CIF ERROR ;Address incomplete; enter country

Hi Experts
when im trying to cif Material or customer  im getting below error
CIF ERROR ;Address incomplete; enter country
Please suggest ?
Thanks in advance

Hi,
As was mentioned by the expert this is not an error related to the material master. Something that you have in the addess in your customer is missing in APO.
First try to identify what is the customer that is generating the issue. Then check the customer in ECC and review your customizing in APO and ensure you have the country codes and Regions maintained in APO.
SPRO --> SAP NetWeaver --> General Settings --> Set Countries: 
--> Insert Regions
--> Define Country Codes
Kind Regards,
Mariano

Similar Messages

  • I cant save the customer master...error is please enter country

    hi friends
    in the customer i entered the address details..but system again asking to' enter the country '..i cant the save customer master
    with regards
    dinesh

    dear friends
    I entered the country code in the customer master. but it is not save the customer master.
    Again and and again same i entered the country code ..same error coming .........
    Fill in all required entry fields
         Message no. 00055
    Diagnosis
         You have attempted to update data or start an action. However, not all
         required information was specified.
    System Response
         The system could not execute the action.
    Procedure
         Enter all required information. Fields in which you must enter data are
         prefilled with a question mark ("?") by the system. If the current
         screen contains tabs, check all tabs to make sure you have filled in all
         required fields. Then restart the action.
    with regards
    dinesh

  • Connection object - error message : Incomplete address; enter country

    Dear experts,
    I want to to create a Connection Object in the Web IC.
    I enter the address information (with the country) then save.
    The following error message is displayed : "Incomplete address; enter country"
    Has anybody already encountered this problem?
    Do you have any idea how we could solve this?
    Thanks a lot for your help.
    Regards,
    Pascale

    Hi,
    Have you resolved it?
    Regards,
    Vamshi.

  • Incomplete address; enter country (Message no. AM216)

    Hello!
    I try to replicate vendors from the backend system to SRM 5.0 with BBPGETVD and get following message in SLG1: Incomplete address; enter country (Message no. AM216)
    The problem is, that everything worked fine with backend system R/3 4.6C,
    but now after the release change we use ECC 6.0.
    The address is completely maintained in XK03 - even the country.
    When I try to update a vendor, which I alreadey replicated under 46C,
    I get the same message.
    What could be the reason?
    Thanks for help,
    Barbara

    Hi
    Please specify which SRM version are you using ?
    When are you getting this error ? What error logs appear in SLG1 / ST22 Transactions ? Which transaction are you using ?
    <b>Please go through the following SAP OSS Notes -></b>
    Note 930864 SUS: User-BusinessPartner Creation fails in OneClient
    Note 737650 EBP: User synchronization with SAPM UM, form of address
    Note 660940 Display of (error) messages limited to 50 characters
    Note 645237 Vendor replication: Error message without vendor number
    Note 606441 Relationship address of contact person (ext. bus.partner)
    Note 417509 Error number CRM_TAX 104 when creating EBP users
    Note 419423 Repairing incorrect EBP users
    407800 Converting SU01 users to EBP users
    391228 Update terminations when creating a BBP user
    536396 Business partner maintenance: Lock problems BBP 2.0B
    556222 EBP 2.0:Error when creatng businss partnr with indstry sectr
    536713 Business partner maintenance: Lock problems EBP 2.0
    398945 BBPMAININT - Creating contact person, error message NR 028
    390494 Ext. Business partner: telephone/fax/email
    Note 355506 Ext. no. assignment when creating business partners
    <u>Other related OSS Notes -></u>
    Note 652616 Move-in in future does not create any ship-to party
    Note 533198 ALE; distribution one-time accounts w/o country indicators
    Hope this will help.
    Regards
    - Atul

  • App store review page:billing add-country : i choose SL (Selangor). Error message: pls enter at most 3 letter or number for country. But there all is 2 letter. Cannot type ourself, all is preset. so can't create a review

    App store review page:billing address - country : i choose SL (Selangor).
    Error message: pls enter at most 3 letter or number for country.
    But what i can choose is all in 2 letter. Cannot type ourself, all is preset. so can't create a review and cannot use my app id to download or update application.

    madeline leo wrote:
    App store review page:billing address - country : i choose SL (Selangor).
    Error message: pls enter at most 3 letter or number for country.
    But what i can choose is all in 2 letter. Cannot type ourself, all is preset. so can't create a review and cannot use my app id to download or update application.
    Please enter at most 3 letters or numbers.  Two letters is fine with that instruction.

