.
The maximum time allowed for online execution should not exceed 300 seconds. User gets TIMEOUT error and an aborted transaction, if time for execution exceeds 300 seconds. To avoid these types of error, you can submit jobs for background processing.
You can use the system while your program is executing.
This does not mean that interactive or online work is not useful. Both type of processing have their own purposes. Online work is the most common one entering business data, displaying information, printing small reports, managing the system and so on. Background jobs are mainly used for the following tasks; to process large amount of data, to execute periodic jobs without human intervention, to run program at a more convenient, planned time other than during normal working hours i.e., Nights or weekends.
The transaction for background processing is SM36.
Or
Tools ? Administration ? Jobs ? Define jobs
Or
System ? services ? Jobs
Components of the background jobs
A job in Background processing is a series of steps that can be scheduled and step is a program for background processing.
Job name. Define the name of assigned to the job. It identifies the job. You can specify up to 32 characters for the name.
Job class. Indicates the type of background processing priority assigned to the job.
The job class determines the priority of a job. The background system admits three types of job classes: A B & C, which correspond to job priority.
Job steps. Parameters to be passed for this screen are as follows:
Program name.
Variant if it is report program
Start criteria for the job: Option available for this are as follows:
Immediate - allows you to start a job immediately.
Date/Time - allows you to start a job at a specific name.
After job - you can start a job after a particular job.
After event - allows you to start a job after a particular event.
At operation mode - allows you to start a job when the system switches to a particular operation mode.
Defining Background jobs
It is two step process: Firstly, you define the job and then release it.
When users define a job and save it, they are actually scheduling the report i.e., specifying the job components, the steps, the start time.
When users schedule program for background processing, they are instructing the system to execute an ABAP/4 report or an external program in the background. Scheduled jobs are not executed until they are released. When jobs are released, they are sent for execution to the background processing system at the specified start time. Both scheduling and releasing of jobs require authorizations.
HANDLING OF POP UP SCREEN IN BDC
Many times in transaction pop up screen appears and for this screen you dont pass any record but some indication to system telling it to proceed further. For example: The following screen
To handle such screen, system has provided a variable called BDC_CURSOR. You pass this variable to BDCDATA and process the screen.
Usually such screen appears in many transactions, in this case you are just passing information, that YES you want to save the information, that means YES should be clicked. So you are transferring this information to BDCDATA i.e., field name of YES which is usually SPOT_OPTION. Instead of BDC_OKCODE, you are passing BDC_CURSOR.
BDC_CURSOR is also used to place cursor on particular field.
AN EXAMPLE WITH SESSION METHOD
Following program demonstrates how data is passed from flat file to SAP transaction and further to database table by using SESSION method.
The transaction is TFBA (to change customer).
A simple transaction where you are entering customer number on first screen and on next screen data is displayed for the particular customer number. Field, which we are changing here, are name and city. When you click on save, the changed record gets saved.
Prerequisite to write this BDC interface as indicated earlier is:
1. To find screen number
2. To find screen field names, type of the field and length of the field.
3. To find BDC_OKCODE for each screen
4. Create flat file.
Flat file can be created in your hard disk as follows:
1 Vinod Hyderabad
2 Kavitha Secunderabad
3 Kishore Hyderabad
(Where 1st character field is Customer number, 2nd field is Customer name and 3rd field is City.)
To transfer this data to database table SCUSTOM following interface can be used.
REPORT DEMO1.
Following internal table is to upload flat file.
DATA: BEGIN OF ITAB OCCURS 0,
ID(10),
NAME(25),
CITY(25),
END OF ITAB.
*Following internal table BDCDATA is to pass date from internal table to session.
DATA: BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
Variables
DATA: DATE1 LIKE SY-DATUM. DATE1 = SY-DATUM - 1. This is for Hold Date
To upload flat file to internal table.
CALL FUNCTION UPLOAD
EXPORTING
FILE NAME = C:\FF.TXT
FILE TYPE = ASC
TABLES
DATA_TAB = ITAB
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
OTHERS = 6.
If sy-subrc = 0.
Calling Function to Create a Session
CALL FUNCTION BDC_OPEN_GROUP
EXPORTING
CLIENT = SY-MANDT
GROUP = POTHURI
HOLDDATE = DATE1
KEEP = X
USER = SY-UNAME
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
If sy-subrc = 0.
*-- MAIN Logic--
LOOP AT ITAB
PERFORM GENERATE_DATA. Populating BDCDATA Table
CALL FUNCTION BDC_INSERT
EXPORTING
TCODE = TFBA
TABLES
DYNPROTAB = BDCTAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
REFRESH BDCTAB
ENDLOOP.
Calling function to close the session
CALL FUNCTION BDC_CLOSE_GROUP
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
Endif.
Endif.
*& Form GENERATE_DATA
Create BDC Data
FORM GENERATE_DATA
Passing information for 1st screen on BDCDATA
BDCTAB-PROGRAM = SAPMTFBA.
BDCTAX-DYNPRO = 100.
BDCTAP-DYNBEGIN = X.
APPEND BCDTAB.CLEAR BDCTAB.
Passing field information to BDCDATA
BDCTAB-FNAM = SCUSTOM-ID
BDCTAB-FVAL = ITAB-ID.
APPEND BDCTAB.CLEAR BDCTAB.
Passing BDC_OKCODE to BDCDATA
BDCTAB-FNAM = BDC_OKCODE.
BDCTAB-FVAL = /5.
APPEND BDCTAB.CLEAR BDCTAB.
Passing screen information for next screen to BDCDATA
BDCTAB-PROGRAM = SAPMTFBA.
BDCTAB-DYNPRO = 200.
BDCTAB-DYNBEGIN = X.
APPEND BDCTAB.CLEAR BDCTAB.
Passing screen information to BDCDATA
BDCTAB-FNAM = SCUSTOM-NAME.
BDCTAB-FVAL = ITAB-NAME.
APPEND BDCTAB.CLEAR BDCTAB.
Passing screen information to BDCDATA
BDCTAB-FNAM = SCUSTOM-CITY.
BDCTAB-FVAL = ITAB-CITY.
APPEND BDCTAB.CLEAR BDCTAB.
Passing BDC_OKCODE to BDCDATA
BDCTAB-FNAM = BDC_OKCODE.
BDCTAB-FVAL = SAVE.
APPEND BDCTAB.CLEAR BDCTAB.
ENDFORM. GENERATE_DATA
AN EXAMPLE WITH CALL TRANSACTION
Same steps to be repeated for CALL TRANSACTION
The only difference between the two types of interface is in Session method, you create session and store information about screen and data into session. When session is processed the data is transferred to database. While in CALL TRANSACTION, data is transferred directly to database table.
REPORT DEMO1.
Follow above Code till MAIN Logic. Even the Subroutine should be copied
LOOP AT ITAB
PERFORM GENERATE_DATA, Populating BDCDATA Table
Call transaction TFBA using BCDDATA Mode A Update S.
REFRESH BDCTAB
ENDLOOP.
regards.
sowjanya.b.