  • Groupware: rejection error 'Enter country'

    Hi group! I'm trying to replicate Contacts from GW to CRM, but I'm getting the rejection error 'Enter country'. If I leave blank the address field, business partner replicates ok.
    I've already uploaded the gwa_country customizing object to GW, but I still get the error.
    Thanks a lot!
    Regards,
    Jorgelina

    Hi,
    Check for the following points
    Applying filter conditions to the customizing object
    GWA_COUNTRY :
    ->filters should be set  for tables T005T and T005U
    ->To set the fiters ,enter the transaction r3ac3,
    ->choose Object Name GWA_COUNTRY and enter the change mode
    ->set block size to 100
    ->choose the tab Tables/Structures
    ->the various tables are displayed here
    ->choose  Fiter settings for the table T005T
    ->here choose CRM for the Source Site Name
    ->set the following fiters
    1)Field - SPRAS
    2)Op - Equality (= LOw)
    3)LOW EN
    Repeat steps for the table T00U
    Download GW* object from Source Site CRM to the MBDOC Destintion Site in
    transation r3as.
    Restart J2EE Engine of MapBox and Click "Start" on MapBox launch page
    after the engine is up.
    To cross check if GWA_COUNTRY has been downloaded or not successfully
    please do the following steps:
    1)Go to transaction se17.
    2)Enter table MBMANDTSTORE.
    3)Enter "Customizing" in column MBGROUP.
    4)Press F8.
    5)Check if GW_COUNTRY_MAP customizing is present.
    Check the scenario again and let us know if it worked.
    Regards
    Praveen

  • SIP Error 484 Address Incomplete.

    Hello,
    Some users complain that some calls doesn't works...
    I have check the monitoring and I can see that calls have a SIP error 484 : Gateway responded with 484 Address Incomplete.
    My mediation server was directly connect to the provider gateway, I have open a ticket to their support, but I have no return for the moment.
    I didn't see any error in the event viewer of mediation server.
    All my users concerned by this problem have their line uri filled correctly.
    In waiting their answer, can I verify something in the Lync environnement ?
    Thanks,

    Are these for inbound calls or outbound calls or both?  Is it always the same number that fails?  Can you reproduce the issue by having the user call the number that failed again?  Are you normalizing to E.164 on the gateway as well as your
    Lync dial plan?  For outbound calls, I'd verify that you're normalizing all calls to E.164 format before sending it to the gateway so that it never receives a partial phone number.  I'd also confirm that the gateway is normalizing numbers coming
    from Lync into a format your telephone company will accept if they don't accept E.164.  For inbound calls, I'd ensure that all calls coming from the gateway are formatted as E.164.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • HT2731 why do i get an error message when entering my credit card information?

    why do i get an error message when entering accurate credit card information?

    If you would like help from these forums then saying what the error message is would be useful.
    The card is registered to exactly the same name and address as you have on your iTunes account ? And it was issued by a bank in the country where you and your iTunes account are ?

  • Viewing CIF errors in SMQ2 - Technical - ABAP

    Hello All - I am CIFing the Master data from ECC to APO and i am getting the error. I was debugging the CIF from SMQ2 and i donot see any issue in the code but i am still getting the error in SMQ2 and i could not see the complete error message in SMQ2.Because of the limited space for the field Status  in SMQ2.
    My question is there any way to read/view the entire message in QRFC ? What is the Tcode ?  or Where can i see the CIF error messages in APO..
    Appreciate your help.
    Thanks,
    Venky.
    Edited by: GVP2011 on Mar 21, 2011 3:42 AM

    Hi Venky,
                   You can see the CIF error messages in /SAPAPO/C3 transaction in APO and CFG1 in ECC.Here you can directly enter the External ID from SMQ2 or you can see all the error messages via Object "CIFSCM".
    I hope this will help you.
    Regards,
    Saurabh

  • "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

    Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
    There is no documentation on how to solve this anywhere.
    I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
    Any help would be much appreciated
    Kenneth

    New to BTMM, I got stung today with the silly DNS problem message. Solution:
    1) Flush DNS cache with:
    dscacheutil -flushcache;sudo killall -HUP mDNSResponder
    2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
    Edit #1
    Apologies for the noise. The warning has come back
    Edit #2
    Just found out that BTMM is not compatible with double NAT. That's not helpful.
    http://support.apple.com/kb/TS1208