My computer that my ipod was sync to crashed and i have got a new one but i can't sync my ipod without wipping it clean, how do i do it with out lossing the years worth of music

ok, i think i posted all my question in the title LOL, I had sync my ipod to my computer over 2yrs ago, my computer crashe and now i have a new one. It will not let my sync my ipod with out reseting my ipod which will delet everthing on it. The problem is all the songs i bought on itunes is backed up on icloud, but i have alot that is from cds that i know longer have and if i did a reset i would lose all that. I'm a worship leader and children's church leader so alot of these songs i need and use ever week. is there any way i can do this without losing alot?

What did you do with the SIM from the iPhone 4? You need to "activate" the phone, but it does not need to be a SIM that is connected to service. It is just what happens when you update the phone. In this case, activation does not mean to activate it on a cellular carrier, but just to activate the phone so it works. If the SIM is still in the old phone, then follow these instructions and see if that helps. http://support.apple.com/kb/HT3406

How do i enable my iphone with out itunes

how do i enable my iphone with out itunes how do i enable my iphone with out itunes

You need a WiFi connection to activate the iPhone without itunes on a mac/pc.

Is there a way to remove many photos from the iPhone camera roll with out having to delete photos one by one? I need space, it's so full and I've opted out of deleting them when I sync them to my computer in the past.