  • There is no server available at the address you entered, codes: 25294, 9848

    About a month ago I rebooted the server and after that Server Admin hasn't worked. It says always: "There is no Server available at the address you entered".
    In /var/log/system.log:
    Jul 22 11:58:51 mail servermgrd[14205]: SecIdentitySearchCopyNext returned -25294.
    Jul 22 11:58:51 mail servermgrd[14205]: Got error -9848 for SSLHandshake
    Jul 22 11:58:51 mail servermgrd[14205]: Exception in threadListen: Socket: Connect failed
    From http://developer.apple.com/documentation/Security/Reference/certifkeytrustservic es/Reference/reference.html:
    errSecNoSuchKeychain –25294 The keychain does not exist.
    From http://developer.apple.com/documentation/security/Reference/secureTransportRef/R eference/reference.html:
    errSSLBadConfiguration –9848 A configuration error occurred.
    I have also bootable backup on another disk in which Server Admin is working. I have compared files from /etc, /Library/Preference and /var/servermgrd without finding really relevant differences. Are there other places I should seek?
    On some point I have changed host name. Could that cause certificate error in this case? I have checked with "sudo changeip -checkhostname" that names matches.
    I have tried making servermgrd to use regular connection instead of SSL by editing /Library/Preferences/com.apple.servermgrd.plist. After changing settings, I have killed or unloaded/loaded servermgrd and tested with lsof that proper port is working. But I guess Server Admin doesn't even try to connect to port 687. Is it possible to force Server Admin to connect port 687. E.g. writing "localhost:687" as address didn't worked.
    I have tried creating servermgrd.conf, ssl.crt/ and ssl.key/ to /etc/servermgrd/ even thought they weren't there originally.
    I have tried connecting with many different IPs and DNS names and done as instructed here http://support.apple.com/kb/TS2757. According lsof, ports 678 and 660 are not in use normally.
    I have tried moving/trashing /var/servermgrd/ and ~/Library/Preferences/com.apple.ServerAdmin.plist.
    I have tried stopping ipfilter.
    Is it possible find out that which certificate servermgrd is trying to use?
    What else I could try? The server is currently running email and web services among other things with many users, so therefore I can't try too rough methods.

    Little progress maybe...
    I tested Server Admin of the working backup while using "sudo fs_usage -f filesys <PID>".
    When I did same with the actual nonworking server I noticed this difference:
    18:53:09 statfs private/var/root/Library/Keychains 0.000010 servermgrd
    18:53:09 open private/var/root/Library/Keychains>>>>>>>>>> 0.000008 servermgrd
    Path /var/root/Library/Keychains does not exists and backup system doesn't seems to try to use it. I suspect that "errSecNoSuchKeychain –25294 The keychain does not exist" occurs because of this.
    Any hints to fix this?

  • CIF Error while transferring vendor

    We are facing CIF error while transferring vendor master to APO.
    The issue is in e-mail address of the vendor master.
    One way is to correct the e-mail addresses - one per line without semicolon at the end.
    But the issue list is very huge to get it corrected.
    Is there any other way by which we can exculde the e-mail addresses or its validation?
    Thanks and regards,
    Sushant

    Hi Senthil,
    The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
    Apreciate your kind reply, though. Thanks a lot.
    Warm regards,
    Sushant

  • CIF errors due to material status

    Hi All,
    We are having lot of CIF errors due to material status "40" in CIF, which restrict creation of P.reqs and PO at source location.
    Eg:- LOC1 is a manufacturing location and LOC2 is a Distribution centre. A new Product A introduced at both location, having status status "40" at both the location.
    When APO creates P.Reqs with source as LOC1 and Destination as LOC2 for this product, these p.reqs get stuck in CIF queue, as plant specific status "40" doesn't allow creation of P.Reqs at LOC1 in ECC.
    We thought of creating a new status "Z1", which would allow the creation of P.Reqs and PO. But the requirement was to allow only creation of P.Reqs and not PO. But in the config setting in ECC for material status there is common setting for P.Reqs and PO and cannot be differentiated.
    Have anybody come across such problem and whats the way to address this issue.
    Thanks & Regards
    Shankar

    Hi Shankar,
    Please check list of enahncements  in SMOD transaction. The enhacements related to Purchase documents start with "CIFPUR.."
    Or other path in SPRO is as below:
    In the ERP system under Integration with Other SAP Components >> Advanced Planning and Optimization >> Application-Specific Settings and Enhancements >>Settings and Enhancements for External Procurement.
    Because of the  blocked status of the material ,while transferring the PR/PO data,  the CIF prrogram -function call  for creating the purchasing document does not get triggered.   As written in earlier mail, the enhancement on SAP ECC  inbound  may not help, because, the material status is picked up from ECC ( or SAP R/3) material master data  and not  taken  from APO.
    Neverthless, you may please have a look at these enhancements.
    I hope this gives insight to you.
    Regards
    Datta

  • Error message F5901-Enter Business Place Value

    Hello Friends and experts,
    I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
    The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
    I have checked the customizing. We have not activated Business Place functionality for any country in our system.
    I did not even find any SAP note in this regards.
    Does someone has any clue on what may be wrong and how to fix it?
    Regards,
    Vishal.

    Hi Tanmay,
    You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
    Thanks

  • How do i get iPhone to stop prompting me to enter country?

    I'm using the Iphone 5s and when I enter the address of a contact, I keep getting prompted to enter country and a list of the world's countries appear.   After I scroll all the way down to United States and select it, I still get that promp when editing the contact's address.  It's a nuisance.  Does anyone know how to get this to stop?

    Nah, dealt with him before.  He is only prepared to help if it will make him an overnight profit of millions, otherwise he couldn't care less.  I'll just speak to a solicitor about whether I have a legal case against them or not, and if I do, I'll take Ian Livingston personally to court, after all, he is the boss and therefore responsible for actions of employees acting on behalf of the company.

Maybe you are looking for