Since I've transfered all my photos to my computer & added the files that I'd like on my phone in iTunes I'd like to delete the photos from my camera roll on my phone, but there are a lot and I'd like to be able to do it quickly. Is it possible to do this with out having to put each on into the trash on my phone?

*correction*
Arrow in bottom left allows you to multi select. After you choose your photos, you can hit the delete button that appears in the bottom right hand corner. Or, you can hit the cancel button in the rop right and not delete them

Hi, i am new to this iphone 4 and purchased it from craigslist guy with out any password on it but when i came home the itunes app asked me to put davindersihota@icloud password which i neverhave so i contact the seller to give me the password

I asked the guy to give me the password then he dissclosed that it was not his phone and he purchased from another brown guy and that he will contact him the second day he told me, he didnot have the phone number off that guy and i ask him to send an email to that email address ,but he replied no one is answering from this email account .so then i tried to restore the phone with itunes and after restoring the phone is asking to put the password for that [email protected] help me because i called apple but they didnot help me,i understand that this features is for security of i phone users in ios7 updates but what about loyal people who sold their item with out knowing these features or the person who is purchasing this item dont know that it has been protected by password. Apple must figure out some thing for their loyal customers to give them the phone number or email regarding that original phone owners ,or see if the phone is not reported as stolen so in this way they should help to activate that phone .I hope Apple will help people and not to be mean with customers.Thanks for reading is message.

You need the password of the iCloud account/Apple ID that was used to originally set up the phone. That is the activation lock/anti theft feature in iOS 7. There is no way to get around that, except by using the password.
The original seller should have disabled it, but did not. if the seller is unable or unwilling to give you the information rerquired to unlock your phone, the the phone is probably stolen. That is why you have anti theft features in the phone; to avoid a situation similar to yours.
Your phone is worthless. Sorry.

HT4623 But how do i get my phone to activate with itunes?

My Iphone does not activate with my itunes and it does not look the same as other peoples itunes i think my one is the new one as they told me to update. i was halfway through updating my iphone 3gs to make it 4.1 ios but the usb connecter got pulled out. and now all it says on my iphone is unable to activate to itunes... PLEASE HELP!!!!

Plug it in, iTunes running, and either right-click your phone in the left device pane & select "Restore from Backup", or hit the "Restore" button on the Summary Pane to restore as a new device. Follow this by syncing your iTunes content back to your phone.

HT1539 can i add my digital copy to itunes with out using the disk? my netbook does not have a disk drive and i want to add my movie to my ipod can i do it with out the use of the disk and just the code?

Can I add my digital copy movie to my iTunes with out using the disk, my gateway laptop/netbook does not have a disk drive I have the unused code and everything, I just can't stuck the movie into the computer itself and my desktop computer has no internet on it. Is there a way to add my movie to my iPod touch 2nd generation tuning 4.2.1

Hiya!
It depends on what kind of digital copy you have. This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
Transferring video from DVDs with iTunes digital content
http://support.apple.com/kb/HT1539
I hope this helps! Best wishes and good luck!

In MTO   scenario i want to have some materials with out account assignment

Hi,
    In MTO scenario i want to have some components in my BOM to not to get planned with respect to sales order stock / account assignment of specifice sales order( say "C" class items). if i use Consumption based planning" VB" for those
materials it works with manual reorder point planning.but i cannot estimate my correct reorder point for that material.because it is not constant requirement .It varies basing on customer sales order for that period.
   My question is how to plan these components in MTO scenario with out having idea of correct manual reorder point for those materials.
thanks in advance
regards
madan

Madan,
Automatic Reorder Point Planning
In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
Since the forecast is carried out at regular intervals, the reorder level and the safety stock level are continually adapted to the current consumption and delivery situation. This means that a contribution is made towards keeping stock levels low.
So you need to maintain the forecast view for the material. The forecast values comes from consumption data. If the system in place for some time then consuption data will be automatically by the system based on the material issues. I am not sure if you can enter the consumption manually.
Regards
Ram

How do i get through find my i phone with out knowing the past apple id or password?

how do i get through find my i phone with out knowing the past apple id or password?

If the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you. If you recently purchased the iPhone, return it for a refund if you can.
Regards.

CIF activate with out transferring

Similar Messages

Maybe you are looking for